Total 1,300 Junior Executive quality assurance engineer job vacancies in Islandwide

Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

• Well Established Company
• Basic $ 2700 to $ 3500 + AWS + VB
• No Experience Welcome – Training will be provided
• Working Location: Tuas, Singapore (Company Transport Provided)
• Normal Working Hours (Monday - Friday)

Job Responsibilities:

• Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out incoming process inspection
• Authorise the rejection of parts if found unsatisfactory
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers
• Perform factory routine test and check of switchboards completed in the workshop
• Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints
• Maintain good housekeeping in the QA department
• Observe and adhere to safety rules during the performance of every task
• Initiate, recommend, or provide solutions to problem detected
• Control further processing and delivery of non-Conforming products until the deficiency has been corrected
• Follow the procedures of Quality Management System for effective implementation and control
• Carry out other responsibilities as and when assigned by the superiors

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

The Company

Our client is a leading financial services assurance & advisory team that collaborates to build trust and solve important problems. Work with top-tier clients in the insurance sector and this is an excellent opportunity to get exposure in professional consulting firm for assurance services.

The Role

You will be working in teams to assist your Audit Seniors in audit support work for primarily the life insurance clients.

Your Profile

Ideally you shall equip with knowledge in Actuarial Science, Mathematics, Statistics or other related disciplines that possesses an analytical and quantitative component. A self-driven learner with the ability to quickly learn and apply new tools and techniques such as proprietary actuarial software and cash flow models. You should have an appreciation for structured methodical research, critical thinking and problem-solving skills with an understanding for the application of these skills in the business environment. A natural curiosity to identify, investigate and explain trends and patterns in data and the ability to analyse and break down complex concepts and technical findings into clear and simple language for communication to team members and clients.

You are expected to have working knowledge of Microsoft Office (Excel, Word), including VBA programming. Knowledge of any of the following will be an added advantage:

1. Programming (e.g. VBA, C++, Java, Python)
2. An analytical software (e.g. R, SAS)

Our esteemed client, an established MNC, is searching for a QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

Job Title

Construction Administrative Department Coordination Engineer

Occupation

ASSISTANT ENGINEER (a junior role, office based with occasions to attend to the sites)

Working Hours

Mon – Fri 8:30 am to 6 pm

JOB DESCRIPTION & REQUIREMENTS

Job Description

• Provide administrative support to Construction Administrative Department (CAD) Managers and others as needed.
• Assist in preparing written materials, including correspondences, reports and submittal packages.
• Assist with the collection, review, monitoring of status and organisation of Department of Construction Administrative (CAD).
• Prepare and distribute routine reports and attend to other needed administrative tasks.
• Attend Tender meetings, take and distribute minutes as needed.

Job Requirements

• A degree in engineering, preferably in electrical engineering.
• Ability to coordinate and maintain files and correspondences.
• Ability to work in a fast-paced environment with competing priorities.
• Excellent interpersonal skills.
• Proficiency in Microsoft Office applications.
• No prior knowledge of Japanese proficiency required, but good to have for the ease of communicating with Japanese superior.

Job ID: 19411

• Location: Expo
• Working hours: 9am - 6pm
• Salary: up to $4,500 (Depending on experiences)

Job Description

• Provide technical support to customers either on-site or remotely.
• Troubleshoot and repair systems at customer site.
• Install new test systems and software upgrades.
• Work on projects such as creating manuals/SOPs etc.

Job Requirement

• Diploma or Degree in Electronics, Mechatronics, or a related field.
• Proficiency in Japanese (written and spoken) to effectively communicate with counterparts in Japan during weekly meetings, training, or troubleshooting.
• Intermediate skills in Microsoft Excel and Word.
• A team-oriented mindset with strong interpersonal and communication skills (oral and written).
• Willingness to travel frequently overseas on short notice.
• Flexibility to work overtime or on public holidays if necessary.
• A proactive attitude toward acquiring technical knowledge relevant to the role.
• Prior experience in a customer support role.
• Over 5 years of experience in the semiconductor industry.
• Familiarity with lasers, oscilloscopes, spectrum analyzers, or other similar instruments.
  

Interested applicants, kindly send your updated resume to Joanne (R21101135) [email protected] with the email subject header "Job Application for "19411, Assistant Engineer/Engineer".

Only shortlisted candidates will be notified, other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Pasona Singapore Pte Ltd

Joanne Yeo Min Qian
EA License No:90C4069

Registration No.: R21101135

Overview

As the Lead Engineer at Synapxe, you will be responsible for overseeing the design, implementation, and maintenance of our IT Systems. As an experienced Systems Engineer, you will continue to optimise systems performance to ensure its availability. The role will allow you to contribute to the overall success of Synapxe and public healthcare.

Role and Responsibilities

Infrastructure Design and Implementation:

• Lead the design and deployment of infrastructure solutions such as Server OS, Active Directory, VMware and related services.
• Ensure the architecture aligns with business objectives and best practices.

Systems Enhancement and Maintenance:

• Administer and maintain servers, storage systems, virtualization platforms, and networking equipment.
• Monitor system performance and proactively troubleshoot issues to ensure optimal operation.
• Implement monitoring tools and systems to proactively detect and resolve performance issues.
• Continuously optimize system performance and capacity.

Disaster Recovery and Business Continuity:

• Develop and maintain disaster recovery and business continuity plans to safeguard critical systems and data.
• Conduct regular testing of recovery procedures.

Troubleshooting and Resolution:

• Oversee the assessment of risks to systems.
• Identify complex system issues to provide advisory to the stakeholders.
• Provide escalation support for issues presented by the user.

Requirements / Qualifications

• Bachelor's degree in computer systems, information technology, or a related field (or equivalent experience).
• 9 years of experience in systems engineering or a similar role.
• Extensive knowledge of server administration, operating systems (Windows and Linux/Unix), virtualization technologies, and networking concepts.
• Excellent problem-solving and decision-making abilities.

Job description

Job Description

• - Plenty of practical opportunities in all fields, especially commercial and railway engineering.
• - Be involved with qualified Professional Engineers for mentorship.
• - To manage a team of Internship Trainees / new site hires
• - Project management on-site
• - Prepare test reports, method statements, project implementation work, ad hoc duties etc as required.

Requirements

• - Diploma in Electrical Engineering
• - Prior experience in engineering / management preferred
• - Singapore Driver Licence if any

Job Description

To conduct laboratory tests (using e.g. electrodynamic shaker and temperature/humidity chambers) in accordance with the test procedure.

To direct the test operator on the operation of test equipment (e.g. electrodynamic shaker and temperature/humidity chambers) to meeting the test requirement [NOTE: There are several laboratories which the technician is required to make (approximately 10 trips) to these laboratories every quarter.

To liaise with equipment designers by coordinating the date/time to perform functional checks on Product Under Test.

To perform visual inspections of Product Under Test before and after tests in accordance with visual inspection checklist.

To inform customer on any test anomaly to discuss on follow-up action required.

To provide records of test and visual inspection results.

To perform mechanical drafting & design works.

Requirements

• Higher NITEC / Diploma in Mechanical Engineering

• ESS/PDU/GD&T experience will be advantageous but not essential

• Able to work independently with minimum supervision

Working Hours

The working hours are as follows:

Mondays to Thursdays: 8:30am to 6:00pm

Fridays: 8:30am to 5:30pm

Lunch: 1 hour

Job Description

• Industry/ Organization Type: Engineering (O&G)
• Position Title: Assistant Engineer
• Working Location: Pioneer
• Working Hours: 5 days (Mon to Fri 8.30AM – 6.15PM)
• Salary Package: Basic Salary up to $2,500 + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist in the installation, maintenance, and repair of marine equipment and systems, including engines, pumps, and other mechanical components.
• Support senior engineers in conducting routine inspections and diagnostics to ensure optimal performance and adherence to safety standards
• Maintain accurate records of maintenance activities, inspections, and repair work
• Prepare reports and documentation as required for compliance and operational needs
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• NITEC or Diploma in Mechanical Engineering, or a related field
• Knowledge of AutoCAD is an advantage
• Experience in prior O&G companies is a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71679 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Project Coordination:

* Assist in planning, scheduling, and coordinating project activities to ensure timely completion.

* Communicate with stakeholders, including contractors, suppliers, and team members, to ensure alignment on project goals.

Technical Support:

*Provide technical assistance to the Project Engineer or Manager.

*Interpret engineering drawings, specifications, and technical documents.

*Conduct site visits to monitor project progress and ensure compliance with design and safety standards.

Documentation and Reporting:

*Maintain accurate project documentation, including progress reports, meeting minutes, and project logs.

*Prepare reports on project status, highlighting risks, issues, and solutions.

Quality Assurance:

*Ensure that all work is carried out according to approved plans and standards.

*Assist in inspections and testing to confirm compliance with quality and safety regulations.

Procurement and Logistics:

*Coordinate with procurement teams for materials, tools, and equipment required for the project.

*Track deliveries to ensure they align with project timelines.

Cost and Budget Monitoring:

*Support the monitoring of project budgets and expenses.

*Prepare cost estimates and assist in managing financial resources efficiently.

Health, Safety, and Environmental Compliance:

*Assist in implementing safety protocols and procedures on-site.

*Monitor compliance with environmental and safety regulations.

Problem Solving:

*Identify and resolve technical issues that arise during the project lifecycle.

*Escalate significant concerns to the Project Engineer or Manager.

Skills Required:

*Good communication and interpersonal skills for coordinating with teams and stakeholders.

*Analytical thinking and problem-solving abilities.

*Attention to detail to ensure precision in documentation and execution.

Job Purpose

1. Overall in charge for all Planned Preventive Maintenance as well as Corrective

Maintenance works related to Track, Track Foundation, Trackbed and 3rd Rail System in

SMRT

2. Ensure all Line Maintenance works (PM & CM) are complied with approved quality

procedure, work instruction ( ISO 9002 Standard)

3. To achieve and maintain Key Performance Indicator set by Permanent Way Management.

Responsibilities

1. Responsible for all staff’s welfare, attendance, disciplinary matters, safety and maintenance

work matters.

2. To submit weekly maintenance programme to LM.

3. To prepare monthly report on team man-hours

4. To upkeep and maintain the office.

5. To coordinate with Chief Controller on all fault reports and arrange for proper deployment

to execute the work.

6. To plan out all Correction & Preventive Maintenance works and ensure it is carried out

promptly and comply to approved quality procedure and WIs.

7. To check, compile Daily Work Record submit by staff.

8. To conduct and brief staff on Toolbox briefing

9. To carry out project implementation as and when assigned by supervisor.

10. To perform PIC & PM roles.

11. To attend to Emergency work when call by Supervisor.

12. To assist LM on Track Quality report by :

- Reviewing and verify patrol reports.

- Assist with fault card

- Monitor and priorities assessment of track defect and quality.

- Input work request into Pway CM list.

- Monitor & coordinate work done in Pway CM list.

Job Requirements

1. Higher NITEC / NITEC / NTC preferably in Mechanical Engineering.

2. Preferably 3 years relevant working experience in technical work. Fresh graduates are welcome to apply.

Skills

1. Ability to work under pressure.

2. Self-motivated, resourceful and organized.

3. Able to work independently.

4. Possess strong interpersonal & communication skills.

5. Ability to communicate effectively in English, and work safely in a team with reference to the respective

6. Risk Assessments.

7. Experienced and confident in managing contractors.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Electrical Engineer
• Working Location: Cleantech Loop (Jurong West)
• Working Hours: 5 days (Monday to Friday 9AM – 6PM)
• Salary Package: Basic Salary up to $3,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Design and develop hardware for battery protection circuits, including choosing and controlling contactors and relays.
• Create and develop battery sensor circuits, focusing on circuit design, component selection, and testing/calibrating sensors for voltage, current, and temperature.
• Develop software for battery protection schemes in the Battery Management System (BMS), covering protections for over/under voltage, current, and temperature.
• Evaluate the battery's State-of-Charge (SoC) and develop the related firmware in the BMS.
• Research, compare, and select the appropriate microcontroller unit (MCU) to implement the BMS firmware.

APPLY NOW!!!

• Higher Nitec/Diploma in Electrical or Power Engineering, or equivalent.
• Experience in designing and testing BMS protection circuits.
• Firmware development skills for MCU in battery protection.
• Skills in designing and testing measurement circuits in BMS.
• Experience with sourcing and procuring electrical components.
• Skills in project planning and implementation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71570 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Assistant Engineer / Mechatronics Assistant Engineer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8am to 6pm)
• Salary Package: Up to $3000 + AWS
• Duration: Permanent Role

Key Responsibilities

• Perform electrical wiring including installation, servicing and troubleshooting of machine equipment
• Identify and document issues in assembly and testing phases
• Conduct on-site machine commissioning and client training
• Complete in-house automation machine assembly and wiring
• Analyze and solve machinery issues during testing and commissioning

APPLY NOW!!!

• ITE/Diploma in Engineering or related field
• Individuals without experience but with a keen interest in engineering are encouraged to apply

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66189 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Engineering (O&G)
• Position Title: Assistant Engineer
• Working Location: Pioneer
• Working Hours: 5 days (Mon to Fri 8.30AM – 6.15PM)
• Salary Package: Basic Salary up to $2,500 + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist in the installation, maintenance, and repair of marine equipment and systems, including engines, pumps, and other mechanical components.
• Support senior engineers in conducting routine inspections and diagnostics to ensure optimal performance and adherence to safety standards
• Maintain accurate records of maintenance activities, inspections, and repair work
• Prepare reports and documentation as required for compliance and operational needs
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• NITEC or Diploma in Mechanical Engineering, or a related field
• Knowledge of AutoCAD is an advantage
• Experience in prior O&G companies is a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71679 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Main Responsibilities:

• Participate to the automation of the deployment solution.
• Participate in environment preparation for testing phases.
• Participate in developing tools to simplify day-to-day activities on the program.
• Facilitate coordination between program developers and infrastructure engineers.
• Ensure continuous improvement and maintenance of the CI-CD pipeline.
• Provide investigation help while fostering knowledge and sharing best practices with team members.
• Document processes and ensure their properly followed.
• Ensure high standard delivery to production.

The position requires autonomy and reliability in performing duties while maintaining close communication with rest of project/support team.

Qualifications:

Mandatory

• At least 3 years in Software development or DevOps team.
• At least 2 years in Java/J2EE development
• At least 2-year experience with Jenkins, GIT (GitLab)
• At least 1-year experience in Ansible
• At least 1-year experience in GitLAb

Good to Have:

• Experience with DevOps methodology & tools like Jenkins, GIT (GitLab), Ansible, Docker/ Kurbernetes, CICD pipeline, Java dev context for the tooling, Database or Big Data storage systems, Grafana / Prometheus / Alert Manager / ELK / Kibana, Jira etc.
• Experience of grid computing.
• Basic understanding of finance and investment banking especially Market Risk.

Job Purpose

The Assistant Engineer’s job scope shall include leading a team of Technical Officer(s) to perform Preventive Maintenance (PM), Corrective Maintenance (CM), Overhaul (OH) and Engineering Support (ES) on all SMRT Thomson-East Coast Line (STEL) Trains, Depot and Workshop equipment so as to provide a safe, reliable and comfortable journey for our commuters.

Responsibilities

• Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.
• Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.
• Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.
• Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.
• Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.
• Ensure spares, tools and equipment used are in good condition and calibrated if necessary.
• Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.
• Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System
• Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.
• Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.
• Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.
• To support the group during incidents, accidents and emergencies.
• Ensure excellent housekeeping are maintained within all work areas.
• Maintain a high level of work discipline and standards.
• Perform any other task as assigned.

Qualifications & Work Experience

• Diploma in Electrical, Mechanical or Mechatronics Technology/ Engineering from a recognized institution.
• Preferably 5 year’s relevant experience in the railway environment.

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

- Up to $3,800

- Tuas

- With AWS + Variable Bonus

- Monday to Friday (8am to 5.30pm)

Responsibilities:

• Work on delicate Radar System for preventive and corrective maintenance on sites.
• Execute maintenance tasks within the committed TAT, Ops availability and good quality
• Liaise with customer for maintenance activities
• Perform maintenance activities and ensure tasks are performed accordingly to requirements
• Monitor and activate replenishment of consumables at reorder level
• Schedule and perform calibration of tools and equipment
• Provide inputs and prepare documentation required to complete job
• Manage inventory of authority furnished spares
• Perform housekeeping
• Response to customers’ requirements

Period:

• 1 Year Contract (Renewable)

Location:

• Tuas
• Shuttle Service to and from Tuas Naval Base at Joo Koon MRT (AM and PM)

Working Hours:

• Monday to Friday (8am to 5.30pm)

Salary:

• Basic Salary up to $3,800 (Depending on experience and qualification)
• Plus AWS
• VB (Subjected to individual and company performance)

Requirements:

• Diploma/ITC in Engineering in Electronics or equivalent
• Knowledge of EO/Radar maintenance experience would be advantageous
• Able to perform 24/7 stand by
• Physically fit and able to lift heavy loads
• Able to work at height and do not have height phobia
• Good team player and yet able to work independently.
• Valid Class 3 driving license would be advantageous.

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Registration no: R2198469)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Resource Centre Pte Ltd (EA License Number: 04C3201)

160 Robinson Road, #13-07/08/09 SBF Center, Singapore 068914

T: 6337 3183 | W: www.successhrc.com.sg

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as a:

Assistant Project Engineer (BMS)

Job description

• Must have relevant experience in Building Management System (BMS).
• Have strong knowledge in designing a system for BMS system.
• Able to manage project cycle independently with minimum supervision.
• Work with external parties and customers to plan, organize and direct activities concerned with assigned projects.
• Develop project schedules in compliance with customer requirements, deadlines, and/or milestones; develop mechanisms to track schedule progress in the field; and update the schedule regularly.
• Responsible for site activities, coordination and supervision works related to engineering and systems design.
• Ensure timely completion of all projects particularly the T/C schedules.
• Responsible for project management including attending meetings, coordination, design and plan out shop drawing and submission of documentation and supervision.
• Liaise with consultants, architects and contractors and handle all technical matters.
• Ensure project works compliance with Workplace Safety and Health (WSH) policies and practices.
• Attending site meeting and coordination with stakeholders, external parties and customers to plan, organize and other related activities for the assigned projects.
• As and when to take on new assignments.

Key Requirements

• Degree / Diploma in Engineering equivalent
• Minimum 2 years of relevant working experience
• Have full understanding of Instrumentation HVAC/ACMV control like AHU, Chillers, RCU etc.
• Knowledge of PLC programming (preferably Siemens PLC)
• Experience in SCADA software and strong knowledge of Industrial Control and Building Management System.
• Prefer relevant working experience; prefer with LTA ECS/LCS, TVS project experience.
• Prefer with IEC 61508 and LTA documentation submission.

Remuneration:

• $2,800.00 - $4,500.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to:

[email protected]

for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,800.00 - $4,500.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

Job Responsibilities:

• Liaise with the Main contractors on the planning and progress of M&E work to meet the project schedule
• Supervise M&E works to ensure it adhere to specifications, are completed on schedule, within budget, and accurately documented.
• Undertake additional tasks as required to support operational needs and project requirements.

Requirements:

• Background in M&E works. Diploma in Civil/Mechanical Engineering/ relevant on-job experience is a plus.
• Minimum 5 years of working experience in similar role within the construction industry
• Strong building M&E knowledge with hands-on experiences.
• Knowledge in design and building project and relevant code of practice.
• 6 day workweek. Shift work might be required during critical phase.
• Willing to work on-site