Total 68,492 Full-time quality manager job vacancies in Singapore

Responsibilites:

• To plan, develop and implement the organizational strategy and framework for patients’ relations and positive experience in the patients' journey of care
• To oversee and be responsible for the communications and patients’ relations matters of through befriending and building of a strong rapport with the patients and their family.
• To collaborate with HODs and line staff to operationalize the patients experience strategy.
• To provide expertise and resources in educating the Head of Departments and line staff in the philosophy and techniques of patients experience improvement.
• To set benchmarks/targets for evaluating the effectiveness of the patients’ relations services and programmes for the purpose of continuous improvement.

Principal Responsibilities

1) Patients Relations Engagements

• To establish contact with patients and their family (next-of-kin or spokesperson or designated caregiver) at the point of referral (hospital tour) or upon admission to the wards.
• To be the point person of the hospital for the patients and their family.
• To implement workflow to ensure a positive experience at every touch point with patients and their family.
• To identify caregivers stress and discern sensitive issues and offer counsel/suggestions to solve the problem or to handle the situation.
• In any crisis situation to advise and support the Head of Department and the staff on the appropriate approach and action to be taken to diffuse anger and tension, at the same time relate to the patient and his/her family to offer empathy and counselling, where necessary, to calm the situation. Offer practical solutions and support to the patient and the family where caregiver stress has been identified.
• Identify and assist/support staff andHead of Departments who are struggling with patients’ relations and communication issues.
• To supervise, train and mentor the team of Ward Ambassadors who are part of the Patients Relations Team.
• To review and assist in handling feedback and complaints received through the Patients Feedback Form with appropriate (verbal/written) responses.

2) Patients Experience Programmes

• To work with Corporate Communications, Pastoral Care Services and Nursing in organizing patients’ engagement events.
• To develop programmes and events to promote patients’ engagement and improve patients experience.

3) Family/Caregivers Engagement

• To proactively identify caregivers stress and engage caregivers in conversations for the purpose of offering empathy and support, solutions and resources that will enable them to cope better.
• To collaborate with external agencies like Caregivers Alliance in supporting the caregivers and post discharge follow up.
• To participate in ward processes relevant to patients’ relations and experience.

Secondary Responsibilities

• To provide training in dementia care to staff as well as to caregivers.
• To carry out duties and responsibilities that may be assigned from time to time.

Job Requirements

• min. Diploma/Degree in Public relations, Communications and Counselling related field of study
• Prior 3-4 years of relevant working experience in hospitality or healthcare public relations or caregiver support and counselling.
• Minimum 4-5 years relevant experience in a managerial role.
• Prior 2-3 years of patient relations work experience from Healthcare/Social Service industry
• Has excellent interpersonal and communication skills.

Interested applicants, please email your updated CV to [email protected] or WA 97527630 for more information.

We regret to inform that only shortlisted candidates will be contacted.

EA Personnel No: R23116144

EA Personnel Name: Lim Ruo Yi, Rachel

Company Registration Number: Recruit Express Pte Ltd (99C4599)

(EAST REGION) - UBI

Highlights:

• Fully hunter role
• More focus on sea freight
• Dont need lead team

Job Description:

• Identifies, develops, and retains new business relationship
• Maintains relationship with customers by providing support, information and guidance
• Follow up on sale leads, close sales contracts, invoice and payments
• Canvass and secure new accounts
• Responsible for B2B sales account management and customer satisfaction

Requirements:

• Experience in Logistics & Supply Chain (preferred with Global and local sales in the Freight Forwarding industry)
• Achieve sales objective
• Able to work independently with pro-active attitude
• Possess strong hunter mentality, business sense and industry expertise
• Successful experience in identifying, qualifying and closing new businesses
• Good presentation skills

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

• Well Established Company
• Basic $5000 - $8000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• Working days: Monday to Friday
• Working hours: 8am to 5pm

Job Responsibilities:

• Develop and implement department procedures, ensuring compliance with safety regulations and standards
• Oversee and coordinate the daily engineering operations, including conducting routine inspections and maintenance of machinery
• Manage the maintenance budget, ensuring efficient allocation of resources
• Supervise engineering staff, including hiring, training, and performance management
• Prepare preventative and maintenance schedules
• Identify and address potential issues before they result in equipment failure or downtime
• Collaborate with other departments to prioritize maintenance needs and manage work orders
• Manage inventory of maintenance equipment
• Prepare and present reports on maintenance operations and costs
• Keep abreast of advancements in maintenance and repair technologies

Requirements:

• Bachelor’s degree in Mechanical Engineering
• Min 5 years of relevant working experience and knowledge
• Strong planning, people management, analytical and problem solving skills

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Service Delivery Manager (CyberSecurity)/ Customer Manager

Responsibilities:

• Strong in handling Service Delivery Management/ Customer Management
• Experience in providing Services and Solutions on CyberSecurity Management.
• Technically inclined in handling Service Delivery and supporting Customer Management.
• Manage the performance of services and ensure that Service Levels are met.
• Engaging the customer and/or vendors to ensure the smooth delivery of services when required
• Communicate and liasing with clients, stakeholders and vendors.
• Provide consultation and advisory on CyberSecurity Solutions.

Requirements:

• Demonstrated strong experience in handling Service Delivery Management/ Customer Management.
• Experience in providing CyberSecurity Services and Solutions to customers.
• Strong knowledge of CyberSecurity.
• Relevant Cybersecurity Certifications such as CISM, CISSP, GCIH, GNFA, CCSK, CRIST will be an added advantage.
• Familiar with Kill Chain methodology, MITRE Att&ck, NIST Cybersecurity Framework, ISO 27001 and etc.
• Minimum 3 years of experience in customer success roles or experience in a cybersecurity operation center
• Good in Service Delivery and Customer Management.
• Experience in handling Service Level Agreement (SLA).
• Possess Government or System Integrator Consulting domain.
• Experience with contract and vendor management.
• Possess Diploma or Degree in relevant field.
• Only Singaporean applys.

If you feel that you have the skill-sets that we are looking for, please apply in-confidence with an updated MS Word Resume to [email protected]

We respect your privacy and all communication will be treated with confidentiality.

*Only shortlisted candidate will be notified.

Yong Zhehan @Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Summary

As a District Manager, you will be in charge of managing & leading an assigned district, achieving sales, profitablity & inventory targets. In addition, you'll oversee. coach & direct activities of Store Managers in the achievement of business objectives and efficient & effective store operations.

Responsibilities

• Ensure Retail Marketing plans are executed seasonally – aligned with brand marketing plans.
• Work in accordance with Regional and Local VM standards and execute the look-and-feel of the store as pre-agreed.
• Conduct regular store visits (4 to 6 stores depending on sales volume), preparing reports and taking corrective measures to drive business growth.
• Manage and monitor store budgets to meet profit objectives.
• Build and maintain a strong team of Store Managers through effective hiring, development, training, and staff retention programs.
• Ensure high standards of store operations are met at all times, providing consumers with a high-quality shopping and brand experience.
• Work closely with Merchandising Team in stock allocation and planning.
• Achieve an overall stock turn as per company target.
• Ensure product selection for all stores is based on grades/ bands that reflect consumer profiles, competitive landscape, and store formats.
• Loss prevention a key operational discipline.
• Managing all outlets budgets and ensuring that each store operates within the budget.
• Monitoring each store's P&L reports.

Requirements

• Min Diploma
• With 5 years of working experience in the related Retail / Sports/ Fashion, a minimum of 3 years of people management.
• Passionate in customer service and a strong communicator.
• Strong organization skills, analytical and detail-oriented.
• Strong application of MS Excel preferred and other office software.
• Fast-paced, hands-on work style.
• Comfortable to work beyond office hours and weekends/Public Holidays to manage stores activities.

Interested applicant, please submit your application now.

We regret that only shortlisted candidates will be notified.

EA License No.: 23C1461

EA Reg. No.: R1108264

By submitting your personal information and/or resume, you are deemed to consent to CareerVisors Pte. Ltd. to collect, use and disclose your personal information and/or resume to prospective employers/companies for the purposes of employment.

Job Description:

• Manage the procurement activities of direct materials, including review and convert Purchasing. Requisition (PR) into Purchase Orders (PO); resolve invoice, or quality related discrepancies.
• Sending requirements to suppliers : Request for Quote (RFQ), Request for information (RFI) using digital tools.
• Purchase price analysis and price negotiations; Identification and realization of savings potentials,
• Close cooperation with the stake holders and suppliers.
• Supplier management including supplier set up, supplier evaluation and development.
• Optimization of existing supply chain processes and participation in project teams.
• Leverage existing procurement processes and compliance while seeking to identify best management practices. Using a continual improvement mindset to create efficient processes.

We are looking for:

• Degree in Industrial Engineering, Business Management, Economy or similar areas,
• +4 years professional experience in a similar position,
• Knowledge of Procurement / Supply Chain activities with a broad solid understanding of operational, activities across a range of businesses.
• Previous experience of working in Supply Chain Management
• Good knowledge of MS Office and SAP
• Fluent in English (written and spoken); Strong communication and negotiation skills;

Note: This role will require travel to China and Vietnam for approximately 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for a minimum of 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

Job Duties:

● Building Automation test framework for web and mobile applications

● Integrating tests withs CI pipelines

● Hands on different kinds of testing –API testing, web and mobile

automation, Database testing and Performance testing

● Defect lifecycle management and test data management

● Leading the entire QA process for the project

● Building and reporting QA metrics

● Involved in interviewing and recruitment activities based on business needs

● Generate thought leadership content relevant to your role to support our marketing department in social media activities and meetups

Job Requirements:

● 5+ years’ experience writing Automated Tests and building frameworks around it

● Should be able to build test and deployment strategy

● Experience in using Selenium and Cypress, and other open source testing tools like Cucumber, Gatling etc

● Experience in testing web-services in an automated fashion

● Basic understanding of Dev-ops practices – Docker, K8s, terraform

● Experience with cloud technologies: AWS or Azure or GCP

● Experience in writing SQL queries

● Good collaboration, communication , analytical and problem-solving skills

● Experience in working in an Agile development environment

● Experience in coaching and mentoring team members

Interested candidates may submit your updated resume to [email protected]

As a Quality & Reliability Assurance Engineer in Global Quality, we are encouraged to conduct electrical failure analysis and data analysis of next-generation 3D NAND memory devices. To sustain and improve Micron's memory quality, and developing outgoing monitor strategies together with risk assessment and product disposition in deviation management in HVM (high volume manufacturing( environment.

Responsibilities and Tasks

• Develop outgoing quality and reliability monitor strategies of NAND products in production phase.
• Perform product failure analysis on rejects to identify the failure mode and mechanisms that will lead to successful corrective actions and/or preventive actions.
• Assist and consult on post qualification quality and reliability issues and assist in the analysis and disposition of these materials.
• Coordinate with Research and Development and Product Engineering teams to comprehend new reliability issues and how to test for and assess their impact to customer risk and reliability.

Requirements

• Excellent problem-solving and analytical skills with strong attention to details.
• Ability to communicate clearly and concisely both verbally and in writing is essential in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work optimally in cross-functional teams and handle pressure situations in a professional manner.
• Candidates with at least 2 years of experience in the semiconductor industry as QRA or Product Engineer are preferred but fresh graduates are welcomed to apply. Experience in flash memory debugging and failure analysis is a plus.
• Bachelor's or Master's degree Electrical Engineering, Electronics Engineering, or a related discipline.

-Taking charge liaising with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality

-In Charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all related government agencies, aviation authorities and customers’ requirements and regulations

n Charge of reviewing and revising quality procedures and quality control instructions and performing of internal audits to evaluate quality system, products, and processes

Job Information

· Salary Package: Basic (starting from 2k) + Performance Bonus

· Other Benefits: Medical & Dental coverage

· Working Days: Monday – Friday + Half-day Saturday

· Working Hours: 8.30am – 5.30pm (Weekdays), 8.30pm – 12.30pm (Saturday)

· Working Location: Ubi/Eunos

· Job Contract: Full-time Permanent role

Responsibilities

• Perform daily, weekly & monthly inspection reports.
• Analyse and trouble-shooting production quality issues.
• Material receiving inspection
• Disposition of non-conforming products (incoming & outgoing).
• Handle customers’ complaint (CAR) with effective corrective actions.
• Provide training to QC inspectors.
• Liaise with client inspector on inspection point(s).
• Conduct regular line audit and drive for quality improvement.
• Conduct internal ISO audit and manage external customer audit.
• Conduct PMI, Pressure & PT tests
• To keep and update all the Welding Procedure Specifications (WPS) and
  Procedure Qualification Records (PQR)
• To keep and update all non-conformance reports (NCR), follow-up sheet, calibration status report of measuring and test equipment.
• Carry out any other duties as and when assigned by the immediate supervisor or higher management.

Requirements

• 2 years relevant working experience in related industries
• ASNT Level II
• Attention to Detail
• Strong written and verbal communication skills
• Effective time management
• Independent & keen learner
• Flexible and adaptable
• Able to manage high levels of stress
• Proficient in Microsoft applications: Outlook, Excel, Word, Power Point, etc.

Note: This role will require travel to China and Vietnam for approximately 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel extensively (approximately 10 months per year) to China and Vietnam. Travel includes four round-trip tickets to Singapore annually, with separate living arrangements provided.

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

Responsibilities:

• Inspect incoming raw/packaging materials and product labels to ensure they meet standard specifications.
• Conduct checks on the production line for compliance with Good Manufacturing Practices (GMP), including in-process items and finished products, ensuring adherence to Standard Operating Procedures (SOP) and product specifications.
• Generate weekly QC reports.
• Work closely with the production team to ensure quality products are produced.
• Ensure products adhere to and comply with food regulations.
• Report non-conformances to superiors or the person-in-charge for investigation and corrective action.
• Verify product labels before printing.
• Support in managing retention samples.
• Assist in pest control management.
• Maintain documentation and records.
• Identify opportunities for process improvement and quality enhancement.
• Perform any other related duties as assigned by superiors.

Requirements:

• Minimum 1 year of relevant working experience preferred.
• Capable of working as part of a team as well as independently with minimal supervision.
• Possesses good interpersonal skills, analytical skills, self-motivation, and meticulous attention to detail.

Summary

Imagine what you could do here. At Apple, new ideas have a way of becoming phenomenal platforms, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish. The Emerging Technologies QE team provides quality engineering support to ensure a high-quality release for our customers across all platforms. The QE Engineer position will be part of a horizontal Quality Engineering group focused on a breadth of technologies and applications including very highly scalable distributed applications, No-Sql platforms, internal search platforms, end customer facing websites and services, critical security systems, machine learning and anomaly detection systems, software-load balancing, etc. The job responsibility will include API Testing, Website testing, building test tools and automation platforms, and working to continuously improve the Quality Engineering process. The Quality Engineer will be part of a Software Engineering process with short iterations and a big focus on test automation. The engineer should enjoy working in an environment that is dynamic and fun loving, where change is constant and communication is open, and perfection is expected through collaboration. As a member of our fast-paced group, you will have the unique and rewarding opportunity to shape and improve the software that allows our products to surprise and delight billions of Apple’s customers every day! If you’re excited by the idea of making a real impact, and joining a team where we pride ourselves in being one of the most diverse and inclusive companies in the world, a career with Apple will be your dream job!

Description

The ideal engineer for this role is comfortable working in a dynamic and creative team charged with ensuring quality of many critical applications. The successful engineer will work closely with cross functional teams to develop robust solutions that will improve productivity and ship releases with high quality. You will be responsible for setting the bar high, going beyond ensuring a great experience and helping ship robust and amazing products. You'll take an active role in shaping the quality of our software and may lead others. Provide functional and integration quality-assurance testing for backend services and platforms. Build QE Automation tools and platforms with the goal of 100% automation and reduction of regression test cycles Innovate and Build Functional testing tools and enhance existing automation platforms Work closely with multi-functional organizations, project teams and clients to develop project schedules, execute test plans and cases, and deliver high quality products Act as a strong advocate for quality in the product development process for software engineering Contribute to initiatives to improve the overall QE process, such as identifying gaps or inefficiencies in workflows and suggesting improvements

Minimum Qualifications

• More than 6 years of experience in Software Quality engineering with at least one object oriented programming language such as Java and related frameworks
• Prior experience with relational databases (e.g. SQL), Open source testing frameworks (e.g., Selenium, Gauge, Playwright etc), working in Linux/Unix environments
• Advanced knowledge of creating Quality automation frameworks from scratch, QE automation architecture, methodologies, processes, and tools
• Working knowledge in Kubernetes, Docker, and cloud platforms such as AWS and GCP
• Experience automating functional & integration testing of applications on Apple operating systems and devices
• Experience testing in Java, SQL, Unix, Scala, NoSQL, and Web Services (Rest & SOAP) environments
• Expertise with continuous deployment systems using Maven, GIT, Spinnaker, and Jenkins; define branching, tagging, and code merging strategies
• Experience testing highly scalable and distributed platforms
• Experience with Continuous Integration (CI), Behavior Driven Frameworks (BDD), and setting up QE environments

Preferred Qualifications

• Solid foundation in CS fundamentals with proficiencies in data structures, algorithms and software design preferred.
• Knowledge of security domains including areas like PKI, Certificates, Cryptography, OWASP & ModSecurity is a big plus.
• Proven ability to deliver high-quality work on tight schedules
• Ability to work in a fast-paced environment with frequent context switching
• Collaborate with cross functional and globally distributed teams
• Self-motivated, independent, and dedicated with great organizational skills

Responsibilities:

· Expand and maintain clients’ business working relationships

· Keep clients up-to-date on company products and services

· Presentation and demonstration on HRMS software

· Achieve long-term sales revenue

· Develop marketing plans with sales team

· Ensuring KPIs are met

Requirements:

· Diploma / Degree in Sales & Marketing / related fields

· At least 2 years of relevant experience

· Good presentation and interpersonal skills

Please include in the CV

· Last drawn

· Expected salary

· Notice period

Interested candidates, please submit your CV to [email protected]

EA License No: 06C4642

EA Reg No: R1110624

All applications will be treated in strictest confidence and only short-listed candidates will be notified

Senior Warehouse Executive / Assistant Manager | Warehousing & Distribution | 5 Days | Up to $5k | Changi

Working Location: Changi Airfreight centre

Working hours: Mon-Fri 9am-6.30pm

Basic Salary: $3000-$5000

Responsibilities:

• Manage Contract / Service Parts Logistics warehouse and distribution business for MNC Customer in Electronics & Electrical industry
• Oversees regional operations for Contract / Service Parts Logistics across Asia Pacific and Japan
• Main point of contact for MNC Customer’s Regional Operation team based in Singapore
• Co-ordinate with Internal country logistics teams in South Asia & Oceania (Singapore, Malaysia, Philippines, Sri Lanka, Vietnam and others) and Japan on day-to-day operations matters and service performances
• Attend and lead external & internal meetings on Business Performances matters and Operational Excellence initiatives
• Project implementation and support Contract / Service Parts Logistics warehouse operation by using WMS, TMS and other tools
• Build good relationships and foster strong rapports with MNC customer & Internal stakeholders
• Work on logistics solutions with Internal country logistics teams to increase work efficiency & productivity of Contract / Service Parts Logistics warehouse and distribution programs for MNC Customer
• Assist department head in analysing reports to formulate business strategies
• Support regional opportunities to expand business share of MNC Customer

Job Requirements:

• Minimum Diploma in Logistics or Supply Chain or equivalent preferred.
• Minimum 5 years of relevant experience in Warehousing & Distribution (Service Parts Logistics background will be an added advantage)
• Computer Literate (MS Office, Excel, PowerPoint)
• Basic WMS, TMS system knowledge and usage (AS400, CargoWise system background will be an added advantage)

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Assistant Contract Manager / Senior QS [M&E Industry]

Basic: $4,000 - $6,000
Working Hours: 5 Days Mon-Fri (830am to 530pm)
Location: Redhill (Office)

Job Responsibilities

• As part of Tender/Contracts Team responsible in Pre/Post-Contracts administration
• Prepare and analyze cost comparison
• Obtaining quotations, liaising and negotiate with sub-contractors and suppliers
• Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments
• To assist in contract administration, prepare progress claim(s) and liaise with the Client’s representative.
• Review and preparing of response for claims and variation costs;
• To compile subcontractor quotations and submit for review and approval;
• To review and verify the Subcontractor’s / Supplier’s claims and prepare payment certificates and to obtain approval from various approving parties;
• Preparation of final accounts and variation submissions;
• Any other contracts management related job

Requirements:

• Degree / Diploma in Quantity Surveying / Building or equivalent from a recognized University.
• Minimum 5 years of related working experience in industrial projects.
• Good working knowledge in Mechanical and Electrical.
• Good knowledge of Singapore health and safety rules and regulations.
• Good knowledge of materials and works for site usage
• Good knowledge on local pricings

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]