Total 9 job vacancies by Binnies Singapore Pte. Ltd.

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Job Description:

• Assist Resident Engineer in daily close supervision and coordination duties
• Inspect and supervise Contractors’ works and tests to Approved Drawings and Specifications
• Participate in construction interface meeting for Instrumentation, Building Services (ELV) systems
• Checking BIM Model and interface with C&S team for the completeness of site clearance for Instrumentation construction activities
• Review of design deliverables for Instrumentation, Building Services (ELV) and release of IRF’s to contractor as per RE’s instructions
• Update of Daily Site Reports (DSR), maintain quality records of all works, monitor and report on work progress
• Responsible for the consistency of quality assurance inspections and testing for works
• Implement quality assurance plan in a well-coordinated manner
• Coordinate with Contractors on execution of works
• Participate in FAT activities and punch list follow up
• Participate in SAT, Commissioning of Instrumentation, Building services (ELV) activities till the final handover of the project

Job Requirements:

• Diploma in Instrumentation Engineering
• Registered as Resident Technical Officer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 5 years of relevant experience in quality assurance inspections on large infrastructure project or waste/water management projects in Singapore, particularly Instrumentation, Control, Automation and Building Services (ELV) systems

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Job Description:

• On behalf of the Owner’s Engineer (OE), the T&C Lead Engineer shall support the T&C Manager for overseeing all testing and commissioning activities of the IWMF Contractors, including the coordination of testing and commissioning activities of TWRP that interface with IWMF.
• The T&C Lead Engineer shall support the T&C Manager to lead the OE’s proposed testing and commissioning team and coordinate with its Resident Site Supervision (RSS) Team and OE’s design team as well as the Contractors to review the development of the Contractors testing and commissioning plan and the Contractors execution of their plan in order to achieve the Project milestones for each of the IWMF EPC Contracts (EPC Package 1 – Waste to Energy/Materials Recovery Facility and EPC Package 2 – Sludge Incineration Facility/Food Waste Treatment Facility).
• The T&C Lead Engineer shall support the T&C Manager to oversee the whole of each Contractors testing and commissioning activities, and the interfaces between EPC1 and EPC2 and TWRP as relevant, which should commence from dry/cold to hot commissioning to successful completion of entire commissioning process and trial run, including optimisation of plant operation with the Contractors and O&M teams.
• Participate as required by the T&C Manager in regular T&C Coordination Meetings with the Contractor and/or Other Contractors on adjacent sites (that is attended by Client representatives or similar others also)
• Any other matters that may from time to time be delegated by the T&C Manager.
• The OE’s T&C Lead Engineers are estimated to be mobilised to site at least 6 months prior to the commencement of actual testing and commissioning by the Contractor in order to familiarise themselves with the Works and the Contractors plans for the T&C and the expectations of the Client.

Job Requirements:

• The T&C Lead Engineers shall have at least 5 years of hands-on relevant experience in testing and commissioning (and operation) of large scale solid waste management projects (Waste to Energy - WTE, sludge incineration, materials recovery and food waste treatment), or experience with large scale industrial/process/utilities projects (i.e. waste, water, oil & gas, power) testing and commissioning.
• The T&C Lead Engineer to have a relevant engineering degree or certification.

The EICA Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 5 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas or power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the electrical team for project implementation at site.
• Proactive attitude and solution orientated personality with leadership mentality and for the EICA discipline, assisting project director for the contract execution.
• Strong capability and experience on 66kV, 10.5kV, 6.6kV and LV related power distribution equipment and cabling installation and commissioning requirement. Experience of large power transformers, generator circuit breakers, MV switchgear, protections and control equipment, MCC and UPS and DC system is expected.
• Having good understanding and interpretation of SLD, protection and metering SLD, schematics and cabling drawings.
• In depth of understanding for electrical power automation for electrification of WtE project.
• Contracts management in managing site works while maintaining swift communication with client and contractors for the WtE project
• Familiar with SS638 requirements on electrical installations in Singapore.
• Having multi-discipline coordination attitude in execution of electrical works
• Basic knowledge of instrumentation and control equipment for site works
• Review the submittals from Contractors for electrical installation and commissioning procedures of various sub-packages.
• Engage in site meetings with technical discussion contractor and client
• Joining site inspection for contractors works.
• Participation of FAT and SAT of electrical equipment
• Ability to use Navisworks to review 3D BIM Model for routing of site utilities

Job Requirements:

• Review of DCS / PLC system configuration, topology and controller, RIO engineering deliverables for the implementation of WTE automation systems
• Review the submittals from Contractors for Process Control like STG package, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, EMIS, PFMS, Communication Network Infrastructure etc.
• Essential understanding of P&ID of process engineering
• Engage in Technical discussion for all control system related issue with contractor and client
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation of FAT of automation equipment DCS, EMIS, PMS, PLC, Weighbridge systems etc
• Provide Technical support in Testing and Commissioning of WTE plant

Job Description

Pre and post contract administration and quantity surveying including the following: -

• Cost estimating and cost planning.
• Preparation of tender documents (including measurements and Bills of Quantities).
• Tender management including evaluation of tender submission.
• Assist Contracts Manager, Project Manager in Contract management and cost monitoring, management of interim/progress payment, including variation assessment and finalisation of account.
• Possess comprehensive knowledge of construction, logistics, material management and the ability to provide cost and financial advice.
• Relevant duties as and when assigned by reporting manager.

Requirements

• Preferably Diploma in Quantity Surveying/ Construction Management/ Building Services or higher qualification recognized by Singapore Institute of Surveyors and Valuers (SISV).
• Minimum 10 years of relevant working experience in supporting Project Managers/Contract Managers in the delivery of projects in engineering and construction industry.
• Meticulous, independent, highly motivated, results-oriented and good team player.
• Able to manage stakeholders (Contractors, Client and Consultants).
• Good written and oral communication skills.
• Able to meet tight deadlines.
• Experienced in Public Sector Standard Conditions of Contract (PSSCOC) preferred.

The EICA Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 10 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas, power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the EICA project implementation at site.
• Proactive attitude and solution orientated personality with leadership mentality and for the EICA discipline, assisting project director for the contract execution.
• Strong capability of specification capability for all I&C related specification. e.g. DCS / PLC system configuration, topology and controller, RIO engineering.
• In depth of understanding for automation package for contract implementation of automation systems for WtE project.
• Contracts management in the I & C discipline for the WtE project
• Review the submittals from Contractors for Process Control like Waste Reception system, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, Communication Network Infrastructure, DCS, PLC etc.
• Essential understanding of P&ID of process engineering
• Engage in Technical discussion for all control system related issue with contractor and client
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation of FAT of automation equipment, DCS, PMS, PLC and RIO
• Provide Technical support in Testing and Commissioning of the plant

Job Requirements:

• A relevant Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).
• At least 10 years of relevant experience in design and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will be considered as relevant.

Job Descriptions:

• On behalf of the Owner’s Engineer (OE), the T&C Manager shall be responsible for overseeing all testing and commissioning activities of the IWMF Contractors, including the coordination of testing and commissioning activities of TWRP that interface with IWMF.
• The T&C Manager shall lead the OE’s proposed testing and commissioning team and coordinate with its Resident Site Supervision (RSS) Team and OE’s design team as well as the Contractors to review the development of the Contractors testing and commissioning plan and the Contractors execution of their plan in order to achieve the Project milestones for each of the IWMF EPC Contracts (EPC Package 1 – Waste to Energy/Materials Recovery Facility and EPC Package 2 – Sludge Incineration Facility/Food Waste Treatment Facility).
• The T&C Manager shall oversee the whole of each Contractors testing and commissioning activities, and the interfaces between EPC1 and EPC2 and TWRP as relevant, which should commence from dry/cold to hot commissioning to successful completion of entire commissioning process and trial run, including optimisation of plant operation with the Contractors and O&M teams.
• Direct liaison with Client’s Technical Directors/PGMs.
• Attendance at Client Monthly Project Steering/Working Committee Meetings chaired by DCEO and any other relevant high-level meetings as required by the Client/PD/SO.
• Chairing regular T&C Coordination Meetings with the Contractor and/or Other Contractors on adjacent sites (that is attended by Client representatives or similar others also)
• Any other matters that may from time to time be delegated by the PD/SO.
• Member of internal Senior Project Management Team (PMT) that meets regularly (chaired by PD/SO) to discuss progress and resolve any internal issues.
• The OE’s T&C Manager is estimated to be mobilised to site at least 6 months prior to the commencement of actual testing and commissioning by the Contractor in order to familiarise themselves with the Works and the Contractors plans for the T&C and the expectations of the Client.

Job Requirements:

• The T&C Manager shall have at least 15 years of hands-on relevant experience in testing and commissioning (and operation) of large scale solid waste management projects (Waste to Energy - WTE, sludge incineration, materials recovery and food waste treatment), or experience with large scale industrial/process/utilities projects (i.e. waste, water, oil & gas, power) testing and commissioning.
• The T&C Manager shall have a relevant engineering degree or certification.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B