Total 57,105 Others/Any qc engineer job vacancies in Singapore

Job Responsibilities:

• To perform all repair and overhaul procedures of various in-house products.
• To assist senior engineers coordinating with customers to carry out site installation, commissioning of semiconductor equipment.
• To provide technical consultancy, problem analysis/diagnosis of users' technical problems.
• To prepare service reports.
• Any other job duties as assigned by superior.

Requirements:

• Education: Minimum Professional Certificate/ NiTEC, Diploma in Electronics / Mechanical Engineering or equivalent.
• Entry-level candidates are welcome, training will be provided.

Location: Woodlands

Working Hours: 9 am to 6 pm (Mon-Fri)

Benefits:

• Annual Increment
• AWS and Performance Bonus

Job Description:

• Operation and Maintenance of Electrical systems
• Continuous performance monitoring and ensuring highest uptime
• Project coordination for new equipment installations
• Troubleshooting of system abnormalities and provide technical solution
• Initiate continuous improvement projects
• Manage external contractor and vendors and maintaining safety standards

Job Requirement

• Degree in Electrical Engineering or related fields with min 3 years' experience
• Experience in operation and maintenance of Transformers, LV, MV switch boards, UPS, Motors, Frequency convertors and power distribution.
• Experience in project installation of electrical distribution
• Able to study protection circuits, single line drawings and control circuits.
• Knowledge of low voltage systems like Fire protection, CCTV, PA and network systems

Key Roles and Responsibilities:

• Deliver technical solutions to clients and take responsibility for the standards of work, project sign off and client satisfaction.
• Provide client support, assisting with troubleshooting and design, configuration and escalated problem management.
• Act as key project team members charged with the analysis of client and technical requirements, specifications development, solution design and development, and in some environments may consult on testing and deployment processes.
• Expected to be technology leads for specific technologies and to use their deep knowledge of these technologies to propose enhancements.
• Interact with clients on site to meet complex requirements of a solution.
• Escalate unresolved problems and issues to the relevant third parties.
• Respond to escalated client requests and support client applications to a first line resolution.
• Escalate complex problems to the relevant third parties.
• Write reports and proposals and complete and maintain project documentation.
• Assist with the documentation of standard operating procedures relating to installations and fixes.
• Act as coach and mentor to more junior Implementation Engineers and Technicians.
• Assume responsibility for the co-ordination of the activities of the Engineers, in line with performance targets.
• May be required to serve periodically on the customer service desk, providing third line telephonic, remote and on-site support and problem management.
• Included in higher complexity design work, with input to the design expected.
• Expected to take ownership of relevant technologies according to domain or specialization.
• Knowledge, Skills, and Attributes:
• Good understanding and appreciation of technical design and business principles
• Demonstrates project management and administration ability.
• Good project skills which are demonstrated in the execution of installations and other assignments.
• Demonstrate customer engagement skills.
• Demonstrate relevant domain specialist knowledge.
• Good verbal communication skills
• Client focused and displayed a proactive approach to solving problems.
• Ability to work under pressure.
• Ability to coach, mentor and provide guidance to team members.
• Good understanding of project management principles

Academic Qualifications and Certifications:

• Computer Science / Information Technology Degree or equivalent together with specialized training in new technologies and legacy systems or equivalent
• CCNP (SDN, ACI, SDA, SD-WAN, DNAC), Meraki
• CCNP (Wireless, Meraki)
• ACMA, ACMP, ACCA, ACCP
• ACFE, ACSE
• JNCIA, JUNCIP-ENT, JCIA-MistAI
• CCSE, PCNSE, NSE4
• SolarWinds NPM, NCM
• CCIE – highly advantageous
• F5 Certified Technical Specialist (30X track) – highly advantageous
• Nokia GPON – highly advantageous
• Project management certification

Required Experience:

• At least 5 – 8 years' professional technical experience related to software development, systems design and deployment, or networking and infrastructure within a large scale (preferably multi- national) technology service environment.
• Experience in designing and building complex LAN and large WAN.
• Expertise in routing/switching technology, including BGP, OSPF, etc.
• Experience in designing and building complex data center network with Software Defined Networking (SDN) solutions such as SD-WAN, Cisco ACI, VMware NSX or any OpenFlow protocol.
• Experience in designing and building complex WLAN – Cisco/Meraki/ Aruba/ Alcatel/ Juniper Mist
• Extensive in Network Access Control – ISE/ Aruba ClearPass
• Extensive hands-on LAN switches: Cisco N9K, Alcatel Omni Switches, Juniper EX switches
• Extensive hands-on Wireless site survey; Post & Pre heatmap generation
• Experience in designing and building complex campus network with Software Defined Access (SDA) solutions from Cisco or any other SDA vendors.
• Experience in network automation via scripting (e.g., Python, Ruby) or tools (e.g. Ansible, Algosec, Chef)
• Experience in designing and building network security (Checkpoint, Palo Alto, FortiGate, Cisco firewall, IDS/IPS, VPN, SSL), Content Networking (cache, load balancer, F5, etc.)
• Experience in project management methodologies

Who You Are

You are passionate about the Airline Crew and Ops business. You see yourself contributing in a team and

believe a team is more than the sum of its team members. You enjoy communicating with different

stakeholders as part of the project delivery, being self-driven and support the goals of the entire team.

You like to challenge yourself and others, actively speaking out, seeking answers and listening. You like

to work in a flat hierarchy structure. You are adaptive, thrive in a dynamic environment, and see change

as something positive

About Us

One third of pilots and cabin crew worldwide are flying with schedules produced by Jeppesen's

innovative solutions. One million pilots use our navigation products, and every day some 70,000 routes

around the world are planned with the help of Jeppesen solutions.

At Jeppesen, a subsidiary of Boeing, you will work with breakthrough technology, exciting customers

and fantastic colleagues from around the world. Our products comprise best-of-breed solutions that

break down silos, enable more effective workflow, and amplify cross-functional collaboration within the

airline. Our culture is characterized by creativity, professionalism and self-organization within an open,

diverse and flexible work environment.

We believe that our employees must be allowed to dream big and have fun for us to remain one of the

top companies in the industry. We encourage and enable our employees to continuously develop their

professional skillset and explore new areas. We are focusing on continuous improvements and

innovations to bring more value to our clients in the future.

About The Position

The Digital Services and Support (DSS) Implementation department is responsible for development and

delivery of our Crew and Ops management products to airline customers. We are looking for Systems

Analyst/Software Engineer to join our department based in Singapore. This is an opportunity to be part

of an enthusiastic team that solve some of the most challenging airline’s planning and operational

problems.

In this position, you will work closely with our clients and develop applications to meet their business

needs. We are looking for applicants with strong communication skills who can drive technical solutions

decision in a confident way. The candidate should be good at dealing with technical challenges as well as

handling client expectations and building long-term customer relations.

Your responsibilities will include requirement gathering, software customization, optimization

modelling, testing and continuous improvement on the value proposition of our products.

All positions will be based in Singapore and the candidate needs to be able to travel to our customers

from time to time as part of the job, mainly within APAC region. We support hybrid working model.

Basic Qualifications

• Bachelor Degree or higher in Computer Science/Computer Engineering/Electrical and Electronics Engineering/Information Systems or other relevant major with equivalent experience
• Comfortable working in Unix / Linux environment
• Adept in Python or similar languages
• Strong analytical and problem-solving skills
• Strong verbal and written communication skills
• Thrive working in a self-organized team structure

Preferred Qualifications

• Experience with Unix / Linux system administration, shell scripting, database, GitLab, CI/CD
• Experience working within a Scrum team or in a similar Agile project setup
• Airline Crew/Ops Management knowledge
• Jeppesen Crew/Ops products customization experience

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate

area or relocate at their own expense.

Other Job-related Information:

This requisition is for a locally hired position. Benefits and pay are determined at the local level and are

not on Boeing US-based payroll.

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules
• Check and ensure all the temporary work is carried out as per PE design

Requirements

• Degree in Civil Engineering or equivalent
• Min 2 to 3 Years Relevant Work Experience (C&S RC / building work)
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Senior Software Engineer (Java)

Internal Code: A24108

This is a 6-month-contract role.

What will you do?

• We are looking for software developers that are open and enthusiastic about end to end software delivery and trying out new technologies.
• Be part of a cross-functional development team that values quality, automation and user experience of the software we deliver.
• Mainly responsible for software design and development of web frontend and backend applications
• Write automated functional and unit testing for the code you write
• Develop backend APIs & databases supporting the applications
• Design and develop applications leveraging cloud technologies
• Assist DevOps Engineer on build and release automation
• Work closely with fellow developers in pair programming and code review
• Work closely with Business Analyst, Quality Engineer, User Interface/User Experience Designers to deliver features

What are we looking for?

• Experience in server-side web application development using Java, Spring Boot
• Experience on working on CI/CD pipeline
• Experience of leveraging on cloud platforms such as Amazon AWS, Azure or Google Cloud Platform (GCP)
• Familiar with Javascript unit testing frameworks such as Jest or Mocha
• Familiar with Agile and Continuous Integration and Delivery Practices
• Familiar with version control using Git
• Open to work on other platforms because we want a cross-functional team
• Familiarity with building reusable web components will be an advantage
• Familiarity on how search engines components work (crawl, index, search)
• Familiar with practices such as Test-Driven Development and Behavior-Driven Development
• Familiar with Docker
• Collaborative team player with good interpersonal and presentation skills
• Minimum of 3-5 years of software development experience
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is a plus.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

We are now seeking Field Service Engineers to perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation. On a worldwide basis, our engineers represent the company while servicing, troubleshooting and supervising repair of NOV equipment. They shall be proficient to make necessary repairs and minor corrections to systems as required and provide a high level of customer service for product maintenance and in-field repair.

Responsibilities:

• Performing on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation.
• Responding to requests for emergency repairs and services to troubleshoot equipment.
• Providing technical instruction and assistance to customer representatives regarding installation, operation, calibration, repair, and maintenance at customer's sites, developing and further expand technical knowledge and expertise, currently recognized industry standards for engineering ability.
• Maintaining knowledge of applicable product line warranty and accomplish effective warranty administration.
• Planning, preparing and/or instructing both internal and external training programs as required, to impart and perpetuate field engineering and/or product knowledge in area of specialization.
• Providing leadership and technical direction to skilled labor performing work on customer sites.
• Maintaining strong safety mindset to assure the executed work reflects the technical requirements within NOV safety standards
• Preparing timely and accurate technical reports for customer records and a reference for future outages.

Job Requirements/ Qualification:

• Bachelor's degree in related field or equivalent combination of education and experience.
• 5+ years’ experience in a related field is most welcome.

Technical Competencies:

• MS Office products (Word, Excel, Powerpoint, Project)
• Ability to understand hydraulic schematics. It will be advantageous if the candidate is well versed in hydraulic / mechanical systems and also have an in-depth knowledge of the of the Drilling Equipment designed by NOV.
• Preferred working experience in Reliability, Availability, Maintenance and Safety (RAMS) and application of FEMCAs (Failure Mode, Effects, and Criticality Analysis) strategies for predictive maintenance (PM) and corrective maintenance optimization.

Job Description:

• Design, develop, and maintain scalable data pipelines using Spark and Scala to process large datasets.
• Implement and manage Elasticsearch clusters for efficient data retrieval and analysis.
• Collaborate with data scientists and analysts to understand data requirements and provide support for analytical solutions.
• Utilize Quantexa for entity resolution and network analytics to enhance data quality and insights.
• Monitor and optimize data workflows for performance, reliability, and scalability.
• Document data processes and ensure best practices in data engineering are followed.
• Participate in code reviews and contribute to the continuous improvement of our data engineering practices.
• Skills:Data analytics, Quantexa,Spark,Scala,Elastic search,AWS,Azure,GCP, Analytics.

Requirements:

• Proven experience as a Data Engineer, with a strong focus on Spark and Scala.
• Proficiency in Elasticsearch for search and analytics applications.
• Familiarity with Quantexa or similar tools for data enrichment and entity resolution.
• Experience with cloud platforms (AWS, Azure, GCP) is a plus.
• Strong SQL skills and experience with relational databases.

Job Purpose

1. Overall in charge for all Planned Preventive Maintenance as well as Corrective

Maintenance works related to Track, Track Foundation, Trackbed and 3rd Rail System in

SMRT

2. Ensure all Line Maintenance works (PM & CM) are complied with approved quality

procedure, work instruction ( ISO 9002 Standard)

3. To achieve and maintain Key Performance Indicator set by Permanent Way Management.

Responsibilities

1. Responsible for all staff’s welfare, attendance, disciplinary matters, safety and maintenance

work matters.

2. To submit weekly maintenance programme to LM.

3. To prepare monthly report on team man-hours

4. To upkeep and maintain the office.

5. To coordinate with Chief Controller on all fault reports and arrange for proper deployment

to execute the work.

6. To plan out all Correction & Preventive Maintenance works and ensure it is carried out

promptly and comply to approved quality procedure and WIs.

7. To check, compile Daily Work Record submit by staff.

8. To conduct and brief staff on Toolbox briefing

9. To carry out project implementation as and when assigned by supervisor.

10. To perform PIC & PM roles.

11. To attend to Emergency work when call by Supervisor.

12. To assist LM on Track Quality report by :

- Reviewing and verify patrol reports.

- Assist with fault card

- Monitor and priorities assessment of track defect and quality.

- Input work request into Pway CM list.

- Monitor & coordinate work done in Pway CM list.

Job Requirements

1. Higher NITEC / NITEC / NTC preferably in Mechanical Engineering.

2. Preferably 3 years relevant working experience in technical work. Fresh graduates are welcome to apply.

Skills

1. Ability to work under pressure.

2. Self-motivated, resourceful and organized.

3. Able to work independently.

4. Possess strong interpersonal & communication skills.

5. Ability to communicate effectively in English, and work safely in a team with reference to the respective

6. Risk Assessments.

7. Experienced and confident in managing contractors.

Job Purpose

The Assistant Engineer’s job scope shall include leading a team of Technical Officer(s) to perform Preventive Maintenance (PM), Corrective Maintenance (CM), Overhaul (OH) and Engineering Support (ES) on all SMRT Thomson-East Coast Line (STEL) Trains, Depot and Workshop equipment so as to provide a safe, reliable and comfortable journey for our commuters.

Responsibilities

• Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.
• Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.
• Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.
• Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.
• Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.
• Ensure spares, tools and equipment used are in good condition and calibrated if necessary.
• Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.
• Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System
• Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.
• Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.
• Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.
• To support the group during incidents, accidents and emergencies.
• Ensure excellent housekeeping are maintained within all work areas.
• Maintain a high level of work discipline and standards.
• Perform any other task as assigned.

Qualifications & Work Experience

• Diploma in Electrical, Mechanical or Mechatronics Technology/ Engineering from a recognized institution.
• Preferably 5 year’s relevant experience in the railway environment.

Responsibilities:

• Work in conjunction with cross-functional teams to enhance service delivery and troubleshoot any OTN-related issues.
• Troubleshooting of Optical devices such as Ciena 6500 and Infinera GX40 in Hut, PoPs and Datacenter.
• Handle dark fiber maintenance and any other queries raised by OSP
• Day-to-day activities involve working on multiple vendor troubleshooting various software and hardware issues
• Support team in handling optical devices for any incidents such as hardware failure, power outage, major fiber event and etc.
• Coordinate with smart hands and optical equipment manufacturers to resolve issues and restore service.
• Work with ISP/vendors on fixing any issues related to the network, such as RMA process and fiber repair.
• Knowledgeable on performing and reading the analysis/outcome of the OTDR testing.
• Monitor Optical Long Haul and Metro networks and troubleshoot a variety of issues in a timely manner.Perform fault isolation based on the troubleshooting outcome.
• Partner with and escalate to, various internal teams in pursuant of restoring service and limiting impact.Manage and escalate critical events while communicating clearly and concisely.
• Document and optimize operational processes and procedures.Contribute to the creation of monitors, alerts, dashboards and metrics to drive continuous improvements.
• Document and follow RMA processes and procedures for all relevant vendors.
• Work cross-functionally and cross-regionally with other optical and network operational support teams. Some weekend work may be required.

Required Qualifications/Skills:

• Bachelor’s degree (B.S/B.A) from four-college or university and 2 to 5 years’ related experience and/or training; or equivalent combination of education and experience
• Builds productive internal and external working relationships.
• Understanding of fiber-optic technology including cable types, connector types, optic types, patch panels, and optical transport technologies
• Strong communication skills, including the ability to work with service providers, colocation facilities, and ISPs around the world
• Working knowledge of ROADM, coherent transponders and long-haul operation optical networks
• Understanding of Optical layer (L0/L1) traffic reliability configurations using Protection and/or Restoration schemes including pros/cons
• Knowledge on DWDM device, its component and familiar with the CLI command.
• Knowledge of Dark fiber testing and light level testing.
• Knowledge of Network and Networking protocols.

Responsibilities:

• Supervise and monitor construction progress, including planning, implementation, and scheduling in accordance with the work programme.
• Collaborate with Professional Engineers regarding Temporary works and with consultants (QPS) to address technical issues, while also coordinating subcontractor activities.
• Address engineering and technical concerns and provide guidance to supervisors to ensure construction proceeds on schedule, adheres to quality standards, and any issues are resolved promptly.
• Conduct site inspections, prepare reports and method statements as needed, and closely manage workers to maintain safety and cleanliness at the site.
• Oversee ongoing site activities.

Requirements:

• Degree in Civil Engineering or equivalent
• Min 1-2 years of experience. For candidates with 3-5 years of experience will be considered Senior level.
• No experience welcome.

Kindly email your resume in a comprehensive Word format to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Please be informed that by applying for the advertised position, the candidate is considered to have given their consent for us to collect, utilize, or disclose their personal information for the purposes related to the services we provide.

Jacqueline Goh

EA License Number: 22C1430

Registration Number: R1326664

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope

• Responsible for M&E services proposals for building and infrastructure projects encompassing conducting feasibility studies, resolution of technical issues, conceptual design, writing of specifications, budgeting, programming, procurement, design review, safety and quality assurance.

Key Roles and Responsibilities

• Working with stakeholders, service providers, contractors and consultants, reviewing the providing value engineering solutions with the objective of achieving quality, compliance and value for money
• Support tender and execution of projects
• Review of sub-contractors’ proposal and design
• Work with respective sub-contractors (mechanical, electrical, plumbing, aircon, fire protection etc) to produce shop drawings
• Integrate shop drawings into BIM system for feasibility review
• Familiar with Data Center Construction
• Familiar with BCA Green Mark Energy Efficiency Platinum
• Coordinate site activities during construction
• Liaise with clients, consultants, sub-contractors etc
• Ensure the smooth completion of the project
• Any other ad-hoc matters assigned by Management

Qualification, Skills and Experience

• A recognized Degree/ Diploma in Electrical/ Mechanical Engineering or its equivalent
• Minimum 4 years of relevant experience in construction industry
• Familiar with API 650 code will be an added advantage
• Candidate should carry a proactive attitude
• Only Singaporeans

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for Validation Engineer to join us on a permanent basis to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Develop the overall project C&Q plan/schedule, estimate the resources required, identify key roles and responsibilities and plan for C&Q staff on-boarding.
• Lead the generation of C&Q SOPs and validation documentation which include Validation Master Plan (VMP), System Level Impact Assessment (SLIA), User Requirement Specification (URS), Qualification Protocols (DQ, IQ and OQ) and traceability matrix for the project.
• Use Process Automation System for the commissioning and validation of process equipment.
• Interface with client personnel and outside vendors when necessary.
• Manage the overall CQ&V of facilities, utilities and equipment.
• Manage all facets of assigned validation projects while maintaining strong communication with client representatives on project status and assistance needed.
• Knowledge on Kneat is preferred.

We are currently looking for candidates in Singapore. Candidates must work some EU hours for meetings

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

SDLC and Runtime focuses on delivering engineer-first, scalable platforms for job scheduling, Compute-as-a-Service, file transfer, firmwide software distribution and software development, including CI/CD (Gitlab ecosystem).

• Software Development Life Cycle (SDLC) is a suite of products that provides build and deploy tooling for Engineers in the firm. It provides a modern, secure and highly available plant that facilitates source control, code review, build, test and production activation.
• Distributed Scheduling (Runtime) offers scalable, highly available and efficient platforms and services for job scheduling, grid computing, Compute-as-a-Service, file transfer and software distribution across the firm.

Primary customer base for SDLC and Runtime are Global Banking & Markets (GBM) and Private Wealth Management (PWM). Also significant customer usage in the Infrastructure Group (Core Engineering).

Our aim is to innovate and drive technology solutions that will impact the bottom line for the firm. By joining us, you will be part of a diverse global technical team focusing on solving critical business problems. Work on a multi-year initiative to build out our strategic, highly scalable and resilient SDLC platform using cutting-edge technologies and streamlining processes for our engineers across the firm.

RESPONSIBILITIES AND QUALIFICATIONS

What you will do

• Own technical operations for systems that manage hundreds of thousands of CPU cores
• Build observability for new deployments to ensure robustness from day one, as well as mature deployments to identify and implement improvements
• Design, develop, and deploy cloud-based replacements for legacy bare-metal installations
• Dig into issues with block devices, file descriptors, and packet loss; lead real-time outage investigations and present postmortems to senior management

What you have

• Comfort in a programming language: we're primarily Python 3 and Go -- with some Scala and Erlang, interest in Rust -- but believe in the best tool for the job and care about analytical thinking more than specific syntax familiarity
• Tales of tcpdump and strace: our modern code leverages Jaeger/OpenTracing to ease debugging, but first-principles Linux systems and networking knowledge is a must
• Interest in SLOs/SLIs: continually executing an application's "typical user journey" to store health metrics in a time-series database is invaluable for us and has support from the C-suite
• Curiosity: no hesitation before consulting the source or ssh'ing to an unfamiliar machine (or a thousand) when documentation is insufficient or charts don't make sense; "if a human built this, a human can figure it out"
• Pragmatism: desire for long-term strategic ideals paired with awareness of when it's appropriate for immediate-term fixes to add tech debt

ABOUT GOLDMAN SACHS

At Goldman Sachs, we commit our people, capital and ideas to help our clients, shareholders and the communities we serve to grow. Founded in 1869, we are a leading global investment banking, securities and investment management firm. Headquartered in New York, we maintain offices around the world.

We believe who you are makes you better at what you do. We're committed to fostering and advancing diversity and inclusion in our own workplace and beyond by ensuring every individual within our firm has a number of opportunities to grow professionally and personally, from our training and development opportunities and firmwide networks to benefits, wellness and personal finance offerings and mindfulness programs. Learn more about our culture, benefits, and people at GS.com/careers.

We’re committed to finding reasonable accommodations for candidates with special needs or disabilities during our recruiting process. Learn more: https://www.goldmansachs.com/careers/footer/disability-statement.html

© The Goldman Sachs Group, Inc., 2024. All rights reserved.

Goldman Sachs is an equal employment/affirmative action employer Female/Minority/Disability/Veteran/Sexual Orientation/Gender Identity

Site Engineer x 3 (No experience required, office hrs)

(Gov project, stable role)

Singaporean Only, security clearance required

Salary range:

• Basic Salary $2600 - $3500 + Site Allowance + Standby Allowance + Bonus + Other Benefits

Responsibilities:

• Perform Preventive & Corrective maintenance work involving fault troubleshooting, diagnosis & replacement of equipment/ component at permanent sites
• Perform testing of equipment
• Provide troubleshooting to technical problem on communication system

Requirements:

• Higher Nitec/ Diploma in Electrical/Electronics, Communications/ Computer Engineering/ System Engineering or InfoComm Technology
• Training will be provided
• Able to perform standby duties (based on roster)
• Possess Class 3/3A Licence

Additional Information:

• Stable role, Government Project (Singaporean Only)
• Working hours: Office Hours (Mon – Fri)
• Location: Near Khatib MRT

Interested applicants simply email your resume to: [email protected]

We regret to inform that only shortlisted applicants will be notified.

• Review and approve shop drawings for RC and temporary works (e.g., struts, walers), and collaborate with consultants, the construction team, and authorities.
• In charge of structural design of temporary works, including scaffolding, falsework, and formwork.
• Take the lead or assist the project department in addressing design-related issues, while managing and resolving production, quality, design, engineering, and scheduling challenges.

Requirements:

• Degree in Civil Engineering or equivalent.
• At least 7 years of infrastructure project experience in structural design.
• Proficient in STADD, AutoCAD, and Microstation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gehbbtfJ (EA: 94C3609/ R1219669)

• Permanent role with an established company
• Exposure to latest technology

About the company

Our Client is one of the most established company with the high tech manufacturing industry. They have a well-established presence of more than 50 years with a global footprint of more than 20 countries. With rapid expansion plan, they are now looking for a new MES System Analyst (Manufacturing Execution System) / CIM Analyst / Engineer – PROMIS to be a part of their team here in the regional headquarters.

About the job

You will be responsible for:

• Oversee, support, and maintain the MES model, including products, routes, operations, and lot movements.
• Design, develop, maintain, and continuously improve assigned Computer Integrated Manufacturing (CIM) applications and components.
• Provide 24/7 Level 2 & 3 support to ensure smooth operation of production lines.
• Collect requirements, design, develop, and deploy new versions of CIM applications.
• Document requirements and manage enhancements in the assigned area.
• Plan, coordinate, and deliver training for assigned applications.
• Work with other departments to enhance productivity, reduce errors and costs, and contribute to improvement projects as needed.

skills and experience required

As a successful applicant, you will have at least 3 years of experience in MES.

Whats on offer

This is an excellent opportunity to join an established MNC with high job stability.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gehbbtfJ

We are looking for exceptionally smart people with strong development skills and an avid interest in web/mobile development. You should be able to learn quickly and work independently - we'll help you as best as we can, but you must be tenacious and resourceful enough to figure out things you don't know how to do.

Requirements

• Students will be required to commit full time 40 hours per week for at least 6 months.
• Solid programming ability in at least one language.
• Clear and precise written communication. A large part of our team works remotely and it's vital that you are able to document ideas, progress and problems with clarity so everyone can work asynchronously.
• You must be happy to work independently (remote welcome) and be able to structure timelines, take ownership and responsibility and communicate clearly.

Any experience in the one or more of the following is a definite plus:

• Worked on non-trivial Javascript applications.
• VueJS experience.
• Development experience in C# or Python.

Responsibilities

• Build features and fix bugs in applications being developed (this would be the main responsibility –interns will be assigned a project to work on and will focus on development of features and fix bugs that are project related).
• Take part in daily standups and present demos of work done.
• Assist the senior engineers in building proof-of-concepts to validate assumptions during system architecture.
• Assist senior engineers in writing performance test scripts and investigating and debugging performance bottlenecks.

Learning Outcomes

• Participate in daily stand-up meetings as part of the development team and understand agile development methodology.
• Learn to write efficient, clean and maintainable code (code reviews are routinely conducted with guidance from senior engineers).
• Understand what it takes to move from writing code to a system that’s deployed with real-world users – you’ll get a close look at the rigour and detail that goes into code reviews, architecture, performance, security, testing and deployments.
• Gain experience in applying existing academic knowledge in solving real-world problems.
• If you've built something in the past, do let us know. Github and/or StackOverflow profiles are welcome.

You'll get to work in a fast-paced environment, with a great team of full-stack engineers who have a lot of experience in building large software applications from scratch.

To maximize learning, interns will need to be able to and willing to commit full-time throughout the internship period. This commitment includes not having concurrent class schedules or other major conflicting commitments during the internship period, to ensure their active participation and engagement in our internship program.

To expedite the application process, we kindly request all interested candidates to apply directly through our official career portal: https://thesoftwarepractice.freshteam.com/jobs/mNA1RJEckJ9N/software-development-engineer-intern-jan-jun-2025?ft_source=MyCareersFuture_3000241553&ft_medium=Free%20Job%20Boards_3000023934

We seek your understanding that only shortlisted candidates will be notified.

Job Description

• Involve in the project or maintenance services related with General Security Systems, Alarms Systems, CCTV Systems , Access control systems and Server & Network infrastructure and whenever required.

• Perform Installation, Implementation, Configuration and testing of system/storage equipment & setup

• Troubleshoot problems encountered on site

• Work closely with Project/Maintenance Managers in planning the implementation tasks

• Maintain accurate and consistent set of work instructions service delivery processes.

Job Requirements

• Candidate must possess at least a Professional Certificate/Nitec, Diploma, Advanced/Higher/Graduate Diploma, Engineering (Electrical/Electronic/Information Technology ) or equivalent

• Preferrable with knowledge of networking and IP/TCP protocol

• In-depth knowledge in CCTV, Access Control and System Server etc.

• Hands-on experience in security-related tasks such as OS tightening, patching and updating, virus scanning will be an added advantage.

• IT Certification in windows system & storage, network, database, virtualization, cloud technologies will be an added advantage

• Good communication skills and positive working attitude.

• Candidate must possess a Class 3 driving license

• Candidate must be able to work on weekends and perform standby duties.

Interested applicants can email to [email protected]

EA Personnel Name: Dominic Goh
EA Personnel No: R1103353
EA License No: 14C7135

Salary: up to $4500

Working Days & Hours: 12 hour shifts (2-2-3)

Location: Tuas (islandwide pickup)

Job Description:

• Support the shift operation in all activities, ensuring that it is meets all environmental, health and safety regulations.
• Support the STS in ensuring that all operation and maintenance activities are in compliance to the safety procedures for Lock out/Tag out, energy control procedures, line breaking activities, confine space entry, work at height, hot and cold work permitting.
• Ensure that the shop floor is in a constant state of safety and quality regulatory compliance and inspection ready
• Perform all production, pre MI and post MI activities to ensure manufacturing attainment is achieved, assist the STS in the deployment of resources based on criticality and priority.
• Assign operation task according to Manufacturing Standard Work (MSW) and Operation Standard Work (OSW)
• Participate in all troubleshooting activities in processing issues, deviations and coordinating with other functions when require immediate and preventive actions.
• Participate in all investigation, report and troubleshoot findings on both EHS and quality related issues observed during manufacturing or during batch record review.
• Participate in Continuous Improvement (CI) activities, contribute ideas and perform Plan, Do, Check, Action (PDCA) cycle
• Support the STS in the development of risk assessment, creation of job safety assessment and participate in HAZOP when required.
• Develop Standard Operating Procedures as part of change control and perform periodic review.
• Assist in all commissioning, qualification and validation activities as necessary.
• Participate as a member of the emergency response team (ERT) when necessary.
• Accountable for:
• Safe operation of plant and equipment
• Safety compliance
• cGMP, GDP and SOP compliance
• Meeting production plan
• Housekeeping of plant area

Job Requirements: Min Degree in Chemical Engineering w min relevant internship experience in pharma manufacturing

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Responsibilities:

* Assist in the installation, calibration, and commissioning of medical equipment.

* Perform routine inspections, preventive maintenance, and repairs on medical equipment.

* Troubleshoot equipment malfunctions and provide timely resolutions.

* Maintain accurate documentation of equipment maintenance and repair activities.

* Adhere to all safety protocols and regulations.

* Any other duties assigned from time to time

Requirements:

* Diploma in Electronic / Electrical / Mechanical Engineering or a related field.

* Prior experience in a similar role is preferred but not mandatory.

* Strong problem-solving and troubleshooting abilities.

* Strong communication and interpersonal skills.

Interested applicants, please email your updated CV to [email protected] or WA 97527630 for more information.

We regret to inform that only shortlisted candidates will be contacted.

EA Personnel No: R23116144

EA Personnel Name: Lim Ruo Yi, Rachel

Company Registration Number: Recruit Express Pte Ltd (99C4599)

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD