Total 712 Others/Any quality assurance engineer job vacancies in D02 Anson, Tanjong Pagar

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Mon to Fri 8.30am - 5.30pm

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

The Role

As Head of Age Assurance , you will be responsible for driving the strategic direction, operational success, and market leadership of our age assurance and verification product. This is a high-impact role requiring an entrepreneurial mindset, deep understanding of AI-driven technology, and a passion for creating safe and secure digital ecosystems.

Key Responsibilities

Strategic Leadership

• Define and execute a vision and strategy for the product, ensuring alignment with the company’s global goals and regional market needs.
• Identify and capitalize on growth opportunities across sectors such as gaming, social media, and e-commerce, emphasizing regulatory compliance, privacy and trust.
• Establish Singapore as a regional hub, managing operations, building a local team, and driving business development.

Product Innovation and Development

• Oversee the development of cutting-edge AI-driven solutions for age assurance and facial age estimation, ensuring they meet industry-leading standards of accuracy, fairness and privacy.
• Work closely with R&D, engineering, and product teams to refine features and stay ahead of market trends.
• Advocate for customer-driven innovation, bringing insights from users back into the product roadmap.

Market Development and Partnerships

• Build relationships with regulators, industry leaders, and technology partners to establish trust and promote adoption of the product.
• Develop partnerships with gaming platforms, social media companies, financial institutions, and e-commerce providers requiring robust age verification.
• Lead go-to-market strategies to expand adoption in APAC and beyond, ensuring the product is positioned as a market leader.

Operational Excellence

• Set up and manage local operations in Singapore and other remote employee locations, ensuring cross-functional collaboration and alignment with global teams.
• Monitor key performance metrics (e.g., market penetration, customer satisfaction, retention rates) and optimize operational efficiency.
• Manage the regional P&L, ensuring sustainable growth and profitability.

Regulatory and Ethical Compliance

• Ensure the product adheres to global and local data protection regulations, including PDPA, GDPR, and similar standards.
• Advocate for ethical AI usage, promoting transparency and accountability in facial recognition and age estimation technologies.
• Engage with policymakers and industry bodies to influence standards and best practices.

Team Leadership

• Recruit, mentor, and lead a high-performing team across functions including sales, marketing, product, and operations.
• Foster a culture of innovation, collaboration, and accountability to achieve ambitious goals.

QualificationsExperience

• 10+ years in senior leadership roles, preferably in the tech, SaaS, AI, or biometric technology industries.
• Proven success in scaling innovative products, with experience in customer acquisition, market expansion, and operational excellence.
• Strong familiarity with regulatory environments for data privacy and age verification.
• Experience in global markets, with a track record of building partnerships and navigating cultural nuances.

Skills

• Visionary leadership with strategic planning and execution capabilities.
• Deep technical understanding of AI/ML and facial recognition technologies.
• Exceptional stakeholder management skills, including the ability to engage with regulators, enterprise clients, and internal teams.
• Strong operational and financial acumen, with the ability to manage P&L and deliver sustainable growth

Education

• Bachelor’s degree in Business, Computer Science, or a related field.
• MBA or advanced degree preferred.

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

About Moore

At Moore, our purpose is to help people thrive – our clients, our people, and the communities they live and work in. We are a global accounting and advisory family with over 37,000 people in 558 offices across 114 countries, connecting and collaborating to take care of the needs of our stakeholders - our clients, our people and the community at large - at local, national and international levels.

When you work with Moore firms, you will work with people who care deeply about your success and who have the dedication to develop you to the full potential. In Moore Stephens LLP, you will be part of a business transformation process in the creation of a unique firm.

About the role

You will have the opportunity to help shape, influence and drive the business of the Firm. We are looking for ambitious candidates who can and wish to make a difference. Your personal development needs will be provided for by the Firm. Audit Directors will be groomed to be admitted as Partners under the Firm’s fast track programme. Direct admittance to Partnership is envisaged for the right candidates.

Responsibilities:

• Lead a team of audit professionals and manage a portfolio of audit clients
• Oversee proper execution of external audit engagement including planning, execution of fieldwork and review of audit engagements
• Develop and maintain client relationships develop new business opportunities
• Involvement in functional areas and development of new service lines

Requirements:

• A recognized degree in Accountancy or professional accounting qualifications such as ACA, ACCA, CPA, Australia or equivalent
• Experience in shipping industry is an advantage
• Relevant experience with large/medium size public accounting firms
• Excellent communication, technical and interpersonal skills

Position Summary

This position play a critical role in driving compliance and quality programs for Healthcare Transportation & Facilities and supporting the Healthcare Quality Management System to ensure processes and systems are compliant with regional and local regulations and customer requirements.

Job Scope

1. Quality Policies & Procedures: Determine, implement & promote policies and procedures for company’s Network and facilities (hubs & stations) to ensure compliance to standards such as GDP, GCP and others.

2. Quality Assessment & Standards: Write & review SOPs and Work Instructions for transportation & fulfilment solutions pertaining to the healthcare industry.

3. Compliance & Quality Program Management: Implement compliance and quality programs to support local Quality teams to ensure they are kept up-to-date and prepared.

4. CAPA Process Management: Lead in process creation and review of documentation on the implementation and responses to corrective and preventive actions (CAPAs) and monitor action progress until closure.

5. Healthcare Quality Management System: Develop, implement & support the system and processes, develop corresponding training programs, and acts as Super User for eQMS system.

6. Internal Audit Programs: Design & implement robust internal audit processes to ensure readiness of various functions & processes when meeting regulatory agencies & customer audits.

7. Certification Audits: Lead various certification audits with relevant regulatory agencies and certification providers across the region.

8. Operations & Customer Audit Programs: Lead & prepare for regular audit programs / random checks / regulatory activities to achieve successful audit outcomes and proper post audit follow up actions.

9. Healthcare Customer Liaison: Liaise with customers to understand quality requirements / issues / underlying concerns to advise on the way forward, provide advice based on interpretations as applicable to 3PL and resolve issues via conducting root cause analysis.

10. Healthcare Quality Feedback: Liaise, consolidate feedback from different functions to update and prepare final copy for Quality Questionnaires, Agreements and RFQ Proposals for customers.

11. Validation Programs: Lead the validation of transportation lanes and critical equipment like cold chain facilities, and packaging systems.

12. Depot Support: Provide secondary / backup support to healthcare specialists for market depots.

Requirements :

1. Hold local pharmacist license

2. Have at least five (5) years of relevant experience in warehouse, quality + QMS for pharmaceutical / healthcare industry

3. Have competencies in quality assurance / regulatory affairs, customer relationship management and root cause analysis

4. Have working experience ensuring compliance in accordance to Goods Manufacturing Practise cGMP,)/, Good Clinical Practises cGCP, Goods Distribution Practice (GDP) & ISO13485 for Medical Devices, IATA CEIV and other local certifications in a warehouse and transportation business.

5. Experience in conducting external and internal audits for regions

6. Must hold at least Bachelor’s degree in Pharmacy from a reputable local or Australia’s institute.

7. This position require to communicate with counter part in China

8. Occasionally travel is required to sites and region warehouses.

Competency

1. Accuracy & attention to detail which is crucial to proper compliance to regulatory and standards

2. Problem-solving skills to support customer issue resolution

3. Planning & organization skills to ensure proper audit programs are managed effectively

4. Communication skills to facilitate engagements with customer and regulatory agencies

5. Project management capabilities and familiarity with Process Mapping, Six Sigma, Lean Methodology, Agile or Design Thinking

6. Apply data-driven decision making with the use of data analytics and visualization tools like Power BI and competency in Microsoft Office applications like Excel, Word, and PowerPoint

Mon to Fri 8.30am - 6pm

Location: East Side

Responsibilities:

The primary responsibility of this position is to provide leadership for all Quality Assurance & Control matters.

• Assuring consistent quality of production by developing processes and enforcing compliance to ISO 13485 quality system.
• Validating the production & inspection processes and maintaining validation status
• Managing the records for Quality Inspection, Quality Control, Calibration, QA Lab equipment, Training Resources, ERP Quality Module and Quality System Documentation.
• Managing a team of Engineers, QA Technicians & Quality Inspectors

Requirements:

• Bachelor’s in Engineering or Science / Master’s in Engineering or Science
• Extensive experience within a manufacturing environment with a thorough understanding of ISO 13485 and ISO 9001.
• Six Sigma certification and/or ASQ certified Quality Engineer

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Mon to Fri 8.30am - 6pm

Position Summary

This position play a critical role in driving compliance and quality programs for Healthcare Transportation & Facilities and supporting the Healthcare Quality Management System to ensure processes and systems are compliant with regional and local regulations and customer requirements.

Job Scope

1. Quality Policies & Procedures: Determine, implement & promote policies and procedures for company’s Network and facilities (hubs & stations) to ensure compliance to standards such as GDP, GCP and others.

2. Quality Assessment & Standards: Write & review SOPs and Work Instructions for transportation & fulfilment solutions pertaining to the healthcare industry.

3. Compliance & Quality Program Management: Implement compliance and quality programs to support local Quality teams to ensure they are kept up-to-date and prepared.

4. CAPA Process Management: Lead in process creation and review of documentation on the implementation and responses to corrective and preventive actions (CAPAs) and monitor action progress until closure.

5. Healthcare Quality Management System: Develop, implement & support the system and processes, develop corresponding training programs, and acts as Super User for eQMS system.

6. Internal Audit Programs: Design & implement robust internal audit processes to ensure readiness of various functions & processes when meeting regulatory agencies & customer audits.

7. Certification Audits: Lead various certification audits with relevant regulatory agencies and certification providers across the region.

8. Operations & Customer Audit Programs: Lead & prepare for regular audit programs / random checks / regulatory activities to achieve successful audit outcomes and proper post audit follow up actions.

9. Healthcare Customer Liaison: Liaise with customers to understand quality requirements / issues / underlying concerns to advise on the way forward, provide advice based on interpretations as applicable to 3PL and resolve issues via conducting root cause analysis.

10. Healthcare Quality Feedback: Liaise, consolidate feedback from different functions to update and prepare final copy for Quality Questionnaires, Agreements and RFQ Proposals for customers.

11. Validation Programs: Lead the validation of transportation lanes and critical equipment like cold chain facilities, and packaging systems.

12. Depot Support: Provide secondary / backup support to healthcare specialists for market depots.

Requirements :

1. Hold local pharmacist license

2. Have at least five (5) years of relevant experience in warehouse, quality + QMS for pharmaceutical / healthcare industry

3. Have competencies in quality assurance / regulatory affairs, customer relationship management and root cause analysis

4. Have working experience ensuring compliance in accordance to Goods Manufacturing Practise cGMP,)/, Good Clinical Practises cGCP, Goods Distribution Practice (GDP) & ISO13485 for Medical Devices, IATA CEIV and other local certifications in a warehouse and transportation business.

5. Experience in conducting external and internal audits for regions

6. Must hold at least Bachelor’s degree in Pharmacy from a reputable local or Australia’s institute.

7. This position require to communicate with counter part in China

8. Occasionally travel is required to sites and region warehouses.

Competency

1. Accuracy & attention to detail which is crucial to proper compliance to regulatory and standards

2. Problem-solving skills to support customer issue resolution

3. Planning & organization skills to ensure proper audit programs are managed effectively

4. Communication skills to facilitate engagements with customer and regulatory agencies

5. Project management capabilities and familiarity with Process Mapping, Six Sigma, Lean Methodology, Agile or Design Thinking

6. Apply data-driven decision making with the use of data analytics and visualization tools like Power BI and competency in Microsoft Office applications like Excel, Word, and PowerPoint

Job Description & Requirements

Job Description

• To assist in contract administration which include cash flow/ budgetary forecasts, cost estimates, cost data analysis, tender evaluation, processing of payments, claims, variation orders and preparation of reports and approval papers
• To ensure that contracts are administered in accordance with executed contract documents

Responsibilities:

• Coordinate with internal operation, M&E and Design team for interfacing works affecting architectural items
• Attending meeting with client, consultants or sub-con to discuss all architectural related issues.

Requirements:

1. Degree in engineering specialization in electrical and electronics engineering.

· Have experience in engineering life cycle of Power Projects and have gone through all phases of project starting from FEED stage to conceptual and basic design to detailed engineering, procurement, tendering, construction to commissioning.

· Programing skills PLC, SCADA, AUTO CAD

· At least 6 years’ experience in local project

Responsibilities:

The primary responsibility of this position is to provide leadership for all Quality Assurance & Control matters.

• Assuring consistent quality of production by developing processes and enforcing compliance to ISO 13485 quality system.
• Validating the production & inspection processes and maintaining validation status
• Managing the records for Quality Inspection, Quality Control, Calibration, QA Lab equipment, Training Resources, ERP Quality Module and Quality System Documentation.
• Managing a team of Engineers, QA Technicians & Quality Inspectors

Requirements:

• Bachelor’s in Engineering or Science / Master’s in Engineering or Science
• Extensive experience within a manufacturing environment with a thorough understanding of ISO 13485 and ISO 9001.
• Six Sigma certification and/or ASQ certified Quality Engineer

HOW TO APPLY:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Duties & Responsibilities:

IT Infrastructure

• Windows server configuration and support
• Experience in configuring and troubleshoot Firewalls, Switches, network routing and WIFI Access Point to maximize network efficiency and security
• Maintain and updating network equipment to the latest firmware releases
• Experience in Office 365, Teams, One Drive and SharePoint support
• Cloud experience in Azure and Amazon Web Services (AWS) would be an added advantage
• End-user, computer and software support
• Knowledge of SD-WAN technology
• Regional countries remote support is required

Technical Talent Specialization

• Good knowledge on Windows servers and routing protocol
• Preferable those possess CCNA / CCNP / CCIE / CompTIA Network & Security
• Good knowledge on Firewalls (Palo Alto)
• Good understanding of LAN/WAN and TCP/IP networks
• Good knowledge on Azure or AWS cloud technology
• Good knowledge on Office365

Experience & Skill-set required:

• Diploma/Degree in Computer Engineering/Science, Information Technology or related field or a combination of education and experience
• At least 5 years’ experience in IT networking support related experience
• Strong IT Technical understanding and a hands-on person
• Fast learner and able to adapt to frequent changes in business environment
• Able to multi task, work independently and prioritize workloads effectively
• Team player

About MyrLabs

MyrLabs is an A*STAR spin-off that creates cutting edge hardware and algorithms. The MyrLabs team consists of driven and multi-disciplinary engineers dedicated to bringing game-breaking solutions for our partners by innovating at the PCB, firmware, and software levels. We work on problems that academia fears to, cannot, or will not address. These are problems that are difficult and require multi-disciplinary efforts. Our approach focuses on the use of non-mainstream techniques to spark creativity and to solve problems in ways that are not seen before.

Job Brief

We are forming a team of Software Engineers. You would start out under the guidance of more experienced engineers to design and create software systems that are used across our product lines. Depending on your preference and expertise, your focus may be on backend, frontend, or mobile applications. Having expertise across multiple disciplines is highly encouraged in MyrLabs and we would support you with the opportunities to be cross-trained. The work that you do will be used in publicly accessible environments and be used to address real-world needs.

Responsibilities

1. Work with senior software engineers to design and implement suitable solutions and systems
2. Optimise the performance of existing applications on different platforms
3. Participate in the continued development across our product lines

Technical Requirements

• Relevant Bachelors or Masters in the field of Computer Science, Computer Engineering, Software Engineering, OR proof of exceptional talent.
• Familiarity with one or more of the following languages: JavaScript, Python, C/C++/C#, Swift, Kotlin, Java
• Familiarity with one or more of the following: Unity, React, React-Native, NextJS, AWS

Nice to Haves

• Experience with Scrum / Agile
• Experience with UI / UX Design
• Familiarity with DevOps and CI/CD
• Familiarity with Algorithms

Other Qualities We Value

• Ability to work in a fast-paced, small-team environment
• Passion for good code, curiosity, and self-discipline

Benefits & Perks

• Group health insurance with outpatient care
• Up to 10% of your time may be allocated to projects that translate our technologies into devices that benefit persons with disabilities

Instructions for Polytechnic Graduate Applicants

We welcome polytechnic graduates, but we require that you commit to a part-time B.Eng course at a public university during the course of your employment. The journey will be tiring and gruelling, but we will tailor your work to support your studies and revise your salary to recognize your years of experience upon graduation.

After application, please send your resume, MBTI profile, and portfolio of previous work to [email protected]

You can do a free MBTI test at: https://www.16personalities.com/free-personality-test

Job Overview:

As a Mechanical Engineer, you will be part of a dynamic, multidisciplinary team that includes software, computer, mechanical, electronics, and communications engineers. Together, you will bring innovative ideas to life, advancing the capabilities of our client’s systems. The goal is to develop smarter, faster, and more adaptable solutions that seamlessly integrate with other systems and meet a wide range of mission requirements.

Location:

Ang Mo Kio

Key Responsibilities:

• Design and develop mechanical components and modules for advanced underwater robotics and sensor systems.
• Conduct design analyses, assess new technologies, and perform trade-off studies for novel systems.
• Participate in all phases of mechanical design, from conceptualization to detailed design, ensuring strong foundational principles.
• Oversee hardware system integration, testing, and assembly at both module and system levels.

Required Qualifications:

• A degree in Mechanical Engineering, Mechatronics, or Robotics.
• Proficiency in 3D CAD modeling and creating technical drawings.
• Strong understanding of engineering fundamentals, including design principles, materials, fabrication processes, and equipment.
• Familiarity with GD&T, thermodynamics, and hydrodynamics is a plus.
• A passion for engineering design and research, particularly in underwater robotics and sensor systems.
• Solid experience in product design and process development, with strong analytical skills for problem-solving during system integration and testing.
• Eagerness to tackle new challenges and learn continuously.
• Ability to work efficiently within tight deadlines.

Objectives of this position:

The objective of the position is to manage the extract/transform/load processes ensuring the data availability.

Responsibilities:

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

•Design, create, modify extract/transform/load (ETL) pipelines in Azure Data Fac-tory ensuring efficient data flow from source to destination.

•Ensure data accuracy and data integrity throughout the ETL processes via data validation, cleansing, deduplication, and error handling to ensure reliable and us-able data being ingested.

•Monitor the ETL processes and optimize ETL pipelines for speed and efficiency, addressing bottlenecks, and ensuring the ETL system can handle the volume, ve-locity, and variety of data.

•Participate in data modeling, designing of the data structures and schema in the data warehouse to optimize query performance and align with business needs.

•Work closely with different departments and IT team to under-stand data requirements and deliver the data infrastructure that supports business goals.

•Provide technical support for ETL systems, troubleshooting issues and ensuring the continuous availability and reliability of data flows.

•Ensure proper documentation of data sources, ETL processes and data architecture.

Requirements:

3 to 5 years of data engineering in Snowflake

3 to 5 years in upstream / downstream Retail industry and/or Supply Chain / Manufacturing domain

Sound Understanding of data quality principles and data governance best practices

Proficiency in data analytics languages like Python, Java, Scala, etc.

Knowledge of big data technologies like Hadoop, Spark and distributed computing frameworks to manage large scale data processing.

Proficient in using version control systems like Git for managing code and configurations.

SnowPro Core Certification and SnowPro Advanced Certification will be advantage

Responsibility

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

Design and build the DWH database models (star schema).

Manage the semantic model in Oracle Analytics Cloud to provide a unified view of our organization's data.

Manage application roles and access rights for end users including row level security filters, to protect sensitive data.

Work with ETL specialists, IT business Consulting as well as external vendors to ensure data ingestion and integration into the database model

Collaborate with Business Controlling and business counterparts on new reporting requirements.

Ensure data quality, security and compliance with industry standards and internal guidelines.

Ensure proper documentation of data infrastructure, data models, workflows as well as security concepts in accordance with internal security policies.

Skills

Looking for a Data Engineer more focused on Database modelling, Currently in Oracle environment and going forward with GCP stack.

Proficiency in SQL and data warehousing

Strong understanding of data modelling techniques and hands on experience building database models (star schema).

Expertise with ETL (extract, transform, load) processes. Familiarity with BI tool integration such as Tableau or Looker

Strong analytical thinking, problem-solving capability, and ability to translate business needs into technical specifications.

Customer-oriented with good communication and interpersonal skills.

• Co-ordinate and liaise with contractors, vendors and tenants.
• Assist your supervisor to plan, monitor and control project schedule and progress.
• Supervise the installation and commissioning of mechanical and electrical upgrading or improvement works.
• Monitor machinery and equipment operational performance and condition.
• Conduct scheduled preventive maintenance programs.
• Troubleshoot, repair and handle all maintenance works.
• Assist to review and update existing machinery and equipment maintenance record.

Job Requirements

• Minimum Diploma or Degree in Electrical or Mechanical Engineering.
• At least 5 years' relevant experience in machine repairing/maintenance/electrical wiring.
• Good communication and interpersonal skills.
• A good team player and able to work independently with minimum supervision.
• Shift work is required. Must also be prepared to be on standby after scheduled working hours.

Key Responsibilities:

- Develop and maintain front-end applications using React.

- Build and optimize back-end services with Java and MSSQL.

- Design and implement RESTful APIs and integrate with front-end components.

- Troubleshoot and optimize application performance.

Required Skills:

- 3+ years of experience in React, Java (Spring, Hibernate), and MSSQL.

- Solid knowledge of RESTful APIs, JavaScript, and SQL.

- Experience with front-end build tools (e.g., Webpack, Babel).

- Familiarity with version control (Git) and Agile development practices.