Our Client is committed to being the highest quality and reliability provider of laser-based manufacturing systems for leading electronics and device manufacturers world-wide; helping them to optimize production of the materials, components and systems that are an integral part of the electronic devices in use today.

As part of the mission, we are seeking an experienced Quality Assurance Engineer to work in our Singapore Laser Manufacturing facility in Kaki-Bukit, Singapore who can drive improvements in the quality and reliability of fiber based and solid-state laser products and production processes. This role will have responsibility for developing, maintaining, and improving the Quality control systems and processes for a variety of critical laser systems as well as leading by influence to drive quality within the culture of the organization.

A successful candidate will have a strong work ethic to meet the occasional high intensity workload for customer commitments. A persuasive personality with strong communications skills is needed to influence key cross-functional stakeholders.

Key responsibilities:

• Quality engineering support for manufacturing and project management
• Develop inspection requirements; facilitate PFMEAs; resolve discrepant material issues and create and maintain quality documents such as control plans and inspection plans
• Act as the quality interface for the laser production team in responding to customer complaints using failure analysis, development of corrective and preventative actions and trend analysis
• Conduct audits, including closing out audit findings, create audit finding reports and determine proper corrective and preventative actions
• Coach and mentor Quality Engineers.
• Support validation activity of processes, equipment, and metrology
• Support and comply with the company Quality System, ISO, and requirements
• Establish and maintain quality control processes and procedures for optomechanical components and systems.
• Develop and maintain quality documentation including inspection plan, test protocols, quality control procedures and reports.
• Collaborate with suppliers to ensure their compliance with quality requirements and drive continuous improvements.
• Actively participate in Continuous Improvement Initiatives such as Lean Manufacturing or Six Sigma projects to enhance Quality, efficiency and cost-effectiveness.

Requirements:

• Bachelor’s/Masters Degree in Mechanical, Optical, Optomechanical Engineering or related Engineering Science
• 6 years of experience in engineering in a machining or manufacturing setting
• With good experience in optic testing, optic inspection and experience liaising with optic suppliers and manufaturers.
• Experience in Optomechanical design including knowledge of optical principles, components, and optical system integration.
• Solid understanding of Mechanical Engineering Principles including Structural analysis, Material selection, Tolerance analysis and Manufacturing Process.
• Knowledge in integrating optical components including alignment, fixture design and calibration procedures.
• Knowledge of quality systems, regulatory requirements, and industry standards
• Advanced knowledge of blueprint reading and GD&T
• Ability to operate a variety of inspection equipments
• Statistical expertise with DOE and Capability Studies
• Design software- CAD (e.g., SolidWorks, AutoCAD), Minitab, Python, Jump etc
• Strong and thorough knowledge of quality engineering discipline, including:
  • Quality data collection and data analysis
  • Understanding of statistical methods, including population sampling, hypothesis testing
  • Problem Solving techniques such as 8-D, 5-why, Fishbone / Fault tree, PFMEA, K-T

Preferred Qualifications / Competencies:

• Previous Laser or Optics industry experience is highly desired.
• Familiarity with statistical analysis techniques, such as Weibull Analysis and Gage R&R, as well as appropriate software tools, such as Minitab or JMP
• Familiarity with the following areas: Process Validations (IQ, QQ, PQ), Failure Mode and Effect Analysis (FMEA), Structured Problem Solving (8D) and/or Root Cause Analysis - Corrective and Preventive Actions (RCA-CAPA)
• Previous experience with Risk Management, Engineering Change Control, Handling of Deviations and Non-conformances & Lean Six Sigma
• Experience working with cross functional teams (Engineering, Operations, Sales)
• Ability to complete tasks in a timely manner, with excellent attention to detail and accuracy.
• Project Management Experience
• Self-motivated, ability to identify potential problems or improvements and possess the initiative to take appropriate actions as necessary.

Who we are

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

About Beca

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are a growing engineering consulting company based in Singapore, seeking for a high performing professional to join us as an Executive Engineer – Mechanical (Building Services).

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Under the supervision of Senior Engineers, to perform initial engineering task on the mechanical services detailed design for building projects
• To prepare submission to authorities for approval of design
• To attend to project meeting with Client, PM and Consultants from other disciplines
• To attend site project meeting and site inspection and respond to technical queries
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• Handle client liaison and reporting
• Liaise with authorities on plans submission and compliance

Key Requirements

• Degree in a Mechanical Engineering recognised by Professional Engineers Board, Singapore will be an advantage
• Minimum 3 years’ experience in the design & supervision of building service projects (Those with 5 years’ experience and/or Certified Professional Engineers will be considered for a senior position).
• Experience in leading roles for design & design management of residential, commercial, institutional or hotel projects will be an advantage
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style
• Experience in a consulting environment

Job Highlights

• Career Advancement
• Medical Allowance
• AWS & Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Responsibilities

• Involves in all aspects relating to the Design and Construction Management of all types of Civil and Structural System.
• To lead the Engineer team, carry out civil and structural engineering jobs in front end engineering design, detail engineering design.
• To generate project specification, design philosophy, calculation template to comply with clients’ requirement and local authority’s requirements.
• To Provide logistical support (site utilisation) when needed, as requested by sub-contractors.
• To be the liaison for the coordination of different trades within the same discipline.
• Responsible for all on-site engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients queries to ensure timely work arrangements.
• Involve in day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and local authorities’ quality standard.
• Manage project documentation and maintain accurate records.
• Ensure compliance with all health and safety regulations.

Qualifications

• Bachelor Degree in Civil Engineering/Building Construction or any equivalent qualification.
• Site experience on Super structure works for reinforce concrete, Steel structures and Precast structures
• Experience/Knowledge in Bridge Construction/ Crosshead/ Lifting Frame /Launching Gantry Operation/ Pre-cast Segment Method/ MRT/ LTA is an advantage.
• Minimum 5 years of relevant working experience in local construction industry would be advantageous.
• Good team player and able to work independently
• BCSS Certificate
• Familiar with the Local authorities’ requirements for civil and structural submissions
• Possess strong leadership qualities and analytical and reasoning abilities.
• Ability to read, analyses, and interprets common technical information, contracts reports and instructions.

Location: Teban Gardens West Region

Sales Executive (Supplier of Construction equipment and material)

Salary: Basic $2500 + Car Allowance $800 + Mobile Allowance $80 + Commission

Office location: Jurong East

Working Days: Monday to Friday

Working Hours: 8:30am - 5:30pm

Responsibilities

• Manage, maintain and build rapport with clients
• Develop new accounts and grow customer base
• Diligently follow up on customers requirements
• Prepare and submit quotations
• Prepare and meet monthly sales target and collections

Requirements

• Several years’ experience preferably in sales of construction equipment and materials
• Clean driving license and own transport

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Engineer/Senior Engineer, Fire protection

Duties & responsibilities:

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples
• To liaise and work with relevant authorities, sub-contractors or clients on shop drawings, materials and samples
• Review and align Fire protecton design drawings to ensure compliance with design specifications and guidelines (Sprinkler System, Fire Alarm System, Hosereel System, Wet/Dry riser system, Fire Hydrant System, Fire man intercom system)
• Knowledge in M&E and able to Identify discrepancies between M&E, structural, ID, architectural and client provisions
• Manage and execute project as per the schedule
• To attend meeting with contractors to address issues and update progress
• Study and reviewing of drawings, specifications for compliance
• Allocate work to supervisors and ensure jobs are correctly and properly achieved within standards and SOP.
• Plan and lead testing and commissioning of the fire protection systems.
• Follow up with site / authority inspections, defects rectifications of the fire protection works.
• Plan and prepare OMM, training, As-Builts drawings for handing over of completed fire protection systems to client.
• Follow up with maintenance of fire protection systems during DLP.

Education / Experience / Special Skills:

• Degree in Mechanical Engineering/Building Services OR Diploma in Mechanical Engineering/ Building Services
• 5 years of relevant experience
• Proficient in MS office
• Good communication and written skills
• Experience in Water Mist system and/or foam system is added advantage
• Able to work independently and possess good interpersonal skill

Job Responsibilities :

- To develop and maintain business strategies by achieving sales target and increased market shares.

- Visits customer to drive sales pitch and product presentations

- Responsible for achieving sales revenue and profit target

- Align and link business strategies set by company

- Build strong relationship with existing and new customers

- Provide sales and after-sales support, in coordination with our internal departments and customers

- Prepare sales quotations for customer.

- Follow up with after sales issues.

- Market studies and feedback to sales manager

- Monitors sales quotation status and forecast.

- Performs order screening and preparation for clean order processing

- Ensures proper documentation of all sales quotations in line with the ISO standards and processes.

- Participate in any ad-hoc projects as assigned by management and or sales manager from time to time

Job Requirements :

- Diploma / Degree in Engineering

- 3 years of relevant experience

- Experience in Process Instrumentation / Automation Industry

- Experience with MRO Sales an added advantage

- Independent and Team player

- Excellent communication and interpersonal skills

Familiar with CRM and ERPLN

Senior Design Engineer
5 days
9am-6pm
Kallang
Up to $7000

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :
  1) Design of automation or semiconductor equipment
  2) High precision machine design
  3) Design of High Speed Pick and Place mechanisms
• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

As a Senior DDQA (Development and Design Quality Assurance) CMOS Reliability Engineer, you will be primarily responsible for developing and optimizing quality and reliability criteria related to CMOS process for the next generation of Micron's memory parts. You will be partnering with Technology Development (TD) on latest products and technologies related to CMOS Front end/interconnect module and define quality and reliability fail modes especially NUDD (New, Unique, Different, Difficult) with goal to mitigate risk and achieve product qualification milestone successfully. You will also be required to identify, diagnose, and resolve CMOS related problems by applying failure analysis, FMEA or 8D methodology. In this position, you will be working in a highly collaborative atmosphere, interacting with various groups such as Technology Development (TD), Process Integration, electrical and physical failure analysis, Product Engineering, Quality Reliability Assurance Team to develop product that meets Quality and Reliability specs and requirements.

Responsibilities include, but not limited to:

• Drive new CMOS devices or modules for the future technology of NAND from Product Quality and Reliability perspective.
• Define & implement Reliability test methodology for validating the risk of new CMOS module for the next generation of Micron's memory parts.
• Provide insights and guidance to the Global Quality (GQ) management team on topics involving CMOS.
• Interact and collaborate with Design Team, TCAD, modeling, and layout teams to drive clearer definition of CMOS device and reliability improvements across multiple tech-nodes and designs.
• Develop/re-define inline and electrical critical specifications criteria for optimum product performance and drive activities to get them to manufacturing process capability.
• Characterize and validate new CMOS device, models, and test structures for developing future NAND products.
• Develop, establish new CMOS Param or optimize scribe design for CMOS parameters.
• Collaborate with various stakeholders and provide DDQA independent assessment on Quality & Reliability items in various technology development milestones (EPP, SVC, MSC, VME), escalate issues and collaborate for timely risk mitigation and resources, also provide inputs for Leaderships in making decision on passing the Qual milestone (Low Tier Qual/High Tier Qual/Auto Qual etc).
• Support technology transfer to production facilities (some international travel may be required).
• Partner with multiple stakeholders in Process Conversion Review Board Meeting (PCRB) to improve coverage from various aspects of product quality and reliability and prevent post qual escapes or excursion triggered by conversion.
• Identify gaps and drive initiatives/programs/business process to build margin around structural, electrical, and reliability performance.
• Build Product Fail Modes Repository based on NUDD (proactive) and previous issues (reactive), and work with key stakeholder to prevent issues or implement effective detections controls and containment.
• Deliver a new Product Fail Modes Repository and their Effective Detection Controls and Containment Document to meet technology development and Transfer timeline.
• Partner with Manufacturing (MFG) or Central Quality teams on current high-volume products to sustain and further develop the Product Fail Modes Repository through regular refresh meeting.

Minimum Qualifications:

• 4+ years’ experience in semiconductor related engineering.
• Hands-on experience on advanced CMOS engineering and device reliability, integration or characterization, specialized in Microelectronics and Semiconductor Device Physics is a requirement.
• Direct fab experience with nonvolatile memories manufacturing, knowledge of TCAD, K2 view layout, and NAND product are highly desirable.
• Understanding of Reliability items for CMOS and Array
• Understanding of electrical specifications, Probe and Param registers
• Knowledge of 3D NAND Fab processes, flow and common reliability and yield fail modes is preferred.
• Highly skilled at problem-solving activity and capability of leading cross functional team.
• Understanding on technical risk assessment, FMEA, and 8D methodology for root cause analysis and problem solving.
• Effective verbal and written communication skills in English.
• Good multitasking skills and ability to set priorities in a fast moving, dynamic environment.
• Ability to work independently, with minimal direction, and a focus on meeting commitments.
• Real passion for improving product quality to increase customer satisfaction.

Education and Experience:

• Bachelor’s degree or higher in electrical or electronics engineering, physics, chemistry, mechanical engineering, material science, or other applied engineering discipline.

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

We are looking for a Plant & Machinery (Mechanical / Electrical) Engineer for:

Metal shredder & non – ferrous separation / Vezanni Shear

Waste Wood To Energy Plant

Responsibilities:

• Responsible for ensuring highest possible uptime and availability for mechanical equipment in the scrap processing plant.
• Responsible for reliability is highest possible and where needed facilities / perform root cause investigations to increase reliability and general performance of equipment.
• Ensure incident free and reliable operation, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with International Best Practice on mechanical equipment.
• Ensure future maintenance activities are proactively planned, prepared and scheduled with the required level of equipment integrity and reliability.
• Ensure liaison with production team and other stakeholders to stay updated on the on-going maintenance activities.
• Ensure equipment documentation and Preventive Maintenance (PM) procedure are constantly updated.
• Ensure technical, environmental and safety aspects in all matters is assessed in compliance with Health and Safety regulations.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Master's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): Mandarin, English (in order to liaise with the Mandarin speaking associates)
• At least 5 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC system, Conveyor belts
• Preferably Senior Executive specialized in Engineering - Mechanical/Automotive or equivalent.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

About

This is a full-time on-site role for an Administrative Assistant at Len Meng Engineering & Construction Pte Ltd in Tuas.

Responsibilities

• Process, sort and distribute incoming mails internally in a timely manner
• Answering daily phone calls
• Sales Process eg: Quotation, Purchase Order, Delivery Order, Invoices
• Organizing and maintaining files
• Data Entry and Ad-hoc administration duties as required.

Requirements

• Min “N” Level with at least 2-3 years of relevant work experience in similar roles;
• Abilities organizational and time-management;
• Proficiency in MS Office;
• Phone Etiquette and Communication skills;
• Ability to multi-task and prioritize tasks

Benefits

• Company Transport provided from designated MRT Station

Job Description:

• Full Spectrum HR Work duties and administrative support role and advisor to manager in charge
• Work with line managers on manpower requirements, employee relations issues, compensation and benefits matter, HR initiatives, and other HR matters;
• Administration of workmen compensation, MOM reporting, insurance claim, etc;
• Ensure that HR policies and practices are in compliance with prevailing statutory regulations;
• Identify training and development needs of employees and propose training programs;
• Work pass applications, renewals and cancellation;
• Ensure timely update of employees’ database, proper filing system and smooth office administration;
• Process payroll on a timely basis such as computation of monthly salaries and deductions;
• Other ad-hoc duties as assigned

Requirements:

• Diploma or Degree holder in Human Resources Management or HR related is preferred;
• Preferably 3 years in relevant HR administration role; HR policy planning; HR full spectrum
• Well versed with Singapore Employment Act and labor legislation;
• Strong interpersonal skills to work with key decision makers and various levels of employees;
• Working experience with InfoTech or any HRMS systems;
• Knowledge of payroll, CPF, IRAS, government related latest updates
• Organized and able to take stress
• Prior Construction Background will be preferred

Suitable candidates are encouraged to apply this position via Apply Now button or email to [email protected]

Only shortlisted candidates will be notified.

Responsibilities:

• Handle full spectrum of accounting functions
• Process and ensure all invoices are accurately record in the accounting System
• Prepare and review intercompany transactions and balances
• Perform bank reconciliation
• Assist in preparation and submission of GST returns
• Coordinate with auditors, tax agents and other professionals for audit, compliance and taxation
• Provide administrative support to the accounting department, assist with filing, data entry, invoice processing, and maintaining records.

Requirements:

• Diploma/Degree in Accounting/Finance
• Minimum 3 years in local construction firm with audit experience
• Meticulous with strong organization and communication skills
• Ability to work under pressure with positive attitude and cope with tight deadlines
• Fast learner with strong sense of initiative, driven and a good team player

Suitable candidates are encouraged to apply via Apply Now button or email your resume to [email protected]

Only shortlisted applicants will be notified.

Senior/Mechanical Design Engineer

Working day: Monday - Friday
Working Hour: 830am - 6:15pm
Salary range: $4,000 - $6,000 (depend on experience)
Location: Woodlands Ave 9

Responsibilities:

As a Senior Mechanical Design Engineer, you'll play a crucial role in our team, leading the design and development of our products from concept to production. Your focus will be on driving innovation, ensuring our products meet the highest standards of quality, performance, and reliability. You will collaborate closely with cross-functional teams, playing a key role within the team.

Job Responsibilities:

• Analyze project requirements and develop innovative solutions to meet customer needs.
• Design high precision and high-tech automation equipment, ensuring that it meets performance, quality, and reliability standards.
• Select components such as servo axes and robots based on project requirements.
• Coordinate with fabrication houses and component suppliers to ensure timely delivery of parts and components.
• Guide assembly technicians in building and testing the equipment, ensuring that it meets design specifications and performance requirements.
• Conduct design reviews and provide feedback to ensure continuous improvement of our products.
• Stay up to date with the latest developments in mechanical engineering and automation technology.
• Other duties as assigned.

Job Requirement

• Bachelor’s degree / Diploma in Mechanical Engineering / Mechatronics or related field preferred.
• Min 6 years of relevant experience in automation equipment design.
• Knowledge and experience in factory automation is an advantage.
• Experience in electrical, pneumatic, and sensor component selections.
• Proficient in SolidWorks 3D software.
• Strong understanding of mechanical engineering principles, materials, and manufacturing processes

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Job Descriptions:

• Overseeing and directing construction projects from conception to completion
• In-depth reviewing of projects to schedule deliverables and cost estimation
• Ensure safety procedures are implemented and meet company’s standard and legislation
• Ensure safety and health are in place according to building and safety regulations
• Monitor, control, and coordinate site works
• Ensure projects meet customer’s quality standards
• Any d-hoc duties as require

Requirements:

• Degree in Civil Engineering or equivalent with at least 5 years relevant experiences at or equivalent managerial level in construction
• Knowledge in Design and Auto Cad (3D) for Civil Structure work.
• Good communication skills
• Able to communicate in English and Japanese language (to handle queries and feedback from Japanese speaking associates/ clients)

JOB DESCRIPTION

• To manage team of Engineers and provide them technical guidance.
• To perform engineering analysis and prepare calculations complying with Project Design Criteria, codes of practises and company standards.
• To supervise drafters in the production of engineering drawings in order to develop practical and economic designs.
• To participate in the preparation of all project design deliverables including layout drawings, detail drawings, schedules, specifications, data sheets, calculations requisitions, and technical tender evaluations, in accordance with the project requirements and the company procedures and standards.
• To ensure technical integrity of design deliverables.
• To ensure that all document checking and design verification tasks have been completed in accordance with the company and project procedures before formal document issue.
• To ensure conformance with customer requirement.
• To liaise with other consultants and to co-ordinate the discipline activities with the others to achieve the overall project design objectives in the most efficient manner.
• Attend meetings as and when required and prepare minutes of meeting.
• Resolve technical problems at site by liaising with PE directly.
• Prepare tender specifications and assist team to select competent vendor
• Manage site supervisors (RE/RTO)
• Support supervisors in the day-to-day execution of projects
• Undertake learning and development on a consistent and regular basis.

QUALIFICATIONS

• Graduate or post graduate degree in Civil & Structural Engineering from a reputed university. Degree recognised by PE Board will be an advantage.
• The applicant with Professional Engineer (PE) registered is added advantage for this application
• 5 to 8 years of experience with proven track record of successful delivery in infrastructural, building or industrial projects preferably in Singapore
• Conversant with Eurocode design.
• Knowledge of BIM modelling will be an advantage.
• Good interpersonal and communication skills.
• Good written and communication skills.
• Capable of working in multi-cultural environment.

Location: Ang Mo Kio

Job Responsibilities

• Drive the design and architecture of satellite ground control and antenna management software systems.
• Lead software team in implementing design, testing, verification, and validation of all software components.
• Implement cybersecurity measures for software applications
• Generate and maintain software development documentation.
• Planand provide software maintenance, training, and consultancy to users.
• Develop new skills & explore new technologies for improvements.

Job Requirements

• 8 years of experience in software development.
• Experience in mission critical system software development would be advantageous
• Proficient in developing full stack applications, preferably with C#, Javascript.
• Experience with database, API design, network architecture, message broker, and cloud technologies.
• Experience with core engineering infrastructure tools such as GIT servers, CI/CD pipelines, Container Technologies.

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

• Report to the Head of Department at basis level and to the Lead Electrical Engineer at project level.
• Implement Company work processes, procedures and quality policies as required by project.
• Review Company contractual requirements, scope boundaries and support the Lead Engineer with the Management of change on assigned areas.
• Manage interfaces with equipment and package suppliers to comply with technical requirements, specifications and Client’s Basis of Design, Standards & Project Specifications.
• Ensure that that all risks related to his/her area or responsibility are identified, assessed and preventive measures are implemented in a timely manner when required.
• Support the Lead Engineer on verification activities as required by the verification body / classification society or other applicable approving authorities.
• Represent the Electrical Engineering discipline during meetings, audits, verifications, workshops and technical reviews and be responsible for an effective and timely resolution of identified issues.
• Provide technical support related to Electrical activities at the fabrication site, whenever required.
• Ensure the technical integrity of all Electrical Engineering activities and deliverables for work performed through project lifecycle phases and for compliance to project specific performance, integrity, quality and HSE requirements.
• Continuously seek to improve working methods, tools and procedures and contribute actively to the Electrical Engineering Discipline development and experience transfer.
• Perform any other duties as assigned by supervisor.

Work experience requirements:

• Must have a minimum 8 years of work experience in medium/large sized brownfield and/or greenfield projects in the Upstream Oil and Gas sector and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Experience in electrical power system design and handling of power system studies.

Qualifications:

• Bachelor’s degree in Electrical Engineering.

Other skills:

• A good understanding and knowledge of oil and natural gas industry standards including but not limited to IEC, NORSOK, DNV and other relevant standards related to Electrical Design and Engineering.
• Effective technical communication (verbal and written) skills with proven ability to present technical issues to design teams, client, technical authorities and verification bodies.
• Effective interpersonal skills and ability to work well with people at all levels.
• A self-starter who can work independently, make sound decisions, analyses problems and provide focused solutions.
• Prepared electrical philosophies and specifications for electrical systems for concept, FEED and detail engineering projects as necessary.
• Dimensioning and calculation of electrical networks (High and Low voltage).
• Prepare Technical Requisitions for electrical packages like High and Low voltage switchgear, Transformers, Bulk materials etc.
• Input and Follow up of vendor documentation.
• Participate during Factory Acceptance Test (FAT)/Site Acceptance Test (SAT).
• Perform electrical calculations like cable sizing, lighting and heat tracing using relevant software’s.
• Client liaison regarding technical clarifications and queries.
• Co-ordinate electrical design within own discipline and on a multidiscipline level.
• Administration of tags in EIS (set up, define control objects, link to activity, data input etc.).
• Cable administration in relevant database like cabsys, AVEVA.
• Familiarity with Equinor systems (STID, STID TAG, procosys, Stidele, cable routing, SAP) will be a distinct advantage.
• Produce new and revise existing documentation and drawings in accordance with project document schedule.
• Assist in preparation of bulk material MTO.

We regret that only shortlisted candidates will be notified.

Job Description

• Be an architect for dormakaba Plant Singapore’s digital transformation in IoT based data acquisition, data analytics and data storage with visualization on current platform setup.
• Introduce new and upcoming technology trends in IoT, machine learning and use of sensors for impacting current business practices and select solutions through research partners and strategic suppliers.
• Work with stakeholders and see through the successful applications and implementation of IoT systems
• Provide guidelines on technology transfer to production floors in Plant Singapore.
• Act as a catalyst for awareness and knowledge transfer and promote the use of IoT practices in the plants.
• Take the lead in horizontal deployment of similar practices to Plants Malacca & Suzhou as well as to offices.
• Increase knowledge and awareness of IoT systems
• Lead in IoT pilot projects in Plant Malacca

Job Requirements

• Good experience in Industrial IoT use in business processes.
• Hands on experience with data acquisition, database selection, data analytics and setup.
• Good understanding of machine learning, data analytics and visualization.
• Excellent interpersonal skills.
• Degree in Computer Engineering, Computer Science or Engineering

Temus was established by Temasek in partnership with UST, to provide digital transformation solutions for the private and public sectors as we aspire to be a strategic partner in realising the Singapore Government’s Smart Nation vision. We are headquartered in Singapore and have more than 400 employees across a wide range of disciplines in strategy, design, architecture, technology, data & AI.

Job Overview:

We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic technology team. In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes.

Key Responsibilities:

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

Job Qualifications:

• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.
• Strong analytical and problem-solving abilities.
• Excellent communication skills, both verbal and written.
• Ability to work collaboratively in a fast-paced, agile environment.
• Leadership qualities with the ability to mentor and guide team members.

(By applying for this role, you have read and acknowledge the data privacy statement via this link - https://www.temus.com/job-applicant-data-protection/)