Total 2,438 purchasing engineer job vacancies in sg tuas singapore

Responsibilities:

• Develop green marine solutions that reduces marine carbon footprint, in line with company business objectives.
• Hands on in setting up of test lab to enable development and testing.
• Perform PLC software and algorithm development for electrical propulsion solutions.
• Generate documentation of software architecture and logic flow, test procedures, quality control and any other necessary supporting documents.
• Participate and support commissioning of vessels with similar configurations.
• Troubleshoot and resolve any issues related to our delivered solutions that may arise during the vessel commissioning.
• Any other tasks as may be required by supervisor.

Requirements:

• Min engineering degree in relevant discipline
• Strong software development skills particularly in equipment controls
• Strong analytical and troubleshooting skills
• Hands on person
• Team player
• Good communicator and has no problem engaging with external parties
• Knowledge in power electronics, motor drives, marine propulsion systems is a plus
• Fresh graduates are welcomed

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 5 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Responsibilities:

* Project Engineering, Project Planning and Project Coordination for BMS / Environmental / Water Quality System

* Develop detail proposal, specification, project plan and scheduling

* Prepare coordinating, and monitoring the assigned engineering projects

* Attend Project / site site meetings and inspections

* Provide technical support and guidance to the project team members

* Supervise daily activities such as quality, safety and project delivery carried out on site.

* Work closely with the contractors and the authorities for access, task and troubleshoot site issues.

* Manage project and monitor project progress to ensure smooth completion.

* Provide project status update to management accurately and in a timely manner.

* Attend maintenance issues during warranty period.

* Ensure safe work procedures and environmental control measures are implemented at work site.

* Handle project risk management and issues escalation.

* Prepare and manage project costing, proposal and quotations. Sourcing for material and parts

Requirement:

1. Diploma in Mechatronic / Mechanical / Electrical / Environmental.

2. Min. 2 years experience in project engineering and management

3. Possess positive attitude to learn, has initiative and independent

Interested candidates are to forward your detailed resume stating current & expected salary to [email protected].

We regret that only shortlisted candidates will be notified.

Job Descriptions:

* Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Implementation of IoT, Robotics, Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in IoT implementation

* Knowledge of Building Automation & Process Control

* Experience in IoT, BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in embeded programming, Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

* Willing to travel to overseas on short notice and work after office hour, weekend and public holiday.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

• Manage the company’s projects
• Coordinate between client, company, factory and work site staff
• Work on ensuring good quality and maintain delivery schedules
• Liaise with QA/QC for the third party/client inspections, class survey certification, etc

Requirements

• Degree in structural / marine / naval architecture / civil / mechanical engineering
• Min 4 years of working experience in similar industry
• Good written and spoken English
• Experience in quality assurance and project management, preferably in the construction, marine, or offshore industry
• Leadership qualities expected
• Able to plan and manage project independently
• Come and convince us why you are the best person for the job

Job Description:

• Ensure high quality and timely completion of the assigned work within the established time, budget, including ensuring technical accuracy of drawings, material quantities, specifications, procedures, etc. produced by the Civil and structural discipline
• Prepare, Review, Check, Issue, and follow up on all Civil and structural deliverables up to the issue for the construction stage
• Perform engineering design calculations check and prepare design sketch as required
• Perform/ review steel connection design and steel fabrication drawing review
• Coordinate with other disciplines for inputs/comments on Civil and structural drawings before the construction issue
• Assist in internal & client model reviews in line with Company procedure
• Coordinate with the and Qualified Persons (QP)/ Professional Engineers (PE), involved in the project for timely delivery of Civil and structural documents for local permitting and authority submission
• Provide prompt resolution for all site issues and ensure no delay on the construction due to engineering & constructability issues
• Perform good communication/ coordination with Client

Requirements:

• Min degree in Civil Engineering
• Min 8 years of experience in design, coordination and field engineering of process plant or industrial building development (such as chemical/petrochemical plant/ incineration plant/ food waste, water/wastewater plant/ oil & gas/ refinery/ power/ pharmaceutical etc.)
• Hands on experience working in fast paced, diverse and multi-disciplined coordination
• Adapt with software for Civil/ Structural (both Concrete and Steel) design calculations such as STAAD.Pro, SAP, ETABS, SAFE, TEDDS, Idea Statica, Limcon, etc
• Have knowledge on AutoCAD, Revit, Tekla software for Structural Steel fabrication
• Familiar with Microsoft Word, Excel Spreadsheets, PowerPoint
• Conversant with Local and International Design Codes and Standards such as Euro Codes, British and American Codes for Civil Structural design
• Have knowledge in Local Singapore Civil & Structural Permitting Requirements
• Familiar with Civil & Structural design and drafting activities including ability to review 3D Design, SPR, Navisworks etc. and ability to manage/supervise BIM team
• Able to lead, motivate & guide a team comprising of Engineers/ Designers
• Must have experience in manpower planning and CSA design deliverables execution planning

• Manage & develop new customers based for spare part sales in the industrial, Marine & Offshore/Oil Gas market.
• Responsible for maintaining a high standard level of customer services and good customer relation.
• Responsible for maximizing a high level of profit margin and ensure meeting the pre-set sales target.
• Executing sales & marketing strategies to maximize opportunities in both domestic and international markets.
• Make sales presentation and provide technical support to customer
• Gather information on market demand, competition and latest technologies.
• Submission of weekly, monthly and quarterly reports.

The Senior Infrastructure Engineer is responsible to develop software based on design requirements and ensure software and subroutines are working to specification, program codes have conformed to standards and are delivered with quality meeting schedule and requirements. He will also implement systems in accordance to specifications & service level. Where relevant, perform the necessary system programming & configuration.

• Develop, test, and deploy scalable, secure, and high-performance web applications using Microsoft .Net framework, C#.Net, and ASP.Net

• Design and implement database solutions utilizing MS SQL Server and TSQL, ensuring optimal performance and data integrity

• Collaborate with cross-functional teams to gather requirements, analyze user needs, and translate business requirements into technical specifications

• Troubleshoot and debug issues in existing software applications, providing timely resolutions and enhancements

• Stay updated with industry trends and best practices, continuously enhancing technical expertise and contributing to the improvement of development processes

• Support existing applications and report generation

Required Skills:

• Bachelor’s degree in computer science, Engineering, or a related field

• At least 2 years of relevant experience in software development using .Net technologies

• Proficiency in Microsoft .Net framework, C#.Net, ASP.Net, and web technologies

• Strong experience in developing and optimizing database solutions using MS SQL Server and TSQL

• Solid understanding of software development methodologies, object-oriented programming principles, and design patterns

• Excellent problem-solving skills

• Effective communication and teamwork abilities.

Good to Have:

• Familiarity with PowerShell scripting for automation and system administration tasks

• Experience with Microsoft 365 (M365) platform and integration

• Knowledge of cloud platforms (e.g., Azure, AWS) and services

• Knowledge of google workspace.

Roles and Responsibilities:

• Responsible for preparation and delivery of process calculations, design drawings and other documents for water, wastewater treatment, and air treatment projects.
• Aware the requirements for full compliance to local authorities
• Conduct process calculations such as treatment unit sizing, pipe or ducting pressure losses for above mentioned projects.
• Design PFD, P&ID drawings for these projects.
• Select equipment or propose the parameters for selection of equipment such as pumps, fans.
• Design the layout and section views of the overall treatment system including process treatment units, equipment, and pipings and ductings with the help of drafters.
• Prepare other textual documents in process discipline such as control philosophy, datasheets.
• Evaluate technical documents from subcontractors and suppliers.
• Coordinate the works with mechanical engineers, and electrical, control and instrument engineers.
• Provide technical support to sales and project teams.
• Develop or provide design recommendations, value engineering and training to clients or co-workers
• Liaising with other departments (Project, QAQC or Commissioning) on schedule and deliverables timeline.
• Report to engineering manager.

Requirements:

• A recognized degree in environmental engineering, chemical engineering, mechanical engineering, or all other process related engineering.
• 3 years above work experience in water, wastewater treatment, or air treatment.
• Master degree holders with less experience will be considered.
• Proficiency in CAD, MS office or other design softwares.  Strong analytical and problem solving, critical thinking skills.
• Experiences in ultrapure water treatment, air treatment scrubbers, and thermal oxidizers are preferred.
• Good writing and communication skills.

ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

We are seeking an Electric System Design Engineer to design hydraulic and electric systems for Ro-Ro equipment. As a key team member, you will be responsible for developing high-performance systems that meet safety, regulatory, and operational requirements in Marine Industry. Fresh graduates from Electrical, Mechatronics, or Mechanical Engineering backgrounds are encouraged to apply, as we provide training and development opportunities to enhance your skills.

Qualifications:

• Bachelor’s degree or higher in Electrical, Mechatronics or Mechanical Engineering.
• Strong problem-solving skills and active communication skills.
• Excellent interpersonal and collaboration skills.
• Experience in the design of hydraulic and electric system add value.
• Experience in both of Shipbuilding and Marine industry will be a significant plus.

PROJECT ENGINEER will be under service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.Working in workshop and vessels.
Good communication skills with Ship Owners and Superindents.
Good time Management and work Independently.
To perform any other duties & Responsibilities assigned by superiors from time to time.
Ability to demonstrate and implement cost -saving measures.
Ability to lead to manage project operations, schedule and specifications.
Requirements:- Min 5 Years experience .- Knowledge of MS office.- Able to work OT.- Excellent coordination skills.-

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• Attends and records the daily quality assurance related inspections for mechanical and HVAC installations
• Coordinates with other production departments, clients, and surveyors for Inspection & testing requirements
• Assigns the systems to be tested to the various supervisors and technicians involved in the operation
• Ensures that the Quality work processes to enhance efficiency and productivity
• Reports on non-conformance and issue Improvement notes, where necessary
• Ensures timely completion of project
• Ensures that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements
• Any other assigned duties and responsibilities

Requirements:

• Degree in Marine and Offshore / Mechanical Engineering
• Minimum 5-10 years’ experience with 3 years in marine construction and installations
• Must have ASME PCC-1
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). We have been a Trusted Partner for over a decade, delivering a wide range of products and services, including infrastructure and operational services, authentication services, governance and assurance services, and managed processes. In an ever-evolving digital and cyber landscape, trust and collaboration are paramount. ATS collaborates closely with GovTech, government agencies, and commercial partners to enhance security postures and mitigate cyber risks.

We are seeking a highly motivated and talented individual to join our team as an Application Infrastructure System Engineer. This role will involve assisting the application infrastructure architect on developing, designing, deploying and maintaining the application and infrastructure to support MPA systems, including Messaging Streaming system and other mission critical systems running in both GCC (Government on Commercial Cloud) and on-premises.

The ideal officer should be able to identify optimal cloud solutions for MPA and maintain cloud infrastructures in accordance with best practices and Government agency security policies. You should have practical knowledge and experience of public cloud services and excellent troubleshooting skills. You will work with different IT professionals and teams to ensure the hybrid cloud infrastructure meet the needs of applications and customers.

The ideal officer will also have practical knowledge and experience of event-driven architecture and event-driven integrations with various applications and systems. You will work with different application teams to assist them on the design, develop and integrate event-driven applications. You must be passionate about technology, embrace changes and keen to explore new ways to automate existing processes. You must be a good communicator being comfortable to communicate effectively to all levels and types of employees as well as external partners/contractors.

A brief summary of your job responsibilities:

• Designing, implementing, and maintaining the hybrid cloud infrastructure, such as virtual machines, storage, load balancer, firewall and network virtual appliance components. Integrating cloud-based systems with on-premises systems and ensuring seamless data transfer between the two environments.
• Designing, implementing, and maintaining the Event-Driven messaging infrastructure. Providing technical guidance and governance on application integration and security compliance.
• Designing, implementing, and maintaining Kubernetes infrastructure with service mesh. Automate the maintenance and application deployment in Kubernetes cluster.
• Identify, analyse, and resolve infrastructure vulnerabilities on regular basis.
• Regularly review existing systems and make recommendations for improvements.
• Provide technical guidance and support for various common infrastructure services: Active Directory, DNS, WSUS, IAM, SiteMinder, MSSQL server, SFTP server, Proxy server, RDS, etc.
• Perform regular maintenance on server patching, software update, backup and restore, DR exercise, audit review and account management.
• Designing, implementing, and maintaining the systems comply to IM8 and CSA, security standards, and internal policies, taking appropriate measures to mitigate risks and ensure data protection.
• Automation of resources provisioning and deprovisioning with template and scripting languages.

To excel in this role, you will ideally have:

• Minimum of 5 years of professional experience with Microsoft Windows Server and/or RedHat Linux Server infrastructure.
• Minimum of 2 years of working experience in the field of cloud computing.
• Experience in designing, developing, and managing cloud-based infrastructure and applications
• Technical skill of Powershell, Python and bash scripting and automation
• Experience with IAM solution and modern authentication mechanism: OAuth2/OIDC and SAML
• Willing to embrace changes and new technologies.
• Strong analytical, troubleshooting, and problem-solving skills.
• Strong communication and collaboration skills.
• Ability to work effectively in a team environment and collaborate with cross-functional teams.
• Practical experiences in managing system integrators / contractors / partners
• Azure, AWS, and GCP certifications are preferred.
• Microsoft or RHEL certified is a plus.
• Experience in Solace is a plus.
• Experience in supporting CII (Critical Information Infrastructure) systems is a plus.
• Familiar with IM8 is a plus.

Join us and explore a fulfilling career with Assurity Trusted Solutions, where innovation meets impact!

The remuneration package will be tailored to your qualifications and experience. Interested applicants, please click "Apply Now".

We appreciate your interest and kindly note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used, and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech, and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Annual Leave Benefits with additional perks such as Family Care and Birthday Leave.
• Contract Staff enjoys the same benefits as Permanent Employees.

We are seeking a dynamic Software Engineer (Python) to join our growing global team, Recommendations domain to work on exciting projects like implementation of our own machine learning framework, integrating a feature store for supporting real-time data science requirements and the creation of complex data ingestion pipelines to support this!

Join us in creating an engaging and personalized shopping experience for our users. Every feature and improvement you develop will enhance customer choice and app performance, making it easier for users to find and enjoy the products they love. Your work will have a lasting impact on customer satisfaction and loyalty across diverse markets.

Responsibilities

• Working closely with Data Scientists and Product Managers to run experiments on new recommendation features.
• Deploying low latency databases and datastores to support operational requirements of the recommender models.
• Working with senior engineers to maintain our API Gateway.
• Deploying and maintaining ML models on our deployment framework that power recommendations on all pages of the application.
• Enabling and actively managing observability tools on all touch points within our systems.

Job Responsibilties

• Provide after-sales product and technical support - engaging with customers, clarification meetings, supporting 3rd party events.
• Design BMS system architecture, HVAC control system and optimization program tailored to each upgrading project requirement.
• Analyse existing BMS operation and HVAC performance to propose system renewal and control system improvement.
• Support project management team on existing building upgrades including testing and commissioning.
• Troubleshoot Yamatake and Azbil product problems for existing maintenance at job site.
• Track and analyse recurring faults or issues in BMS and other monitoring systems to identify patterns.
• Use trend date to provide insights on system vulnerabilities and potential areas for improvement.
• Perform various engineering calculation, equipment sizing and selection and procurement of equipment ensuring it meets safety standards and performance requirements.
• Supports the Sales on technical aspect to formulate Business Development plan for Building Automation Solutions in Singapore.
• Liaise with various departments in Headquarter in Japanese language to report the latest trends and requirements of Singapore Market
• Identifies industry trends, collects and assesses competitive and market intelligence.
• Regularly contact with Japanese and non- Japanese customers to exchange information.

Requirements

• Bachelor's degree in a technical discipline preferred;
• Minimum 4 years of experience in BMS and Automation industry
• Well versed in specification and selection of Yamatake and Azbil building automation system and product, not limited to system and controller but including field devices like sensors, control valves
• Strong communication presentation skills with the ability to present technical information to non-technical stakeholders.
• Proficiency in Japanese Language both verbal and written is a must

Education:

Diploma/Degree in Electrical Engineering, Computer Engineering, Computer Science

or with experience of at least 3 years and above
or both.

Programming Competency:

Competent in programming languages C++, C#, SQL database and .Net Framework 2.0 and above environment.

Competent in PLC and inverter systems preferred

Other Requirements

Only S’pore citizens/PRs need to apply.

Able to lead a small team in projects.

Need to communicate with project/site managers regarding project requirements.

Proficiency in English essential as submission of site reports is required.

Preferred

Competent in PLC and inverter systems preferred

Knowledge and experience in port and warehouse cranes, preferred.

Able to use Autodesk electrical CAD with hands on electrical experience, preferred.

Candidates with class 3 driving license are preferred.

Unlock your potential with us! Join us as a Technical Sales Engineer who will be involved primarily in high temperature and corrosion resistant (nickel alloy) materials supporting the petrochemical, aviation, waste to energy, pharmaceutical sector. Your positivity and energy will thrive in this new, rewarding opportunity.

Responsibilities

• Work with well-established customers base in the petrochemical | pharmaceutical | aviation, and OEM industries in Singapore
• Interpret customer requirements
• Understand industry standards and specifications
• Read customer drawings and generate bill of materials
• Formulate sales proposals and negotiate directly with end users to close orders
• Negotiate procurement of materials, parts, sub-contract services and logistics

Requirements

• Degree or Diploma in an engineering discipline
• Working knowledge of industrial piping and related hardware
• Reward driven with a real desire to improve sales and business margins
• Proficient with MS Excel

Advantages

The following optional skills or work experience would be an advantage

• Familiarity with ASME | DIN | JIS and similar material specifications
• Previous experience in a plant or on-site maintenance or engineering role

Additional Information

*The position will be in an office based working environment. No outdoor sales required.

*Applicants without prior sales experience but with engineering background may be considered.

*Monthly Salary Range shown excludes commission component.

Job Description & Requirements

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Skills Requirements

• Degree in Computer Science or Information Technology or equivalent.
• In-depth experience in Java
• Working knowledge of Object-Oriented
• Working knowledge on any web framework, with understand MVC concept on the web-based application
• Working knowledge on conceptualizing and designing web-based application
• Preferable knowledge and experience in Spring and Hibernate Framework, Spring Boot, REST, Drools, HTML5, Oracle.
• Possess a passion in software engineering/development, with drives to be an effective team leader
• Ability to communicate effectively and clearly
• He or she should show self-initiative in learning, and self-development
• Ability to work under pressure to deliver projects within the designated deadlines.
• At least 2 to 5 years of relevant experience

#TeSA #TMCA

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

The Senior Engineer, Projects, will lead and manage projects from initiation to completion, ensuring alignment with scope, budget, and timeline requirements. This role involves overseeing mechanical and electrical components' fabrication, assembly, and installation while coordinating with cross-functional teams to meet project objectives.

Responsibilities

• Lead projects, ensuring timely delivery, adherence to scope, and budget compliance.
• Oversee fabrication, assembly, and installation of mechanical and electrical components.
• Coordinate with factories, contractors, and cross-functional teams to align objectives.
• Review and interpret mechanical drawings, specifications, and technical data.
• Ensure fabrication adheres to layouts and designs.
• Collaborate with the procurement team to ensure timely material delivery.
• Conduct quality checks, testing, and inspections to maintain standards.
• Resolve technical issues and implement corrective actions.
• Planned and coordinated with after-sales teams to ensure smooth workflows.
• Maintain project documentation, including progress reports, Gantt charts, and technical records.
• Supervise inbound and outbound activities.
• Inspect parts to ensure compliance with BOM and data sheets.

Requirements

• Degree or Diploma in Mechanical Engineering or related field.
• 5-7 years in a similar role or industry.
• Proficiency in AutoCAD, Microsoft Office Suite, and project management tools.
• Knowledge of mechanical systems, equipment, and industry standards.
• Strong analytical and decision-making abilities.
• Ability to manage multiple projects simultaneously.
• Detail-oriented with excellent problem-solving skills.
• Strong communication and coordination abilities.
• Preferred candidates should have access to a vehicle.