Total 25,929 Full-time qc engineer job vacancies in Singapore

• Supervise testing and commissioning of electrical equipment on-site and manage the review and submission of site acceptance test reports.
• Review and interpret Single Line Diagrams and Electrical Schematic Drawings.
• Support electrical equipment installation inspections to ensure compliance with standards.
• Participate in site activities and meetings with clients and contractors.

Requirements:

• Diploma in Electrical Engineering.
• At least 3 years of site installation, testing, commissioning and maintenance testing experience in Low/Medium Voltage Electrical Equipment.
• Possess initiative and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Analyse network traffic patterns across identified routes.
• Collect specific measurements across identified routes for analysis.
• Conduct a network infrastructure analysis.
• Conduct threat assessment matrix on network.
• Configure Authentication, Authorisation and Accounting (AAA) services to support remote access protocols based on security requirements.
• Configure a network addressing system.
• Configure hosts and workstations to use IP addresses either manually or through automatic allocation of addresses.
• Configure network devices to provide secure failover and redundancy.
• Debug networking issues to maintain wireless connection.
• Escalate network performance issues to relevant personnel.
• Evaluate user requirements and recommend network protocol services.
• Identify the network components that are required to be installed.
• Install and configure access point to provide wireless access to network.
• Install and configure the components.
• Install firewall appliance for attack guards and intrusion detection.
• Monitor wireless network performance using diagnostic tools.
• Operate network monitoring tools to monitor network performance against thresholds and Quality of Service (QoS).
• Plan control methods for the network for user access management.
• Review network traffic problems with relevant parties for resolution.
• Test the overall network to verify that it meets the agreed requirements.

Job Requirements:

• Diploma or University Degree holder
• Cisco Certificate
• Knowledge in routing, switching, SD-WAN, and vendor technologies (Cisco, Fortinet, etc.)
• Knowledge of Server Architecture such as SANs, Citrix, AD;
• Knowledge in Microsoft server applications, Microsoft Azure Platform as a Service and Microsoft Azure Infrastructure as a Service
• Any relevant professional qualifications are considered an advantage

Job Description & Requirements

Role: Desktop Engineer - End User Computing (EUC)

Work Location: Woodlands & Yishun

Job Description:

Shall provide daily on-site DESKTOP management and support services (“DESKTOP Support Services”) for end-users’ End UserComputing Devices (DESKTOP) which are used in the Customer’s environment with the Customer’s approval. The general scope of Desktop Support Services shall minimally include:

(a) Image build management;

(b) Administration and configuration;

(c) End-user account management;

(d) End-user device hardening and lockdown;

(e) Trouble-shooting and problem resolution; and

(f) End-user briefings & awareness service.

Shall minimally support the following types of DESKTOP:

(a) Desktops;

(b) Notebooks;

(c) Mobile Devices (e.g. iPad, iPhone or equivalent);

(d) Video Conferencing Devices;

(e) IP Telephones;

(f) Printers, including multi-function devices (i.e. printers, scanners and fax devices); and

(g) Other peripherals (e.g. external hard drives, mouse, smart-card readers, monitors, docking stations).

Shall minimally support the following operating systems:

· Windows 7 and later versions of Windows;

· Apple iOS 9.x or later versions; and

· Android OS 5.x or later versions.

Minimum Requirement:

The Level 1 Desktop Support Engineer meet the following requirements:

(a) Minimum one (1) year of DESKTOP Support, ICT End User Computing or Service Desk Agent experience;

(b) Ability to perform the daily DESKTOP Support operations with minimum supervision;

(c) Possess technical skills in supporting existing and new computing devices such as desktops, notebooks and mobile devices;

(d) Possess knowledge in IT networking and LAN to troubleshoot computer problems; and

(e) Possess at least one (1) of the following certifications:

· Microsoft Certified Solution Associate (MCSA) Win7/Win8 or equivalent;

· (ii) Microsoft Certified Technology Specialist (MCTS) in any discipline or equivalent; or

· (iii) CompTIA A+ 220-801/ 220-802, CompTIA PDI+ or equivalent.

A quantity surveyor may work for either the client, the contractor or sub-con, working in an office or on site. They are involved in a project from the start, preparing estimates and costs of the work.

When the project is in progress, quantity surveyors keep track of any variations to the contract that may affect costs and create reports to show profitability.

Aside from Quantity Surveyor, he or she will also act as project engineer wherein will take charge of the suprvising the project, adhere to construction procedures, coordinate all work schedule with the main con and liase with project manager and archi coordinator.

He or She should monitor and ensure that the work progress is within project schedules and manage the project independently as well as lead and motivate team.

Estimation of quantities, preparing BOQ, BBS as per drawing.

• Coordinating with Design & Construction team.

• Review engineering drawing and specifications and ensure the correctness of transfer of drawing details to ground, Checking all centering and reinforcement works.

• Physical measurement of quantities and tracking the productivity.

• Ensuring timely resource availability.

• Undertaking cost analysis for repair and alteration done by customer in project work.

• Evaluating completed work and arranging payments

• Ensure quality of structure, works as per drawing and specifications & ensure no rework

• Analyzing outcomes and writing detailed progress reports.

• Preparation of Daily, Weekly and Monthly reports and submitting it to the Management

1. JOB DESCRIPTION

Job Title

Sales Engineer

Occupation

Sales & Marketing Engineer

Job Description & Requirements

Job Description:

We are seeking a highly motivated and skilled Mechanical Sales Engineer to join our team. As a Mechanical Sales Engineer, you will be responsible for driving sales and promoting our mechanical products and solutions to customers in Singapore. Your primary focus will be on developing new business opportunities, managing customer relationships, and achieving sales targets.

Responsibilities:

1. Develop and implement effective sales strategies to promote mechanical products and solutions.
2. Identify and target potential customers, including conducting market analysis and research.
3. Build and maintain strong relationships with existing and new customers, ensuring customer satisfaction.
4. Collaborate with the engineering team to provide technical support and product knowledge to customers.
5. Prepare and deliver professional sales presentations and demonstrations to potential clients.
6. Negotiate and close sales deals, ensuring profitable business growth.
7. Monitor market trends and competitor activities to identify new business opportunities.
8. Collaborate with the business development team to develop and execute sales plans.
9. Provide regular sales reports and updates to management.

Requirements:

1. Diploma in Mechanical Engineering or related field.
2. Proven experience in technical sales, preferably in the mechanical industry.
3. Strong customer relationship management (CRM) skills.
4. Excellent negotiation and communication skills.
5. Ability to analyze market trends and identify business opportunities.
6. Knowledge of mechanical engineering principles and products.
7. Demonstrated ability to achieve sales targets and drive business growth.
8. Proficient in presentation skills and delivering persuasive sales pitches.
9. Self-motivated and able to work independently as well as in a team.
10. Singaporean citizenship or valid work permit.

If you are a dynamic and ambitious individual with a passion for sales and mechanical engineering, we invite you to apply for this exciting opportunity. Please submit your resume, along with a cover letter highlighting your relevant experience and achievements.

Summary

Responsible for designing, developing, and maintaining automated systems to enhance production efficiency and accuracy. Strong analytical and problem-solving skills are essential.

Responsibilities

• Design, develop, and implement automated systems to improve production efficiency and accuracy.
• Work closely with cross-functional teams to identify automation opportunities in manufacturing and assembly processes.
• Program and maintain PLCs, robots, and other automated equipment.
• Develop user-friendly interfaces and dashboards for monitoring and controlling automated systems.
• Conduct troubleshooting, debugging, and performance tuning for automated equipment.
• Stay updated on advancements in automation technology to recommend and implement innovative solutions.

Requirements

• Recognized degree in Mechanical Engineering, Electrical Engineering, or Automation Engineering.
• At least 5 years of experience in industrial automation, including hands-on experience with PLCs, robotics, and sensors.
• Proficiency in programming languages such as Python, C++, or ladder logic for PLCs.
• Knowledge of Industry 4.0 principles and IoT integration.
• Strong analytical and problem-solving skills.

We are seeking a skilled and motivated Middleware Engineer to design, implement, and maintain middleware solutions that enable seamless integration between applications, services, and systems. The ideal candidate will have a deep understanding of middleware technologies, system architectures, and enterprise integration patterns. You will collaborate with cross-functional teams to ensure the performance, reliability, and scalability of middleware platforms.

Key Responsibilities:

1. Middleware Design & Implementation:Design and deploy middleware solutions to support enterprise application integration.
   Install, configure, and manage middleware technologies, such as WebLogic, WebSphere, Apache Kafka, or Oracle Fusion Middleware.
   
2. Integration & Automation:Develop and implement integration solutions using APIs, messaging, or event-driven architecture.
   Automate middleware deployment, monitoring, and maintenance using scripting or orchestration tools.
   
3. Monitoring & Troubleshooting:Monitor middleware performance and ensure high availability and reliability.
   Diagnose and resolve middleware-related issues in a timely manner.
   Conduct root cause analysis and implement preventive measures.
   
4. Security & Compliance:Ensure middleware solutions are secure and compliant with organizational policies and standards.
   Apply patches, updates, and security configurations to middleware components.
   
5. Collaboration & Support:Work closely with application developers, system administrators, and DevOps teams to align middleware solutions with business needs.
   Provide technical support and training for middleware technologies.
   
6. Documentation:Maintain accurate and comprehensive documentation for middleware configurations, processes, and standards.
   

Required Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Proven experience as a Middleware Engineer or in a similar role.
• Hands-on experience with middleware technologies (e.g., IBM WebSphere, Apache Kafka, Oracle WebLogic, or similar).
• Strong knowledge of enterprise integration patterns, API management, and service-oriented architecture (SOA).
• Proficiency in scripting languages (e.g., Python, Bash, or PowerShell).
• Familiarity with cloud platforms (e.g., AWS, Azure, Google Cloud) and containerization technologies (e.g., Docker, Kubernetes).
• Excellent troubleshooting and problem-solving skills.

Preferred Qualifications:

• Certifications in relevant middleware or cloud platforms (e.g., AWS Certified Solutions Architect, Oracle Middleware Certification).
• Experience with CI/CD tools (e.g., Jenkins, GitLab CI/CD).
• Knowledge of database systems and SQL.

Key Competencies:

• Strong communication and interpersonal skills.
• Ability to work independently and collaboratively in a team environment.
• High attention to detail and commitment to delivering quality solutions.

Responsibilities:

• Perform all aspects of QC responsibilities as it pertains to release activities that will include but is not limited to: sampling, testing, and disposition of raw materials and final packaging/ component lots
• Support additional areas of QC including Rejected, Quality Hold, and Non-conforming materials.
• Perform all activities adhering to strict cGMP guidelines
• Maintain on-time completion of all training requirements
• Perform simple laboratory instrument up keep including the cleaning, calibration, and the preventative maintenance of the instrument as outlined within the departments governing procedures
• Participate in department initiatives to support the continuous improvement of the quality systems of the QC department
• Practice safe work habits and adhere to safety procedures and guidelines

Requirements:

• Min Degree in Science or equivalent with at least 2 years of relevant experience in the pharmaceutical / chemical manufacturing industry.
• or Diploma in Chemistry, Lifescience, Pharmaceutical Science or any related course of studies with more than 5 years of experience
• Experience in operating laboratory equipment such as HPLC, GC , KF Titrators.

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Recruiter Reference Code: #HCG

Job Description & Requirements:

As a Frontend Engineer, you will be responsible for architecting and developing efficient, reusable, and visually appealing frontend systems for a trading application powered by AI models and LLMs. You'll work closely with cross-functional teams, including backend engineers, AI engineers, product managers, UI/UX designers, and the product design team to deliver a responsive, engaging user experience across web and mobile platforms. Your expertise will ensure a seamless blend of aesthetic and functionality.

Key Responsibilities:

• Architect, design, and develop efficient and reusable frontend systems (Web/Mobile)
• Collaborate with backend engineers, AI engineers, UI/UX designers, product managers, and other stakeholders to build comprehensive, architecturally sound, and visually appealing frontend solutions
• Optimize code to improve scalability, reliability, security, and performance of web and mobile applications
• Design interactive components, especially for chat-based and generative UI, to create dynamic LLM-powered user experiences
• Write comprehensive tests for all developed features to maintain software quality and reliability
• Documentation of design and architecture.

Qualification & Skills:

• Minimum 6 years of professional experience as a Frontend Engineer
• Expert in HTML5 / CSS3 / ECMAScript 6 + / TypeScript. Strong preference for candidates experienced with Tailwind CSS
• Proficient in modern frontend frameworks, including React and Vue, and/or React Native for mobile
• Skilled in state management tools such as Redux, Pinia
• Experience with API design principles, RESTful API integration and familiar with React Query
• Strong understanding of client-side performance, optimization.
• Deep knowledge of scalability, reliability, and security considerations in modern web development.
• Familiarity with LLM application development and generative UI/interactive components, particularly for chat-based applications
• Excellent collaboration and communication skills to work effectively across teams

Quantitative Trading Engineer / Quantitative Researcher

Working day: Monday to Friday, 9am to 6.30pm

Working location: Raffles Place

Salary: Discuss during interview

Responsibilities

Strategy Development:

• Use AI technologies such as machine learning and deep learning to intelligently optimize investment strategies and improve the performance of strategies in actual transactions.
• Extract predictive signals from financial data through both traditional statistical analysis methods and cutting-edge machine learning techniques.
• Formulate and apply mathematical modeling techniques to enhance existing trading strategies and perform innovative new research with the goal of identifying and capturing trading opportunities.

Data Analysis：

• Collect and analyze large financial datasets (market data, news, social media, etc.).
• Work with large data sets to predict and test statistical market patterns, combining knowledge of systems, mathematical techniques, and trading to identify the best places to improve the trading system.
• Build and optimize feature engineering pipelines to improve model prediction accuracy.

Financial Modeling:

• Construct, back-test, maintain, and improve financial models to support trading activities.
• Conceptualize valuation strategies, develop, and continuously improve upon mathematical models and help translate algorithms into code
• Conduct research and statistical analysis to build and refine monetization systems for trading signals
• Optimize the order execution and risk management of our trading system
• Create robust solutions to problems presented in the trading environment
• Build regression, classification, reinforcement learning and other models for market forecasting and trading decisions.
• Tuning the model's hyperparameters to improve model performance and stability.

Strategy backtesting and real-time testing:

• Backtest historical data to evaluate the strategy's yield, volatility, drawdown and other indicators.
• Deploy the strategy to the real-time environment, track performance and continuously optimize.

Requirements

• Master’s degree or above in Statistics, Mathematics, Applied Mathematics, Computer Science, Financial Engineering or equivalent.
• At least 2 years of experience in quantitative trading and machine learning modeling.
• Proficient in programming languages ​​such as Python, C++, Java, etc.
• Familiar with common machine learning frameworks such as TensorFlow, PyTorch, Scikit-learn.
• Familiar with quantitative trading systems, data flows and algorithms.
• Deep understand the structure of financial markets and be familiar with markets such as virtual currencies, stocks, futures, and foreign exchange.
• Experience in large-scale data processing, proficient in using SQL, NoSQL, Hadoop and other tools.

Bonus Skills

• Experience in developing high-frequency trading strategies will be an advantage.
• Participated in AI competitions (such as Kaggle) or published papers in top conferences (such as NeurIPS, ICML) will be an advantage.
• Familiar with cutting-edge AI technologies such as reinforcement learning, and generative adversarial networks (GANs) will be an advantage.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Identify customer needs and recommend product solutions.
• Responsible for the technical support for both presales and post sales.

Requirements:

• Degree in Electronics/Electrical Engineering
• At least 2 years of sales experience in artificial intelligence/physical security/CCTV or smart workspace solution.
• Knowledge of TCP/IP, Network Structure, Firewall, LAN and VLAN

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Instrumentation of measurement and detection equipment for military and homeland security.
• Oversee post-sales delivery of equipment, conduct scheduled maintenance, and conduct diagnostic analyses for troubleshooting and repair tasks.

Requirements:

• Higher Nitec in Electrical & Electronics Engineering or equivalent.
• At least 2 years of working experience

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Our client is one of the leading medical manufacturers. Due to business needs, they are now recruiting a Quality Assurance Engineer to be part of their QA Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Quality Assurance Engineer:

• Maintain and update Quality Management System (QMS) procedures to ensure compliance.
• Verify process documentation, including work instructions, quality inspection plans, data sheets, and inspection reports.
• Lead and guide quality control inspectors to uphold compliance standards.
• Oversee in-process and final quality inspections, collaborating with internal teams to address manufacturing quality issues.
• Resolve process non-conformance issues promptly and effectively.
• Address customer complaints through containment actions, root cause analysis, and implementation of corrective and preventive measures.
• Manage documentation control systems and facilitate internal and external audits.
• Ensure timely completion of customer environmental surveys and related requests.
• Provide support for QA/QC activities, projects, and other ad hoc duties as needed.

Requirements:

• Diploma in related field
• Relevant experience in Medical Manufacturing Industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for Software Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Job Responsibilities:

• Design solutions that meet functional requirements.
• Develop end-to-end specifications for solution components.
• Perform testing and implementation of the solution.
• Participate in impact analysis of encountered issues.
• Contribute to continuous improvement of software development best practices in the areas of coding tools, languages and APIs, as well as software design and development processes.

Participate in UX activities such as:

• Conduct user research/interviews
• Develop user stories, storyboards to articulate current and future concepts
• Create wireframes, detailed visual mock ups and interactive prototypes
• Create style guides and digital assets for production

Requirements:

• At least 2 – 3 years’ Software Engineer experience, with strong expertise in at least of the following languages: Java, JavaScript, Python, C#, .Net.
• Good understanding of software development lifecycle processes
• Proficiency in Web Technologies such as HTML, CSS
• Diploma or Degree in any IT discipline or equivalent

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

Job Responsibilities:

1. Assisting and supporting technical sales team in terms of scope of supplies and costing with respect to electrical, automation requirements during the prospecting stage for water/wastewater related systems and projects.
2. Liaising and communicating with agents/distributors/OEM partners/end-user customers on technical details and specifications of parts and components where EICA works are concerned.
3. Design and producing electrical, control panel drawings (AutoCAD or Eplan), BOM list generation and hardware component selection.
4. Developing PLC programming & HMI project (Siemens /Allen Bradley etc) for all process and functional controls of water/wastewater related systems and instrument.
5. Liaising, negotiating, and managing sub-suppliers/sub-contractors in Singapore and in the region with respect to procurements of all wiring and cabling works, fabrication and assembly of control panels for systems as well as for in-situ installation of water/wastewater related systems or projects.
6. Determining and monitoring procurement and production progress and schedules where cabling and wiring works, control panels’ PLC works and supplies are concerned.
7. On site electrical installation supervision, electrical panel testing, instrumentation configuration, loop test and automation commissioning works.
8. Compiling and handing over operation and maintenance (O&M) manuals (electrical and PLC portions etc) to our agents/distributors and end-user customers.

Requirements:

• Diploma / Degree in Electrical Engineering or Computer Science.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Minimum 5 to 8 years of working experience in Water Industry or engineering projects would be advantageous.
• Knowledge of PLC programming (Siemens /Allen Bradley etc)
• Willingness to travel locally or to regional countries occasionally for site installation, trouble-shooting or testing and commissioning duties at clients' project sites
• Able to work independently and a good team player.
• Senior position will be considered for candidates with more experience.
• Candidate who are able to start work within short notice or immediately would be advantageous.

Company Overview:

Quanta Integration and Solution Pte Ltd is a project based company working closed to with it’s partners who provided leading vehicle safety solution and telematics that specializes in providing cutting-edge technologies to enhance vehicle safety, efficiency, and connectivity. With a focus on innovation and customer satisfaction, Quanta Integration and Solutions is committed to delivering top-notch solutions to its clients.

Position Overview:

As an Assistant Installation and Maintenance Engineer, you will support the senior engineers in installing, maintaining, and troubleshooting vehicle safety and telematics systems. This role will provide you with hands-on experience in both installation and maintenance tasks, ensuring that all systems function effectively to meet customer needs.

Responsibilities:

• Installation Support: Assist in installing and configuring vehicle safety and telematics equipment under the supervision of senior engineers/project managers and etc.
• Maintenance & Troubleshooting: Support routine maintenance tasks and assist in resolving hardware and electronics issues to ensure systems function effectively.
• Customer Support: Provide on-site technical support, responding to customer inquiries and helping resolve system issues.
• Safety & Compliance: Follow safety standards and industry regulations during installations and maintenance activities.
• Equipment Management: Help prepare and organize tools, equipment, and resources for technical tasks.
• Quality Checks: Assist in quality control procedures, ensuring that installed systems meet performance and safety standards.
• Reporting: Keep records of installation, maintenance, and troubleshooting activities/update immediate supervisors and project supervisors accordingly.

Qualifications:

• Degree/Diploma or equivalent from Polytechnics/ Universities in Electronics, Electrical Engineering, or a related field.
• Basic knowledge of vehicle safety solutions, telematics, and electronics systems.
• Hands-on experience in installing and troubleshooting electronics or automotive equipment is a plus.
• Ability to read and understand technical diagrams and manuals.
• Strong problem-solving skills and attention to detail.
• Good communication and teamwork abilities.

Benefits:

• Competitive salary and benefits package.
• Opportunities for professional growth and development.
• Collaborative and dynamic work environment.
• Exposure to innovative technologies in the automotive and telematics sectors.

Brief Description & Role

This position is responsible for testing, troubleshooting, and repairing RF components and systems. You will work closely with cross functional teams to ensure the quality and performance of RF equipment, ensuring that all devices meet the required specifications and standards.

Responsibilities

1. Work with business development, Engineering, system test and external customers to gather information and develop RF Test plans, specifications for product under test.
2. Perform RF testing using test equipment such as spectrum analyzer, noise figure meter, power meter, network analyzers, and signal generators.
3. Assembling/debugging the RF test system and device under test.
4. Hands on troubleshooting and repair of RF product till component level using RF and digital measurement tools & equipment.
5. Analyze test data and provide reports on yield.
6. Document test procedures, results, and any issues encountered during testing and debugging.
7. Assist in the development of new RF testing methodologies and best practices.
8. Do simple antenna parametric radiation measurement

Requirements

· Diploma /Bachelor in Electronics or Communication Engineering, or equivalence

· Preferably with at least 2 years of working experience in a product-based electronics manufacturing environment / product development.

Skills, Experiences & Knowledge

· Experience in automating test and measurements using bench test equipment.

· Knowledge of programming software in C, C#, Python or LabView.

· Experience with PCB design software

· Experience in antenna parameter measurement

· Preferably with soldering experience

· Excellent communication and documentation skills.

JOB RESPONSIBILITIES

· Design, create, revise and maintain structural drawings related to Heavy Lifting using AutoCAD

JOB DUTIES

· Strong in concept design, architectural details, working drawings and construction practices as per site condition

· Liaise with Project Managers for drawings and submission approval on machinery

· To produce the design drawings within the time frame given with minimum supervision

· Provide technical support on site to engineering personnel

· Support Sales and Operations Department on technical support

· Assist in designing of name cards and company yearly calendar by using Adobe Photoshop

· Any other ad-hoc duties as per instructed

SKILLS AND QUALIFICATIONS

· Diploma In Civil Engineering or related fields

· Min 2 years relevant experience in Singapore or overseas is an added advantage.

· Creative and well versed in AutoCad 2D & 3D, Adobe PhotoShop, Adobe Illustrator, Google Sketch/SketchUp and Movie Maker

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for a Manufacturing and Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Offer continuous technical support to contract manufacturers, resolving electronic engineering issues encountered during production.
• Work closely with manufacturers to establish and uphold rigorous quality control standards, ensuring reliable and consistent product performance.
• Analyze manufacturing workflows to identify and implement process improvements that boost efficiency and productivity.
• Address and resolve electronic engineering challenges to prevent production delays and minimize defects.
• Collaborate with design and development teams to implement design enhancements that improve product quality and streamline manufacturability.
• Coordinate investment audits with cross-functional teams, conduct regular physical asset inspections, and assist with annual inventory checks as needed.
• Any ad-hoc duty as given

Requirement

• Min Bachelor's degree in Electronic Engineer or a related field
• Min 4 years in EMS - Electronic device assembly
• Good understanding in overall supply chain, manufacturing technology, process set-up, process validation and SOP support
• Knowledge and experience in manufacturing, planning, quality, SAP, PLM
• Knowledge and experience in wearable electrical device's assembling
• Comfortable to travel overseas often

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Provide presales support by solving technical business solutions for the client.
• Responsible for product demonstration, proposal writing, creating compliance table, training and product enablement.
• Develop working proficiency and obtain certifications on assigned products and technologies.
• Conduct hands-on POC independently and present vendor’s solution to partners and end-users.

Requirements:

• Diploma in Computer Studies or equivalent
• At least 2 years of presales experience in IT network and Cybersecurity domain.
• Good knowledge of security and networking infrastructure environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Salary: up to $2500
Working Days & Hours: Mon-fri office hrs

Location: Boon Lay

Job Description:
Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.

• Perform basic checks, calibration and maintenance of test equipment to ensure that test results are accurate.
• Assist and support in non-conformance and investigations of customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Responsible for data entry, clerical and admin support.
• Maintain housekeeping of QC laboratory to ensure a clean and safe working environment.
• Assist and support in the implementation of continuous improvements in QA/QC functions.
• Carry out ad-hoc duties as assigned, when and where necessary.

Job Requirements: Min Diploma in Sciences or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Role & Responsibility:

• Set design requirements based on information from internal teams and user research.
• Identify new product improvement opportunities.
• Analyze how a new product satisfies business needs and user preferences.
• Modify and revise existing designs to meet changing customer preferences.
• Work closely with product engineers to suggest improvements for products and processes.
• Present product design ideas to cross-functional teams
• Help development teams create components by ensuring its built according to design and interaction specifications.
• Maintain the design system, create, and update documentation, and library components.
• Establish design standards and principles accompanying the design system for scalability, efficiency, and consistency.

Skillset Requirements

• Proven experience in all phases of the design process including user research, copywriting, wireframing, prototyping, visual design, interaction design, and usability testing.
• Proficiency and mastery of standard design tools (Figma, Sketch, Adobe CS and XD).
• Demonstrable experience in building design systems, component libraries, and/or UI Kits.
• An intuitive eye for customer needs beyond the obvious.
• Excellent attention to detail.
• Ability to collaborate with cross-functional team members.
• Ability to collect and interpret both qualitative and quantitative feedback.
• A well-rounded portfolio of client work, demonstrating a strong understanding of client objectives.
• Ability to effectively communicate and persuade around design concepts.
• Passion for design, not satisfied with the status quo and always thinking of ways to improve.
• Creative problem-solving skills.
• Dynamic, creative personality, effective at engaging and influencing a variety of audiences.
• Provide assistance to product engineers when needed.
• Recommend new tools and technologies by staying abreast of the latest trends and techniques.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Roles & Responsibilities

• Site & office project management and daily operations including inspections, handover, site measurements, project management.
• Handling technical and engineering issues.
• Overall project planning, scheduling, monitoring and updating to meet project completion targets.
• Liaison and meeting with client's representatives, relevant authorities and consultants.
• Site co-ordination, monitoring and report work progress.
• Responsible for timely submission of reports and completion of projects including tender/submission with target dates
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of projects
• Conduct site check on the repair works in building structures, in accordance with approved methods and procedures proposed by the Qualified Person, specifications and instructions.

Requirement:

• Degree or Diploma in Civil/ Structural Engineering or equivalent
• Incumbent with working experience on Singapore LTA / Rail project preferred
• Possessing 2 years of working experience in the related field will be advantageous.