Total 5,117 qa engineer job vacancies in D04 Harbourfront,Telok Blangah, Sentosa Island

Job summary:
Experience in marine and oll & gas sector.
Responsible for the assigned customer account, to ensure all product quality, process quality andsystem quality to conform with customers' specifications and internal quality system reauirements

Roles & Responsibilities:
1.To liaise with Customer Quality representatives on all Quality matters.
2.Lead the investigation on all Customer Quality Feedback, Complaints and CAR with internal cross.functional team for comprehensive root cause failure analysis and ensure closure with effectiveimplementation of corrective actions and preventive actions.
3. Monitor product quality performance and generate quality reports; chair monthly product qualityimprovement meetings to reduce the customer reject and field return rate for continual improvement!Identify Quality lmprovement projects and initiatives to drive Customer Satisfaction with Quality.
4.Establish with customer representative and internal team on New Product Quality plans, procedureswork instruction for overall auality control and coordinate implementatilon and maintenance of suchplans, procedures or instructions; conduct quality training/ cross training for QA inspectors.
5.Audit customer fabrication line for compliance to applicable standards and procedures in QMs andEMS

58 RECRUITMENT PTE. LTD

19C9772

67026282

Job Highlights

• Well versed in ISO 9001, QA metholodogies & tools
• Scope to innovate & develop continuous improvement processes

Job Description

• Develop & implement QMS system & take the lead of continuous improvement process & initiatives
• Provide root cause analysis & preventive action plans to resolve non-compliance issues
• Analyze internal & external data to identify areas for improvement & communicate with relevant parties for quality improvements
• Ensure the compliance with ISO 9001 & all relevant standards to both internal company policies & customer standards
• Maintains and implements the Quality Management System (QMS) for the organization.
• Manages Quality Assurance and Quality Control (QA&QC) by conducting audits for quality system conformance, and by liaising across departments to maintain good documentation control and management.
• Conducts investigations into inconsistent quality processes and non-conformance and recommends preventive actions to eliminate recurrences of such issues.
• Monitors product failure data and performance trends, and initiates remedial actions with relevant departments, where necessary.
• Identifies opportunities and prepares recommendations for continuous improvement in quality, productivity and cost efficiency.
• Handle Customer Complaint resolution, onsite & offsite
• Lead supervise OQA production lot acceptance and FAI submission team for achieving OTD objective.

Job Requirements

• Diploma/Bachelor Degree in Precision Engineering, Mechanical, Quality, Engineering or equivalent.
• Meticulous, thinks systematically and is able to work independently.
• Possesses good organization, problem-solving, interpersonal and communication skills.
• Good knowledge of Quality Management System and ISO 9001-2015. Certified Auditor will be a plus.
• Knowledge of LEAN Six Sigma and 8D Discipline methodology highly desirable.
• MS Excel, PowerPoint a MUST and ERP knowledge an advantage.
• Only Singaporean may apply.

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standards pertaining to project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents, and weekly update drawing register form documents controller and distribute to project Quality Assurance personnel.
• Administrates the project's internal quality audit to ensure compliance with the project quality plan.
• Monitors the inspection and documentation activities of the Quality Assurance Inspector to ensure compliance with the inspection test plan and project quality requirements
• Resolves quality-related issues arising from subcontractor and in-house production
• Ensures protection and preservation of various systems
• Ensures updates on electrical completion and mechanical completion progress in the project database
• Assigns the systems to be tested by the various supervisors and technicians involved in the operation
• Reviews the quality work processes to enhance efficiency and productivity
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, Quality Assurance Department, and vendors
• Reports non-conformance and issue improvement notes where necessary
• Any other assigned duties and responsibilities

Requirements:

• Degree in Naval Architecture, Marine and Offshore or Electrical Engineering
• Minimum 3 years of relevant experience in Quality Assurance working experience, and the offshore or marine industry

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Title: QA/QC Engineer

Salary Range: S$3,400 – S$4800

Report to: QA/QC Manager

Min Qualifications / Experience :

1) Degree in Mechanical Engineering holder with 2-4 relevant experience

Job Skills Required:

1) Knowledge in Microsoft office applications such as Excel, Word, Power Point and

related spreadsheet software.

2) Must be able to work well with others in a team setting.

3) Ability to work independently.

4) Must be able to effectively handle many concurrent projects.

5) AWS, ASME AS, PD5500.

Duties & Responsibilities

a. Assist QA/QC Manager in the managing the QA/QC department.

b. Establish, implement and maintain the QC system for products that need to comply with ASME codes.

c. Prepare, control and maintain the QC Manual in accordance with ASME code.

d. Initiate quality programs and report to QA/QC Manager for the current product quality level.

e. Develop Inspection Test Plan (ITP), inspection and testing procedures.

f. Supervise and guide the team of QC inspectors and administrative assistant.

g. Control the usage of ASME stamps and review ASME’s MDR forms.

h. Maintain and control the welding procedures (WPS) and welder performance qualification records.

i. Any Adhoc assignment given by QA/QC Manager.

Key Result Areas:

1. Manage the quality assurance and control of products and services to meet company and customers’ expectations.

Monitor QA/QC and proper documentation for incoming materials, fabrication, and production for

overseas projects

• Prepare inspection and test plans for façade works (Chart H)

• Prepare documents and procedures for inspection/certification

• Implement schedule to ensure QC Inspectors carry out their duties timely and correctly

• Assign proper checking tools for QC Inspectors

• Identify training opportunities for QC Inspectors to attain qualification and upgrade in their jobs

• Assign work checklist and test plan to QC Inspectors

• Organize and implement QMS and audit, including ISO

• Inspect the proper documentation and filing of QA/QC documents

• Search for source information related to QA/QC matters

2. Ensure the quality of products and services provided by suppliers and vendors

Analyse products and services provided by suppliers and vendors

• Inspect key material supplies such as aluminium, extrusions and glass

• Examine prototypes provided by suppliers and vendors

• Supervise the information of supplies in QA/QC systems and inspection records.

3. Attain high QA/QC in manufacturing and installation processes and methods.

• Analyse manufacturing and installation processes and methods

• Inspect method statement and safety risk assessment

• Check tools, equipment calibration procedures and records

EDUCATIONAL QUALIFICATIONS

•General education/Diploma in QA/QC

RELEVANT EXPERIENCE

• Minimum 5 years of working experience in façade industry with good knowledge in product

specifications, reading drawings, industry standards, design, engineering, fabrication,

installation and quality.

PERSONAL CHARACTERISTICS & BEHAVIOURS

• Meticulous with an eye for details

• Decisive

• Collaborative

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Job Description:

• Monitoring the entire production line with quality issues.
• Work with internal teams to improve the quality of the products
• Familiar with various inspection techniques and able to act as an auditor for quality system

Requirements:

• Require to travel to our malaysia's plant
• Minimum 1 year working experience in manufacturing field
• Previous work experience as a QA Engineer or any similar role
• Minimum Diploma/ Post-secondary/ Polytechnic in engineering or equivalent

Job Description & Requirements

1. Conducts field inspection and verify conformance to approved specifications.
2. Conducts inspection on the installation of product such as AHU etc.
3. Prepare and review documents for project close-out requirements.
4. Conducts in-house orientation on company policies and procedures to employees in preparation for their incorporation to company.
5. Supervise the implementation of punch list (balance of works) issued by client to conform to the established client standards and specifications.
6. Prepare QC inspection reports and monthly accomplishment reports.
7. Proper checklist and progress report must be generated.
8. Conducts line checking on installed items, issue punch list and verify accomplishment prior to endorsement for testing.
9. Conducts pre-qualification of welders for pipe welding works.
10. Conducts inspection on installation of fans and blowers including pre-fabrication and initial testing.
11. Prepare inspection reports for accepted and rejected activities.
12. Conducts receiving inspection on critical materials prior to installation.
13. Attend to coordination meetings and address problems concerning installation problems.
14. Generate Non-conformance reports to activities not conforming to project specifications and monitor detailed action plans for close-out.
15. Prepare and maintain quality manual for the organization.
16. Generate work instructions, company procedures for use by the organization and submission to client.
17. Conduct and prepare analysis of generated NCRs, complaints, and audit results.
18. Arrange with third party inspectors for necessary testing.
19. Implement quality system to the project.
20. Arrange materials documentation requirements and submits to Client Inspection Department for acceptance.
21. Prepare Quality Inspection and Test Plan (ITP) for submission to clients.
22. Review Mill Test Certificates. (For Production Related Works only).
23. Setting QA compliance objectives and ensuring that targets are achieved.
24. Maintaining awareness of the business context and company profitability, including budgetary control issues.
25. Assessing the product specifications of the company and its suppliers, and comparing with customer requirements.
26. Working with purchasing staff to establish quality requirements from external suppliers.
27. Considering the application of environmental and health and safety standards.
28. Agreeing standards and establishing clearly defined quality methods for staff to apply.
29. Defining quality procedures in conjunction with operating staff.
30. Setting up and maintaining controls and documentation procedures.
31. Ensuring tests and procedures are properly understood, carried out and evaluated and that product modifications are investigated if necessary.
32. Supervising technical staff in carrying out tests and checks.
33. Bringing together staff of different disciplines and driving the group to plan, formulate and agree comprehensive quality procedures.
34. Persuading reluctant staff to change their way of working to incorporate quality methods.
35. All QC items must be reported to the Operations manager.
36. Establishing standards of service for customers or clients.
37. Establish and define Standards and Procedure of development requirements for the Product.
38. Formulate, implement and review work procedures to ensure effectiveness and efficiency to meet quality requirements.
39. Evaluate according to ISO requirements and actively provide constructive feedback to development team.
40. Establish and maintain high quality test procedures and methods to be used in present and future software and hardware testing and development that comply with the company quality standards and deliverables.
41. Prepare the requirements for components and / or assembled parts of the incoming inspections.
42. Oversee quality tests and qualify the release of products at the manufacturing side.
43. Oversee the resolution of quality-related problems in the development and manufacturing environment resulting from supply or production imperfections.

REQUIREMENT

1. Diploma in Mechanical Engineering related discipline

2. At least 2 years of related work experience in quality control

3. Good office coordination skill and interpersonal skill.

4. Independent and resourceful.

5. Knowledgeable in ISO documents preparation.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Description & Requirements

• Leading root cause analysis & corrective action in non-conformance investigation

• Establishing quality inspection plans, COC, procedures / work instructions / API testing

• Responsible for performing gap analysis on standards revision and revise procedure / work instructions

• Attend to customer/ supplier / internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent

• Min 1 year of working experience in Oil & Gas / Metal Machining Industry

• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

• Able to work 5.5 workdays

2. SKILLS

Web Testing

Tactics

Game Development

Strong Attention To Detail

MetaL

Unit Testing

Investigation

Root Cause Analysis

Quality Inspection

Machining

C#

Debugging

API

Mechanical Engineering

C++

Job Description:

• Responsible for developing, implementing, and maintaining Quality Assurance Plan for production of company products.
• Benchmark, develop and implement inspection methods and procedures to meet quality objective.
• Collaborate with cross-functional teams to integrate quality considerations into the entire project lifecycle.
• Participate in product testing during design and development cycle and support in product/process qualification.
• Interpret and analyze mechanical drawings with attention to details.
• Identify, document, and report defects or anomalies, working closely with cross-functional teams to address and resolve issues promptly.
• Facilitate meetings for Material Review Board (MRB) disposition.
• Support in internal and external audits.
• Execute in accordance with the Company’s Quality Management System (QMS) requirements.
• Stay current with industry best practices, tools, equipment testing in system and quality assurance.
• Any other duties as assigned by Supervisor.

Job Requirements:

• Bachelor’s degree in Mechanical Engineering or a related field.
• Effective communication skills, both written and verbal, with the ability to convey complex technical information to diverse stakeholders.
• Ability to work collaboratively in a multidisciplinary team environment.
• Strong interest in quality assurance, project coordination, and the related industry.
• Proactive and detail-oriented mindset with a commitment to maintain high standards of quality.
• Demonstrated leadership abilities in coordinating cross-functional teams to achieve quality objectives.
• Possesses strong time management skills, excels under pressure, and demonstrates the capability to multitask efficiently within demanding timeframes.
• Ability to write technical reports.
• Flexibility and adaptability to take on new challenges and responsibilities.
• Ability to read and interpret mechanical drawings with knowledge of measuring equipment.

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

In this role, you will have the unique opportunity to engage in field service, site installation, and perform Quality check on all completed machines.

Job Responsibilities:

• Provide site machine installation and maintenance.

• Attend to service call.

• To conduct in-house and on-site training for customer.

• Investigate and handle customer's complaints.

• Quality check on all completed machines to ensure stringent quality compliance before delivery to customer.

Requirements:

• Diploma in Electrical or Mechatronics Engineering

• Minimum 2 years of field service or QA experience in Industrial Automation projects

• Ability to build strong relationships, work with customers to solve problems

• Good team player with excellent interpersonal and communication skills.

• Meticulous, Quality conscious and Problem solving/troubleshooting skills.

We are looking for passionate QA Assistant (Food Safety) to be part of the department expansion! You will be responsible for all hygiene and food safety standards of assigned locations.

If you are looking for a fulfilling career with Singapore's No.1 Events Caterer, send us your application now!

Responsibilities

• Conduct daily on-site inspection, personal hygiene checks, products checking and sample retention.
• Follow and assist in lab test sampling schedule
• Assists in ISO 22000:2018 manual updated, and implement to operation.
• Responsible for the compliance with MUIS Halal Standards, application and renewal of Halal Certification.
• Assists in checking records, documents, and files.
• Attended to external auditors and internal auditors; assist for internal audit (central kitchen, retail outlets and supplier audit)
• Attended to pest programmes, follow up and rectification.
• Follow and enhanced developed SOPs
• Assist in develop food safety training materials and assessment plan.
• Detect any non-conformance and rectification immediately.
• Any other ad-hoc projects assigned by superior.

Requirements

• A level, Diploma or equivalent, in Food Science/ Technology/ any related standard
• Possess knowledge in SFA regulation, ISO 22000, Halal/ any other related standard
• Able to multitask and work within timeline
• Good communication skills
• Team player, proactive and meticulous in work
• Willing to work in the West

The level of appointment offered will commensurate with candidate's experience.

Interested applicants are invited to apply with your detailed resume via the “Apply Now” option.

We thank you for your interest and regret that only shortlisted candidates will be notified.

• QA (HSSQE) & Vetting Head reports directly to Senior Manager (SM) or General Manager (GM) Fleet Operations.
• Hold the position of DPA and reports directly to Managing Director (MD) on breach of HSSQE matters.
• Establishing, communicating, deploying and maintaining of Company’s Health, Safety, Security, Quality and Environmental related policies and procedures; including the preparation and maintenance of relevant supporting documents, and the provision of training as required.
• Ensuring the companies compliance with relevant flag state/ class approvals/ IMCA, ISO 9001/14001/45000 QMS and Health, Safety, Security and Environmental requirements through formal/informal and internal/external audits and leading the Audit Program.
• Implementing, maintaining, reviewing of Company’s Safety Management System work manuals and procedures, including maintenance of HSSQE related certifications and local regulatory requirements.
• Plan, organize and take lead to drive safety initiatives and promote safety culture within the company and sub-contractors.
• Take lead to conduct vessel safety audits/ inspections to ensure compliance to legal legislations and organizational requirements. Ensure all appropriate investigation of discrepancies, error, complaints, failure, or findings are properly closed, documented, and communicated.
• Lead the Quality Assurance Committee (QAC) for quarterly meeting and Management Review (MR) annually. Submit the reports for SM & MD’s review and comments.
• To prepare and supervise the programme of Internal & External Audits within the office and for the fleet. Monitoring the timely implementation of all drills and audits of the Company and the managed vessels and ensuring the audit results are reported to the SM & MD.
• Lead the incident investigation team and prepare concise investigation reports in accordance to the regulatory and industry requirement.
• Develop effective communication materials and collaterals (include but not limited to safety messages, advisories, campaigns, posters, etc.) for fleet outreach and learning.
• Ensure proper maintenance of policies and procedures for office facilities.
• Supporting the Crewing, Vessel Operations, Technical, and Insurance departments in safety related matters, including interface with clients, underwriters, industry organizations and regulatory authorities.
• Lead the Emergency Response Team and conduct annual office/ship drills.
• Managing the HSSQE reports required by major oil companies and charterers.
• Manage Company’s tanker fleet’s vetting issues ensuring that the vessels are always maintaining a valid SIRE approval and when required a valid CDI approval as well. Maintain
• Company’s managed Bulkers to meet Right Ship vetting requirements.
• Ensure tanker vessels SIRE validity are meeting ‘Charter Party’ requirements so that vessel will not breach the ‘Charter Party’ clause under “vetting” requirement barring company policy limitation.
• Ensure effective close out of all non-conformances, observations and deficiencies resulting from SIRE inspections.
• Reporting to the SM and CST Management periodically on the vessels’ vetting status, planning and progress including any on-going issues if in case of any difficulties encountered that may cause rejection by either Charterers or the Pool partners operating the respective vessels
• Leads the communication with major oil companies on a regular basis checking Company’s MR ratings and approvals.
• To maintain and update quarterly KPI on vetting and tracking of vessels’ performance versus set targets until the final Management Review on overall vetting performance.
• Keep the ship owners updated with fleet vetting plan and status periodically as required by the owners.
• Ensure vessel screening requirements from major oil companies (MOC) and charterers are attended on timely manner for vessel to be approved for business.
• To carry out pre-vetting exercise for the fleet and to attend SIRE inspections with the appointed inspector.
• To update and share with the fleet on SIRE findings to prevent recurrence.
• Manage all aspect of commercial operations to ensure safe delivery of cargo and services. Lead and provide suitable strategic direction in commercial operations to complement and support Charterer/Owner’s business objectives and strategy.
• Manage Company’s tanker fleet’s vetting issues ensuring that the vessels are maintaining always a valid SIRE approval and when required a valid CDI approval as well. Maintain Company’s managed Bulkers to meet Right Ship vetting requirements.

Authority

• Amend, delete or introduce procedures in the Company’s Safety Management System as recommended by the QAC and approved by the Managing Director and/or General Manager.
• Schedule QAC meetings; discuss Internal and External Audit findings, Management and Master Review reports, and non-conformities in Safety and Pollution Prevention Practices/Trainings/Drills, Accidents reports and Quality Management Reports.
• Propose amendments, revisions to the Safety Management System to prevent recurrence of detected nonconformities to the systems and/or procedures.
• To prepare the plans and instructions for the key shipboard operations and assigning them to the qualified personnel.
• Collect reports of suggestions/complaints from customers, suppliers, vessels, etc. and formulates continuous improvement programmes to the Safety Management System.

Information :

Working Hours : Mon~Fri 8:15am to 5:45pm

*Might required to work onboard the vessel and travel occasionally.*

Responsibilities :

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Requirements :

1. 2 years QA Experience in Marine or Industrial

2. Diploma in Electrical Engineering or ITE with relevant experiences

3. Able to speak Chinese

4. Required to work onboard the vessel and travel occasionally.

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972

Position Summary

• Ensure that all inspections comply with construction standards, approved procedures and drawings, client specifications, as well as class rules, codes, and regulations (AWS D1.1)
• Serve as the primary contact and advocate for the PaxOcean Quality Assurance Department, prioritizing all structural quality-related issues and any additional responsibilities assigned by the QA Head.
• Collaborate with colleagues within the QA Department and production teams to enhance quality execution through improved coordination.

Tasks and Responsibility

• Perform Surveillance Inspection to ensure that the construction work is performed and duly meets the project-specific Quality Requirements.
• Verify in-process inspection, final inspection, and welding.
• Carry out Welding control and inspection.
• Record results of inspections and maintain records of specific items as per contract/specifications.
• Administer RFI requests to Clients and 3rd parties and coordinate for inspection as identified in the respective discipline ITP.
• Raise Non-conformance reports as seen during inspection and follow-up on the status of rework and close-out.
• Review all NDT reports and approval.
• Generate weekly weld rejection rate summary and weekly welder performance.
• Witness all testing activities as required by the approved Inspection and Test plan.
• Monitor PWHT activities carried out as per approved procedure.
• Attend to all potential quality issues to prevent the occurrence of defects.
• Prepare Test Packs for Piping Hydrostatic testing.
• Prepare/compile the final punch list before delivery of the fabricated and assembled components.
• Follow up with other discipline HODs to get relevant documents as per the MDR Index for compiling.
• Progressive compilation of records for MDR (Final Dossiers).
• Coordinate with the client for review and approval of the MDR.
• Carry out surveillance activities during project execution.

Job Requirements

• Minimum 5 years of experience in relevant field
• Experience in any degree/diploma
• CSWIP 3.1 and NDT Level-II certification

Position Summary

• Ensure that all inspections comply with construction standards, approved procedures and drawings, client specifications, as well as class rules, codes, and regulations (AWS D1.1)
• Serve as the primary contact and advocate for the PaxOcean Quality Assurance Department, prioritizing all structural quality-related issues and any additional responsibilities assigned by the QA Head.
• Collaborate with colleagues within the QA Department and production teams to enhance quality execution through improved coordination.

Tasks and Responsibility

• Carry out Survey and Inspection on jobs in Ship Building / Ship Repair, Module, and Ship Conversion QC-related activity, as per Quality standards as per Surveyor and Client requirements on schedule time.
• To check all the Material verification.
• Prefabrication of Hull panels, assemblies, and units to blocks about approved drawings.
• Co-ordination between different engineering and Quality Assurance sections for resolving engineering and other quality & interdisciplinary checks.
• Checking the plate fit-ups of assemblies and units before final welding.
• Involved with the erection of structures from the entire assembly to the final block stage.
• Checking proper alignment of units/blocks using water tube checks & plumb checks.
• Welding consumable Quality Control.
• Sorting out all documents, related to each project and verifying production documents.
• Review Inspection & test plans by international codes and Client Specification Review Project Weld drawing, weld, and NDT map and welding Procedure Specification
• Oversee various tests, including air leak tests, hydrostatic tests, vacuum tests, hydraulic oil flushing, structural load tests, and hose tests
• Well-versed in monitoring preheating and post-weld heat treatment for welding joints by WPS and codes, particularly for structural and high-pressure pipe welding
• Perform Surveillance during inspection to verify compliance with specified yard procedures including preheat, inter-pass temperature control, and post-heat requirements
• Liaise with NDT team for NDT activities and verify reports
• Prepare the final documentation to ensure compliance with specifications and contract requirements

Job Requirements

• Minimum 5 years of experience in relevant field
• Experience in any degree/diploma
• CSWIP 3.1 and NDT Level-II certification

• Location: Boon Lay
• $2300 - $2500
• 5.5 Days Alt - 8am to 5pm, 8am to 12pm
• Perm Role

Job Scope:

• Perform routine quality checks on raw materials, in-process products, and finished
  goods.
• Assist in monitoring production processes to maintain quality control and food safety
  guidelines.
• Assist in internal/ external and regulatory audits.
• Prepare and maintain relevant food safety records.
• Assist with maintaining quality documentation, ensuring all records are up-to-date and
  accurate.

Requirements:

• Diploma in Food Science / Technology or similar
• Min 1 year experience in QA/ QC role
• Singaporean Only

Kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

EA Reg. No: R1880058 | Dylan

We are looking for QA Tester/Test Lead to join one of the government agency in Singapore!

• Basic up to $7,600
• Working location: Pasir Panjang
• Exciting opportunity to work with a team of professionals to deliver high quality applications

Responsibilities:

• Establish quality assurance deliverables for stories in upcoming iterations/sprints, for functional and non-functional test areas
• Responsible for test strategy/plan, traceability matrix, test suite (test cases & scripts, test data) and test results analysis and reporting
• Work closely with development team to identify estimation of testing scope and timelines
• Confirm the validation and acceptance criteria with Business Analyst Team
• Responsible for creation, maintenance and conditioning of test data.
• Be an advocate for the role of testing within the SDLC and DevSecOps, be a champion for Quality
• Provide and maintain test documents which include test plan, test scripts (manual and/or automation), test summary report, defect logging and defect pattern analysis
• Managing the test team – assign tasks, set priorities and monitor progress of the test team. Provide guidance, support and training to team members as required

Requirements:

• Singaporean only
• At least 4-8 years of working experience in Software Manual Testing (Web Application)
• Experience in Agile development and testing methodologies
• Possess testing certifications will be an advantage (eg. CSTP, CTAL)
• Organised and meticulous in planning, managing and executing testing activities

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email [email protected].
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Liew Chien Hui - R2090138

ScienTec Consulting Pte Ltd - 11C5781

Posted Job Advert

Today, Lonza is a global leader in life sciences operating across five continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

Responsibilities:

• Support day-to-day Quality Assurance activities in accordance with approved SOPs / Policies for a multi-product, GxP contract manufacturing facility
• In depth awareness of entire process; identifying operational factors which influence the process
• A competent Reviewer and Approver of SOPs, protocols, reports or records
• Can trouble-shoot and able to weigh up all information and consideration in order to choose the optimum path to be taken
• Demonstrate ability to lead a small project and manage the deliverables effectively Develop good working relationships with internal & external customers
• Plan for future activities and coordinate with other departments to complete this
• Develop skills to be Qualified Trainer in area of expertise
• Able to participate actively or lead in deviation investigations, change controls and CAPA plans
• Able to lead, review and approve deviation investigations, change controls and CAPA plan as required
• Perform material release and qualification, joint inspection to identify material defect and review vendor’s investigation report as required
• Review executed batch records and logbooks and ensure that deviations are raised
• Provides Quality oversight for Operations document changes (e.g. MBRs, SOPs, Forms, Logbook, etc.)
• Provides QA oversight in any customer project related activities

Requirements:

• Bachelor's degree with 5-7 years’ experience in Quality Assurance in the Biopharmaceutical industry.
• Familiarity with Regulatory requirements and local Codes & Standards (e.g., FDA, EMEA, and ICHQ7)
• Fair knowledge and experience of the practical and theoretical requirement of quality management system in a GMP facility
• Good oral and written communication skills
• Team player, with strong focus on safety, quality and timelines
• Able to operate independently with minimum supervision for routine work within established policies and procedures and receives detailed instructions on new projects and assignments.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Job Responsibilities:

• Establish, implement and maintain effective Quality Management System (QMS) in compliance with the requirements established by the Company and relevant industry standards (e.g. API Q1 requirements).
• Establish and lead internal audit program covering all operations and functions to ensure adherence to QMS requirements, provide report on internal audit results, and follow-up audit results to ensure close out of corrective/ preventive actions.
• Lead and drive continuous improvement efforts in QMS.
• Lead root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely response to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Manage and supervise the daily operations of Quality Control.
• Supervision and management of QC resources – Inspectors, Quality Coordinator.
• Provide technical expertise and training to Inspectors and Quality Coordinator.
• Ensure proper control and maintenance of quality documents and records.
• Prepare Quality performance metrics and reports on a weekly and monthly basis.

Job Requirements:

• At least a Professional Certificate/NiTec, Bachelor Degree, Post Graduate Diploma, Professional Degree in Mechanical Engineering, Quality, or related.
• Good knowledge of ISO /API Q1 is preferred.
• Strong hands-on experience on quality inspection & measurement is preferred.
• Knowledge/certificate in NDT is preferred.
• Possess good interpersonal and planning skills.
• Minimum 2 years work experience in Quality Management System of manufacturing environment.
• Prefer having experiences in non-electronic industries such as raw material suppliers, metal cutting, oil & gas, mechanical , surface treatment/coating etc.

Need to have engineering knowledge, comprehension of technical documents. Excellent written and spoken communication skills • Possess troubleshooting skills in engineering works • Proven leadership skills with a large and diverse workforce o Be able to work in a fast-moving environment, under pressure and long working hours, when needed.

We are looking for an energetic, trustworthy, and self-starter candidate who could be handy in paperwork preparation and supervision at the worksite, overseeing projects, maintaining safety protocols, and implementing site procedures. Our ideal candidate is experienced, responsible, and team-focused.

Project Engineer Job Description

We are looking for a dedicated project engineer to assist with the scheduling, planning, forecasting, resourcing, and managing technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

To be a successful project engineer, you should have the ability to work with multiple discipline projects and demonstrate excellent project management and supervision skills. You should also have excellent organizational, time management, leadership, and decision-making skills.

Project Engineer Responsibilities:

Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

Formulating project parameters and assigning responsibilities to the most capable

employees and monitoring the project team.

Interacting with clients, interpreting their needs and requirements, and representing them in the field.

Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

Cooperating and communicating with the project manager and other project participants

and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

Reviewing the engineering tasks and initiating the necessary corrective actions.

Developing specifications for the project's needed equipment.

Creating frameworks to measure the project's metrics and data collection.

Establishing field test methods and methods for monitoring the quality of those tests.

Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

Degree in engineering or a related field.

Minimum 3 or more years' field and project experience.

Excellent computer literacy and knowledge of design and visualization software.

The ability to work with multiple discipline projects.

Excellent project management and supervision skills.

Excellent organizational, time management, leadership, and decision-making skills.

Strong written and verbal communication skills.

Knowledge of applicable codes, policies, standards, and best practices.

A Service Engineer’s responsibilities typically include installing, maintaining, and repairing machinery and equipment, ensuring optimal performance and customer satisfaction.

Job Description :

1. Equipment Installation: Assist in the installation and setup of various equipment at client sites.

2. Routine Maintenance: Perform scheduled maintenance checks on machinery and equipment to ensure optimal performance.

3. Troubleshooting: Diagnose and resolve technical issues promptly to minimize downtime.

4. Customer Support: Provide technical support to customers, address and resolve customer inquiries and complaints in a timely manner.

5. Quality Assurance: Ensure compliance with company quality standards and regulatory requirements during service operations. Adhere to all health and safety regulations and ensure compliance with industry standards.

Job Requirements :

• Diploma or degree in Mechanical Engineering, Electrical Engineering, or a related field.
• Minimum of 5 years of experience in crane service engineering or a related field.
• Familiar with hydraulic system & machinery electric system and understanding the hydraulic system theory.
• Basic knowledge of diagnosing defects and repair mechanical equipment such as heavy crawler crane, excavator or drilling rig, etc

Degree in Mechanical Engineering

Minimum 3 years M & E Experience

Experience in Fire Sprinkler System

Autocad Skills and Computer Skills

independent Self-motivated, hard working and able to work as a team

To assist Project Manager to liaise with clients and consultants on Projects

To co-ordinate sub-contract works