Total 184 Senior Executive process development engineer job vacancies in D27 Yishun, Sembawang

As a NAND CMOS Process Integration Engineer in the Singapore Technology Development department at Micron Technology Inc., you will be responsible for developing 3D NAND CMOS devices scaling and enhancing their performance, reliability and manufacturability.

Responsibilities:

• Develop and innovate critical CMOS Front end/interconnect module. Drive multi-functional teams to optimize existing process flows and develop new innovative solutions to meet product requirements and manufacturability.
• Develop/re-define critical specifications criteria for optimum product performance and drive activities to get them to manufacturing process capability.
• Extract and analyze inline, probe, parametric, reliability, and other critical metrics and predict future behavior of the CMOS device performance of the product to enable early innovative solutions to meet product and device specifications.
• Early introduction, characterization and validation of new CMOS device models and test structures for developing future NAND products.
• 3 dimensions analysis with the use of K2 view to extract layout information and combine with the doping profiles of each implant step for product development and integration solutions.
• Interact and collaborate with TCAD, modeling, and layout teams to drive clearer definition of CMOS device and reliability improvements across multiple tech-nodes and designs.
• Coordinate activities at manufacturing site towards gating experiment funding, conversions, and effectively communicate decisions made to all R&D, manufacturing, and relevant partners.
• Take on leadership role at quarterly yield summits and monthly program reviews in summarizing complex problems, deriving and explaining actions taken to address them and getting R&D, manufacturing, and senior management teams on the same page.
• Assist in the transfer of a new technology from R&D to manufacturing and contribute towards ensuring successful ramp and qualification. Supporting the transfer, documentation and training of module fundamentals into manufacturing.

Requirements:

• MS or PhD in Electrical Engineering preferably specialized in Microelectronics and Semiconductor Device Physics. Prior technology development and tech transfer/manufacturing experiences are preferred.
• Fresh MS/PhD candidates with knowledge of semiconductor process Integration and CMOS engineering.
• Direct fab experience with nonvolatile memories manufacturing, knowledge of TCAD, K2 view layout, and NAND product are highly desirable.
• Ability to develop a strong, holistic, end-to-end understanding of CMOS device and its related module on NAND technologies, related structural and electrical fail mechanisms.
• Deep understanding of probe failure mechanism, ability to do electrical bench data collection.
• Self-motivated, self-governing with proven ability to work in a demanding and dynamic environment.
• Experienced in coordinating cross-functional teams to achieve a goal.
• Solid data analysis, communication and reporting abilities with demonstrated presentation abilities.
• Curiosity and natural tendency of learning new things independently.
• Ability to travel for extended periods of time to the US for collaborative R&D work.

** Job Summary **

We are seeking a driven and knowledgeable Sales & Business Development Executive to join our team. In this role, you will be responsible for expanding our business in the power supply sector with a focus on railways and other electrification projects. The ideal candidate will effectively identify new opportunities and nurture relationships with both new and existing clients.

Job Description:

· Develop and execute strategies to acquire new business opportunities within the power supply and railway

electrification sectors.

· Identify potential clients and stakeholders in the industry, understanding their needs and presenting tailored

solutions.

· Strengthen and maintain relationships with existing clients to ensure continuous business growth and customer

satisfaction.

· Conduct thorough market research and competitive analysis to stay ahead of industry trends and identify

opportunities.

· Collaborate with engineering and project management teams to ensure alignment and smooth execution of

contracts.

· Prepare, negotiate, and finalize proposals and contracts for railway & other electrification projects.

· Achieve sales targets by tracking performance metrics and adapting strategies as needed.

· Attend industry events, trade shows, and networking opportunities to increase market presence and visibility.

Job Requirement:

· Bachelor’s degree in Business, Electrical Engineering, or a related field.

· Experience in business development or sales within the power supply, railway and other electrification sector is

highly preferred.

· Excellent negotiation, communication, and interpersonal skills.

· Ability to build strong relationships with clients and industry stakeholders.

· Results-oriented with a proactive approach to problem-solving.

· Knowledge of the railway electrification industry and relevant regulatory standards.

· Proficiency in Microsoft Office Suite and CRM systems.

**Why Join Us?**

Competitive salary and attractive commission structure.
Comprehensive benefits package.
Opportunities for professional advancement and industry specialization.
A collaborative and innovative work environment.

**Application Process:**
Interested candidates are invited to submit their resume and cover letter, highlighting their experience and motivation for applying, to [your email address].

Requirement

• Diploma or Degree with at least 1 year of relevant experience
• Proficient in various social media/digital marketing channels such as TikTok, Facebook, Instagram and Xiaohongshu.
• Knowledge of video editing will be an added advantage
• Team player and able to work with people from all levels, yet possesses the ability to work independently with minimal supervision
• Possesses strong communication and negotiation skills
• Ability to develop social media strategies and content marketing
• Ability in applying new digital strategies
• Excellent at keeping up with digital trends
• Strong presentation, communication and analytical skills

Description

• Manage social media platforms in terms of contents creation & digital advertising strategy
• Execute digital marketing activities for the brands
• Participate in team brainstorming sessions and assist in the execution of all business development initiatives / plans in accordance to the Company’s strategies
• Familiarity with the in-house CRM system to segment the leads and/or client database to effectively execute marketing campaigns
• Liaise with agencies and vendors to develop digital marketing materials (e.g. Banners, Blog Posts, Paid ads, etc)
• Marketing operations support (i.e.: expense reporting, raising of purchase orders, event logistics etc.)

• Develop new B2B business
• Generate B2B leads and follow up on sales opportunities
• Setting up meetings with potential clients for meetings
• Negotiate sales contracts and terms with clients
• Conducting market research to identify selling possibilities
• Actively seeking out new sales opportunities through cold calling
• Research and identify leads
• Prepare sales proposals and meet with clients for presentations

• Min 2 years of B2B sales experience preferably
• Experience in outdoor Sales
• Singaporeans preferred
• Possess excellent communication and interpersonal skills.
• Ability to work independently and in a team environment.
• Able to speak English fluently

Job Description

• Oversee all the new construction/installation of production and office expansion project and actively involved in all the design work and specification before finalisation or design freeze
• Work closely with IE and end users to define project intention and translate the intention into installed system to meet the its function and performance
• Coordinate for any new tools and utilities hook up or tools relocation activities
• Responsible for coordinating and supervising subcontractors works on site to ensure compliance to internal Safety guidelines and jobs specification
• Ensure timely completion, safety and quality standards of project works
• Prepare and update all site reports and closely monitor the progress of the project including submission of weekly report to Director
• Liaise with end user/IE to define the scope of work, work methods, technical specifications of the services
• Generate RFQ and arrange sitewalk with contractors to explain the project/hookup expectations
• Perform project cost estimation, participating in technical/engineering evaluation of all bidding packages with Purchasing
• After completion of project, responsible to ensure all payments are regularized, projects are buy-off according to procedures. Project closure documentation are obtained like O&M manual, as built drawings, T&C records, all regulatory certificate, Spare part listing and contractor/vendor listing
• Oversee the facility gas operation and maintenance, including but not limited to ad hoc job such as regulator replacement, filter replacement, etc.
• Any other ad-hoc duties assigned by Director/Manager
  
  Required Experience and Qualifications
• Degree in any Engineering. Degree shall be recognized by the Singapore PE Board or IES of Singapore
• Minimum 1–2 years of relevant working experience for Degree
• Possess good project management skills, e.g. able to identify critical path and well verse in Project planning
• Possess good supervision and management skill especially contractor management
• Possess good supervision and management for Project Safety execution and Code compliance especially like working at height, hoisting & Hot Work
• Possess strong proficiency in MS Powerpoint/Excel application is needed. Familiarity with authorities’ requirements will be an added advantage

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Responsibilities and Duties

· Develop a deep understanding of design specifications based on customer requirements, , organizational goals, and business strategies. Conceptualize and develop solutions based on project requirements and Company standards through the use of simulations/modelling to support design concept used.

· Develop design specification sheet with relevant info related to the project and update as and when required and distribute to relevant parties.

· Carry out detailed cycle time study for individual modules to select the appropriate machine or module design. Develop 3D model of the machine and/or modules assigned with optimised design for manufacturing, cost, quality and safety.

· Initiate and carry out internal design reviews to share and explain the completed modules with other departments.

· Initiate and carry out design review with customer base on project schedule

· Revise design and documents based on both internal and external review

· Create and update flow chart for the module or the entire machine

· Create part drawings and assembly drawings based on approved design and obtain approval from department manager

· Create Bill Of Materials (BOM) for the modules assigned based on design schedule given

· Create drawing release file and send out drawings for quotation

· Send out standard part list for quotation based on BOM

· Receive quotation and make price comparison spreadsheet

· Raise PR and get department manager approval and send to Purchase department for negotiation and ordering

· Promptly support any design issues discovered during fabrication and /or assembly stages

· Make necessary modifications needed, update design, drawings and get approval from department manager.

· Release revised drawings to supplier and internal assembly team

· Support machine assembly team as and when necessary, with set up and fine tuning of machines

· Carry out all the activities based on the project schedule given

· Meet quality standards while maintaining working knowledge of relevant technologies and best practices, and upholding company policies, internal, customer standards for machine building and safety.

· Develop, train, and educate junior engineers, guide technical direction, and act as a technical liaison between customers

SPECIAL NOTES:

The incumbent (s) of this position is expected to perform all other related duties as assigned

• Develop new B2B business
• Generate B2B leads and follow up on sales opportunities
• Setting up meetings with potential clients for meetings
• Negotiate sales contracts and terms with clients
• Conducting market research to identify selling possibilities
• Actively seeking out new sales opportunities through cold calling
• Research and identify leads
• Prepare sales proposals and meet with clients for presentations

• Min 2 years of B2B sales experience preferably
• Experience in outdoor Sales
• Singaporeans preferred
• Possess excellent communication and interpersonal skills.
• Ability to work independently and in a team environment.
• Able to speak English fluently

Key Job Accountabilities :

· Set-up wet etch and plating processes

· Write process specifications and operator instructions

· Sustain and provide continuous process improvement through planning, evaluating, verifying and executing procedures to ensure that products meet all customers’ requirements in terms of cost, yield and cycle time

· To provide interim and long-term corrective actions for any discrepancies

· Liaise with customers & potential customers on development & improvement of process, material and equipment capabilities

Required Experience and Qualifications :

· Requires Degree in Physics, Chemical, Material Science, Electrical/Electronics Engineering or equivalent

· Minimum 2 years of relevant experience in wafer bumping or wafer fabrication technology in wet etching chemistry, and/or Plating technology

· Ability to work on 12-hour rotating shifts or swing shift if required

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Description:
As Frontend Central Product Integration Engineering (CPIE) team at Micron Technology, Inc., you will be responsible for leading new initiatives to deliver pioneering process capability, best-in-class bits per wafer (Yield) with the highest quality and fastest speed through innovation and collaboration with mutli-functional teams. Your primary focuses include but not limited to:

• Initiate new data solutions and methodologies to:
1) identify process, test, and design improvement opportunities;
2) modeling, monitoring and aiming for tool performance benchmarking;
3) Process equipment prognostics and process integration optimization;
4) Identity test optimization opportunities for high product grade yield improvement.
• Collaborate with site Process & Equipment Engineering, Manufacturing(MFG), Product Integration Engineering (PIE) and Data Science (DS) team to establish feasibility of new initiatives, demonstrate business values, and prototype solution mock-ups;
• Partner with Global Quality (GQ), Product Engineering (PE), Central PEE(CPEE), Smart Mfg Artificial Intelligent (SMAI), Technology Development (TD), and Suppliers to deliver end to end solutions, implement BKM development and deployment to production.

Collaboration

• Partner closely with multi-functional teams to ensure successful communication and collaboration for project implementation.
• Detail oriented with the ability to work independently
• Dependability and able to work effectively in multi-functional teams.
• Facilitate and lead activities in redefining and optimizing current system, methods, tool, skill to be Best In industry.
• Manage priorities and enhancements to improve business processes and existing systems that are global in nature.
• Willingness to work during non-standard hours when needed to provide support to engineering teams at any Micron site.
• Strong growth mindset and willing to continue to learn, unlearn, relearn.

Communication

• Effective communication skills in verbal/written.
• Self-motivated. Able to work independently with minimal supervision.
• Able to travel as required to support department and company objectives.

Requirement and Technical Competency:

• Experience in PIE, Process & Equipment Engineering and Data Science. Understanding of Process/Product Integration will be advantageous;
• In depth knowledge of processes, equipment and control system;
• Proficiency in data analytical tools such as Y3, JMP, Python to perform numerical experiment. Proficiency in Statistical/Machine Learning will be additional advantageous;
• Proven track record to make decisions, multi-task, and solve problems and address root causes.
• Exhibit critical thinking to find opportunities.
• PhD/Masters/Bachelors with relevant course of study and experience

As the Global FE Layout Senior Engineer at Micron Technology, Inc., you will be part of Micron’s Global Factory Automation team which is responsible for designing Micron’s next generation manufacturing facilities.

Your objective is to develop full factory tool layout models that will be the basis of design for industry leading manufacturing facilities across the globe. You will be part of a diverse group of highly skilled layout professionals who are responsible for tool layout design, construction design support, and the layout business process. In addition, you will partner with Micron’s Technology Development team to develop innovative semiconductor production tools that deliver word-class, trail blazing, capabilities that solidify Micron’s manufacturing leadership.

Primary Responsibilities

• Generate Layout models for Micron’s U.S. manufacturing sites that meet or exceed established critical metric targets.
• Establish Layout requirements during Micron’s quarterly business plan reviews.
• Collect and analyze Layout date for Micron’s manufacturing sites to find opportunities for improvement, recommend design changes, and identify new processes that will improve Micron’s overall manufacturing efficiency.
• Maintain a Layout data repository (SharePoint) that can be demonstrated for historical validation as well as information sharing across multiple departments.
• Collaborate with the Technology Development team to influence the design of future process equipment that enable improved space efficiency.
• Actively engage and contribute to Micron’s environmental sustainability projects.
• Present your layout designs and recommendations to Micron’s Senior Leaders and Executive team.

Requirements

• Bachelor’s Degree in related field or equivalent professional experience (MS Degree Preferred)
• Five years’ specific and confirmed experience
• Expert proficiency using AutoCad, BIM, Revit, Factory Design Utility and other similar Layout software applications.
• Direct experience with process equipment and facilities design.
• Fluent in English both verbal and written.

Working Location : Micron Fab10

As a Senior DDQA (Development and Design Quality Assurance) CMOS Reliability Engineer, you will be primarily responsible for developing and optimizing quality and reliability criteria related to CMOS process for the next generation of Micron's memory parts. You will be partnering with Technology Development (TD) on latest products and technologies related to CMOS Front end/interconnect module and define quality and reliability fail modes especially NUDD (New, Unique, Different, Difficult) with goal to mitigate risk and achieve product qualification milestone successfully. You will also be required to identify, diagnose, and resolve CMOS related problems by applying failure analysis, FMEA or 8D methodology. In this position, you will be working in a highly collaborative atmosphere, interacting with various groups such as Technology Development (TD), Process Integration, electrical and physical failure analysis, Product Engineering, Quality Reliability Assurance Team to develop product that meets Quality and Reliability specs and requirements.

Responsibilities include, but not limited to:

• Drive new CMOS devices or modules for the future technology of NAND from Product Quality and Reliability perspective.
• Define & implement Reliability test methodology for validating the risk of new CMOS module for the next generation of Micron's memory parts.
• Provide insights and guidance to the Global Quality (GQ) management team on topics involving CMOS.
• Interact and collaborate with Design Team, TCAD, modeling, and layout teams to drive clearer definition of CMOS device and reliability improvements across multiple tech-nodes and designs.
• Develop/re-define inline and electrical critical specifications criteria for optimum product performance and drive activities to get them to manufacturing process capability.
• Characterize and validate new CMOS device, models, and test structures for developing future NAND products.
• Develop, establish new CMOS Param or optimize scribe design for CMOS parameters.
• Collaborate with various stakeholders and provide DDQA independent assessment on Quality & Reliability items in various technology development milestones (EPP, SVC, MSC, VME), escalate issues and collaborate for timely risk mitigation and resources, also provide inputs for Leaderships in making decision on passing the Qual milestone (Low Tier Qual/High Tier Qual/Auto Qual etc).
• Support technology transfer to production facilities (some international travel may be required).
• Partner with multiple stakeholders in Process Conversion Review Board Meeting (PCRB) to improve coverage from various aspects of product quality and reliability and prevent post qual escapes or excursion triggered by conversion.
• Identify gaps and drive initiatives/programs/business process to build margin around structural, electrical, and reliability performance.
• Build Product Fail Modes Repository based on NUDD (proactive) and previous issues (reactive), and work with key stakeholder to prevent issues or implement effective detections controls and containment.
• Deliver a new Product Fail Modes Repository and their Effective Detection Controls and Containment Document to meet technology development and Transfer timeline.
• Partner with Manufacturing (MFG) or Central Quality teams on current high-volume products to sustain and further develop the Product Fail Modes Repository through regular refresh meeting.

Minimum Qualifications:

• 4+ years’ experience in semiconductor related engineering.
• Hands-on experience on advanced CMOS engineering and device reliability, integration or characterization, specialized in Microelectronics and Semiconductor Device Physics is a requirement.
• Direct fab experience with nonvolatile memories manufacturing, knowledge of TCAD, K2 view layout, and NAND product are highly desirable.
• Understanding of Reliability items for CMOS and Array
• Understanding of electrical specifications, Probe and Param registers
• Knowledge of 3D NAND Fab processes, flow and common reliability and yield fail modes is preferred.
• Highly skilled at problem-solving activity and capability of leading cross functional team.
• Understanding on technical risk assessment, FMEA, and 8D methodology for root cause analysis and problem solving.
• Effective verbal and written communication skills in English.
• Good multitasking skills and ability to set priorities in a fast moving, dynamic environment.
• Ability to work independently, with minimal direction, and a focus on meeting commitments.
• Real passion for improving product quality to increase customer satisfaction.

Education and Experience:

• Bachelor’s degree or higher in electrical or electronics engineering, physics, chemistry, mechanical engineering, material science, or other applied engineering discipline.

• Develop new B2B business
• Generate B2B leads and follow up on sales opportunities
• Setting up meetings with potential clients for meetings
• Negotiate sales contracts and terms with clients
• Conducting market research to identify selling possibilities
• Actively seeking out new sales opportunities through cold calling
• Research and identify leads
• Prepare sales proposals and meet with clients for presentations

• Min 2 years of B2B sales experience preferably
• Experience in outdoor Sales
• Singaporeans preferred
• Possess excellent communication and interpersonal skills.
• Ability to work independently and in a team environment.
• Able to speak English fluently

Delivery and Performance:

• Assist with the production of budget estimates for project deliverables;
• Support the development of work plans and budgets for all activities in the project;
• Assist with and participate in internal and external reviews;
• Provide quality assurance support;
• Support the maintenance of all works efforts, to ensure they are delivered on time, to cost and quality standards;
• Seek to identify any project obstacles, barriers or any unanticipated risk events;
• Assist the PM to plan, monitor and evaluate project procurement;
• Ensure the integrity of financial and administrative operations in the project.

Method & Technical:

• Develop and implement construction methodologies and techniques specific to post-tensioning, Launching Gantry and Lifting Frame.
• Collaborate with clients to analyse project requirements and develop innovative solutions.
• Troubleshoot complex technical issues and implement solutions in real-time.

Cost Control:

• Monitor project expenses and financial performance, identifying cost-saving opportunities.
• Collaborate with procurement teams to optimize material and equipment purchases.

Project Control

• Track project execution by ensuring timely and adequate reporting;
• Monitor all project activities in relation to the respective project work plans and take corrective action, when necessary, to ensure the timely and cost-effective delivery of project outputs;
• Monitor project progress, identify improvement opportunities, assist with the revision of work plans and advice the project director of possible adjustments to meet the project objectives;
• Monitor contract obligations, develop management systems and accountabilities to ensure all contract obligations are tracked and met, including contractor and client contract obligations.

Safety and sustainability

• Ensure compliance with Workplace Safety and Health (WSH) policies and practices;
• Assess inspections to ensure compliance with organisational health and safety policies, processes and procedures;
• Assess records of accidents and incidents against WSH policies and practices;
• Apply organisational environmental sustainability and green building standards and guidelines;
• Implement risk management plans and risk controls in alignment with organisation's risk management framework.

Personnel Management:

• Lead and motivate the project team;
• Ensure that performance reviews are conducted;
• Ensure safety for all personnel and comply with the company standards

Qualifications and Experience Education

• University Degree in Civil Engineering, Project Management, or other relevant discipline.

Languages

• Fluency in written and spoken English is required.

Work Experience

• Minimum 10 years of relevant experience in project development.
• Experience in Bridge Project with erection works using specific Equipment (Launching Gantry, Lifting Frame) and Post-Tensioning system works.

Additional Requirements:

• Competent in the use of all commonly used computer software – outlook, Microsoft, Teams.
• Able to read and understand technical drawings.
• Ability to work independently, handle multiple tasks, work under pressure and deliver assignments on time.

Job Description

• Join partner recruitment, customer development and negotiation, customer relationship maintenance
• Finding and developing new markets and improving sales
• Build long-term relationships with new and existing customers

Requirements

• Bachelor degree or above, major in finance, legal, business or marketing
• Good communication and negotiation skills
• Ability to build rapport
• Able to work under pressure
• Good time management and planning skills

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Description:

· Your primary role is to assist the Project Manager & Construction Manager in the planning and day to day execution of projects

· Liaise with sub-contractor, consultants and client-reps for the execution of works

· Ensure timely delivery of projects according to schedule.

· Updating of project records for reporting purposes and submission of reports

· Attend site meetings and resolve technical/operational issues independently

· Undertake ad-hoc duties assigned by Project Manager related to project execution

· Prepare construction methods, identifying risks and form up strategies and alternative methodologies to mitigate risks.

· Preparing method statement for construction works including RA and SWP.

· Preparation of RFI for site inspection for construction, MPI test, welding works and post concrete works

· Ensuring that health, safety, environmental policies, and legislations are adhered to.

· Preparing the necessary site reports and other documentation work.

· Coordination with Construction team/ Design Consultant/PE/construction subcontractor, etc. for Detail Design Development.

· Carry out detailed analysis and design of civil, structural, and geotechnical works.

· Prepare design calculation reports and structural drawings for authorities' submissions.

· Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, shop drawing development.

· Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, Strutting, decking, etc.

· Check/Rectification of all the structural drawing/ shop drawing if required.

Requirements:

· Bachelor’s / Master’s Degree of Civil Engineering or other related field.

· Comprehensive understanding of the contract documents (drawings and specifications), , construction sequencing and project schedule requirement.

· Minimum 6 years of civil engineering experience or 2years in a similar role（Senior Engineer）

· Good acknowledge in CAD

· Class 3 driving license

· Familiar with road work construction field

· Be well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure.

· Be well-aware of Underground Structure/Construction Sequences and related civil design works.

Select Group is looking for a passionate and motivated individual to join our team. This candidate will support the business development and enhance the competiveness of our cloud kitchen concept with leasing and on-boarding of tenants at the respective sites.

You will play an important role in supporting the planning, management of lease spaces, tenant relationship and operations management, service performance analysis, as well as execution of operational improvement initiatives spanning across the respective cloud kitchens.

Responsibilities:

· Source and secure suitable tenants that fit into the desired tenant mix for our cloud kitchen

· Ensure timeliness in securing renewals and new leases to maintain the cloud kitchen’s occupancy at budgeted levels

· Evaluate the prospective tenant’s proposal to make recommendations to approving parties for acceptance

· Negotiate and finalize rental and relevant Terms & Conditions with potential tenants

· Prepare and complete relevant leasing documentation and paperwork

· Ensure tenants adhere to the lease terms.

· Establish and maintain good landlord and tenant relationships

· Work closely with other departments (e.g. marketing, strategy) to support the business growth of our cloud kitchens

· Conduct site feasibility studies to support the expansion plan of our other brand portfolios

· Support franchise liaison with our prospective franchisees

Skills / Qualifications:

· Diploma / Degree in Business or other relevant courses

· Minimum 1 – 2 years of leasing experience would have an added advantage.

· Graduates with a passion in F&B/Business Development may be considered.

· Good sales analysis skills or numerical competency will be an added advantage

· A good team player, results oriented, creative and resourceful with a strong eye for details and able to work independently and multi-task in a challenging environment

· Good negotiation skills with excellent written and verbal communications skills.

Roles and Responsibilities

· Make outbound calls to prospects who have expressed interest engaging Company's service

· Make outbound calls to B2B and B2C prospects

· Preparation of quotations and follow ups

· Record prospect information in CRM database

Preferred Qualifications

· Keen interest in renovation industry, willing to learn attitude

· Prior experience working in sales preferred but not necessary

· A driven, enthusiastic and hard-working nature

· The ability to form strong business relationships

· Good verbal and written communication skills

• Develop new B2B business
• Generate B2B leads and follow up on sales opportunities
• Setting up meetings with potential clients for meetings
• Negotiate sales contracts and terms with clients
• Conducting market research to identify selling possibilities
• Actively seeking out new sales opportunities through cold calling
• Research and identify leads
• Prepare sales proposals and meet with clients for presentations

• Min 2 years of B2B sales experience preferably
• Experience in outdoor Sales
• Singaporeans preferred
• Possess excellent communication and interpersonal skills.
• Ability to work independently and in a team environment.
• Able to speak English fluently

Senior Process Engineer

Yishun, Singapore

Who We Are:

Lumileds is a global leader in OEM and aftermarket automotive lighting and accessories, camera flash for mobile devices, MicroLED, and light sources for general illumination, horticulture, and human-centric lighting. Our approximately 5,500 employees operate in over 30 countries and partner with our customers to deliver never before possible solutions for lighting, safety, and well-being.

The Lumileds environment is fast-paced, cutting-edge, intelligent and fun! We are looking for exceptional talent to join our team! To learn more about our company and solution portfolios, please visit https://lumileds.com

Who You Are:

We are looking for someone for the Senior Process Engineer position, with experiences in Lithography (Coat/Expose/Develop/Critical Dimension/Overlay) process knowledge. Additional knowledge in the WET etch/cleaning and plating process will be an advantage.

Position Summary:

Lumileds is seeking a highly-qualified Process Engineer to take responsibility for Operations Engineering under Lithography and WET Engineering Module.

In this role, you will handle daily process related operations, and work with equipment engineers and shift team to sustain and improve the module KPIs.

What You Will Do:

· Process Owner for Lithography and WET/Plating processes on different layers/substrate.

· Take ownership and drive development in Lithography, and WET/Plating Process technology roadmap.

· Drive cost efficiency through innovative process simplification, improving productivity and optimizing current costs model.

· Drive improvement to optimize processes to meet the yield and quality requirements.

· Map-out / Design DOE to understand the interaction between process and hardware parameters and apply the results and knowledge to optimize for best performance

· Process improvement through conceptualize the ideas, characterize and optimize processes / applications needed for successful integration.

· Investigate, analyse root cause to problems with DMAIC systematic approach.

· Work with inter/intra departments on all continuous improvement activities.

· Actively lead, participate and manage project workgroups. Coordinate project activities for successful implementation.

· Prepare specifications, workflow, quality and safety related documentation; Monitor and optimize current procedures and propose necessary changes or improvements through proper documentation, SOP and OCAP.

· Process sustaining and control through SPC and periodic defect Pareto Analysis.

· Maintain Safety & housekeeping at all time for a safe work environment that is compliance to the safety regulations.

· Any other duties assigned by the Engineering Manager.

What You Will Bring (Required Qualifications):

· working experience in Lithography process engineering. Experience in the 6 inch technology and hands on/manual fab will be an advantage (ACT08, stepper, MkV, Micralign).

· Basic knowledge in the wafer fab fabrication is a must.

· Proven track record of problem solving and process improvement in a semiconductor manufacturing

· Possess a high degree of self-motivation, goal orientated and the ability to focus on solving problems and to learn new skills.

· Experience with manufacturing operation, failure analysis and LED knowledge will be added advantage.

· Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.

· Good interpersonal and analytical skills.

· Ability to work independently, be hands-on and expected to dive into technical details as required.

Education (Minimum Level)

· Bachelor's

Field of Study

Chemicals, Materials Science, or relevant engineering degree is required.

Years of Experience (Minimum)

· 5 - 7 years

Preferred Qualifications:

· Additional experience and knowledge in the WET etch/clean and plating will be an advantage.

Lumileds is an Equal Employment Opportunity Employer

Job Description:

• Co-ordinate and work closely with the external parties and customers to plan, organize and execute the project related activities.
• Assist the manager in engineering works such as system designing, documentation, testing & commissioning (T&C) for BMS systems.
• Plan and develop the project schedules in compliance with customer requirements, deadlines, and/or milestones; develop efficient mechanisms to track the project progression in the field and update the schedules regularly to ensure that the activities are progressed within the schedules timelines.
• Responsible for all work site activities such as coordination and supervision works related to engineering works and systems design.
• Ensure timely completion of all the assigned projects particularly the T&C schedules.
• Responsible for project management related activities which include attend work site meetings, job coordination, system designs etc.
• Ad hoc duties as assigned.

Requirements:

• At least a Diploma in relevant fields.
• Minimum 3 years of relevant experience.
• Knowledge in BMS & ELV Systems e.g. PA system, Fire Alarm System, CCTV system, Card Access, Structure Cabling & etc.
• Familiar with BIM (Navisworks) and/or AutoCAD.
• Able to manage project cycle independently with minimum supervision.
• Knowledge in underground cabling work will be an added advantage.

Job Description:

• Co-ordinate and work closely with the external parties and customers to plan, organize and execute the project related activities.
• Assist the manager in engineering works such as system designing, documentation, testing & commissioning (T&C) for ELV and security systems.
• Plan and develop the project schedules in compliance with customer requirements, deadlines, and/or milestones; develop efficient mechanisms to track the project progression in the field and update the schedules regularly to ensure that the activities are progressed within the schedules timelines.
• Responsible for all work site activities such as coordination and supervision works related to engineering works and systems design.
• Ensure timely completion of all the assigned projects particularly the T&C schedules.
• Responsible for project management related activities which include attend work site meetings, job coordination, system designs etc.
• Ad hoc duties as assigned.

Requirements:

• At least a Diploma in relevant fields.
• Minimum 3 years of relevant experience.
• Knowledge in Security System and ELV Systems e.g. PA system, Fire Alarm System, CCTV system, Card Access, Structure Cabling & etc.
• Familiar with BIM (Navisworks) and/or AutoCAD.
• Able to manage project cycle independently with minimum supervision.
• Knowledge in underground cabling work will be an added advantage.