Total 1,204 Others/Any quality assurance specialist job vacancies in sgp singapore singapore 50 tuas west dr

Job Descriptions:

• Management of CAPA from tracking, including follow-ups and closure.
• Management of Change Control, Deviations, from tracking, follow-ups and closure.
• Review quality process control plan, drive quality issues to root cause, corrective actions and improvements.
• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Coordinate and assists during customer visits and audits.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Review the implementation and efficiency of quality and inspection systems.
• Collect, compile statistical quality data, and analyze data to identify areas for improvement in the quality system.
• Review of analytical reports, and batch records (manufacturing and packaging).
• Perform SAP QM setting, review test results, block / unblock of finished products.
• Manage customer queries, customer satisfaction surveys, and questionnaires and other quality / regulatory purpose documentation requests.
• Investigate customer complaints and non-conformance issues.
• Consolidate data to create the annual product quality review report.
• Track quality performance and initiate quality improvement plans.
• Perform risk assessments and monitor risk management activities at quality level.
• Conduct /perform training to employees to improve GMP / international standards certification awareness and compliance.
• Perform any other duties and responsibilities as assigned from time to time.

Job Requirements:

• Minimum 2 years related work experience
• Possess experience in internal audit, validation activities, training management and batch release for API with good background on cGMP

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At Pall Corporation, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As a global leader in high-tech filtration, separation, and purification, Pall Corporation thrives on helping our customers solve their toughest challenges. Our products serve diverse, global customer needs across a wide range of applications to advance health, safety and environmentally responsible technologies. From airplane engines to hydraulic systems, scotch to smartphones, OLED screens to paper—everyday Pall is there, helping protect critical operating assets, improve product quality, minimize emissions and waste, and safeguard health. For the exponentially curious, Pall is a place where you can thrive and amplify your impact on the world. Find what drives you on a team with a more than 75-year history of discovery, determination, and innovation.

Learn about the Danaher Business System which makes everything possible.

Are you a person who enjoys making positive, tangible changes that improve the overall quality of a product or process? Do you have a passion for leading quality systems and processes? Are you customer oriented? If so, then maybe you would be a great fit for our Director Quality Director Quality Assurance - Microelectronics/APAC.

This position is part of the Quality and Regulatory Affairs department and is an onsite position.

In this role, you will have the opportunity to:

• Develop positive relationships with Key Customers, OPS team and Commercial Leaders
• Develop and implement Micro Electronics Industry leading quality systems and processes to support customer needs and expectations.
• Establish and handle QA tracking and trending of crucial performance measures (DPPM) and the preparation of periodic reports for management review.
• Implement and maintain an effective quality management system for Micro-E specific plants and aligned to corporate and BU policies, procedures, and industry specific requirements.

The essential requirements of the job include

• University Degree in mechanical/electrical or chemical engineering with a minimum of 10 years of dynamic quality assurance experience, with at least 5 years at senior level with multi-site and multi-region experience
• Thorough understanding of ISO 9001 standard. GMP knowledge and other ISO standards required.
• Fully conversant with AIAG Core tools, APQP, statistical analysis and the principles of variation reduction.

• Marine Electrical Equipment (MNC company)
• Basic $3000 - $4000
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspection & Quality Control: Perform incoming and outgoing inspections according to established procedures, including factory routine tests and official tests for switchboards. Ensure that non-conforming products are separated and rejected as necessary.
• Quality Documentation: Maintain quality records and file data. Highlight quality issues to the appropriate management for action.
• Authorization & Release: Authorize the rejection of unsatisfactory parts and the release of conforming parts for storage and customer delivery.
• Customer Satisfaction & Warranty: Ensure the successful testing and commissioning of switchboards on-site or on vessels, and address warranty claims or customer quality complaints.
• Problem Prevention & Solutions: Initiate actions to prevent non-conformities, recommend solutions, and verify their implementation.
• Safety, Calibration & Housekeeping: Follow safety rules, use calibrated instruments for inspections, maintain good housekeeping in the QA department, and assist the manager in meeting quality objectives.

Qualifications

• Min ITE/ Diploma in Electrical Engineering
• At least 2 years of QA experience

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Responsibilities:

• Perform quality control checks and generate QC/Halal reports for incoming and outgoing products to ensure that they meet quality and safety standards in accordance to SFA and MUIS regulations

• Perform sensory evaluation for incoming raw materials to ensure consistent quality and for product improvement

• Conduct quality control and Halal inspection for customer feedback

• Provide technical and quality related assistance to other departments, assist in marketing department’s recipe, videos and photo shoot when required

• Perform regular internal and external product quality control and monitor their quality so as to provide timely feedback to category/supplier for improvement

• Compile/archive QC/Halal report related documents

• Assist to maintain, source and purchase QC equipment and consumables when required

• Assist in product development or product improvement sensory evaluation preparations when required

• Assist sales or other departments with product specification, certification and quality related document requests

• Assist to liase with Halal/FSSC/ISO Authority on inspection and renewal of Related Certification.

• Assist on planning and executing Audit schedules

Requirements:

• Minimum Diploma in Food Science, Food Technology or related disciplines

• At least 2 years of relevant working experience in the food industry QC/R&D environment and familiar with ISO/FSSC 22,000 and Halal certifications

• Possess good interpersonal skills, self-motivated & methodical

Independent & a team player

• Proficient in Microsoft Office (Word, Excel & PowerPoint)

• Possess basic cooking skills

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

· Conduct Microbe Test & Physico-chemical Test

- Shelf life study

- Online Testing

· Prepare sensory samples for sensory tasting

· Daily calibration of laboratory equipment

· Inventory update and clearing of References and Retention samples

· Maintenance of lab equipment

· Fill up QC record forms

- Finished Product Analysis Record Form

- Raw Material Evaluation form

- Daily Sieve Physical Contamination Check & Equipment Cleaning and Sanitation Record

· Document filing

· Sample Labelling

· Data Entry into Computer System

- Incoming Record

- Microbe & Physico-chemical Record

- Inventory update

· Key in physical and microbe data

· Preparation of solutions for lab use

· Ensure the cleanliness and orderliness of the physical lab and microbe lab, and washing of lab wares.

· Any other appropriate duties and responsibilities as assigned by the Management.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma in Civil Structural Engineering or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Summary of Job Scope:

Responsible for technical enhancement of quality control and analytical development in QC Laboratory functions.

• Work allocation and arrangement for daily QC routine work
• Finish Product Quality Control
• Checking Report of "In-Process control of Tablet"
• In process quality control of intermediates (IPQC)
• Review and evaluation of Analyst test report and data to ensure test result is up-to date and accurate.
• Review and ensure QC Records and BMR are up-to-date, complete and accurate.
• Supervision of quality control check on raw material dispensing
• Management, Monitering and testing on sample.
• Monitor retained samples and waste of tested sample of intermediates and finished products.
• Environment monitoring and recording for retention sample room.
• Supervision and training of laboratory technicians and laboratory assistant and chemist in carrying out their duties.
• Responsibe to revise of SOP for IPQC and FPQC and relevant section.
• Verify and approve test result in absence of QC Manager.
• Calibration of laboratory equipment and apparatus.
• Ensure Good Laboratory Practice (GLP) & Lab Safety.
• Optimization of usage of laboratory equipment.
• Support in the investigation and management of product complaints.
• Participate in process and cleaning validation.

1. Able to read and understand technical drawings.
2. Must able to do Mitutoyo CMM Programming and Operation.
3. Ensure incoming materials, in-process production and finished products meet by confirm specifications requirements; conducting visual and measurement tests.
4. Follow up corrective actions in production
5. Documents inspection results by completing reports and logs; inputting data into quality database.
6. Able to perform final inspection report for finished products and prepare relevant documents to customer.
7. Evaluate and analyze customers rejections, implement and feedback corrective action.

• At least 5 years' experience in Quality Control
• Basic Computer knowledge to prepare Quality Documents Report
• Able to speak, write and read simple English
• Able to work independently with minimum supervision

The Quality Governance Lead is responsible for overseeing and ensuring the consistency, accuracy, and reliability of financial, project, and operational data across the organization. This role involves developing and managing dashboards, early alerts, and quality governance reporting, as well as driving corrective actions based on key project and financial indicators. The lead will work closely with PQE lead, Quality Leads, SBG Quality Council Leads/members, LOB leads, Delivery Lead, Client Service Leads, Client Delivery Leads, project managers, finance teams, and senior leadership to ensure quality control and mitigate risks. This role ensures that the organization maintains a proactive, data-driven approach to quality governance, driving transparency, accountability, and risk mitigation across all projects.

What will you do? 

1.    Dashboards and Early Alerts:

• PowerBI Dashboards: Develop and maintain interactive dashboards using PowerBI to track key project and financial metrics.
• Early Alerts: Establish systems for early alerts regarding critical issues such as:
  • Missing or inaccurate forecasts (ETC)
  • Manpower cost trending anomalies
  • Consistent variance between actuals and forecasts (Day 2)
  • Past fiscal year trends vs current forecasts (Day 2)
  • High unbilled revenue
  • Aging receivables and poor collection trends
  • EAC (Estimate at Completion) margin erosion and activate Watchlist
• AI Exploration: Explore and implement AI-driven models to predict potentially troubled projects and identify areas for intervention.

2.    Watchlist Management:

• Develop and manage the Watchlist for at-risk projects or financials, categorizing them into:
  • Orange (High attention needed)
  • Red (Immediate action required)
  • BRC - Projects need budget revisions
• Provide regular updates and insights to PQE lead and Global Service Lead and other stakeholders regarding projects on the Watchlist and recommend corrective actions.

3.    Quality Governance Reporting:

• Monthly Business Review (MBR): Oversee the preparation of MBR reports, delivering key insights into project status, financial performance, and emerging concerns.
• Quarterly Business Reviews (QBR): Lead the preparation of QBR reports, providing insights into project health, financial performance, and areas of concern.
• Audit and Risk Committee (ARC): Provide detailed reporting and analysis to the ARC on project and financial performance, including risk mitigation and governance practices.
• Board Reporting: Prepare concise, impactful reports for the Board, focusing on critical project and financial health indicators, trends, and risks.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Quality Inspector (Jurong East)

working hours: 5 days - 8am - 5.30pm + evening/ weekend OT

base salary + OT pay + 1 month AWS + company shuttle bus (no VB)

Focal point for inspection queries and scheduling of inspection activities. Ensures conformance of materials, purchased parts and manufactured parts in alignment with quality control plans, specifications, processes and standards. Adds value by ensuring products and services are delivered in compliance with customer expectations.

Job Responsibilities:

• Unboxing, unwrapping and preparing of items for inspection.
• Execute in process and/or final inspection of materials, purchased parts and manufactured parts to ensure conformance with quality control plan, procedures, documentation and standards.
• Review and ensure manufacturing work orders and associated documentation is completed and processed correctly in a timely and efficient manner.
• Monitor and ensure callibration of equipment, work areas are kept clean and appropriate PPE and best practice lifting practices are adhered to at all times.
• Prioritise inspection activities in alignment with delivery objectives.
• Effectively communicate non conformance issues to engineering / production expedites solutions as necessary to support delivery objectives.
• Attending production meetings.
• Completing of non scheduled urgent inspection tasks within the completions business.

SKILLS & QUALIFICATIONS:

• Comfortable working at Penjuru, Jurong East area. Company shuttle service provided
• Min NDT/ NDE/ SPM/ secondary education level
• 1-2 years' experience in manufacturing facility/ quality inspection/ industrial/ engineering
• Experience in manufacturing workshop processes and controls.
• Competent is reading and understanding engineering drawings, processes and procedures.

The role of EHS Specialist / Senior EHS Specialist to cover our sites at Tuas view, Ave 20 lab, Ave 8 Warehouse, TCM Micron and TCM Siltronic.
Objective is to ensure all sites are meeting regulatory requirements and EHS programs are implemented across the sites.

Position Purpose:

The purpose of the position is to:

• Ensure that corrective actions are taken for all findings and observation, and incidents are investigated thoroughly to identify the root cause.
• Support arranging statutory medical examination and training requirement.
• Review risk assessment and facilitate internal ISO 45001, 14001 and SS651 audits.
• Lead the Company emergency team and facilitate necessary audit and training.

Major Position Responsibilities:

• Develop and implement EHS program and EHS Culture initiatives for facilities.
• Conduct audits and inspection to identify the potential hazards and ensure corrective actions.
• Ensure compliance with local EHS legislation and company internal requirements.
• Ensure EHS programs are align with corporate EHS policies, objectives & targets, ISO14001, ISO45001 and SS651 requirements.
• Collaborate with cross functional teams to promote EHS best practices and lead the risk assessment for the facility.
• Lead the Certified Emergency Response Team (CERT) requirements in all the facilities (incl routine inspection, training, and audit)
• Lead in workplace incident investigation and Root Cause Analysis (RCA) to ensure corrective and preventive actions are adequate.
• Support Industrial Hygiene and Environmental monitoring activities in the plants, labs and warehouses.
• Drive ‘green’ environmental initiatives, ergonomic projects, and continuous improvement projects in the facilities
• Identify training requirement and conduct/ arrange necessary training.

Performs other duties as assigned by Senior EHS Manager

Qualifications and Experience:

• Bachelor’s degree or Diploma in related field (safety, environmental, chemical engineering, or equivalent).
• 3-5 years of experience, preferred experience in electronic, semiconductor, chemical, pharmaceutical industry, or similar manufacturing environment.
• Proficient in Microsoft Office & Teams.
• Good knowledge of Singapore environmental, occupational safety and health regulations.

Skills and Abilities / Core Competencies and other information:

• Business – Able to work across functional areas and levels of the organization, project team organization and building, problem recognition and solving.
• Behavioral – Positive attitude, Proactive, Self-motivated and ability to work with limited supervision, strong written and oral communication skills.
• Able to differentiate color for work purposes
• Liaise and coordinate with different functional departments and members.

Candidates with more than 5+ years of experience may be considered for Senior EHS Specialist Position.