Total 3,956 firmware engineer job vacancies in D05 Clementi New Town, Hong Leong Garden, Pasir Panjang

Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing corrective and preventive maintenance of CCTV Surveillance System
• Responsible in assisting in planning of the Preventive Maintenance Schedule

Requirements

• Min Nitec in Information Technology/ Electronics/ Electrical Engineering or relevant
• Min 1 years of working experience in computer networking, CCTV set up and Video Management System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supervising and checking subcontractors’ works according to design drawings, specifications, shop drawings, method statement and local codes and regulations.
• Responsible for design calculation, cost estimation, preparation of plans and details engineering design.
• Responsible for coordinating with supplier / sub-contractor of the tender specification and obtain the quotation from them.
• Responsible for overseeing and be overall responsible for works carried out by junior supervisors assigned under their care.
• Responsible for keeping daily work record, including additional work claims to the clients and from the ubcontractors.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 3-4 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices
• Conversant with local codes and regulations.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and deploying functional networks which include LAN, WLAN, WAN
• Responsible in monitoring network performance and integrity and resolving issues tiers of support have escalated by troubleshooting cloud and local infrastructure
• Responsible for planning out network installation and/or upgrade project, assign milestone tasks to support personnel and meet company deadlines for full implementation,
• Responsible for creating, overseeing and testing security measures
• Responsible for mentoring junior team members

Requirements

• Min Degree in computer Science, Engineering or a related field
• Min 3 years of working experience as a Senior Network Engineer or Network Administrator
• Professional certification (e.g. CCNP, CCDP)
• Experience in network administration and architecture
• Experience with access control models and network security

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for developing of test scripts, issues tracking and test management
• Responsible for conducting qualification test of new product or revised component with issuing of test report and recommendations to the test findings
• Responsible for testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)
• Responsible for preparation of samples and coordinate with PQS EN or certification bodies for product certification
• Responsible for evaluating and analysis of competitors’ products – teardown analysis, VA/VE

Requirements

• Min Diploma in Engineering or relevant
• Min 2 years of working experience in production quality or test lab.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

Requirements

• Diploma/Degree in Engineering/Science/Production/IT

• Preferably experienced in high-tech, high-vol manufacturing environment

• Good leadership and communication skills

• Willing to work 12-hour shifts (day or night)

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Title: Application Engineer (ID4539)
Location: Tiong Bahru
Working Hours: Mon to Fri 8.30am-6.00pm
Salary: $3000-$4500

Job Description:
• Provide technical support to users and liaise with development teams for maintenance and updates required
• Optimize applications by integrating new technologies and performing upgrades
• Contribute to manage UAT, demonstrate prototypes and completed applications
• Generate ideas for software innovation based on market trends
• Document development processes, procedures and application version histories
• Keep up with advancements in application engineering and new technologies
• Create efficient and logical databases for clients

Requirements:
• Diploma or higher professional qualification in Computer Science
• At least 2 years of relevant experience
• Proven work experience as an Application Engineer or similar role
• Strong lead developer experience in one or more of the following: Microsoft C#.Net, Microsoft VB.NET, Microsoft SQL Server, Microsoft Azure, PHP, React, Mobile Apps and AWS Micro Services
• Extensive experience in deploying, optimizing, and maintaining software.
• Excellent analytical and problem-solving abilities
• Exceptional customer service, interpersonal, collaboration and communication skills

Responsibilities:

• Contribute in I4.0 transformation of current Industrial & Manufacturing processes to drive improvement in the process-chain
• Work closely with key stakeholders to understand requirements & build clear problem statements
• Coordinate with Global team to define this project & synchronize with the existing activities & initiatives
• Introduce new IoT sensors to specific machines & Test Benches
• Connecting the sensors to local & network nodes for data collection in the right format
• Integrate the data with existing Cloud Platforms
• Run Simulations
• Perform live data analysis to derive key conclusions and measurable KPIs e.g. for live tracking of system faults / predictive maintenance
• Documentation of the Project & Communication with external & internal stakeholders

Requirements:

• Min. 3 years of Experience in Industrial Automation / Embedded Systems
• Programming skills in C / C++ / Java / Python
• Possesses proven skills in data engineering and data visualization and using simulation tools
• Industry 4.0 Experience a big plus
• Demonstrate the sensitivity to understand and define key customer requirements
• Excellent communication skills (verbal and written) to liaise with various departments & customers locally and internationally

Other information:

• Working Location: One North
• Working Hours: Monday - Friday, 9am - 6pm

Job Description

As a Senior/ Infrastructure Engineer, you will assume the responsibility of conceptualising and crafting cloud and infrastructure solutions, ensuring seamless integration into diverse on-premise or SaaS environments. Leveraging comprehensive expertise across vertical and horizontal technologies, your focus will be on refining, fortifying, and providing solutions to our clients. This entails overseeing the holistic technical design, encompassing infrastructure elements, integration, connectivity, and hosting.

Roles and Responsibilities

• Managing the project lifecycle of infrastructure setup and implementation for our clients.

• Designing and implementing infrastructure solutions, incorporating multi/hybrid cloud design principles.

• Continuously researching and evaluating new solutions and technologies, integrating insights and recommendations into the development process.

• Demonstrating expertise in the products and solutions of major Cloud Service Providers.

• Specialising in best practices for the design, operations, and support of private/public/hybrid cloud infrastructure, covering Network, Storage, Compute, and Security.

• Identifying potential and emerging technologies with relevance to innovation for the company.

Qualifications and Requirements

• Diploma/Bachelor's degree in Computer Science, Computer Engineering, Information Technology, or a related discipline.

• A minimum of 4 years experience in the design, implementation, and consulting of private/public/hybrid cloud infrastructure solutions.

• Hands-on experience and robust technical skills with a proven track record in IT infrastructure and/or emerging IT technologies engineering, specifically in Platform, Storage, Virtualisation, and Cloud infrastructure.

• Strong working knowledge and the ability to apply architecture concepts, frameworks, and methodologies to projects.

• Experience in business and technical analysis, architecture design, and project

• Possession of PMP and ITIL certifications is considered an added advantage.

JOB SUMMARY

Manufacturing Engineer will be responsible for planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site. The Manufacturing Engineer will adopt as its goals profitability, effectiveness, adaptability, responsiveness, quality, and the continuous improvement of products and services throughout their life cycles.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Able to perform Assembly process for High Level Assembly (HLA). Create procedures for processes and train staffs accordingly.

· Knowledge on assembly drawing, interpretation part drawing and specification is a must. Candidate with Medical product understanding will be added advantage,

· Report writing, perform DFM and able to communicate within internal and external stakeholders.

· Strong understanding on PFMEA, Process Flow, Control Plan and Process risk Assessments.

· Communicate frequently with operations, technical, and quality representatives within area of support through the tier process.

· Provide leadership and commitment in supporting continuous improvements in quality, productivity, and delivery performance through the deployment of continuous improvement framework.

· Reviews all input from Engineering Department, ECO’s, new product releases, configuration control policies, marking requirements, and participates in the DFM process.

· Solid understanding on BOM, ECN process, PCN and shop floor management will good plus.

· Monitor and continuously improve daily quality/efficiency performance for assigned areas. Exposure on Lean Tools example Cycle Time, TAKT Time, LBR is key, waste reduction etc would point to gauge.

· Involve on new product development by working with R&D, New Product Development and Quality to provide Design for Manufacturability guidance on hardware.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply with all procedures within the company security policy.

REQUIREMENTS:

Candidate must possess at least a Diploma, Degree, Engineering (Mechatronic/Mechanical) or equivalent. At least 5 year(s) of working experience in the related field is required for this position.

• Maintain and update documents and records on ISO 9001, ISO 14001 AND ISO 13485 system
• Establish and maintain proper documentation control & distribution
• Conduct internal and external audits. Ensure readiness of all sections for both 3rd party certification body and customer audits.
• Liaise with external auditors and certification bodies in conducting audits
• Generate monthly report/summary of OQA rejects, customer returns, RMA, external and internal 8D and revised specs and procedures.
• Review and update Quality Management System procedures to meet the quality system requirements.
• Ensure system compliance & preparations for Management Review
• Review audit findings and develop action plans
• Manage internal and external corrective action reports (CAR)
• Plan and conduct periodic system audits and participate in customer or supplier audits for compliance.
• Maintain and conduct regular review of calibration and preventive maintenance for instruments and equipment.
• Direct and head internal audit programs by reviewing procedures, while recommending improvements for all internal audit policies and procedures
• Perform any other duties, as assigned by superior.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 3 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 3 years of ASIC design.
• experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.