Total 14 front desk officer job vacancies in Singapore

Position:

Our team is starting an exciting project to develop RF/mm-wave ICs for the future of communication for Beyond-5G to 6G applications. We are looking for an exceptional candidate with relevant expertise to join us. Our team focuses on developing communication modules for both terrestrial and non-terrestrial needs. You will work at the Institute of Microelectronics (IME) to create the most advanced semiconductor technologies. You will collaborate with world-leading industries and academic institutions on innovative designs and strategic intellectual properties.

Job Responsibility:

• Benchmarking with datasheets, prior arts, and latest academic work.
• In-depth design and analysis with electrical/electromagnetic simulations.
• In-depth analysis of design robustness, optimization, and testability.
• In-depth presentations and report recording of design, layout, test and measurement, and fault analysis.
• Working independently, as a team, and with collaborators from industry and academic backgrounds.

Pre-requisites:

• A Master’s / PhD Degree in Electronics or Electrical Engineering and proven academic and industry experience are pluses.
• Experienced in designing RF/mmWave such as LNA, mixer, PA, buffer, transmission line, baluns, PLL, VCO, etc.
• Experienced in designing base-band/mixed-signal circuits, such as amplifiers, bandgap, ADC, DAC, etc., is a plus.
• Knowledgeable in design trade-offs at the circuit-level specification.
• Experienced in designing in CMOS and SiGe technology or any other technologies like RF-SOI and compound-semiconductor is a plus.
• Proficient in using Cadence and EM tools like ADS for EM circuit simulation, IC layout, LVS, and DRC verification.
• Familiarity with IC measurement and debugging and hands-on experience with RF/mmWave equipment such as spectrum analyzer, network analyzer, oscilloscope, and probe station.
• Good publication record with a strong awareness of state-of-the-art.
• Good communication and teamwork.

Position:

Our team is starting an exciting project to develop RF/mm-wave ICs for the future of communication for Beyond-5G to 6G applications. We are looking for an exceptional candidate with relevant expertise to join us. Our team focuses on developing communication modules for both terrestrial and non-terrestrial needs. You will work at the Institute of Microelectronics (IME) to create the most advanced semiconductor technologies. You will collaborate with world-leading industries and academic institutions on innovative designs and strategic intellectual properties.

Job Responsibility:

• Benchmarking with datasheets, prior arts, and latest academic work.
• In-depth design and analysis with electrical/electromagnetic simulations.
• In-depth analysis of design robustness, optimization, and testability.
• In-depth presentations and report recording of design, layout, test and measurement, and fault analysis.
• Working independently, as a team, and with collaborators from industry and academic backgrounds.

Pre-requisites:

• A Master’s / PhD Degree in Electronics or Electrical Engineering and proven academic and industry experience are pluses.
• Experienced in designing RF/mmWave such as LNA, mixer, PA, buffer, transmission line, baluns, PLL, VCO, etc.
• Experienced in designing base-band/mixed-signal circuits, such as amplifiers, bandgap, ADC, DAC, etc., is a plus.
• Knowledgeable in design trade-offs at the circuit-level specification.
• Experienced in designing in CMOS and SiGe technology or any other technologies like RF-SOI and compound-semiconductor is a plus.
• Proficient in using Cadence and EM tools like ADS for EM circuit simulation, IC layout, LVS, and DRC verification.
• Familiarity with IC measurement and debugging and hands-on experience with RF/mmWave equipment such as spectrum analyzer, network analyzer, oscilloscope, and probe station.
• Good publication record with a strong awareness of state-of-the-art.
• Good communication and teamwork.

We are seeking candidates for the position of Research Officer for the Circular Bioeconomy team, part of the Biotransformation Group at the Singapore Institute of Food and Biotechnology Innovation (SIFBI). The Circular Bioeconomy team performs Research & Development in biotechnological approaches to waste valorisation, alternative protein and carbon-reduction. The mission is to provide biotechnological solutions for achieving Singapore?s ambitious goals of Zero Waste, Food Security and Net Zero emissions.

Job Description:

• Perform laboratory experiments for Circular Bioeconomy projects, such as microbial isolation, flask fermentation, bioreactor fermentation and analysis using assays, analysers, chromatography and quantitative PCR.
• Plan experimental work in close collaboration with supervisor. More experienced candidates will have greater independence in planning, executing and trouble-shooting their own work.
• Analyse, organise and summarise experimental results for reporting to supervisor. More experienced candidates will have greater freedom in interpreting, evaluating and reporting results to stakeholders.
• Maintain laboratory and equipment in good and productive order, such as purchasing consumables, organising and tidying lab, maintaining equipment and writing SOPs.
• Uphold high safety and integrity standards, complying with all HSEP (Health, Safety and Environmental Protection) rules and regulations, as well as SIFBI internal rules.

Job Requirements:

• Bachelor's degree in food science or Life Sciences, such as Biotechnology.
• Previous work or internship experience with laboratory work is preferable.
• Experience and preference for hands-on experimental work in a laboratory.
• Experience with microbiological and aseptic techniques. Experience with fermentation and bioreactors is advantageous.
• Experience with analytical techniques such as biochemical assays, spectroscopy and chromatography. Experience with PCR techniques is advantageous.
• Experience with software tools such as MS Office, Teams, MatLab, MiniTab, and various proprietary scientific soft wares such as for biotechnological and analytical equipment.
• The ideal candidate is passionate about science and sustainability, self-motivated, organised, detail-oriented, and has excellent communication and teamwork skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Are you passionate about electrochemistry and surface technologies, and eager to make an impact in a cutting-edge research environment? Join our team as a Lab Officer (surface technology) and play a critical role in managing our state-of-the-art surface laboratory. In this exciting position, you'll be at the heart of innovative research, supporting project teams with your technical expertise, organizational skills, and proactive problem-solving abilities. You will oversee the lab's daily operations, support experimental activities, and contribute to groundbreaking electrochemical and surface technology R&D.

Job Description:

The Laboratory Officer will be responsible for managing day-to-day operations within the electrochemical lab and providing essential support to ongoing projects. The role requires a good level of technical proficiency in electrochemical techniques, excellent organizational skills, and a proactive approach to problem-solving. The Laboratory Officer will work closely with the project teams to ensure smooth and safe functioning of the lab and timely completion of tasks. Key responsibilities include:

Lab Management:

• Oversee the day-to-day operations of the electrochemical lab, including equipment maintenance, inventory management, and safety protocols.
• Ensure that the lab is well-equipped and stocked with necessary materials and supplies for ongoing experiments and projects.
• Coordinate with vendors for procurement of equipment/chemicals and supplies as needed.
• Maintain a clean and safe working environment in accordance with laboratory standards and regulations.

Experimental Support:

• Assist researchers and project teams with experimental setup, data collection, and analysis.
• Characterizations of surfaces and coatings in terms of mechanical, physical and chemical properties, as well as coating performance evaluation.
• Troubleshoot technical issues and provide guidance on experimental procedures as required.
• Conduct routine calibration and maintenance of electrochemical equipment to ensure accuracy and reliability of results.
• Document experimental procedures, results, and observations in detailed lab reports.

Project Support:

• Collaborate with project teams to support the execution of research projects related to electrochemical applications.
• Manage project timelines and deliverables to ensure that milestones are met in a timely manner.
• Communicate regularly with project stakeholders to provide updates on progress and address any concerns or challenges that arise.

Training and Development:

• Provide training and guidance to new lab members on proper laboratory techniques, safety procedures, and equipment operation.
• Stay informed about advancements in electrochemical technology and techniques through literature review and professional development activities.
• Share knowledge and best practices with other members of the research team to enhance overall productivity and efficiency.

Job Requirements:

• Diploma or equivalent qualification in Chemistry, Chemical Engineering, Materials Science, or a related science and engineering field.
• Proven experience working in a laboratory setting, preferably with a focus on electrochemistry.
• Strong understanding of electrochemical principles and techniques, including cyclic voltammetry, impedance spectroscopy, and potentiostatic/galvanostatic measurements.
• Proficiency in operating and troubleshooting electrochemical equipment such as potentiostats, electrochemical cells, and electrodes.
• Excellent organizational skills and attention to detail, with the ability to manage multiple tasks simultaneously and prioritize effectively.
• Strong communication and interpersonal skills, with the ability to work collaboratively in a team environment.
• Commitment to maintaining a safe and compliant laboratory environment, with knowledge of relevant safety regulations and procedures.
• Flexibility to adapt to changing project requirements and priorities, with a proactive approach to problem-solving.
• Ability to work independently with minimal supervision, while also contributing effectively to a dynamic research team.

Note: Some of above requirements are optional but advantageous to have.

Job Description:

Be part of an exciting Team working on cutting-edge advanced packaging process technologies. Partner and work with various FAB users, to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production. Responsibilities will also include assisting in operations support in FAB clean rooms to make sure all rounded supports are provided.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, and professional individual.
• Oversee the Team spare/ chemicals / inventories stores – upkeep with good house-keepings, periodic cycle counts. Maintain the inventory database, ensuring timely and accurate recordings, raise purchase requests accordingly.
• Take charge and provide day to day supports in all logistics needs and initiate material/spare parts procurement when required to ensure smooth Fab operations.
• Accountable for the inventory movements required to enable smooth lot operations across IME Premises.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time.
• Work seamlessly with various stakeholders to provide logistics support and deliver inventory on time.
• Work towards and employ critical thinking, put-up good initiatives to move forward to digitalization.
• Ability to work in a multi-task environment.

Experience:

• Education: Diploma in engineering discipline. Preferably in supply chain logistic/ warehouse operations.
• At least 2 years of warehouse operations.
• Preferably some experience in semiconductor / manufacturing environment, with good wide contacts with semiconductor material suppliers, equipment vendors.
• Strong knowledge-based on excel skills and some knowledge of supply chain analytics.

Are you passionate about electrochemistry and surface technologies, and eager to make an impact in a cutting-edge research environment? Join our team as a Lab Officer (surface technology) and play a critical role in managing our state-of-the-art surface laboratory. In this exciting position, you'll be at the heart of innovative research, supporting project teams with your technical expertise, organizational skills, and proactive problem-solving abilities. You will oversee the lab's daily operations, support experimental activities, and contribute to groundbreaking electrochemical and surface technology R&D.

Job Description:

The Laboratory Officer will be responsible for managing day-to-day operations within the electrochemical lab and providing essential support to ongoing projects. The role requires a good level of technical proficiency in electrochemical techniques, excellent organizational skills, and a proactive approach to problem-solving. The Laboratory Officer will work closely with the project teams to ensure smooth and safe functioning of the lab and timely completion of tasks. Key responsibilities include:

Lab Management:

• Oversee the day-to-day operations of the electrochemical lab, including equipment maintenance, inventory management, and safety protocols.
• Ensure that the lab is well-equipped and stocked with necessary materials and supplies for ongoing experiments and projects.
• Coordinate with vendors for procurement of equipment/chemicals and supplies as needed.
• Maintain a clean and safe working environment in accordance with laboratory standards and regulations.

Experimental Support:

• Assist researchers and project teams with experimental setup, data collection, and analysis.
• Characterizations of surfaces and coatings in terms of mechanical, physical and chemical properties, as well as coating performance evaluation.
• Troubleshoot technical issues and provide guidance on experimental procedures as required.
• Conduct routine calibration and maintenance of electrochemical equipment to ensure accuracy and reliability of results.
• Document experimental procedures, results, and observations in detailed lab reports.

Project Support:

• Collaborate with project teams to support the execution of research projects related to electrochemical applications.
• Manage project timelines and deliverables to ensure that milestones are met in a timely manner.
• Communicate regularly with project stakeholders to provide updates on progress and address any concerns or challenges that arise.

Training and Development:

• Provide training and guidance to new lab members on proper laboratory techniques, safety procedures, and equipment operation.
• Stay informed about advancements in electrochemical technology and techniques through literature review and professional development activities.
• Share knowledge and best practices with other members of the research team to enhance overall productivity and efficiency.

Job Requirements:

• Diploma or equivalent qualification in Chemistry, Chemical Engineering, Materials Science, or a related science and engineering field.
• Proven experience working in a laboratory setting, preferably with a focus on electrochemistry.
• Strong understanding of electrochemical principles and techniques, including cyclic voltammetry, impedance spectroscopy, and potentiostatic/galvanostatic measurements.
• Proficiency in operating and troubleshooting electrochemical equipment such as potentiostats, electrochemical cells, and electrodes.
• Excellent organizational skills and attention to detail, with the ability to manage multiple tasks simultaneously and prioritize effectively.
• Strong communication and interpersonal skills, with the ability to work collaboratively in a team environment.
• Commitment to maintaining a safe and compliant laboratory environment, with knowledge of relevant safety regulations and procedures.
• Flexibility to adapt to changing project requirements and priorities, with a proactive approach to problem-solving.
• Ability to work independently with minimal supervision, while also contributing effectively to a dynamic research team.

Note: Some of above requirements are optional but advantageous to have.

Job Description:

Are you eager to dive into the world of cutting-edge electronics? Join us as a Heterogeneous Integration Assistant Laboratory Officer/laboratory Officer and become a key player in advancing next-generation technology. In this role, you’ll gain hands-on experience with state-of-the-art equipment and contribute to groundbreaking research in electronic module integration.

Key Responsibilities:

• Heterogeneous Integration: Engage in the complete processes of semiconductor package assembly, including die preparation (dicing and back-grinding)
• Equipment Operation: Operate and maintain various high-tech instruments/equipment used in the heterogeneous integration processes, ensuring they are in optimal condition and ready for use.
• Process Support: Manage equipment readiness, and ensure the availability of processing materials, and support assembly lap operations
• Inspection and Analysis: Conduct metrology inspections and analyse colour coded data to ensure the highest quality of assembly processes

What You’ll Gain:

• Cutting-Edge Experience: Work on the latest assembly and packaging equipment in heterogeneous integration and contribute to innovative research in advanced electronics.
• Professional Growth: Receive hands-on training on assembly & packaging equipment operations and mentorship from experienced professionals, with opportunities for career development within a forward-thinking company.
• Collaborative Environment: Be part of a dynamic team that values your input and fosters a culture of learning and collaboration.

Qualifications:

• Diploma or ITE graduate in Materials Science, Mechanical Engineering, Chemical Engineering, Chemistry, Electrical Engineering, or Electronics.
• We value enthusiasm and a willingness to learn over extensive experience.
• Strong communication skills, industry awareness, and problem-solving abilities.
• Highly motivated and a proactive self-starter with the ability to work effectively in a team.

Why Join Us?:

At "Institute of Microelectronics", we are dedicated to developing talent and providing our team members with the tools and support they need to succeed. We offer a vibrant and inclusive work environment where innovation thrives. Enjoy a range of benefits including ongoing training, career progression opportunities, and the chance to work on pioneering projects.

Apply today and start your journey with us in the exciting field of heterogeneous integration!

Key Responsibilities:

• Prepare and organize laboratory materials, reagents, and samples for experiments.
• Assist in the setup and operation of lab equipment such as precision milling machine, laser cutting machine and 3D printing machine.
• Set up and calibrate laboratory equipment and instruments.
• Conduct routine maintenance and cleaning of laboratory equipment.
• Monitor inventory levels of laboratory supplies and place orders for replenishment when necessary.
• Assist scientists and engineers in research projects and training courses, contributing to experiments and investigations.
• Collect, record, and analyse experimental data using laboratory techniques and instrumentation.
• Prepare and maintain detailed records of experimental procedures, observations, and results.

Qualifications and Skills:

• Certificate or diploma relevant to Computer Numerical Controlled (CNC)
• Previous experience working in a laboratory setting, preferably in a research or academic environment.
• Familiarity with laboratory equipment and instrumentation such as milling machine and microscopes.

We value the following soft skills:

• Strong attention to detail and accuracy in performing laboratory tasks and recording data.
• Strong organizational skills and the ability to multitask effectively in a fast-paced environment.
• Good communication skills and the ability to work collaboratively in a team-oriented setting.
• Knowledge of laboratory safety protocols and procedures.

Key Responsibilities:

• Prepare and organize laboratory materials, reagents, and samples for experiments.
• Assist in the setup and operation of lab equipment such as precision milling machine, laser cutting machine and 3D printing machine.
• Set up and calibrate laboratory equipment and instruments.
• Conduct routine maintenance and cleaning of laboratory equipment.
• Monitor inventory levels of laboratory supplies and place orders for replenishment when necessary.
• Assist scientists and engineers in research projects and training courses, contributing to experiments and investigations.
• Collect, record, and analyse experimental data using laboratory techniques and instrumentation.
• Prepare and maintain detailed records of experimental procedures, observations, and results.

Qualifications and Skills:

• Certificate or diploma relevant to Computer Numerical Controlled (CNC)
• Previous experience working in a laboratory setting, preferably in a research or academic environment.
• Familiarity with laboratory equipment and instrumentation such as milling machine and microscopes.

We value the following soft skills:

• Strong attention to detail and accuracy in performing laboratory tasks and recording data.
• Strong organizational skills and the ability to multitask effectively in a fast-paced environment.
• Good communication skills and the ability to work collaboratively in a team-oriented setting.
• Knowledge of laboratory safety protocols and procedures.

Job Description

SIMTech is looking for a highly motivated, quick learner with excellent interpersonal skills to join Additive Technology Innovation (ATI) Group. The successful candidate will have opportunities to participate in research and industry projects in additive manufacturing (AM) and be involved in a highly challenging and dynamic research and development environment by working with scientists and engineers. The lab officer’s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group’s research activities through procurement, equipment maintenance, risks assessments, including:

• Hand-on work such as preparing, operating and unpacking AM printers.
• Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.
• Tracking and managing lab and group’s resource utilization, procurement, and delivery.
• Storage space management and optimization.
• Ensure high operational readiness by liaising with vendors to troubleshooting breakdowns preventive maintenance, and repairs.
• Facilitating mechanical and electrical installations for new equipment.
• Assist in lab equipment operation, collection of process data and analysis of results.
• Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.
• Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Job Requirements

• Polytechnic / Technical Diploma degree in Engineering.
• Strong hands-on capabilities.
• Meticulous attention to detail.
• Diligent and possess a positive work attitude.
• Good communication skills.
• Proficient in Microsoft Office.
• Open attitude to lifelong learning and adapts well to new technologies.
• In-depth knowledge / hands-on experience in design for additive manufacturing (DfAM), CAD-based modelling, fusion or sinter-based additive manufacturing processing & metallurgy will be an added advantage.

Job Description

SIMTech is looking for a highly motivated, quick learner with excellent interpersonal skills to join Additive Technology Innovation (ATI) Group. The successful candidate will have opportunities to participate in research and industry projects in additive manufacturing (AM) and be involved in a highly challenging and dynamic research and development environment by working with scientists and engineers. The lab officer’s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group’s research activities through procurement, equipment maintenance, risks assessments, including:

• Hand-on work such as preparing, operating and unpacking AM printers.
• Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.
• Tracking and managing lab and group’s resource utilization, procurement, and delivery.
• Storage space management and optimization.
• Ensure high operational readiness by liaising with vendors to troubleshooting breakdowns preventive maintenance, and repairs.
• Facilitating mechanical and electrical installations for new equipment.
• Assist in lab equipment operation, collection of process data and analysis of results.
• Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.
• Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Job Requirements

• Polytechnic / Technical Diploma degree in Engineering.
• Strong hands-on capabilities.
• Meticulous attention to detail.
• Diligent and possess a positive work attitude.
• Good communication skills.
• Proficient in Microsoft Office.
• Open attitude to lifelong learning and adapts well to new technologies.
• In-depth knowledge / hands-on experience in design for additive manufacturing (DfAM), CAD-based modelling, fusion or sinter-based additive manufacturing processing & metallurgy will be an added advantage.

Key responsibilities:

* Technical Support:

• Work closely with research scientiest and engineers to support R&D projects in advanced manufacturing technologies.
• Identify and recommend appropriate characterization techniques, test standard and methodology for projects.
• Perform sample preparation, equipment operation, data collection and report for metallurgical analysis, materials characterization and measurement.
• Operate and maintain analytical and test equipment, such as cross-section polisher, optical microscope with image processing software, mechanical tester, profilometer and spectrometers.

* Lab Management and day-to-day operations

• Maintain lab equipment in good working condition, lab consumables are adequately stocked and well managed.
• Source and purchase new equipment, modules and accessories.
• Prepare and update lab safety document RA/SWP. Implement and maintain 5S in the lab.
• Provide training and advice for lab equipment users.

Requirements:

• Diploma in Materials, Chemistry, Mechanical Engineering, or equivalent.
• Good communication skills.
• Self-motivated with a positive work and learning attitude.
• Team player who thrives in a collaborative environment

Key responsibilities:

* Technical Support:

• Work closely with research scientiest and engineers to support R&D projects in advanced manufacturing technologies.
• Identify and recommend appropriate characterization techniques, test standard and methodology for projects.
• Perform sample preparation, equipment operation, data collection and report for metallurgical analysis, materials characterization and measurement.
• Operate and maintain analytical and test equipment, such as cross-section polisher, optical microscope with image processing software, mechanical tester, profilometer and spectrometers.

* Lab Management and day-to-day operations

• Maintain lab equipment in good working condition, lab consumables are adequately stocked and well managed.
• Source and purchase new equipment, modules and accessories.
• Prepare and update lab safety document RA/SWP. Implement and maintain 5S in the lab.
• Provide training and advice for lab equipment users.

Requirements:

• Diploma in Materials, Chemistry, Mechanical Engineering, or equivalent.
• Good communication skills.
• Self-motivated with a positive work and learning attitude.
• Team player who thrives in a collaborative environment

A*STAR Infectious Diseases Labs (A*STAR ID Labs) is seeking for a Research Officer to join us in our mission to be a leading centre of infectious diseases research. A*STAR ID Labs aims to develop a cohesive A*STAR response to drive and deliver translational infectious diseases research to better health and economic outcomes.

The candidate will be joining the Antimicrobial Chemical Biology Lab, a newly established group in A*STAR ID Labs focusing on the development of synthetic antimicrobial compounds for potential therapeutic applications. Scholarship opportunities will be available for those interested in pursuing further education at the master’s or PhD level.

Research projects will encompass various tasks such as:

• Chemical synthesis
• In vitro activity testing
• Understanding mechanisms of action
• In vivo efficacy evaluation.
• Support the team in lab operation
• Upkeep of consumables
• Safety oversight
• Labware procurement
• Documenting experimental procedures and results.

Job Requirements:

• Bachelor’s degree in microbiology, biomedical science, chemistry, chemical engineering, bioengineering, or related field
• Familiarity with basic microbiology (e.g., bacteria/fungi culture, agar plating, PCR) and chemistry (e.g., reaction setup, column purification, HPLC) lab techniques, programming, and/or common graphics software (e.g., Photoshop) will be advantageous.
• Highly motivated and passionate about scientific research
• Good spoken and written communication skills
• Team player
• Receptive and detail-orientated

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.