Total 131 job vacancies by Applied Materials South East Asia Pte. Ltd.

Key Responsibilities

1. Support enquiries for Employment Terms and Conditions (and country specific provisions)
2. Point Mgrs./EE's to information on enquiry of HR Programs/Policies/Processes/Systems
3. Provide admin support on EE Separations
4. Admin role in ER documentation
5. Admin support for Mobility requirements
6. Admin support for Staffing needs
7. Provide information to Mgrs./Employees with enquiry on resources avail for development needs
8. Admin support on Payroll tasks
9. Admin support enquiries on Rewards programs

Functional Knowledge

• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline

Business Expertise

• Applies general knowledge of business developed through education or past experience

Leadership

• No supervisory responsibilities; accountable for developing technical contribution

Problem Solving

• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments

Impact

• Has limited impact on own work team; works within standardized procedures and practices to achieve objectives and meet deadlines

Interpersonal Skills

• Exchanges straightforward information, asks questions and checks for understanding

Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software
5. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

Supervise, Lead, motivate, direct, develop and train a team of production employees. Assigns work and sets priorities for employees. Provides technical expertise and managerial leadership. Effectively communicates daily crossovers and build/test issues across all levels of Manufacturing.

Prioritizes production schedules based on available manpower, equipment efficiency, capacity and materials requirements.

Leads operational meetings; establish consistency in processes, and ensure alignment of tactical and/or strategic plans. Develops and tracks key organization performance metrics to meet or improve cycle time performance. Schedules and conducts milestone meetings.

Ensures timely response to operations issues impacting customer satisfaction; acts as an interface in the establishment of and ensuring conformance to customer/vendor requirements; prepares detailed analysis of cost of quality opportunity and initiates corrective action.

Actively strives to prevent employee accidents and injuries. Responsible for ensuring and documenting that all department employees (including temporaries) receive and follow appropriate department training including Environmental, Health and Safety training. Implements, emphasizes importance of, and monitors compliance to appropriate safety policies and procedures.

Develops personnel to include training and career development; manages the performance management process to include the development of team and individual goals, implementing employee development plans, and coaching. Manages the employee selection, hiring, reward and discipline processes.

Analyzes and plans for maximum production capacity optimization; implements and monitors manufacturing or dept. processes that collect, analyze and report key measurement data and real time status.

Identifies process and quality changes designed to improve manufacturing or department capabilities. Drives Lean, Safety and Quality. Takes corrective action.

Other Requirements: This position may require standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools.

Additionally, because this position also may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Works on issues where analysis of situation or data requires review of relevant factors

Business Expertise

• Receives assignments in the form of objectives with goals and the process by which to meet goals. Recommends changes to unit or sub-unit policies. Management reviews work to measure meeting of objectives

Leadership

• Provides direction to employees according to established policies and management guidance. Administers company policies that directly affect subordinate employees

Problem Solving

• Exercises judgment within defined procedures and policies to determine appropriate action.

Impact

• Erroneous decisions or failure to achieve results will cause delays in schedules.

Interpersonal Skills

• Interaction normally requires the ability to gain cooperation of others, conducting presentations of technical information concerning specific projects or schedules.

Position requires understanding of Applied Materials global Standards of Business Conduct and compliance with these standards at all times. This includes demonstrating the highest level of ethical conduct reflecting Applied Materials' core values.

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components
• Performs electro-mechanical assembly operations, troubleshooting and repair
• Identifies and corrects errors
• Observes all safety standards and maintain a secure, safe, clean and healthy work environment
• Attends required health and safety training and follows safety and security policies, procedures and practices
• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept
• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly
• Actively strives to prevent accidents and injuries
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components
• Enters data on computer terminal, such as progress, work expense and labor details
• May perform computer programming, repair or software
• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities
• Has good understanding of how the team integrates with others
• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods
• Good communication skills to exchange of information

*Please submit with detailed CV stating current, expected salary, and notice period

*Only shortlisted candidates would be notified

Key Responsibilities

Performs standard Tier I procedures including wafer measurement.

Performs preventative maintenance and wet cleans independently. Assists senior engineers with corrective maintenance as needed.

Disassembles, cleans and rebuilds kits as part of kit management quality.

Learns and applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers.

Able to diagnose and resolve basic technical problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Has the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining a neat and orderly work area. Demonstrates a positive attitude in less than optimal customer situations.

Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

​

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

Forecasts financial, manpower, and operational requirements for key businesses (start up, warranty, service agreements, paid service). Identifies and pursues service agreement business in conjunction with marketing and sales.

Manages start ups in terms of time and cost requirements. Manages local inventories and RMA procedure. Maintains DSO according to goal. Manages systems start up and warranty cost under reserve.

Ensures customer satisfaction with Company service and system performance.

Interviews, hires, and trains customer engineers as necessary to support regional business.

Ensures employee satisfaction through:

- communication of business progress and all related action.

- setting goals and controlling achievements.

- establishing training and career development plans.

Ensures the appropriate safety practices among customer engineers. Develop CE skills. Spots and develops managerial/other specialist talent. Ensures employee satisfaction through:

Escalates system downs according to valid escalation procedure, to ensure earliest possible return to service. Reports in a timely and accurate manner as required.

Achieves guaranteed up time and other parameters as sold to customers.

Promotes quality improvement processes to:

- reduce cycle time

- drive continuous improvement of technical performance

- empower the work force

Functional Knowledge

• Demonstrates in-depth understanding of concepts, theories and principles in own job family and basic knowledge of other related job families

Business Expertise

• Applies understanding of the industry and how own area contributes to the achievement of objectives

Leadership

• Manages a generally homogeneous team; adapts plans and priorities to meet service and/or operational challenges

Problem Solving

• Identifies and resolves technical, operational and organizational problems

Impact

• Impacts the level of service and the team’s ability to meet quality, volume, and timeliness objectives
• Guided by policies and resource requirements within business unit, department or sub-function

Interpersonal Skills

• Guides, influences and persuades others internally in related areas or externally

Position requires understanding of Applied Materials global Standards of Business Conduct and compliance with these standards at all times. This includes demonstrating the highest level of ethical conduct reflecting Applied Materials' core values.

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Has developed proficiency in a range of processes or procedures through job-related training and considerable on-the-job experience. Completes a variety of atypical assignments, as needed. Works within defined processes and procedures or methodologies and may help determine the appropriate approach for new assignments. Completes work with a limited degree of supervision. Likely to act as an informal resource for colleagues with less experience.

Key Responsibilities

Assists in planning the daily work schedule within assigned territory to ensure completion of Preventive Maintenance and remedial maintenance.

Uses escalation policies as required to keep management informed of down situations.

Verifies and approves the operational quality of system equipment. Performs daily, weekly, monthly, quarterly, biannual, and annual periodic maintenance on systems within established time frames. Also performs wet cleans as required. Instructs customers in the operation and maintenance of systems. Troubleshoots and corrects process variations on systems partially with assistance from senior engineers.

Assumes responsibility for complete customer satisfaction within assigned accounts. Assists in planning, communicating, and co-ordinating support plans with customer management.

Performs start-up, warranty, paid service, and service contract activities. Performs TIER II start-ups within established time frames. Assists on TIER III start-ups. Provides technical assistance to less experienced Applied personnel. Uses training and experience to identify some process related system problems.

Serves as the Company liaison with the customer's front line management on administrative and technical matters for assigned projects. Assists in the preparation of and participates in customer meetings.

Develops and implements plans to increase productivity. Tracks equipment performance and plan uptime improvement. Has a working knowledge of Statistical Process Control. Utilises Quality Improvement Process methods and terminology.

Plans and executes support activities on a wide range of Applied Materials' systems. May need technical assistance in performance of daily responsibilities.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Qualifications

Education

• Associate's Degree
• 4 - 7 Years of Experience

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

1. Forecasts financial, manpower, and operational requirements for key businesses (start up, warranty, service agreements, paid service). Identifies and pursues service agreement business in conjunction with marketing and sales.
2. Manages start ups in terms of time and cost requirements. Manages local inventories and RMA procedure. Maintains DSO according to goal. Manages systems start up and warranty cost under reserve.
3. Ensures customer satisfaction with Company service and system performance.
4. Interviews, hires, and trains customer engineers as necessary to support regional business.
5. Ensures employee satisfaction through:- communication of business progress and all related action.- setting goals and controlling achievements.- establishing training and career development plans.Ensures the appropriate safety practices among customer engineers. Develop CE skills. Spots and develops managerial/other specialist talent. Ensures employee satisfaction through:
6. Escalates system downs according to valid escalation procedure, to ensure earliest possible return to service. Reports in a timely and accurate manner as required.
7. Achieves guaranteed up time and other parameters as sold to customers.
8. Promotes quality improvement processes to:- reduce cycle time- drive continuous improvement of technical performance- empower the work force

Functional Knowledge

• Demonstrates in-depth understanding of concepts, theories and principles in own job family and basic knowledge of other related job families

Business Expertise

• Applies understanding of the industry and how own area contributes to the achievement of objectives

Leadership

• Manages a generally homogeneous team; adapts plans and priorities to meet service and/or operational challenges

Problem Solving

• Identifies and resolves technical, operational and organizational problems

Impact

• Impacts the level of service and the team’s ability to meet quality, volume, and timeliness objectives
• Guided by policies and resource requirements within business unit, department or sub-function

Interpersonal Skills

• Guides, influences and persuades others internally in related areas or externally

Position requires understanding of Applied Materials global Standards of Business Conduct and compliance with these standards at all times. This includes demonstrating the highest level of ethical conduct reflecting Applied Materials' core values.

Key Responsibilities

Assists in planning the daily work schedule within assigned territory to ensure completion of Preventive Maintenance and remedial maintenance.

Uses escalation policies as required to keep management informed of down situations.

Verifies and approves the operational quality of system equipment. Performs daily, weekly, monthly, quarterly, biannual, and annual periodic maintenance on systems within established time frames. Also performs wet cleans as required. Instructs customers in the operation and maintenance of systems. Troubleshoots and corrects process variations on systems partially with assistance from senior engineers.

Assumes responsibility for complete customer satisfaction within assigned accounts. Assists in planning, communicating, and co-ordinating support plans with customer management.

Performs start-up, warranty, paid service, and service contract activities. Performs TIER II start-ups within established time frames. Assists on TIER III start-ups. Provides technical assistance to less experienced Applied personnel. Uses training and experience to identify some process related system problems.

Serves as the Company liaison with the customer's front line management on administrative and technical matters for assigned projects. Assists in the preparation of and participates in customer meetings.

Develops and implements plans to increase productivity. Tracks equipment performance and plan uptime improvement. Has a working knowledge of Statistical Process Control. Utilises Quality Improvement Process methods and terminology.

Plans and executes support activities on a wide range of Applied Materials' systems. May need technical assistance in performance of daily responsibilities.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Key Responsibilities

1. Will prepare project plan and coordinates the attainment of project deliverables from planning to implementation. Maintains matrix for process improvements
2. Will drive project deliverables and task details by through the use reports, tracking charts and, checklists.
3. Aligns the activities of resources internal to the business unit to achieve on-time and within budget performance objectives for the project.
4. Monitors, and reports to the business unit on project's cost performance.
5. Will participate on intra business unit design teams to complete projects. Will contribute to the team's technical development in the pursuit of the team's project goals.
6. Will research causes to project obstacles and assist in implementing solutions for resolution.

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Job Description

Key Responsibilities

• Owns product change management (PCM) and controlUnreleased product approval and control
  ECO (Engineering Change Order) approval
  Implementation of PCN (Part Change Notification), with Global Product Support
  Provides guidance/input to Engineering and the Business Unit about the field service impact of part/supplier changes.
  
• Accuracy of customer shipped configurations and BOMs (Bill of Materials)CaRM (Configuration accuracy Review Meeting) reviews
  BOM (Bill of Materials) accuracy
  
  NSR (Non Standard Request) approval
• Owns common modules roadmap and implementation post Phase 5 of ePLC.
• Implementation of component roadmaps including part obsolescence, replacements, alternative vendors and cost reduction
• Facilitates Intercompany communication to align on product strategies, provide guidance on pricing, spare level contents, and restricted part orders. Facilitates alignment meeting for product roadmap and market proliferation
• Implementation of cost reduction roadmap
• Manage strategic vendor issues
• Manage all changes to the product after product release
  whether driven by engineering, quality, safety, customer demands or supply obsolesce

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Job Description

Key Responsibilities

• Forecasts and communicates engineering, materials, and manufacturing requirements to suppliers. Provides input to outsourcing decisions by performing make versus buy analysis. Coordinates demand signals through MRP to minimize inventory exposure.
• Forms Materials Core Team and coordinates product development process deliverables through matrix management of buyers, planners, and production control. Collaborates with engineering team to interpret engineering requirements.
• Under some supervision, creates, releases and updates new project materials strategy.
• Sourcing: Assists in supplier price and delivery negotiations; under direct supervision may negotiate contracts as necessary. Utilizes the preferred supplier selection and assessment process when selecting suppliers. Completes supplier risk assessment on critical and unique parts. Monitors supplier performance (delivery, quality, cost).
• Materials: Coordinates activities around source selection, specification creation and price negotiation with appropriate team members.
• Executes commercialization (transition) materials plan).
• Manages materials change control process. Meets cost objectives and resolves quality issues. Generates and publishes Key Process Indicators . Tracks total landed costs targets.
• Works with engineering to identify preliminary critical parts, long-lead parts and inspection requirements. Assists in developing supplier and commodity road maps to engineering. Utilizes value analysis on build-to-print components in support of Should Cost analysis.
• Actively mediates and partners with quality and engineering teams to resolve supplier quality issues for assigned product groups. Escalate issues to Commodity Business Managers when necessary.

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Key Responsibilities

Performs standard Tier I procedures including wafer measurement.

Performs preventative maintenance and wet cleans independently. Assists senior engineers with corrective maintenance as needed.

Disassembles, cleans and rebuilds kits as part of kit management quality.

Learns and applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers.

Able to diagnose and resolve basic technical problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Has the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining a neat and orderly work area. Demonstrates a positive attitude in less than optimal customer situations.

Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

​

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Has developed proficiency in a range of processes or procedures through job-related training and considerable on-the-job experience. Completes a variety of atypical assignments, as needed. Works within defined processes and procedures or methodologies and may help determine the appropriate approach for new assignments. Completes work with a limited degree of supervision. Likely to act as an informal resource for colleagues with less experience.

Key Responsibilities

Assists in planning the daily work schedule within assigned territory to ensure completion of Preventive Maintenance and remedial maintenance.

Uses escalation policies as required to keep management informed of down situations.

Verifies and approves the operational quality of system equipment. Performs daily, weekly, monthly, quarterly, biannual, and annual periodic maintenance on systems within established time frames. Also performs wet cleans as required. Instructs customers in the operation and maintenance of systems. Troubleshoots and corrects process variations on systems partially with assistance from senior engineers.

Assumes responsibility for complete customer satisfaction within assigned accounts. Assists in planning, communicating, and co-ordinating support plans with customer management.

Performs start-up, warranty, paid service, and service contract activities. Performs TIER II start-ups within established time frames. Assists on TIER III start-ups. Provides technical assistance to less experienced Applied personnel. Uses training and experience to identify some process related system problems.

Serves as the Company liaison with the customer's front line management on administrative and technical matters for assigned projects. Assists in the preparation of and participates in customer meetings.

Develops and implements plans to increase productivity. Tracks equipment performance and plan uptime improvement. Has a working knowledge of Statistical Process Control. Utilises Quality Improvement Process methods and terminology.

Plans and executes support activities on a wide range of Applied Materials' systems. May need technical assistance in performance of daily responsibilities.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Qualifications

Education

• Associate's Degree
• 4 - 7 Years of Experience

Primary Responsibilities:

• Lead matrixed operational team of New Product Manufacturing Engineers, Material Project Managers, DFX Engineers, Manufacturing Engineers, Supplier Engineering, Procurement, and Manufacturing Program Managers to manage program deliverables from Manufacturing Operations.
• Engage Pilot Manufacturing to ensure early learning builds meet target milestones.
• Resolve business process operational issues between the Business Unit, Pilot Operations, and Volume Production.
• Align with Cross Functional Product Management Team to develop plan and execute product commercialization strategy.
• Engage Engineering team to analyze design and identify product improvements for enhanced volume manufacturability.
• Manage risk exposure to the division through analysis of production maturity.
• Interface with Business Operations of the BU on execution of operational strategy.
• Initiate and lead Operations strategies to improve business processes.
• Drive Product Life Cycle Operations deliverables for Business Unit New Product Introduction programs.
• Prepare and present high-level presentations on Program status and strategic overview to senior management.
• Assisting the top management in his/her reports, follow up with his directs for all the data and information required.
• Organizing meetings, preparing Agenda, MoM for meetings and following up on action items to closure.
• Planning and Defining Scope, Activity Planning/Sequencing and Resource Planning.
• Developing Schedules, Time, Cost Estimation, Budget, and Documentations
• Risk Analysis, Managing Risks and Issues, Monitoring and Reporting Progress regularly.
• Cross-project interdependency management to manage conflicting priorities and plan resources.
• Good understanding of the wider objectives of the program and defining the benefits that will realize the strategic objectives of the program.

Eligibility Criteria:

• Education Qualification: Bachelor’s degree in any Engineering discipline (preferably in Mech/Electrical) with M.B.A
• Experience: Minimum 6-8 years’ experience in project management, program management, data analysis.
• Exposure to Semiconductor Industry is a PLUS

Mandatory Skills:

• Effective communication skills both written and verbal to communicate to diverse functional groups and stakeholders on the program/project status.
• Ability to work positively in a team environment with wide range of individuals involved in program management under pressure and efficiently manage priorities to meet tight deadlines.
• Strong leadership and management skills with ability to lead functional teams or projects with moderate resource requirements, risk, and/or complexity.
• Strong interpersonal skills with ability to communicate difficult concepts and negotiate with others to adopt a different point of views.
• Strong analytical, problem-solving and synthesizing skills finding innovative ways to resolve problems with ability to lead others to solve complex problems.
• Ability to interpret internal/external business challenges and recommends best practices to improve products, processes or services. Demonstrates depth and/or breadth of expertise in own specialized discipline or field.
• Proficient & skilled in Microsoft PowerPoint to effectively communicate to program cross functional teams.
• Good knowledge and handling of project and program management methodology and techniques.
• Sound knowledge and understanding of Mfg. Operations in Product Life Cycle and Engineering Change Management.
• Proficient in Microsoft Project to develop project plans and schedules.
• Expertise in data gathering, analysis, and creative in reporting using Charts and analytical reporting with Microsoft Excel.
• Good knowledge of budgeting and resource allocation procedures for Financial planning and tracking.

Desirable Skills:

• Working knowledge of SAP
• Exposure with developing Excel Macros
• PMP / Scrum Certification
• Exposure to data analytics tools such as Minitab.

Applied Materials is an innovation-driven company. Our ability to identify emerging technologies that can complement and leverage Applied’s materials engineering expertise is critical to the company’s continued growth. To accelerate our growth programs, Applied Materials fosters a vibrant innovation network of academics, researchers, government organizations, commercial partners and entrepreneurs in the ecosystems we operate in.

Singapore is a key ecosystem for Applied Materials. At the South East Asia Regional Office, we identify new growth opportunities and build win-win partnerships within the ecosystem to realize this growth.

Key Responsibilities

This is a high visibility and high growth role, reporting into the Regional President’s Office. In this challenging and rewarding career opportunity, you will join cross functional teams and work with regional-global executive level stakeholders to:

• Translate global strategies to regional opportunities and align back regional opportunities with the BU business models to enable competitiveness
• Drive progress in key strategic regional initiatives and programs through tight coordination-collaboration with senior management, functions and BUs
• Improve operations by executing administrative cadence and optimizing decision making in regional level initiatives.
• Negotiate and execute ecosystem partnerships in Singapore to accelerate new business opportunities from inception to execution
• Build and maintain relationships with key public stakeholders to ensure Applied Materials is strategically positioned and supported

Skills & Competencies

• High learning agility – quickly understand the value drivers in numerous science and technology fields
• Integrated Enterprise Mindset – altruistic, strong sense of ownership and ability to work across different functions and BUs
• Strong analytical skills and effective problem solver – ability to navigate ambiguity and a highly matrix organization
• Strategic communicator and relationship manager – excellent communication skills, ability to message and influence stakeholders at all levels

Education and Experience

• Bachelor in any Engineering or Science related discipline with 7+ years of relevant experience
• Experiences in public-private partnership, strategic operations and project management
• Experienced in strategizing, structuring and negotiating internal-external partnerships with 3-5 year planning horizon
• Good knowledge of the high technology and/or semiconductor industry
• Experiences working across time zones in multi-functional global teams

Key Responsibilities

Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.

Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.

Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.

Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.

Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.

Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.

Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.

Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Other Requirements: This position may require standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools.

Additionally, because this position also may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Job Description

Responsibilities:

• Under the Test Engineering team, you will design, build and deploy test equipment with the objectives to ensure products meet design specifications
• Prepare project plan and coordinates the attainment of project deliverable from planning to implementation. Maintains matrix for process improvements
• Drive project deliverable and task details by through the use reports, tracking charts and, checklists
• Aligns the activities of resources internal to the business unit to achieve on-time and within budget performance objectives for the project
• Monitors, and reports to the business unit on project's cost performance
• Participate in intra business unit design teams to complete projects
• Contribute to the team's technical development in the pursuit of the team's project goals
• Research causes to project obstacles and assist in implementing solutions for resolution

Requirements:

• Bachelor in Engineering with minimum 6 years of relevant experiences
• Strong equipment and electrical background
• Proven project management experiences
• Proactive and resourceful personality
• Good communication and follow-up skills

Work Location:

• 8 Upper Changi Road North, Singapore 506906