Total 2,916 Junior Executive quality assurance engineer job vacancies in Singapore

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Mon to Fri 9am to 6pm

Summary:

• Provide support and manage project

• Follow up with clients in timely manner

• Assist sales team with site survey & system design

• Provide onsite support to diagnose and rectify technical issue

• Outline budget based on requirements and tracking costs to deliver project on budget.

• Prepare detailed project plan to schedule key project milestones, workstreams & activities.

• Manage delivery of the project according to project plan.

• Track project and providing regular reports on project status to project team and key stakeholders.

• Manage and adjust for any changes in project scope, schedule and/or budget.

• Managing the relationship and communication with the client and all stakeholders, ensuring the project is delivered to their satisfaction.

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science / Information Technology

• At least 1 year experience in handling software projects

• Good understanding of programming , new technology trends / applications etc and with .basic cybersecurity & network knowledge.

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Good working attitude and self-motivated

Brilliant Engineering Pte Ltd

Office at LINK@ AMK

Service Engineers - 1 post

S$2600 to 3000 / month

Preferably with 3 to 5 years of relevant experience.

Job description

Overview

Brilliant Engineering Pte Ltd is a diversified engineering company specialise in providing MEP System Maintenance Services such as Air Conditioning, Electrical, Fire Protection & Plumbing system. Our list of Clientele ranges from Tourist Attractions, High Class Hotels, Retail shopping malls, Corporate MNC and Technology Companies and F&B restaurant.

Are you a dynamic, enthusiastic, and driven engineer looking to make a significant impact? Our company is seeking an energetic Assistant Service Engineer to join our team. In this role, you will be responsible for managing and engagement with a list diversified clients to carry out maintenance or A&A project work to the Engineering System.

Key Responsibilities:

- Key Point of Contact for the assigned clients.

- Ensure M&E Equipment are well maintenance to minimize downtime due to breakdowns.

- Preparation of Quotation for Repair & Project work

- Collaborate with team members to brainstorm, plan, and execute engineering projects.

- Utilize your technical expertise to solve complex problems and drive innovative solutions.

- Actively participate in all stages of M&E Project

- Demonstrate a proactive approach to learning and staying updated on industry trends and advancements.

- Effectively communicate with stakeholders to gather requirements, provide updates, and address concerns.

- Foster a positive and collaborative work environment by sharing knowledge and supporting team members.

- Provide Supervision to a Technicians and Supervisors, ensuring the high standard of deliveries in terms of service standard, best engineering practice and Safety

- Provide Supervision to the Engineering team to ensure they conform to BEPL’s standard in terms of Servicing, Repair and Project Works

- Management of Sub-Contractors in repair, new projects and new installation (if necessary)

Qualification

- Diploma in any Engineering discipline or related field.

- 3 to 5 years of experience in Facilities/Building Services or any relevant Mechanical & Electrical related field.

- Strong problem-solving skills and attention to detail.

- Excellent communication and interpersonal skills.

- Ability to thrive in a fast-paced, dynamic environment.

Technical Knowledge

- Will require the candidate to have Basic Technical Knowledge in the Mechanical and Electrical field, namely Air-Conditioning and Electrical Systems.

- Preferably with 1 to 2-years of relevant technical field application.

- Please submit your CV with current salary, expected salary and earliest join date. We do not consider if there is no salary details indicated in your CV.

• Attend site meetings, inspections, and monitoring of project progress with the Main Contractor.
• Ensure safe work procedures are implemented to control risk
• Other scopes of work to be assigned by the Managing Director
• Liaise with other departments to ensure information, materials or other resources to ensure project progress
• Any other tasks deemed necessary by the company related to the execution of projects

Work Week & Shift: 6 days, rotating shift

Location: Airfreight Terminal

Job Responsibilities:

• Plan, schedule and achieve workshop maintenance production for GSE and/or vehicles
• Manage in-house workforce, and/or outsourced contractor production/shift supervisors,
• and shift planning

Requirements:

• For those with Diploma, Assistant Engineer G4
• For those with Hi-NITEC/NITEC, Engineering Technician G3

Compensation:

• sign-up bonus of $5000
• annual wage supplement (AWS)
• allowances*
• overtime
• transport will be provided for working beyond midnight.

Job Description & Requirements

• Leading root cause analysis & corrective action in non-conformance investigation

• Establishing quality inspection plans, COC, procedures / work instructions / API testing

• Responsible for performing gap analysis on standards revision and revise procedure / work instructions

• Attend to customer/ supplier / internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent

• Min 1 year of working experience in Oil & Gas / Metal Machining Industry

• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

• Able to work 5.5 workdays

2. SKILLS

Web Testing

Tactics

Game Development

Strong Attention To Detail

MetaL

Unit Testing

Investigation

Root Cause Analysis

Quality Inspection

Machining

C#

Debugging

API

Mechanical Engineering

C++

Job Description:

1. Coordinating multiple projects with client.
2. Provide consulting services.
3. Develop the work scope as per client's requirements and generate quotation.
4. Oversee daily operation of the department and assist in deployment.
5. Review of reports/ Assist in preparation of reports to meet client's specification / requirement.
6. Follow up invoices & payment by client.
7. Attend management meeting / safety meeting / client meeting as and when required.
8. Other ad-hoc duties as assigned by supervisor.

Job Scope:

• Assist in the design, development, and testing of mechanical systems and components
• Support the assembly of mechanical systems, ensuring alignment with specifications and quality standards
• Collaborate with engineers to improve and troubleshoot mechanical designs
• Conduct inspections and quality checks on assembled parts and systems
• Prepare and update technical documentation, including assembly instructions and reports
• Assist in the assembly and integration of mechanical components into final products
• Perform mechanical testing, collecting data and providing analysis for continuous improvement
• Support in the selection and procurement of materials for mechanical assemblies
• Coordinate with production teams to ensure timely and accurate assembly of components
• Provide technical support and troubleshooting during the assembly process
• Maintain and organize engineering tools, equipment, and assembly areas
• Ensure compliance with safety and industry regulations during the assembly process
• Assist in the development of prototypes and new product designs.

Requirements:

• Nitec / Higher Nitec / Diploma in Mechanical Engineering
• 2 to 3 years of relevant experience
• Knowledge of industrial automation, jigs and fixture design, FMEA, SPC, CAD, and machine design is a plus
• Strong project management skills and self-disciplined
• Good interpersonal and communication skills
• Willingness to travel when necessary

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

☑ Visual Inspection experience on groceries

☑ Boon Lay MRT

☑ 5.5 days, Mon-Fri 7am-4pm/Sat 7am-11am

Interested applicants, kindly send your UPDATED resume in MS WORD format to ref9 at trustrecruit.com.sg or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Xue Fen

EA Personnel Reg No: R1653801

• Singapore Based (Gul Crescent - Company Transport @ Chinese Garden, Lakeside, Boon Lay)
• Monday to Friday: 8.15am - 5.45pm
• Diploma in electrical and electronic or mechatronics engineering; min 3 yrs experience
• Career Progression Opportunities

Job Description:

• Must be able to perform troubleshooting on various electrical circuitry
• Engine and hydraulic knowledge with 2 years working experience in automobile industry (Electrical & Mechatronics) will be an advantage
• Assist Service Manager to manage the service department
• Able to lead a team of technicians and engineers to provide excellent service support

Requirements:

• Minimum Diploma in electrical and electronic or mechatronics engineering
• Posses Class 3
• Min 3 yrs experience

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Summary

• Basic up $2,500 - $3,500 (Based on experience)
• 5day work, Office hours
• Island Wide

Job Scope:

• Conduct onsite inspections and troubleshoot technical issues at clients' premises.
• Perform hands-on preventive maintenance, repairs, and installations of equipment.
• Diagnose errors and technical problems to determine and implement effective solutions.
• Carry out testing and commissioning of systems and equipment.
• Coordination work on and off site
• Collaborate with engineers on project management, equipment installation, and maintenance services.
• Handle ad-hoc tasks and other duties as assigned by the company

Job Requirement:

• Diploma/Degree in Electrical or related engineering studies
• Entry level is welcomed, full training will be provided.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Yong Pei Pei (R24124478)

Job Title for Posting

Assistant Laser Ablation Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 8.30am - 5.30pm / 2:30pm - 11:30pm / 9:00pm - 6.00am.
• Prepares substrates/precursors, loads samples, in charge of laser ablation process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

Job Title for Posting

Assistant Process Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 1:00pm - 10:00pm
• Prepares substrates/precursors, loads samples, in charge of coating process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Electrical Engineer
• Working Location: Cleantech Loop (Jurong West)
• Working Hours: 5 days (Monday to Friday 9AM – 6PM)
• Salary Package: Basic Salary up to $3,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Design and develop hardware for battery protection circuits, including choosing and controlling contactors and relays.
• Create and develop battery sensor circuits, focusing on circuit design, component selection, and testing/calibrating sensors for voltage, current, and temperature.
• Develop software for battery protection schemes in the Battery Management System (BMS), covering protections for over/under voltage, current, and temperature.
• Evaluate the battery's State-of-Charge (SoC) and develop the related firmware in the BMS.
• Research, compare, and select the appropriate microcontroller unit (MCU) to implement the BMS firmware.

APPLY NOW!!!

• Higher Nitec/Diploma in Electrical or Power Engineering, or equivalent.
• Experience in designing and testing BMS protection circuits.
• Firmware development skills for MCU in battery protection.
• Skills in designing and testing measurement circuits in BMS.
• Experience with sourcing and procuring electrical components.
• Skills in project planning and implementation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71570 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• At least 3 years in Software development or DevOps team.

• At least 2 years in Java/J2EE development

• At least 2-year experience with Jenkins, GIT (GitLab)

• At least 1-year experience in Ansible

• At least 1-year experience in GitLAb

Good to have

• Experience with DevOps methodology & tools like Jenkins, GIT (GitLab), Ansible, Docker/ Kurbernetes, CICD pipeline, Java dev context for the tooling, Database or Big Data storage systems, Grafana / Prometheus / Alert Manager / ELK / Kibana, Jira etc.

• Experience of grid computing.

• Basic understanding of finance and investment banking especially Market Risk.

Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

Assistant Project Engineer
$2,300 to $3,300
5 days
9am-6pm
Office location: Bukit Batok
Working location: Singapore Islandwide - Client site

Project planning, cost control and execution. Supervision of work at site. Other special works as assigned by supervisor from time to time. Assume responsibility for the successful completion of the projects and meet customers satisfaction.

Job Duties:

• Plan work schedule for the project under responsibility, in coordination with supervisor
• Coordinate and monitor work progress with customers and relevant parties for information to expedite installation
• Supervision of work at site
• Schedule purchase and deliveries of all materials for the project in a timely manner
• Check and ensure all installations conform to project specifications
• Update projects progress regularly supervisor
• Assign task and supervision of System applications, drafting, database generation and commissioning
• Identify and secure variation order
• Cost control. Monitor and ensure delivery of financial commitment as per CIS
• Ensure that all work completed are filed and invoiced
• Follow-up on payment from customers and verify payment to our suppliers
• Train customer and provide first year maintenance warranty schedule visit
• Hand over project to customer and later to service team
• Perform regular quality audit for all the suppliers and sub-contractors Qualifications

Job Requirement:

• Degree, Diploma/ ITE or 3 years relevant work experience in Building automation system
• Relevant experience in Building Services/BMS/BAS/Controls/M&E or construction
• Excel, Word and Project essential
• Need to work odd hours as and when required, whenever the work need to be done on time.

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Assistant Engineer, Production Process Support is responsible for running engineering evaluations, collecting and compiling of data with simple analysis, and part measurements. The incumbent will also manage change order (CO) activities as well as non-conformance part movements.

This position reports to the Production Process Support Manager and is part of the Manufacturing Engineering department located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Assist in running engineering evaluations
• Perform basic statistical analysis
• Understand and apply the process flow of non-conformance material and product change action

The essential requirements of the job include:

• Diploma/NITEC in Mechanical Engineering
• Relevant experience in lean manufacturing

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives.

COMPANY DESCRIPTION

1-Net manages carrier-neutral Internet Data Centers, along with providing a comprehensive range of integrated services including network connectivity, managed services, work area recovery suite, cloud and media delivery services. 1-Net's Data Center Corridor initiative currently interconnects key data centers in Singapore to facilities quick deployment and providing a diverse connectivity options for enterprises and service providers.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

1-Net is fast transforming itself into Asia's Data Centre of Choice. As one of the pioneers in broadband development in Singapore, 1-Net currently manages telco-class carrier-neutral Internet Data Centres, along with providing domestic and international connectivity, managed services and media delivery services. 1-Net offers superior stability, secure delivery and service experience through its services. It's uniquely positioned in Southeast Asia, with a comprehensive range of integrated services and a media-centric approach to bring cutting edge solutions to its customers.

Responsibilities

• Manage the maintenance and daily operations of the DC facilities with the objective of achieving uninterrupted availability at all times and to ensure the fulfillment of our service commitment to customers.
• Support service delivery to ensure contracted service level agreements and key performance indicators are met or exceeded.
• Perform routine facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, HVAC outages. Analyze data and identify trends with facility issues to determine root cause and take appropriate action.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects of data center operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 data center operation to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Support for customer installations, in coordination with the design & construction as well as operations requirements to coordinate customer move-in and turn-on, and other service request & deliveries.
• Maintain compliance with local workplace safety & health (WHS) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP), method of procedures (MOP), and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participate in the scheduling, coordination and completion all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Support various accreditation, certification and compliance initiatives such as BCA-IDA Green Mark DC/QMS/ISMS/BCMS/PCIDSS/OSPAR, etc as may be required.

• ITE/Diploma in Electrical or Mechanical engineering or equivalent qualification
• No experience required as training will be provided
• Must be willing to learn
• Able to resonate with our culture of Respect, Teamwork, Drive
• 24x7 rotating shift duty
• Able to comprehend, analyse and interpret complex project documents, including AutoCAD, Visio and PDF documents
• General technical and functional knowledge of data center infrastructure to include electrical and mechanical systems, fire detection and protection systems, building management systems, equipment maintenance, space planning, construction of critical facilities environment
• Working location: 1-Net (East) at Chai Chee / 1-Net (North) Woodlands

We are seeking a skilled and motivated Data Engineer with expertise in Hadoop, Spark, OpenShift Container Platform (OCP), and DevOps practices. As a Data Engineer, you will be responsible for designing, developing, and maintaining efficient data pipelines, processing large-scale datasets. Your expertise in Hadoop, Spark, OCP, and DevOps will be crucial in ensuring the availability, scalability, and reliability of our ML Solutions.

Your main responsibilities will include:

• Implement data transformation, aggregation, and enrichment processes to support various data analytics and machine learning initiatives
• Collaborate with cross-functional teams to understand data requirements and translate them into effective data engineering solutions
• Ensure data quality and integrity throughout the data processing lifecycle
• Design and deploy data engineering solutions on OpenShift Container Platform (OCP) using containerization and orchestration techniques
• Optimize data engineering workflows for containerized deployment and efficient resource utilization
• Collaborate with DevOps teams to streamline deployment processes, implement CI/CD pipelines, and ensure platform stability
• Implement data governance practices, data lineage, and metadata management to ensure data accuracy, traceability, and compliance
• Monitor and optimize data pipeline performance, troubleshoot issues, and implement necessary enhancements
• Implement monitoring and logging mechanisms to ensure the health, availability, and performance of the data infrastructure
• Document data engineering processes, workflows, and infrastructure configurations for knowledge sharing and reference
• Stay updated with emerging technologies, industry trends, and best practices in data engineering and DevOps
• Provide technical leadership, mentorship, and guidance to junior team members to foster a culture of continuous learning and innovation to the continuous improvement of the analytics capabilities within the bank

• ·Bachelor's degree in Computer Science, Information Technology, or a related field
• Proven experience as a Data Engineer, working with Hadoop, Spark, and data processing technologies in large-scale environments
• Strong expertise in designing and developing data infrastructure using Hadoop, Spark, and related tools (HDFS, Hive, Pig, etc)
• Experience with containerization platforms such as OpenShift Container Platform (OCP) and container orchestration using Kubernetes
• Proficiency in programming languages commonly used in data engineering, such as Spark, Python, Scala, or Java
• Knowledge of DevOps practices, CI/CD pipelines, and infrastructure automation tools (e.g., Docker, Jenkins, Ansible, BitBucket)
• Experience with Graphana, Prometheus, Splunk will be an added benefit
• Strong problem-solving and troubleshooting skills with a proactive approach to resolving technical challenge
• Ability to manage multiple priorities, meet deadlines, and deliver high-quality results in a fast-paced environment

Job Description:

• Deliver technical design of CNC solutions for customize specification.
• Produce 2D&3D engineering drawings using Solidwork and CATIA.
• Analyze existing systems and improve designs.
• Conduct technical design review and evaluation to ensure compliance to standards.
• Documenting the design process, iterations for fabrication.
• Perform other duties as assigned.

Job Requirement:

• Good interpersonal and communication skill
• Proficiency with engineering design programs such as AutoCAD, Solidworks
• Knowledge of design and engineering principles
• Attentive to detail and critically minded
• Welcoming fresh graduate from mechanical engineering

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Assistant Engineer / Mechatronics Assistant Engineer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8am to 6pm)
• Salary Package: Up to $3000 + AWS
• Duration: Permanent Role

Key Responsibilities

• Perform electrical wiring including installation, servicing and troubleshooting of machine equipment
• Identify and document issues in assembly and testing phases
• Conduct on-site machine commissioning and client training
• Complete in-house automation machine assembly and wiring
• Analyze and solve machinery issues during testing and commissioning

APPLY NOW!!!

• ITE/Diploma in Engineering or related field
• Individuals without experience but with a keen interest in engineering are encouraged to apply

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66189 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Our esteemed client, an established MNC, is searching for a Facility Assistant Engineer:

Job Responsibilities

• Overhaul, preventive maintenance, corrective maintenance
• Monitor equipment operating condition and record in the checklist
• Making of DI water & treatment of wastewater including maintenance
• Changing of H2 LPG cylinder and monitor N2 consumption
• Maintenance of RTO solvent pumps & room pressure condition
• Maintenance of Last IC Air-Con, Compressors, Vacuum & Exhaust system
• Maintenance and repair of general breakdowns such as toilet taps, floor tiles, painting, etc.

Job Requirements:

• Min Higher Nitec/Diploma in Engineering (Electrical/Electronic/Mechatronic/Electromechanical) or equivalent.
• Min 1 or 2 Years of working experience in the related field is required.
• Able to work 12 hours rotating shift (morning and night).

Additional Information:

• Salary: Up to SGD 3,400 +Shift & OT Allowance +AWS +VB (Around 2 Months)
• Working Location: North
• Working Days: 4 days work

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)