Total 10,217 construction engineer job vacancies in Singapore

- Willing to work under the sun and overtime, weekend or holiday, shift switching and able to work under pressure and condition such as not afraid of dirty, not afraid of tired.

- Willing to work as a Construction worker, can do the timber, rebar job, able to work at project site, structural work.

- Able to operate of machine, can use construction machine, knowledge of construction safety. Experience in operating equipment like trench rammers, drills, pneumatic hammers. Knowledge of mixing and pouring construction material (concrete, sand, grout & etc...).

- At least 10 years of experience in construction industry. Manage site activities, vendors and sub-contractors，assist the Project Manager in the daily execution of work. Attend meeting, coordination, prepare works schedule & site supervision.

- Ensure installation is carried out as per construction drawings & ensure that works are executed within an acceptable standard of workmanship.

- Responsible for all aspects of site safety, proven experience as construction worker, reduce material wasting and cost saving.

- Knowledge of basic engineering and construction principles and methods, be bilingual, fluent in English & Chinese / Bangladesh.

- Any other assigned duties.

• Follow blueprints and building plans to meet the needs of clients

• Install structures and fixtures, such as windows and molding

• Measure, cut, and shape wood, plastic, and other materials

• Construct building frameworks, including walls, floors, and doorframes

• Good at fabrication kitchen cabinet

• fully operate the production

• Able to work in a team

• Hardworking and willing to accept new ideas

• Skillful

• Knowledgeable

• Dedicated to job

• Positive mind set

• Working attitude

• Productivity

• Able to work with long hours and public holiday

Carpenter Job Requirements and Responsibilities:

• Installs foundations, walls, floors, ceilings, and roofs using materials such as: wood, steel, metal, concrete, plastics, and composites of multiple materials.
• Fits and installs window frames, doors, door frames, door hardware, interior and exterior trim using a carpenter’s level, plumb bob, and laser levels.
• Erects scaffolding and ladders for assembling structures above ground levels.
• Studies specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required.
• Shapes or cuts materials to specified measurements, using hand tools, machines, or power saws.
• Follows established safety rules and regulations and maintaining a safe and clean environment.
• Builds or repairs cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, hand tools, or power tools.
• Assembles and fastens materials to make frameworks or props, using hand tools and wood screws, nails, dowel pins, or glue.
• Removes damaged or defective parts or sections of structures and repair or replace, using hand tools.
• Inspects ceiling or floor tile, wall coverings, siding, glass, or woodwork to detect broken or damaged structures.
• Moves necessary materials around jobsite as assigned.
• Cleans up worksite debris.

Carpenter Qualifications / Skills:

• Capable of receiving and following instructions and communicating with co-workers
• Able to read and adhere to labels, safety warnings, and guidelines
• Attentive to detail and always alert to ensure safety

Education, Experience, and Licensing Requirements:

• High school / diploma is an asset
• 4 years of experience in commercial or residential carpentry
• Ability to comprehend schematic diagrams, blueprints, sketches, building plans and other specifications
• Strong working knowledge of job site safety as well as ability to complete a company specific safety orientation

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

At TikTok, our people are humble, intelligent, compassionate and creative. We create to inspire - for you, for us, and for more than 1 billion users on our platform. We lead with curiosity and aim for the highest, never shying away from taking calculated risks and embracing ambiguity as it comes. Here, the opportunities are limitless for those who dare to pursue bold ideas that exist just beyond the boundary of possibility. Join us and make impact happen with a career at TikTok.

Our team is responsible for providing TikTok search users with first-class search experience by building a strong and robust infrastructure and platform to support product fast iteration and key feature development. In our team, you'll have the opportunity to take part in developing the key features on TikTok Search, understand how TikTok Search could be evolved to be a multi-billion-user product and first-handed experience how user request varies on this giant from time to time. We encourage a culture of self-driven, intellectual curiosity, openness and problem-solving.

Detailed responsibilities include but not limited to:

1. Product Development: Support fast iterations of TikTok Search business and further enable the product growth.

2. Performance & Stability: Build a fast and robust Search product by keeping optimizing system performance and improving service stability.

3. Search Engineering Infrastructure: Guarantee reasonable Search architecture governance to ensure that the overall system operates smoothly.

4. Search offline processing: Construct a high freshness multi-media index and provide a reliable offline data support for Search Engine.

5. Backend engineering team building, management and development.

Qualifications

Job Requirements

- BS degree in Computer Science, Computer Engineering, or other relevant majors.

- Excellent problem-analysis and -solving skills, have industry experience in building backend services for large-scale consumer-facing applications.

- Good at coding, data structure and basic algorithm

- Good team communication and collaboration skills.

Preferred Qualifications

- Good understanding on how modern Search system is built or/and how modern Search product should be evolved.

- Industry experience in building a consumer-facing Search product.

- Experience in building a medium-size backend technical team from scratch.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Job Description

• Industry/ Organization Type: Security System Service Provider
• Position Title: Project Engineer (IT)
• Working Location: East (Nearest MRT: Tai Seng)
• Working Hours: 5 days (Monday-Friday, 9 am to 6 pm)
• Salary Package: Up to SGD 3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Set up equipment for various systems and conduct testing and commissioning.
• Install electronic systems, including cabling and storage devices.
• Perform troubleshooting, repairs, and preventative maintenance on electronic systems.
• Manage projects and follow up with clients.
• Provide onsite support to diagnose and resolve technical issues.

APPLY NOW!!!

• Min. Diploma in IT or Engineering field
• Min. 1 year of working experience in Project Management or related field
• Familiar with Windows, Word, PowerPoint, Excel, and Access

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66287 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Project Engineer (Mechanical / Electrical Engineering)

We are currently seeking a highly organized and detail-oriented individual to join our team as a Project Engineer. In this role, you will be responsible for overseeing and managing various engineering projects from conception to completion. You will work closely with cross-functional teams to ensure projects are delivered on time, within budget, and meet the required standards.

As a Project Engineer, your role will involve analysing project requirements, developing project plans, conducting feasibility studies, and coordinating project resources. You will also be responsible for monitoring project progress, identifying potential issues, and implementing corrective actions when necessary. Additionally, you will collaborate with external stakeholders, such as clients and contractors, to ensure effective communication and successful project outcomes.

To excel in this position, you must possess strong project management skills, technical expertise, and excellent problem-solving abilities. You should be able to work well under pressure and manage multiple projects simultaneously. Exceptional communication and interpersonal skills are also essential for effectively collaborating with various stakeholders.

Responsibilities

• Develop and implement project plans based on project scope and objectives
• Conduct feasibility studies and perform risk assessments to ensure project viability
• Coordinate and allocate project resources, including personnel, materials, and equipment
• Monitor project progress and ensure adherence to timelines, budget, and quality standards
• Collaborate with cross-functional teams to identify and resolve project issues
• Conduct regular project meetings to provide updates, discuss challenges, and make decisions
• Prepare and present project reports, including status updates and performance metrics
• Maintain effective communication with clients, contractors, and other external stakeholders
• Good knowledge or certified in WSH.

Requirements

• Bachelor's degree in electrical/electronic/mechanical engineering with 2 years of experience
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application and AUTOCAD
• Proven experience in project management, preferably in an engineering or construction setting
• Strong knowledge of project management methodologies and tools
• Solid understanding of engineering principles and construction processes
• Exceptional problem-solving skills and the ability to think critically.
• Strong organizational and time management skills with the ability to prioritize tasks effectively.
• Ability to work well under pressure and meet tight deadlines.
• Detail-oriented and able to maintain a high level of accuracy in all work activities.
• Excellent team player with the ability to collaborate effectively with cross-functional teams.
• Professional certification in project management is a plus.
• Familiar with relevant WSH certification courses for commercial and industrial areas.

• Assist to manage IT functions including hardware maintenance, software application and hardware upgrades, data migration and system installation. Provide hardware support for printers, monitors, Desktop PCs, Laptops, smartphone devices.
• Work with the team to plan and execute the selection, installation, configuration and testing of Company’s IT Hardware.
• Manage, maintain and back up company’s IT network and desktop systems on a regular basis.
• Identify, investigate and research user questions and problems as well as isolating and resolving information systems problems.
• Manage/participate in new setup or upgrade of systems, and monitor system utilization.
• Perform problem management (analysis for frequently occurred incident – solve root cause) and troubleshooting of network operating problems, desktop applications, hardware cause identification and resolution.
• Maintain and up-keep IT equipment inventory and documentation, in compliance with IT policies and procedures. Responsible for hardware and software licensing and compliance.
• User management and general support of application systems and work closely with application and infrastructure teams.
• Any other ad-hoc duties as required by the company from time to time.

Requirements

• Degree in Computer Science/Information Technology or related discipline.
• 3-4 years of prior experience (Previous experience working in technical support role (user and system support), within a Microsoft environment)
• Proficient in setting up Windows 2016/2019 servers with good knowledge in hardening and securing of Wintel systems.
• Competent in the administration of Active Directory, Group polices, DNS, DHCP.
• Competent in supporting Windows 10/11 OS, Microsoft 365 services, and other common desktop applications.
• Relevant experience in the installation and administration of VMware ESXI and vCenter.
• Relevant experience in configuring and troubleshooting firewalls and network switches. Sound knowledge of networking concept or CCNA certification would be beneficial.
• Good knowledge of PowerShell/Batch scripting.
• Good knowledge of identifying security related issues such as computer viruses, worms, and spyware.
• Ability to relate to users from all levels to understand users’ requirements and balance with system capabilities.
• A good team player as well as ability to work independently.
• Enjoy providing both phone and face support.
• Possess a strong customer-focused attitude.
• Willing to work beyond office hours or on weekends to support occasional maintenance or operational needs.

Electrical Engineer (Satellite, Radio Frequency)

The Electrical Engineer is required to attend to pre-sale electrical matters and provide suggestions on project specification and give calculation on the amount of electricity consumption.

Responsibilities:

• To conduct and lead design reviews for Radio Frequency/ Satellite, Network communication systems.
• Responsible for SATCOM/Micro Wave system and network configurations, acceptance, interface and performance testing and commissioning of SATCOM/Microwave systems.
• Understand contractual and project requirements and specifications, propose and generate (SATCOM/MW) system architecture and designs.

Requirements:

• Good in handling Electrical Engineering skills and provide calculation on electricity consumption.
• Ability to calculate on the amount of Electricity required.
• Expert in electrical engineering.
• Good in handling Single diagram and sizing; SLD
• Responsible in handling Electrical Input and output of the equipment and Sizing of electrical equipment
• Good in handling Modulators and Voltage regulator
• Experience in handling Low noise amplifier and Electrical wiring.
• Good in handling Electricity Calculation, Drawing, Design and management of electrical specification with cost and time line.
• Strong knowledge of Radio Frequency, Microwave, Satellite (Satcom) and Microwave.
• Diploma/Degree in Electronics/Electrical Communication Engineering.
• Experience in handling Radio Frequency/ Satellite and Network.
• Proficient in operating RF and electronics test and measuring equipment such as signal generator and spectrum analyzer
• Experience in Satellite/Microwave Communications and Network is an added advantage.

We respect your privacy and all communication will be treated with confidentiality.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with your updated resume in MS Words format to : [email protected]

*Only shortlisted candidate will be notified.

Lee Kelvin No. R1872625)

STAR CAREER CONSULTING PTE. LTD (EA License: 20C0353)

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

The TikTok Account team provides identity and access related services to TikTok and TikTok ecosystem businesses (Ecommerce, Business, Music, Live). We are building Account as a foundation service to empower business innovations.

As a product and platform team, we build robust and reliable systems to facilitate the company's various directions, also proactively facilitate user account access growth and security. We are facing engineering challenges across scalability, reliability, security and system performance, as well as a wide variety of business challenges.

On this team, you're a big-picture thinker and strategic team-player with a passion for doing what’s right.

Responsibilities:

1. Design, test, deploy and maintain backend services and core components of distributed systems.

2. Conduct system designs and code reviews.

3. Collaborate with other engineering teams to elevate technology and consistently apply best practices.

4. Constantly evaluate and improve efficiency, scalability, and stability of our systems.

Qualifications

Minimum Qualifications

1. BS degree in Computer Science, Electrical Engineering, Computer Engineering or related areas.

2. Experience in one or more programming languages such as Go, Java, C++, Python etc.

3. Abilities to quickly ramp up on new technologies, tools and domain knowledge.

4. Experience in backend server development and database solutions.

Preferred Qualifications

1. Good problem-solving, analytical thinking capabilities and exceptional attention to details.

2. Good communication and collaboration skills.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

The Role:

• Lead Engineer role for mechanical scope.

• Perform all engineering design assignment (Core: Pumps, Compressors, Blowers, Turbines, Machinery, Package Equipment. Option: Vessels, HVAC).

• Checker role for department rotating/package deliverables.

• Prepare specifications, data sheet, and inquiry documents.

• Perform all discipline engineering assignment and design work.

• Perform technical bid evaluation.

• Mechanical handling and movement study.

• Coordinate with disciplines for layout.

• Review of vendor documentation and vendor management.

• Provide technical requirements and assessment for inspection and QC-related matters.

• Participate in site surveys, HAZOPs, and various workshops.

• Participate in FATs, shop inspections and provide technical support during construction, pre-commissioning stage.

• Handle interface matters and coordinate with relevant parties.

• Must be ready to work at construction site and be ready for working overseas upon request.

• Other work-related requests from Department Manager/Supervisor.

The Requirements:

• Degree in Mechanical Engineering, with 12 to 15 years experience in the industry.

• Has onsite experience for field engineering, commissioning and troubleshooting.

• Familiar with Shell DEPs, Exxon GPs, Chevron CES and GMPs design is an added advantage.

• Familiar with and have experience with pumps, compressors blowers, turbines and other industrial package.

• Possess ability to interpret client requirement, identify deviations and coordinate for resolutions.

• Demonstrates the ability to verify own product for error free output and draft technical resolutions for issues, communicate interface matters timely to various discipline.

• Experience to lead an amalgamated team of engineers working in different locations.

• Competent in English language and proficient in MS Office programs.

• Competent in planning and coordination with relevant parties both internal and external.

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

What you'll do:

As an IT Engineer (e-FX) [Contract], you will play a pivotal role in developing and maintaining applications utilised by users in the Financial Market. Your daily responsibilities will encompass adhering to secure coding guidelines, rectifying bugs and defects in custom developed application software, implementing change requests, managing data inconsistencies, executing patches, and working directly with end users. You will also manage cloud capabilities including monitoring, software updating, and product line management. Your commitment to continuous learning and improvement will propel your success in this role.

• Adhere to best practice secure coding guidelines such as OWASP
• Rectify bugs, defects, and functional non-conformities in custom developed application software
• Implement change requests for small to medium functional modifications or enhancements to Legacy Applications
• Rectify new and existing errors and inconsistencies with data stored in underlying data repositories linked to Legacy Applications
• Execute patches and proactive remediation for Legacy Applications
• Work directly with end users to create effective solutions
• Manage cloud capabilities including monitoring, software updating, and product line management

What you bring:

The ideal candidate for this IT Engineer (e-FX) [Contract] role brings a wealth of experience from similar roles or environments. With a Bachelor's degree in Computer Science or equivalent, you have spent at least 3 years honing your skills in IT engineering. Your experience with Electronic FX platforms sets you apart, as does your understanding of trade analytics tools like KDB+ and Mosaic. Your expertise spans across various technologies within the IT operations landscape. You are known for your excellent analytical and problem-solving skills which enable you to thrive under pressure. Your strong communication skills allow you to work effectively both independently and within a team. An understanding of agile methodologies and IT Risk & Security concepts will be advantageous in this role.

• Bachelor's degree in Computer Science or equivalent
• 3+ years of experience in a similar role or environment
• Experience with working on Electronic FX platform with FX domain appreciation
• Beneficial to have experience in trade analytics (KDB+, Mosaic)
• Expertise in broad technologies in the IT operation landscape
• Excellent analytical and problem-solving skills with the ability to work under pressure
• Strong communication skills and ability to work both independently and within a team
• Understanding of agile methodologies
• Experience or affinity with IT Risk & Security concepts

What sets this company apart:

Our client is a leading player in the Financial Market sector, known for their commitment to innovation and excellence. They offer a dynamic and inclusive work environment that encourages continuous learning and improvement. Their focus on employee development and engagement sets them apart from other companies in the industry.

What's next:

Ready to elevate your career? Apply now!

Submit your application today by clicking on the provided link!

Do note that we will only be in touch if your application is shortlisted.
Robert Walters (Singapore) Pte Ltd
ROC No.: 199706961E | EA Licence No.: 03C5451
EA Registration No.: Bhargava Aviral R23112008

Key responsibilities:

• Provide IT support operation on daily basis, include below activities:

- IT asset management (include the hardware and software) – manage all company IT asset with proper traceability record;

- Support HR on all employee on-board/off-board process including IT training;

- Provide all IT system setup and admin work; (file control, VPN setup and special software admin work support);

- IT Level 1 helpdesk support to all company staff include remote user from worldwide, it could be PC issue, office printer, phone system or network related issues;

- Troubleshooting AD/DC, Exchange server, File Server and Application server issues and provide a solution.

- Troubleshoot and configure the firewall, router and switch when issues arises.

- Escalate to 3rd party IT support vendor if issue couldn’t be fixed within same day, coordinate with IT support vendor resolve issues within TAT, document down for all IT issues and solutions in return document;

- Liaise with IT vendor management, include IT hardware/software quotation, costing, PR process and make proposal if any recommend system tools).

• System maintenance work on regular basis, include below activities:

- All System backup (File server backup, NAS storage backup, offline backup activity), verify all system backup files are working properly;

- Coordinate department head on storage Clean up include File server, SharePoint and NetApp;

- Monitor Server room temperature and humidity, and make sure all server related equipment (E.g.: UPS) are working under good condition;

- Pulse check all on server, router and firewall log and flag out all abnormal activities immediately;

- Regular update antivirus related tools and window related system patches.

• IT governance and direction:

- Maintain all IT related record (contract, agreement, software authorization, etc.) and regularly updates or renew on time;

- Keep updating and release new IT P&P (Policy & Procedure), BCP(Business Continuity Plan) and DRP(Disaster Recovery Plan);

- Working with finance and country IT support on IT budgeting yearly basis and review it quarterly;

- Assist external or internal auditor on IT compliance or ISO related audit;

- Evaluate vendor proposal and provide justification to management.

• IT related projects management (Ad Hoc or on-going) and provide weekly basis updates to management):

- IT project plan, budgeting and proposal;

- IT project deployment after project approved;

- IT project verification and provide necessary training to end user;

- IT project sign off and documentation.

Additional responsibilities:

• Any reasonable task assigned by management and deemed to be within the individual’s capabilities to ensure smooth running of the business.
• As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.

Responsibilities

• To provide 24 x 7 support for Data Center running on 12 hours shift

• Assisting the Customer in the verification, isolation and/or provision of a temporary work around for the incident/problem logged

• Resolving the incident/problem onsite

• Escalating unsolvable problems and service requests to the System and/or Software Engineer and reporting the escalation to the Project Manager

• Generating the relevant administrative records and reports.

• Introducing and integrating new technologies into existing environments

• Applying operating system updates, patches, and configuration changes

• Adding, removing, or updating user account information, resetting passwords, etc.

• Answering technical queries

• Maintaining the configuration of the system

• To implement Service Request and Change Request

• Contacting OEM/Vendor for technical support

Requirements

• Degree/Diploma in Computer Science/Electronics/IT or equivalent

• Minimum 1 year of relevant working experience in IT infrastructure operation

• Preferably with Microsoft Certification and/or ITIL certification

• Good Knowledge of following products will be advantageous: Linux, Unix, Active Directory/DNS , Microsoft Azure Stack, Microsoft Windows 2008-2016, Commvault Backup and Recovery & Symantec Endpoint Protection

• 12 hrs shift working

Licence no: 12C6060

Job Description:

1. Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
2. Perform electrical and Instrumentation troubleshooting.
3. Able to work and trouble shoot with AC low voltage single phase and 3 phase systems.
4. Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
5. Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
6. Experience in 3 phase generator control interfacing to grid power.
7. Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva).
8. Understand and develop electrical panel schematics if needed.
9. Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting.
10. Update and control of Electrical specification, procedure and drawings
11. Material Management including consumables, parts and spare unit
12. Responding to breakdowns, diagnosing faults, record and report.
13. Review and approve of service, repair and overhaul equipment, record and report.
14. Managing routine 5S at the maintenance workshop, store and work area at site.
15. Communicate with clients, consultants, project personnel and relevant authorities.

Job Requirements:

1. Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
2. At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations.
3. Strong Electrical Knowledge.
4. Results oriented individual with robust technical abilities.Able to work independently and in a team.
5. Possession of LEW is an advantage.
6. Knowledge of preventative maintenance systems and their administration.
7. Knowledge of Maintenance and Asset Management is an advantage.

Others:

1. Working hours: Monday to Friday (8am to 5pm)
2. Company Transport / Transport Allowance $120 if candidate possess own vehicle to work
3. Sign-On Bonus

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Project Engineer (Marine Engineering)
• Working Location: Tuas West
• Working Hours: Monday – Friday, 9am – 5.30pm (One Saturday per month, 9am – 12pm)
• Salary Package: Up to $5,500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist the sales team in project execution.
• Coordinate and manage project documentation, liaising with customers and suppliers on project-related matters.
• Oversee internal and external coordination on issues related to quality, engineering, delivery, and commissioning.
• Perform additional duties as assigned by the manager.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Electrical/Marine Engineering or equivalent with at least 2 years of experience in project management; experience in marine projects is a plus
• Willingness to travel as required.
• Proficiency in Microsoft Word, Excel, and PowerPoint.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70693 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Audio Visual (AV) Solutions Provider
• Position Title: Sales Engineer
• Working Location: Kallang
• Working Hours: 5 Days (Mon – Fri, 9am – 6pm)
• Salary Package: Basic Salary + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Drive sales performance to meet targets and maintain client relationships.
• Engage in B2B sales activities, identifying new opportunities and guiding them to closure.
• Collaborate with business partners and work with the internal AV Design Team to tailor solutions to client needs.
• Negotiate pricing with partners to ensure competitive bidding.
• Compile and deliver weekly sales reports (specific to Assistant Sales Manager role).
• Aid in managing relationships with manufacturers for audio and related solutions.
• Target primary markets within the hospitality and education sectors.
• Seek and establish partnerships for audio solutions to broaden offerings for existing clients.
• Focus solutions on Pro Audio Solutions for large venues such as theatres and auditoriums.

APPLY NOW!!!

• Minimum Diploma in any discipline.
• At least 1-2 years of relevant experience in the AV Industry.
• Proven sales experience in a B2B setting and project-based environment is preferred.
• Familiarity with Pro sound solutions for large venues, Audio & Visual, videoconferencing, and telephony solutions is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70802 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Working hours: Part-time

3~4 days 8hrs/day, 8:30am to 5:30pm

KEY RESPONSIBILITIES

This position involves a combination of technical expertise, project management, to support and drive sales. Acts as a crucial link between the technical and commercial aspects of projects, the Project Proposal Engineer ensures customer satisfaction and successful handover to the Project Execution team.

Key Responsibilities

Collaborative Sales Approach

 Partner closely with all stakeholders to serve customers effectively and meet team sales targets.

Proposal & Quotation Preparation

 Analyze requests for proposals to understand project scope, technical requirements and customer expectations.

 Identify potential risks and propose mitigation strategies in proposals.

Customer Engagement and Technical Assistance

 Handle inquiries via various communication channels, provide technical assistance and advice, follow up on quotations, negotiate terms, close orders, and maintain customer relationships.

Cross-Department Coordination

 Work with Sales teams, Service, Finance and Supply Chain departments to gather necessary input for quotations and proposals.

Additional Responsibilities

 Perform any other tasks required by the Company to support its business strategy.

KEY REQUIREMENTS

 Diploma or Degree in Control/Electrical/Mechanical Engineering or equivalent

 At least 3 years’ experience in Instrumentation and Automation/Control Engineering

 Relevant Technical knowledge (Would be an advantage)

 Systematic and meticulous

 Strong ability to work effectively within a team environment.

 Ability to handle multiple tasks simultaneously and prioritize effectively.

 Excellent communication skills, both written and verbal.

KEY COMPETENCIES

 Technical knowledge

 Effective communication and interpersonal skills

 Self-Motivated and Independent

Test Engineer

Our reputable client is looking for a System Test Engineer Lead (Selenium) to handle test plan, design, planning and setting up Test Lab. The incumbent is required to lead Installation, checkout, integration and testing (ICIT) at customer’s sites.

Responsibilities:

• Involved in System Test Plan and System Engineering Design.
• Responsible for Planning and Setting up Test Lab and conduct Factory Acceptance Test.
• The ability to perform Troubleshooting and Resolving System Faults and Perform On-Site Acceptance Test.
• Involved in lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Strong in performing System Test and Design.
• Strong knowledge in handling Infocomm Technology, RedHat Linux, Virtual Environment, Network Security.
• Experience in handling System Test Plalnning and Troubleshooting.
• Minimum 5 years of System Test experience using Selenium.
• Experience in leading a Team of Engineers.
• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Project Engineer (Electrical & Electronic)

As a Project Engineer, your role will involve analysing project requirements, developing project plans, conducting feasibility studies, and coordinating project resources. You will also be responsible for monitoring project progress, identifying potential issues, and implementing corrective actions when necessary. Additionally, you will collaborate with external stakeholders, such as clients and contractors, to ensure effective communication and successful project outcomes.

To excel in this position, you must possess strong project management skills, technical expertise, and excellent problem-solving abilities. You should be able to work well under pressure and manage multiple projects simultaneously. Exceptional communication and interpersonal skills are also essential for effectively collaborating with various stakeholders.

Responsibilities

• Develop and implement project plans based on project scope and objectives
• Conduct feasibility studies and perform risk assessments to ensure project viability
• Coordinate and allocate project resources, including personnel, materials, and equipment
• Monitor project progress and ensure adherence to timelines, budget, and quality standards
• Collaborate with cross-functional teams to identify and resolve project issues
• Conduct regular project meetings to provide updates, discuss challenges, and make decisions
• Prepare and present project reports, including status updates and performance metrics
• Maintain effective communication with clients, contractors, and other external stakeholders

Requirement

• Candidate must possess a Bachelor's Degree in Engineering (Electronic & Electrical).
• Familiar and experience in ISO certifications and WSH.
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application, AUTOCAD and SolidWorks.
• At least 2 years of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or Mechanical equivalent.
• Experience in handling both consultants and clients will be added advantage
• Strong working knowledge of relevant codes of practice, building regulations, and authority submission and approval procedures.
• Proficiency in engineering design software and analysis tools.
• Excellent communication, collaboration, and interpersonal skills.
• Ability to manage multiple tasks effectively and prioritise deadlines.

• Follow blueprints and building plans to meet the needs of clients

• Install structures and fixtures, such as windows and molding

• Measure, cut, and shape wood, plastic, and other materials

• Construct building frameworks, including walls, floors, and doorframes

• Good at fabrication kitchen cabinet

• fully operate the production

• Able to work in a team

• Hardworking and willing to accept new ideas

• Skillful

• Knowledgeable

• Dedicated to job

• Positive mind set

• Working attitude

• Productivity

• Able to work with long hours and public holiday

· To assist the Project Manager or Project Engineer in the daily execution of work;

· Inspecting construction sites regularly to identify and eliminate potential safety hazards;

· Enforcing site safety rules to minimize work-related accidents and injuries;

· To supervise the work of sub-contractors and in-house workers;

· To work closely with other site operations staff to meet the project schedule;

· Ensure installation is carried out as per construction drawings;

· To monitor the progress and quality of work being performed by workers;

· Ensure that works are executed within an acceptable standard of workmanship;

· Attend the daily tool-box meeting and convey clear instruction accordingly;

· Understand and ensure compliance with project requirements and scope of work.

Summary of Qualifications

1. Vocational Certificate in any relevant technical discipline;

2. At least 3 years of working experience in the related field;

3. Proven experience working as a Site Supervisor;

4. Good knowledge of local building codes and construction safety regulations;

5. Working knowledge of construction tools and equipment;

6. Possessed of relevant safety certification (SCWSH / BCSS / CSOC / W@H / First Aid etc.) is desirable;

7. Highly proactive attitude, self-motivated, team player, problem-solving skills;

8. Excellent organizational and communication skills;

9. May need to work on Sunday and public holiday.

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Roles & Responsibilities:

• Follow blueprints and building plans to meet the needs of clients

• Install structures and fixtures, such as windows and molding

• Measure, cut, and shape wood, plastic, and other materials

• Construct building frameworks, including walls, floors, and doorframes

• Good at fabrication kitchen cabinet

• fully operate the production

• Able to work in a team

• Hardworking and willing to accept new ideas

• Skillful

• Knowledgeable

• Dedicated to job

• Positive mind set

• Working attitude

• Productivity

• Able to work with long hours and public holiday