Total 3,722 maintenance job vacancies in Singapore

Job Description

• Report to the maintenance supervisor.

• Inspect machinery, buildings, electrical systems, piping, and equipment to ensure safe, well-maintained conditions, identify hazards, defects, and the need for adjustment or repair.

• Perform troubleshooting and repairs to the issues identified.

• Perform routine preventive maintenance (oil change, filter replacement, cleaning, bearing etc) to identified equipment/facility.

• Install new machinery, equipment, piping or structure.

• Complete maintenance work orders as assigned and in a timely manner.

• Operate a variety of machinery, equipment and tools including saws, drills, grinders, welding machines, drill presses and various hand tools.

• Maintain inventory of tools, supplies, spare parts, consumables and equipment; recommend tools, supplies, and equipment for purchase.

• Basic ability to read, interpret and work from blueprints, drawings, procedures , or oral instruction on machinery, equipment, piping system or project.

• Install or replace electrical contacts, panel, relays, plugs, switches, outlets.

• Perform other general maintenance tasks including housekeeping, landscaping, painting, and carpentry.

• Ensure replaced parts or equipment are of correct specification and properly tagged.

• Perform assigned responsibilities, duties, and tasks according to established practices, procedures, techniques, standards in a safe manner and with minimal supervision.

• Observe all company and legal, safety, health and quality policies.

• Report quality issues, accidents, safety violations, or other concerns.

• Perform functional test of the repaired item before handling over to the stakeholder.

• Ensure cleanliness, tidiness and safety of work environment.

• Respond to off hours critical calls to resolve facility/equipment issues.

• Perform other tasks as assigned by the supervisor/management.

Job Requirement:

• Forklift license is a plus (if not, training will be provided)
• Min GCE 'N' or 'O' or Nitec is preferred (Electrical / Electronics / Mechanical / Mechatronics or relevant).
• Able to understand basic mechanical/electronics/electrical drawing.
• Knowledge of DCS/PLC programming and instrumentation related skills will be of added advantage.

• Bread Manufacturing
• Basic $6500 - $8000
• AWS + Variable Bonus
• 5 Days (Office Hours)
• Location: Clementi area

Responsibilities

• Lead a team of engineering supervisors and shift engineers to diagnose mechanical and electrical breakdowns, assessing the best course of action and conducting a root cause investigation to eliminate the likelihood of re- occurrence.
• Project lead for all installations, overhaul of equipment and plant, working with suppliers to ensure they deliver on time, on budget and with minimum disruption
• Lead the implementation of a factory wide PM system using the current Process Control System, and ensuring PM activity is carried out during factory downtime at the correct frequency to an agreed standard.
• Effective manage an Engineering team including performance management, training and development
• Ensure that all projects are engineered to scope, budget and relevant standard and regulatory compliance.
• Fulfilling a key role within part of the site management team, being fully accountable and reporting on assets and ancillary plant downtime across site.
• Lead all on site preventative maintenance activities.
• Budgetary management/control, responsibility for the day to day management of the site repair and maintenance budgets
• Implement safe systems work and managing 3rd party site engineering works, liaising with the operations team to ensure that plant critical repairs minimize plant disruption or managed out of hours.
• Upholding GMP engineering standards across site, 3rd party technical customer audits & statutory inspections are passed any non-conformances are closed out with root cause analysis to avoid repeat failure.
• Continuous improvement of engineering ways of working to ensure improved equipment performance. A six sigma qualification would be desirable but not essential however knowledge of continuous tools and techniques is essential
• Lead the implementation of autonomous maintenance deployment process across the site.
• Responsible for maintaining and improvement of all engineering assets and developing an asset care strategy
• Setup an effective Engineering planning function, leading the development of Job Libraries and codifying repair

Requirements

• Degree in Mechanical or Electrical Engineering
• Minimum 5 year's management experience in engineering, project and maintenance management within food manufacturing industry.
• Demonstrates understanding of project management and engineering from a technical and operational point of view
• Strong analytical, problem-solving and decision-making skills
• Excellent planning, organizational skills and sense of urgency
• Background of hands-on experiences from new line installation project and/or focus improvement project will be advantageous

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

Job Location : Orchard

Work Timings : Shift work ; 930am to 630pm & 1300-2200 ; 5 days work week inclusive of weekends and PH

Industry : Retail

Salary : Basic + Allowances + AWS + VB

Job Description –Maintenance & Electrical Supervisor

Basically, your duties as a Maintenance & Electrical Supervisor are as follows:

a. Plan, co-ordinate and supervise the operation, maintenance, repair and implement improvement works to all M&E and Building service and refrigeration systems, including renovation and maintenance works.

b. Prepare and ensure schedules such as Maintenance Schedule, Repair Work Schedule and M&E Equipment Operation Schedule, and deadlines for events and installations works are met accordingly.

c. Carry out daily inspections and tests of mechanical and electrical equipments/ Plant/ BAS ACMV System:

• Check daily operation and implement periodic preventive maintenance programme

• Evaluate breakdown cause and provide temporary solution/s for (further) repair/ replacement works

• Oversee contractor’s work

d. Carry out research, design and advised on mechanically functioning plant and equipment such as machine tools, engines, heating, ventilating and refrigerating installations.

e. Prepare and generate the following reports:

• Consumable reports

• Utilities reports

• Expenditure reports

• Revenue reports

f. Provide technical advice to subordinates.

g. Study labour requirement, estimate cost of installations, operations, maintenance and repair.

h. Procurement of quotations and parts for repair/ replacement/ new installation works; check bill of quality and evaluate cost of quotation.

i. Co-ordination with contractors for renovation and new installation works, scope of works and quotation.

j. Plan and supervise construction installation, operation, maintenance and repair.

k. Check completed work to ensure compliance with specifications and safety standards.

l. Anaylze situation and introduce improvement works, repair and rectification works to department store.

m. Compile and vet M&E drawings for renovations to ensure it complies to all M&E regulations. Provide comments on renovation/ promotion counter drawings.

n. Any other job-related duties as and when assigned by the company.

Responsibilities:

• To plan, manage a team of technician and callback and ensure daily operation are carried out according to requirements set by HDB and Town council.
• To Monitor Tele Monitoring System (TMS) mantrap, daily breakdown rate and chronic lifts data and consolidate all the informations and conduct weekly preventive measures meeting and share the informations with all the team leaders.
• Carry out monthly and quarterly lift servicing according to assigned schedule.
• Joint inspection with Town Council and BCA pertaining to the adherance of the regulatory requirements set by BCA and relevant governing bodies.

Requirements

• Min Nitec in Engineering
• At least 1-2 years relevant Supervisory working experience.
• Good inter-personal and communication skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or you can send to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Support after-sales services, prepare service reports.
• Responsible for carrying out on-site installation and commissioning, troubleshooting, repair and
• maintenance.
• Responsible in daily field service works and operations.
• Plan training material and conduct training to clients or users.

Requirements:

• Min Diploma in Mechanical / Electrical Engineering or its equivalent
• At least 1 year related working experience in Medical / Healthcare / Laboratory/Refrigeration
• product is a plus
• Able to commit standby and travel if required.

Interested candidates who wish to apply for the advertised position, please click on

the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we

may collect, use or disclose your personal information for purpose in connection with the services

provided by us.

• Assist in M & E services maintenance
• Supervision of contractors in additions and alterations
• Supervision of building maintenance works, cleaning services, security, landscape and pest control services
• Diploma in Engineering/ Building Management/ Building Services/ Real Estate
• Minimum 3 years of working experience in building services maintenance work
• Preferably a certified Fire Safety Manager
• Able to communicate with all levels
• Computer literate
• Service-oriented mindset
• Able to commence work immediately or within short notice will be an added advantage

Overview: -

• 5 Days (Monday to Friday), 8:00 a.m. to 5:00 p.m.
• Monthly Base Salary: Up to $3200 (Depending on working experience)
• Transportation Allowance + AWS (13th Month) + Variable Bonuses

Your Responsibilities: -

• Carry out servicing of elevators, escalators and mechanical-parking systems that includes checking, oiling, greasing, mechanical adjustment, trouble-shooting, testing of safety devices, inspection and parts recommendation and replacement, in accordance to local code of practice.
• Attend to breakdown maintenance calls at various job sites.

You will need: -

• Minimum 1 year of relevant technical experience in lift industry
• Comfortable to travel islandwide as per the site requirement

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibilities:

• Troubleshoot day-to-day manufacturing issues, identify and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
• Assist Engineer in data collection and organizing data for analysis. Perform failure analysis improvement tasks and efficiency as well as product yield.
• Ensure all activities are complying with SOP, ISO, GMP/GDP and FDA.
• Maintain good housekeeping and 5s at the workplace.
• Coordinate and participate in maintenance functions of all manufacturing equipment and ensure that they are all on good conditions. Schedule and perform all chemicals mixing activities and accountable for chemical mixing quality.
• Coordinate with calibration team for calibrate the measurement tool with need/required for on schedule calibration.

Requirements:

• Minimum Nitec in Engineering related
• At least 1 year of experience in equipment maintenance
• Experienced in semiconductor industry

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

This is a 12 months contract assigned to our client

Work Location: To be confirmed

Salary Range : $6,000-$8,500

Job Description

1. Pega Platform

2. Design, build and configure applications to meet business process and application requirements.

3. Configuration & Release Management

4. Design & Build Enablement

5. Build Management

Skills which are good to have / optional

1. Pega version 8.x development experiences (must have)

2. Certified Pega System Architect

3. Certified Pega Senior System Architect

Chin Swee Rd (near Chinatown MRT)

6 days (8 hrs/day including 45 mins break)

Shift hours: 7am – 3pm; 3pm – 11pm; 11pm – 7am

$1900-$2300

Responsibilities:

• Attend to guest room and public area maintenance as reported by Front Office and Housekeeping.
• Carrying out preventive maintenance of all electrical installations and equipment.
• Other tasks and responsibilities includes upkeeping and maintenance of fixtures & fittings, carpentry, painting and plumbing works.

Requirements:

• Possess minimum National Technical Certificate – 3 (NTC 3)
• Able to perform 3 rotating shifts, including weekends and public holidays.

Whatsapp: +65 80135651(Alvin)

Alvin Chua Ming Jing:R23116192

The Supreme HR Advisory Pte Ltd: 14C7279

As a Pega Professional, you will contribute to the development, delivery and maintenance of technology-based business solutions. You are skilled in designing, coding, testing, and implementation of configuration changes to software applications to meet both functional and technical requirements. You may have also some oversight responsibility for the technology solution.
Key Responsibilities:
Designing and developing Pega BPM applications.
Designing class structures, application frameworks, and data models.
Coordinating with the project team to ensure the business architecture matches the needs of the customer.
Integrating business databases, legacy systems, and web services.
Troubleshooting application issues, coding bugs, and bottlenecks.
Integration of technical and application components to meet business requirements
Designing, coding and testing program modules that meet design specifications
Maintaining, tuning and repairing applications to keep them performing in accordance to technical and functional specifications; perform preventive maintenance activities; providing user support

Proven work experience as a Pega developer with at least 3 years’ experience using Pegasystems framework Preferably certified as Pega Senior System Architect (8.x) Strong understanding of Pega methodologies (Agile Scrum preferred) Experience with full lifecycle Pega implementations (Pega 8.x) Demonstrated understanding of various Pega Rules components – including: DX API, UI, Activities and Flows, Declaratives, Decision, Validation, Reports, Correspondences Ability to troubleshoot complex software issues.

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Job Responsibilities

• Study, check and analyse contract documents such as scope of works, specifications and drawings, etc.
• Study existing equipment, maintenance schedule & procedures and coordinate with clients, subcontractors and competent engineers to execute the work accordingly. Propose new schedule if there is plant operational constraint.
• Preparation of check list, test forms and reports in accordance with specifications and relevant standards.
• Planning and liaising with company engaged licensed charge men and competent engineers.
• Application of permit to work (PTW) for the relevant works.
• Check the existing equipment including brand/model/part number for replacement and make necessary enquiry to suppliers for that equipment supply and delivery and supervision to replace the faulty equipment and commissioning. Where the same existing equipment brand/model/part number are obsolete or not available, to find other equivalent, propose and look for clients’ approval.
• Attending of power failure and fault/breakdown maintenance whenever required.
• Supervision on HT, LT Switchboards, Transformers, Battery Chargers, lightings & power and ancillaries for maintenance, servicing, testing and commissioning.
• Supervising on checking and testing of electrical system earthing and lightning protection system.
• Supervising on maintenance of lighting, power, air-conditioning and fire alarm system.
• Preparation and submitting of maintenance reports to client.
• Attending site meetings and safety meeting as and when required.
• Strictly follow rule and regulations set out by authorities and clients.
• Ensure the workplace safety and good housekeeping.
• Ensure all personnel involved in the works are wearing personal protective equipment (PPE) all the time throughout the works.

Job Requirements

• Electrical engineering degree or diploma holder with minimally 3 years of working experiences in electrical installation and maintenance in industrial plants.
• Technical skills and knowledge of HT, LT Switchboards, Transformers, Battery Chargers, lightings & power and ancillaries for maintenance, servicing, testing and commissioning.
• Knowledge on partial discharge test and infrared thermal scanning.
• Entry Level are also welcome.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Mechanical) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): costing, quotations, RFI, Engineering, negotiation, claims, procurement, liaison with clients, liaison with contractors, field engineering
• Preferably Junior Executive specialized in Engineering - Oil/Gas or equivalent. The individual would be required to do site-visit and prepare project costing.
• Regular and timely follow-up with clients to support Request-for-Tenders.
• To smoothly manage a response to 'Request for Tenders' (RFT) or 'Request for Proposals' (RFP) issued by existing or prospective clients.
• This is a key role in the organization. You would require to coordinate with other departments to consolidate the tender submission.
• The parties will include our sub-contractors or joint partners. You are to warrant completeness in submission and put forward the best possible response which will demonstrate value-creation in our tender.
• You will need to assure all deadlines are met as well as manage the graphic design and visual presentation of both hard copy and digital version.
• Close follow-up and strong customer service attitude to handle commercial negotiation

Responsibilities

• To perform maintenance and servicing of lift/escalator, attend breakdown calls, carry out repairs &
• replacement of parts & other duties assigned.
• Ensure that all standard operating procedures comply with specifications, quality standards,
• statutory and regulatory requirements
• Schedule routine and preventive maintenance as needed.
• Establish and maintain a work order system to fulfil repair requests.

Requirements

• Min Nitec in Engineering
• At least 1-2 years relevant working experience.
• Good inter-personal and communication skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY

button below to send in your resume or you can send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we

may collect, use or disclose your personal information for purpose in connection with the services

provided by us.

• Provide direct reports to the technical manager on the progress of scheduled vessel machinery or equipment shutdowns for maintenance, repair, and servicing of marine machinery & subsystems conducted by subordinates.
• Oversee a team of mechanics to ensure the safe shutdown, isolation, overhaul, calibration, commissioning, and testing of marine main propulsion 4-stroke diesel engines, auxiliary machinery, cargo pumps, and deck machinery, while also monitoring daily work activities and progress.
• Perform tasks and activities, including standard maintenance and repair work such as preventive and corrective maintenance, ensuring they are executed safely and effectively in workshops or onboard vessels, such as engine rooms, pump rooms, or decks.

Requirements:

• Nitec in Marine/Marine technology/Mechanical/Aero Engineering or equivalent.
• At least 2 years of Seagoing or offshore experience as a Marine Engineer Officer (MEO), handling at least 3000 KW, meeting STCW Standard A-III/3.
• Prior experience as a service engineer working with marine diesel engines, turbochargers, or marine equipment is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Driver Responsibilities:

* Provide chauffeuring services to Director and family

* Attend to the Director’s requests on all transportation needs

* Carry out routine inspection on the cars to ensure that it is always in good condition

* Maintain cleanliness and regular servicing of the cars

* Plan & deliver transportation of merchandise, products, equipment to shop locations

* Road & parking fines shall be borne by driver

* Perform any ad-hoc duties as assigned

Maintenance Responsibilities:

* Comply with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety.

* Performs general preventive maintenance and corrective repair of equipment day-to-day repairs

* Utilise handy man skills such as carpentry, plumbing, electrical, painting, cooling system.

* Order necessary materials and supplies to complete repair and installation and modification of salon equipment, fittings and finishings .

* Maintain mechanical & electrical systems at all salon facilities

* Responds quickly to emergency situations, summoning additional assistance as needed.

Requirements:

* Possess valid class 3 driving license to drive an Alphard

* At least 3 of working experience in the related field is required for this position

* Clean driving records

* Familiar with Singapore roads and landmarks

* Able to commit to overseas assignments as required

* 5.5 days week

Jet Aviation, a wholly owned subsidiary of General Dynamics (NYSE: GD), has been enabling global flight with passion since 1967. From a single maintenance hangar in Basel, Switzerland, to some 50 locations and 4,000 employees worldwide, our offering includes Aircraft Management, Aircraft Sales, Charter, Completions, Defence, FBO, Maintenance, and Staffing. We are the effort behind effortless. The dream of flying has always been a human fascination, evoking emotions and the sense of freedom. Modern business aviation attracts people who share that passion. People from all over the world converge at Jet Aviation, creating a unique cultural mix. They combine their competencies and passion with one common mission: to serve customers best!

As a Licensed Aircraft Maintenance Engineer, you will;

• Deliver and oversee aircraft inspections, modifications, maintenance tasks, repairs, within license scope
• Always ensure safety and maintenance quality
• Ensures the timely and accurate recording of work performed on the aircraft
• If needed, perform oversees off-base aircraft projects without supervision.
• Supports Aircraft Maintenance Supervisors in coordinating with and functionally overseeing Technicians to perform tasks.
• Comply with all Aviation Security, Quality, Environmental, Health and Safety (SQEHS) and airworthiness requirements.

Minimum Requirements:

• Valid B1/B2 license holder without limitations (preferably CAAS or EASA)
• Gulfstream, BBJ or ACJ is preferred Aircraft type rating
• English language capability to communicate, read and understand maintenance, safety or quality manuals or documentation
• Effective communication skills to exchange technical information
• Ability to manage priorities of the job effectively and efficiently

• Specialising in Facilities Maintenance
• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Facilities Management, Building Services, Engineering (Civil, Mechanical or Electrical) or equivalent.
• At least 5 Years of working experience in the related field is required for Executive position and at least 10 Years for Manager position.
• Required Skill(s): Microsoft Office
• Preferably Senior Executive specialized in Engineering - Civil/Construction/M&E/Facilities Maintenance or equivalent.
• Preferably candidates with valid Class 3 Driving License (M)

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R24120303

Responsibilities:

• Work as part of a maintenance team ensuring fleet availability for client
• Manage planned maintenance activities
• Conduct troubleshooting of systems onboard vessels
• Supervise and guide workers in mainenance tasks
• Coordinate with suppliers , contractors when required
• Coordinate with Owner Rep on issues pertaining to maintenance task
• Any tasks as directed by Site Manager

Requirements:

• Diploma or NTC in Mechanical or Marine Engineering or related
• Possess knowledge in Mechanical, Engines and Electrical principles
• Able to communicate effectively with internal and external stakeholders
• Able to work during weekends and public holidays and on odd-hours
• Willing to work in Brani area, with company transport provided

Other Information:

• Official Work Hours: 7am - 5pm
• 5 Days Week
• Company Transport provided to Gul

• 3 years experience in drafting

• Have basic knowledge of architecture and hardscape

• To produce shop drawing and as built using AutoCAD

• Review project specs, technical and detail drawing.

• Coordinate with Architects, Engineers and other Contractors on any issue and approval.

• Able to work in team or independent

• Managing organizational sales by developing a business plan that covers sales, revenue, and expense controls.
• Meeting planned sales goals.
• Setting individual sales targets with the sales team.
• Tracking sales goals and reporting results as necessary.
• Overseeing the activities and performance of the sales team.
• Coordinating with marketing on lead generation.
• The ongoing training of your salespeople.
• Developing your sales team through motivation, counseling, and product knowledge education.
• Promoting the organization and products.
• Understand our ideal customers and how they relate to our products.

• Accomplishes department objectives by supervising staff and organizing and monitoring work processes.
• Maintains staff by recruiting, selecting, orienting, and training employees and developing personal growth opportunities.
• Accomplishes staff job results by coaching, counseling, and disciplining employees.
• Plans, monitors, and appraises job results.
• Conducts training.
• Implements and enforces systems, policies, and procedures.
• Maintains safe and healthy work environment by establishing and enforcing organization standards and adhering to legal regulations.
• Completes operations by developing schedules, assigning and monitoring work, gathering resources, implementing productivity standards, resolving operations problems, maintaining reference manuals, and implementing new procedures.
• Controls expenses by gathering and submitting budget information, scheduling expenditures, monitoring variances, and implementing corrective actions.
• Provides quality service by enforcing quality and customer service standards.
• Contributes to team effort by accomplishing related results as needed.