Total 863 Senior Executive qa engineer job vacancies in SGP - Singapore - Singapore (50 Tuas West Dr)

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

MiRXES is a Singapore-headquartered molecular diagnostic company with R&D, manufacturing, and clinical lab operations in Singapore, USA, Japan, and China. We specialize in microRNA technologies and the development, manufacturing, and provision of diagnostic test kits and clinical services. Our mission is to enable early disease detection and provide insights for better patient care by harnessing the power of microRNA to augment traditional testing. Our vision is to be the world’s leading developer and provider of accurate, actionable, and affordable microRNA-powered diagnostic tests.

Job Location: Tukang

Job Summary

• Maintain and upkeep quality assurance and operational compliance processes within the organization.
• Ensure compliance and adherence to established quality requirements and regulations.

Roles and Responsibilities

Quality Systems:

• Maintenance and upkeep of the quality system.
• Monitoring of quality system processes to ensure compliance to standards, corporate requirements and upkeep of system health.
• Collaborate with Process Owners to set-up/improve processes to achieve compliance and excellence.
• Cross functional collaboration to ensure successful implementation/enhancements to existing processes.
• Document control.
• Drafting and review of documents.
• Assist in 1st, 2nd and 3rd party audits.
• Assist in audit actions.
• Facilitate and assist in risk management activities.
• Upkeep of quality events.
• Monitoring and control of artwork.
• Assist in vendor evaluation/reevaluation.
• Facilitate/assist in validation activities.
• Assist in design/technology transfer.
• Complaint and feedback management.

Product Quality:

• Review of MBR.
• Review of technical documents, inclusive of QC data or technology related documents from design/technology transfer.
• Incoming and outgoing inspection.
• In-process inspection.
• Verification of returned goods.
• Equipment management.

Quality Oversight:

• Act as a point of contact for all quality-related inquiries and issues.

Training and Development:

• Foster a culture of quality awareness and continuous improvement throughout the organization.

Reporting and Analysis:

• Monitoring of quality metrics to line manager.
• Analyze data to identify trends.

Desired Skills & Competencies

• Degree/diploma in a related Science or Engineering discipline
• Extensive experience in quality assurance, preferably in a regulated environment would be an advantage.
• Strong knowledge of ISO 13485, CAP, and ISO 9001 standards would be an advantage.
• Good verbal communication, interpersonal and team skills.
• Results oriented, with a high level of integrity and dependability.
• Prior knowledge in qPCR, molecular diagnostics, and next generation sequencing, technology and techniques would be an advantage.

This position is based in Singapore.

We appreciate your interest in the above-mentioned position, however, due to overwhelming response, only shortlisted candidates will be contacted.

General Overview

This position is part of the site Mechanical team that provides technical/maintenance support to the Operation and Project teams in LNG Terminal. He/she would be mainly responsible for overseeing the safe and reliable operations and maintenance of the Terminal assets from the Mechanical discipline perspective.

The incumbent is also responsible for establishing, reviewing and overseeing the relevant mechanical design elements of new build equipment / asset enhancement activities and implementation of minor mechanical engineering projects, while ensuring the overall mechanical integrity of the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical/maintenance support and solutions to the terminal operation Teams including supporting the development of maintenance strategy focusing on equipment reliability, compliance, spares inventory requirement, preventive and predictive maintenance programmes and mechanical maintenance procedures for mechanical equipment.
• Lead the maintenance, troubleshooting, repair, commissioning and replacement of mechanical static equipment and piping systems.
• Manages the in-house contractor and equipment vendor to execute mechanical work/improvements within the terminal to ensure safe work execution and gas supply reliability
• Responsible to ensure compliance to applicable regulations/industry best practices, safe to operate, fit for purpose, maintainable and reliable for the site’s modified or newly build mechanical systems (such as marine loading arm, pumps, pressure vessel, safety device , etc).
• Manage and ensure list of statutory equipment (lifting machine, lifting gears, pressure vessel, safety valves, etc) are timely serviced and inspected in accordance to statutory codes and compliance standards
• Perform root cause analysis on equipment failure and provide recommendations to resolve technical issues which may also arise from vibration, RT, UT, oil and other analysis as part of predictive maintenance programmes
• Manage and maintain historical information on static and rotating equipment such as running hours, data statistical information on all plant shut down and loss of production events caused by mechanical systems, engineering documents and review applicable codes and standards for compliance purpose
• Lead technical discussions, execute and manage project schedules and cost and collaboration with external and internal stakeholders, vendors for end of life and improvement project using SLNG Management of Change (MOC) process for mechanical equipment
• Liaise with external stakeholder including government agencies on approval and risk of shutdown of mechanical system that will affect gas-send out
• Participate in RCA, RBI, HAZID, HAZOP, Model Review studies for mechanical packages, co-ordinates and close out Mechanical related issues
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose

Work Experience

• Minimum of 3-5 years’ experience in maintenance of plant equipment, rotating machinery and static equipment, preferably in oil/petrochemical or related industries
• Good knowledge and experience working on different types of in-service pipeline inspection. Knowledge of the LNG / natural gas or other hydrocarbon industries an advantage
• Relevant technical experience in maintenance of mechanical/ machinery systems i.e compressor, pump, pressure vessel, hydraulic components and piping system.
• Conversant with local codes, regulations and standards, equipment inspection and schedule requirements. Certified in API, vibration and other analysis standards will be well regarded
• The incumbent should possess the following personal attributes:

1. A team player who can work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments
3. Willing to take up new challenges and responsibilities

Education

• Bachelor Degree in Mechanical Engineering or other relevant Engineering/Technical disciplines
• Candidates with professional accreditation or affiliation to professional bodies of engineers will have an advantage

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Job Description :

• Responsible for all the handshake tests, writeup creation, demo arrangement, sample graphic submission, ICONICS license handling, server arrangement.
• Responsible for Writeup and GUI preparation, Backend development monitoring, server arrangement.
• Designing network architecture, VLAN, network switches and firewall selection, server selection, procurement on network devices, IP assignment, rack assignment, rack power calculation and UPS selection, port assignment
• Monitoring project progress, attending to technical discussions, providing technical support, arranging Software requirement (EMS and MMS), implementing Smart solution
• Getting quotations, PR arranging, PI arranging with BM team, product delivering, attending technical discussions, project progress monitoring, resolving issues
• Selection of licenses, getting quotation from HQ, approving PR, optimizing license requirements, distributing license keys, holding all the license details for past and current projects
• Contacting ICONICS support team, raising tickets to clarify issues, updating status of the issues, arranging monthly meeting with ICONICS, meeting minutes creating and sharing, distributing details of critical fixes, testing new requirements
• Referring technical specs, providing server and license requirement, attending to tender meetings
• Creating and amending technical guidelines for ICONICS, G5, third party integration, graphic creation, project management, D&A, network designing, license selection, server selection, training manual

Requirement :

• Candidate must possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Knowledge of C++/ Phyton/ PLC is needed
• Knowledge in HVAC systems, SCADA software, Building Management systems would be an added advantage

We regret that only shortlisted candidate(s) will be contacted.

As a Sales Engineer / Senior Sales Engineer, you will join our dynamic sales force in developing new businesses and providing professional solutions to our potential clients. Identify new sales opportunities through prospecting.

Job Description:

• Originate and close opportunities to develop new market segments, product groups and channels.
• Identify and canvass new sales opportunities and market through prospecting.
• Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Work closely with General Manager to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Travelling to be expected.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 5 years in marine industry.
• Positive working attitude and self-motivated.
• Preferred who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components MRO.

Additional Information:

• 5 days’ work week
• Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.
• Variable bonus and better medical benefits.
• Career growth & learning opportunity.

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standards pertaining to project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents, and weekly update drawing register form documents controller and distribute to project Quality Assurance personnel.
• Administrates the project's internal quality audit to ensure compliance with the project quality plan.
• Monitors the inspection and documentation activities of the Quality Assurance Inspector to ensure compliance with the inspection test plan and project quality requirements
• Resolves quality-related issues arising from subcontractor and in-house production
• Ensures protection and preservation of various systems
• Ensures updates on electrical completion and mechanical completion progress in the project database
• Assigns the systems to be tested by the various supervisors and technicians involved in the operation
• Reviews the quality work processes to enhance efficiency and productivity
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, Quality Assurance Department, and vendors
• Reports non-conformance and issue improvement notes where necessary
• Any other assigned duties and responsibilities

Requirements:

• Degree in Naval Architecture, Marine and Offshore or Electrical Engineering
• Minimum 3 years of relevant experience in Quality Assurance working experience, and the offshore or marine industry

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Ensure that all works carried out are of highest quality standard to meet customer satisfaction.

Execute the site testing and commissioning activities of the company to the satisfaction of the owners and builders

Liaise with Yard’s commissioning personnel to close out issues which will affect the smooth completion of project

Ensure that Punch List are corrected and Test Memo and Service Acknowledgement Report are signed

Ensure that site issues are highlighted to the Production Manager/Assistant Production Manager in order to come up with proper and timely solution

Inform the project engineers in the event of changes on design, drawings and system operation which may arise during the job execution.

Highlight to Project Engineers any changes that may be required on supplied equipment for quality improvement.

Ensure that the equipment used for commissioning are calibrated and maintained in good working condition to achieve quality standard.

Ensure non-conformity report is being raised as and when necessary.

Ensure that non-conformances are promptly resolved by means of investigation and corrective action.

Job Description:

• Provide pre and after sales technical support to customers
• Perform field service work on site for our range of products
• To clarify product applicaton issues with head office R&D in Japan
• Support Sales Engineers in the areas of product applications, sizing and selection of suitable SMC components to meet end user requirement

Job Requirement:

• Diploma in Electronics/Mechatronics
• Experience in control system (servo drive)
• Minimum 5 years of experience in PLC programming (Omron, Panasonic, Beckhoff, Allen Bradley etc) for senior position

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

The Senior Service Engineer is responsible for providing technical expertise and support at customer sites. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction. This role is also a Team Lead for specific Service Team.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.

Leadership

· Leading and guide team members

RESPONSIBILITY
· Plan and allocate tools, material and manpower for fabrication;
· Ensure that all the technical reviews by engineering team comply with project requirements;
· Coordinate all technical queries with related parties – engineering team, client, vendor etc;
· Assist Project Manager in streamlining work processes;
· Coordinator with team to review all subcontract and supplier shop drawing, product data, samples,
manuals etc for all compliance with contract documents;
· Manage vendor documents for all equipment;
· Monitor and ensure all the vendor equipment delivery are on time, including checks on inspection status and requirement;
· Prepare tender submission, cost estimation and project change request;

*Prepare monthly P&L reporting.

*Able to use AutoCAD – Advance Steel Software.
· Any other duties as assigned.

Please note that duties of the Employee may change and develop over time.

REQUIREMENTS

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechanical) or equivalent

· Proficient in design software such as PV AutoCAD

· Proficiency in English language (spoken and written) with strong communication skills

Job Responsibilities:

1. Team up with chemists to lead a team of lab analysts and technician in executing daily laboratory operations, ensuring compliance with accreditation standards and quality system implementation.
2. Develop and validate analytical methods for the testing of chemical compounds, ensuring accuracy, precision, and reliability. Identify and drive initiatives to enhance laboratory operational efficiency and productivity.
3. Manage laboratory inventory and equipment, including consumables/spare-parts inventory, equipment calibration, troubleshooting, and maintenance planning, to meet quality and operational requirements consistently, ensuring analytical tools are in proper working condition for accurate testing and analysis.
4. Provide support in new product development processes (R&D), analytical metrology, and quality assurance for all products, offering product expertise, providing technical support for new product developments, and addressing technical emergencies.
5. Collaborate with other departments on continuous improvement projects to achieve business objectives.
6. Perform Quality Control (QC) responsibilities, including conducting quality tests, inspections, and analyses to ensure product integrity and compliance with standards and specifications.
7. Investigate deviations, out-of-specification results, and quality-related issues, and implement corrective and preventive actions (CAPAs) as necessary.
8. As quality master to understand product quality, to ensure product to fulfill customer’s requirement.

Job Requirements:

1. Master's Degree in Chemistry with 2 – 3 years relevant working experience in QC lab or a Bachelor’s Degree in Chemistry with 5 – 6 years relevant working experience.
2. Working experience or significant exposure to specialty chemicals or semiconductor wafer fab supplier environments is considered an added advantage.
3. Strong hands-on instrumentation experience such as ICP/MS, GC/MS, UV-Vis, GC/FID/TCD, IC, HPLC, ICP/OES, NIR, and other measurement tools.
4. Excellent written and spoken communication skills in bilingual languages (English and Mandarin) to liaise with English and Mandarin-speaking associates/clients.
5. Hardworking, able to multi-task, and willing to work long hours when necessary
6. Team player with excellent interpersonal skills and a strong sense of ownership with responsibilities to achieve project and business objective
7. Ability to work under pressure, prioritize workload, be systematic, and make sound decisions in a fast-paced environment.
8. Willingness to travel when required.

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

• Minimum 8 years of engineering experience with recognised Degree in relevant field
• At least 5 years of supervision experience of E&M work in the construction site for projects of similar scale, complexity and nature of work
• Candidate must have LTA/ MRT/ rail projects background

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

We are seeking a skilled and motivated Project Engineer / Senior Project Engineer specializing in ship repair and ship refit. The ideal candidate will have at least 5 years of relevant experience in the maritime industry and possess strong project management and technical skills. This role involves managing repair and refit projects from initiation to completion, ensuring compliance with technical, quality, and regulatory requirements.

Job Description

1. Project Management:

• Manage ship repair and ship refit projects, from planning through execution and delivery.
• Develop detailed project schedules, budgets, and resource plans.
• Coordinate with clients, vendors, and internal teams to ensure project objectives are met.

2. Technical Expertise:

• Oversee progress and technical requirements for repair and refit projects.
• Interpret technical drawings, design documents, and specifications.
• Provide guidance and suggestion to production teams during execution.

3. Quality Assurance:

• Ensure all ship repair and refit work adheres to established quality standards.
• Conduct inspections to verify compliance with design specifications and classification requirements.
• Address quality issues promptly with effective corrective actions.

4. Regulatory Compliance:

• Ensure all work complies with relevant maritime regulations and standards.
• Collaborate with regulatory bodies to secure necessary approvals and certifications.

5. Communication and Coordination:

• Maintain clear and effective communication with clients, team members, and stakeholders.
• Provide regular project updates and reports to management and clients.
• Facilitate problem-solving discussions to address challenges and maintain progress.

6. Risk Management:

• Identify potential risks to project timelines and budgets.
• Develop and implement mitigation strategies to reduce impact.
• Monitor risks and adapt plans as needed to maintain project success.

Qualifications:

• Min. of Diploma in marine engineering, Mechanical Engineering, or a related field.
• Minimum of 5 years of experience in ship repair or refit project engineering.
• Strong understanding of ship repair processes, techniques, and materials.
• Proficient in project management with a proven ability to deliver projects on time and within budget.
• Strong leadership, organizational, and team collaboration skills.
• Excellent communication and interpersonal abilities.

Preferred Attributes:

• Familiarity with High-speed craft systems and operational requirements.
• Experience coordinating with regulatory authorities and international clients.
• Completion of SRM (Shipbuilding and Repair Management) course is an advantage.

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At Leica Microsystems, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

Shape the Future with Us!

At Leica Microsystems, we have been shaping the future for over 175 years with groundbreaking optical and digital solutions. With a culture rooted in customer focus, innovation, and teamwork, we lead the market in microscopy, imaging, and analysis, unveiling the invisible and empowering our customers to build a better, healthier world.

Joining Leica Microsystems means contributing to scientific discoveries and supporting surgeons in making critical decisions. Our advanced microscopes and AI-based image analysis solutions enable users to gain profound insights into development and engineering challenges. Here, you will work on meaningful projects alongside passionate colleagues, driving progress and pushing the boundaries of what’s possible.

Learn about the Danaher Business System which makes everything possible.

The Senior Quality Engineer, PQE is responsible to ensure the quality of both medical and non-medical products through rigorous inspections, implementation of quality control measures, and identification of areas for improvement. You will address production quality issues, collaborate with cross-functional teams to find root causes, and drive continuous improvement to build high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering or quality assurance, attention to detail, a proactive mindset, and preferably experience in people management.

This position reports to the Senior Manager Quality Assurance and is part of the Production Quality Engineering (PQE) team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Address production quality issues by identifying problems and collaborating with cross-functional teams to develop solutions for overall product quality improvement.
• Utilize statistical tools to identify trends and patterns for enhancing the production process and ensuring quality.
• Investigate and correct root causes of product failures occurring in the field.
• Conduct periodic production audits to ensure compliance with established policies, procedures, and control plans.
• Participate in lean and continuous improvement initiatives, while adhering to company EHS requirements to prevent injuries and maintain safety.

The essential requirements of the job include:

• Bachelor's degree in Mechatronics, Mechanical Engineering, or Electronics.
• At least 5 years of relevant experience in biomedical or medical device manufacturing.
• Proficient in statistical control methods and QMS 9001; familiarity with ISO13485, USFDA QSR/cGMP, and ISO14971 for medical devices is advantageous.
• Computer literate in MS Office and Lotus Notes.
• Strong analytical, problem-solving skills, and knowledge of lean and investigation tools such as 8D and fishbone diagrams, with a solid understanding of engineering principles, theories, and concepts.

Leica Microsystems, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.