Job Descriptions:

• Project coordination and carry out analysis and design of civil,structural, bridge and geotechnical engineering discipline.
• Familiar with design softwares eg. Civil 3D, Inrails, Inroads, Plaxis 2D/3D, Staad pro, SAP, Robot, Geostudio etc.
• Management of construction contracts.
• Planning site investigations, review field/laboratory test data and prepare civil,stuructural and geotechnical interpretative reports.
• Planning instrumentation, monitoring and review/analyse instrumentation data.
• Preparation of tender specifications,documents, design reports, making submissions to appropriate authorities and attending project meetings.

Job Requirements:

• Recognised Degree in Civil/Structural and/or Geotechnical Engineering Degree.
• Minimum 5 years' relevant experience and foundation engineering design for geotechnical, buildings and underground structures. Fresh graduate with recognised degree is welcome.
• Working experience in the infrastructure sector.
• Must be fully conversant with BCA regulations; able to maintain systematically site records, contracts, documents and meet BCA reporting requirements. Fully conversant with Eurocode and appropriate Singapore Standards.
• Committed, meticulous and a good team player.
• Singaporean/SPR only.

Job Description & Requirements

NACT Engineering provides drones accessories for all sizes and use-cases. Our intimate knowledge of robotics systems places us at the forefront of a burgeoning mechanical revolution. As a company at the cutting edge of engineering and robotics, we are looking for a suitable candidate that will push NACT forward as a bespoke drone solutions provider for our clients in the APAC region.

Highlights of working at NACT

• Close proximity to many amenties along alexander road
• Competitive compensation package remunerated based on skill and experience.
• High level of autonomy on the job with training opportunities provided for upskilling and learning
• Open culture and collaborative environment
• High growth industry

Job description

• Continuously update the IOT standalone GUI, and write manual documentation for the team to adopt.
• Work with electronics and full stack engineer to create a bidirectional data transfer, to create web based GUI to display robot product status
• Conduct troubleshooting of IOT controlled robotics system to verify the cause of failures, and assist in arriving at the corresponding solution.
• Ensure compliance with company programs procedures and applicable quality system regulations and standards.

Position Responsibilities

• Work on Single Board Computer to implement sensors and calculations to enable robotic functions
• Independently perform some level of failure analysis.
• Supports equipment development efforts for new products, and process improvements. These efforts may be the internal development of process equipment or coordination with an external equipment integration company.
• Supports processes. This support might include daily support of production operations as well as leading reliability and yield improvement activities for the IOT product.
• May be expected to work on complex problems where analysis of situations or data requires an evaluation of many tangible and intangible factors. Individual will be required at times to make complex technical recommendations on design quality and reliability.
• Writes Process Specifications and Manuals when applicable.
• Supports Return Merchandise Authorization process by providing root cause analysis report.
• Collaborates with Technical Experts from other software/hardware partners to implement new Product/ Process activities across the facilities following Technology Roadmaps and Design Engineering activities.
• Performs other position related duties as assigned.

Quality Responsibilities

• Reports any observed or informed process and/or product non-conformities.
• Finds resolution of Quality Situations at the area of responsibility.
• Complies with all the requirements in the operational procedures at the area of responsibility in order to meet the requirements of all applicable Quality System regulations.

Company Background:

GWS Living Art is a team of urban green technology specialists based in Singapore. We specialize in turnkey development and implementation of nature-based solutions, including Green Wall systems and Green Roofs. Our mission is to address environmental challenges through innovation and provide sustainable solutions for a better world.

We are looking for a Project Engineer to join our team! In a construction team, the Project Engineer works under the guidance of the Project Manager in the execution of construction projects. Candidates who possess suitable qualities will be closely mentored to gain both technical and management qualities. It is a role with good developmental potential as candidates can eventually pursue a career in Project Management, Safety Management or Professional Certifications.

Job Description:

• Assist with on-site management to ensure project success
• Assisting to plan for the progress of various projects through the deployment of manpower, equipment and logistics
• Assist in the preparation of technical documents, such as construction drawings
• Work together with other members of the team to effectively execute the operations plan
• Assist in the safety and risk management of operations
• Other ad hoc duties as required

Job Requirement:

• 1 or 2 years of working experience as a Project Engineer would be an advantage.
• Both fresh graduate and experienced candidates are welcome to apply (mature and non-mature).
• Recent postgrads with a Bachelor’s degree in Engineering preferably Mechanical & Electrical / Civil Engineering / Environmental.
• Basic Microsoft Office skills and Construction knowledge.
• Knowledge of Safety and Risk Management would be an advantage.
• Knowledge of using any Autodesk software (e.g. AutoCAD/ Revit/ BIM 360) would be an advantage.
• Good interpersonal and communication skills.
• Able to start work in short notice will be preferred

Working Day: Monday to Friday

Working Hours: 9am to 6pm

Key Responsibilities

• Install new systems, machinery, or equipment at client sites, ensuring all components are set up according to manufacturer specifications and safety standards.
• Perform on-site commissioning to ensure systems are operating correctly, testing functionality, and providing training to customers on proper usage.
• Perform routine and preventive maintenance on equipment, systems, and machinery to extend operational life and reduce downtime.
• Diagnose and troubleshoot complex mechanical and electrical failures to identify the root cause and provide effective solutions.
• Repair and replace faulty components, parts, and equipment to ensure systems are restored to peak performance.
• Provide on-site or remote technical support to customers experiencing issues with their equipment, offering clear instructions and guidance.
• Document all service-related activities, including diagnostics, repairs, and parts used, into the company's service management system.
• Escalate unresolved issues to senior engineers or technical experts for more in-depth investigation.
• Act as a key liaison between the customer and the company, ensuring customer satisfaction through timely, high-quality service.
• Develop and maintain strong customer relationships to foster long-term partnerships and ensure repeat business.
• Monitor inventory levels of parts, tools, and consumables required for service jobs, ensuring timely reordering and availability.
• Ensure the proper handling and storage of tools and equipment to maintain their integrity and readiness for future tasks.
• Create detailed service reports documenting the service work performed, including diagnostics, repairs, parts replaced, and any customer feedback or recommendations.
• Ensure all work complies with safety, legal, and regulatory requirements, as well as company standards.

Pre-Requisites (Qualifications & Experience)

• Candidate must possess at least a Diploma or Degree in Biomedical or Electronics & Computer Engineering
• Knowledge in Information Technology and/or a wide range of medical product
• 2 – 3 years of field experience in the medical industry would be an advantage
• Able to travel as and when required
• Able to perform shift and standby duties
• Good organizational and problem solving skills
• Good interpersonal and communication skills
• Meticulous and detailed-orientated
• Self-started and able to multitask
• Critical thinker
• Willing to learn clinical knowledge
• Proficient in MS Office Application (Word, Power Point, Excel)
• Good Technical Knowledge

TME Systems is a premier high-tech solutions and services provider. Founded in 1987, we are headquartered in Singapore and offer extensive coverage throughout Southeast Asia.

With over 30 years of experience, we specialize in distributing cutting-edge technology products and solutions across several market spaces, namely Test & Measurement, Software and Energy & Electrification Solutions.

We are seeking a motivated and resourceful Sales Engineer to expand our Software team.

Responsibilities

• Develop and execute sales strategies to achieve sales targets and expand market share
• Provide support and consultation to customers, helping them understand the value and benefits of TME solutions
• Conduct TME Solutions presentations
• Collaborate with the sales and marketing team to create compelling proposals and respond to RFPs/Tenders
• Idetify and engage with potential customers, building a strong sales pipeline
• Attend industry events, conferences, and trade shows to network and promote TME Solutions
• Monitor market trends, competitor activities and customer feedback to inform sales strategies
• Build and maintain strong relationships with customers and prospects in the regions.

To be successful in this role, you should have:

Technical Skills

• In-depth knowledge of either Modeling & Simulation or Real-Time Operating Systems
• Strong engineering or computer science background
• Experience with software demos and technical presentations
• Ability to understand and address customer technical requirements.

Soft Skills

• Consultative, solutions-oriented sales approach
• Excellent communication and presentation abilities
• Strong problem-solving skills
• Strong interpersonal skills and customer focus for building lasting relationships
• Experience in selling software solutions
• Ability to work both independently and collaboratively
• Willingness to travel and adapt to different cultural environments.

What we offer

• Attractive remuneration package
• Good working culture and management
• Work-life balance
• Career progression and personal growth opportunities.

Please apply with expected salary.

We are looking for a talented and motivated Software Engineer to join our engineering team. In this role, you will be responsible for designing, developing, testing, and maintaining software applications and systems. The ideal candidate should have a strong understanding of software development principles, be comfortable working with various technologies, and thrive in a collaborative and fast-paced environment.

Key Responsibilities

* System Design & Architecture: Participate in designing system architecture and defining technical solutions to meet business needs.

* Testing & Debugging: Develop and execute unit, integration, and system tests to ensure high-quality software and troubleshoot software defects.

* Collaboration: Work closely with cross-functional teams, including product managers, UX/UI designers, and QA engineers, to understand requirements and deliver solutions.

* Code Reviews: Conduct code reviews to ensure adherence to best practices, coding standards, and high-quality development processes.

* Continuous Improvement: Stay current with emerging technologies and industry trends, and implement improvements in software development processes.

* Documentation: Create technical documentation to explain code, system designs, and other relevant details for internal teams.

Skills & Qualifications

* Education: Diploma / Bachelor’s degree in Computer Science, Engineering, or related field (or equivalent experience) Fresh graduate are welcome.

* Technical Skills:

* Experience with version control systems (e.g., Git).

* Familiarity with cloud platforms (e.g., AWS, Azure, Google Cloud) is a plus.

* Experience with databases (e.g., MySQL, PostgreSQL, NoSQL).

* Knowledge of software engineering best practices, including design patterns, clean code, and testing methodologies.

* Familiarity with Agile/Scrum development methodologies is beneficial.

* Problem Solving: Strong analytical and troubleshooting skills with the ability to solve complex problems.

* Communication: Excellent verbal and written communication skills to effectively work with both technical and non-technical stakeholders.

* Collaboration: Team player with the ability to work independently and as part of a team in a fast-paced environment.

Preferred Qualifications

* Familiarity with containerization technologies (e.g., Docker, Kubernetes).

* Experience with CI/CD pipelines and automated testing.

* Knowledge of microservices architecture.

* Experience in building scalable and high-performance systems.

Company background:

Focus Computer Pte Ltd has been operating since 1989, and is an established leader in the IT hardware and software fulfilment space in Singapore. We have provided a stable environment for our employees since our inception and we believe in taking care of our employees through thick and thin. We have established Focus Digitech Pte Ltd in order to meet the growing demands for digital transformation by our customers, and we have an opportunity to hire a Senior IT Infrastructure Engineer to join our growing team. Your entry point into the company does not limit the potential you have to rise within the company to other roles as your aspirations and attitudes may propel you towards. We believe that paper qualifications can only tell us so much, and we believe in hiring people with the right skills and not just certifications (although we will accord due credit if you have them). So, come discover your full potential with us as we take Focus Digitech to the next level of leadership in digital technologies!

The Role:

We are seeking a highly motivated and experienced Senior IT Infrastructure Engineer to join our team. As a Senior IT Infrastructure Engineer, you will be responsible for managing, maintaining and optimizing our IT infrastructure at our clients. This position requires a strong technical background in various areas including server and storage systems, virtualization, networking, security, and monitoring.

Responsibilities:

Server and Infrastructure Management:

• Design, configure, deploy, and maintain Wintel and Linux server environments, including Windows Server (2019, 2022) and Linux distributions (RHEL, SUSE).
• Conduct server hardening for both Windows and Linux systems.
• Lead and collaborate with cross-functional teams to implement and oversee server hardware, virtualization technologies, and storage solutions to ensure availability and scalability.

Virtualization:

• Lead virtualization initiatives using industry-standard platforms such as VMware vSphere, Hyper-V, or KVM.
• Optimize virtualization environments for efficiency, performance, and resource utilization.

Storage (SAN / NAS):

• Design and manage Storage Area Networks (SAN/NAS), ensuring data availability, integrity, and optimal performance.
• Implement and administer storage solutions, including storage provisioning, zoning, and troubleshooting.

Security:

• Implement security best practices for infrastructure components and virtualized environments.
• Ensure compliance with industry standards and regulations related to infrastructure and data storage.
• Implement and administer key management and encryption.

Active Directory:

• Implement and administer Active Directory, including user accounts, group policies, security settings, and domain controllers.
• Implement and administer AD Public Key Infrastructure and Network Policy Server RADIUS services.

Management Applications:

• Implement and administer monitoring solutions such as eG Innovations, PRTG, Splunk, or Kiwi Syslog server.
• Implement and administer backup solutions like Veeam or Acronis.

System Maintenance and Monitoring:

• Develop and maintain scripts and automation tools to optimize IT infrastructure.
• Monitor system performance, troubleshoot, and resolve issues related to the IT infrastructure.
• Implement advanced system monitoring solutions to proactively identify and resolve performance and security issues.
• Develop and maintain comprehensive backup and recovery strategies, including disaster recovery planning.

Troubleshooting and Collaboration:

• Investigate and resolve complex technical issues related to Windows Server systems, collaborating with teams and vendors.
• Collaborate with network engineers, system administrators, to support business operations.

Capacity Planning and Governance:

• Conduct meticulous capacity planning to align Windows Server resources with current and future needs.
• Maintain SLA standards, act as an escalation point for incidents, and ensure user satisfaction.

Vendor Coordination and Documentation:

• Coordinate with third-party vendors, IT providers, and external support for effective service delivery.
• Develop and update comprehensive operations documentation and procedural guidelines.

Requirements:

• Bachelor's degree in Computer Science, Information Systems, Information Technology, or a related field.
• Minimum of 5 years of experience in IT infrastructure engineering with a focus on Windows Server administration.
• Experience with Wintel servers (Dell), VMware, Microsoft server products, Symantec
• Proven experience in designing on-prem data centre architectures.
• Proficiency in configuring, managing, and troubleshooting Windows Server environments.
• In-depth knowledge of Active Directory, Group Policies, and security best practices.
• Familiarity with virtualization technologies such as VMware or Hyper-V.
• Experience with scripting and automation tools.
• Strong troubleshooting and problem-solving skills.
• Excellent communication and teamwork skills.
• Ability to work independently and manage multiple projects.
• Offer is subject to Singapore Government G50 clearance.
• Relevant certifications (e.g., MCSA, MCSE, VCP) are a plus.

If you meet the qualifications above and are passionate about working with cutting-edge technology, we encourage you to apply. We offer competitive salary packages and excellent benefits.

Qualifications:

- 3-5 years working experience in C&S Engineering Consultancy Firm.

- Degree is recognized by Professional Engineers Board (PEB), Singapore.

- Preferably, has passed FEE, examination prescribed by PEB.

- Conversant with latest design codes and authority requirements.

- Competency in design software such as ETABS, SAFE, SAP2000, GSA, IDEA StatiCa, Tekla etc.

- Able to work independently to support the QP and directors.

- A team player and to carry out tasks/duties in a positive and dignified manner

Responsibilities:

- Responsible for the execution of civil and structural design involving the preparation of calculations, drawings and detailing.

- Assist in producing tender specifications and design requirements for calling of tender contracts.

- Attend project/technical meetings with authorities, developers and contractors.

- Involve in project planning, implementation and close monitoring of projects.

- Project coordination including submission to local authorities and liaison during the construction stage.

- Liaise with clients, consultants and authorities on technical matters.

Assist the Team Directors in the performance of their duties

· Ensure quality and accuracy of designs

· Offer suggestions to improve the designs

· Produce sketch drawings

· Carry out design calculations

· Check design calculations

· Ensure compliance with Project Design Criteria/Client Brief/ Approved Concept

· Ensure compliance with relevant design standards and office standards

· Check documentation complies with design

· Attend and participate in design meetings

· Ensure compliance with ISO Quality Procedure Manual

REQUIREMENTS

• Recognised Bachelor’s degree or equivalent in Structural Engineering, as a minimum.
• 1-7 years of design experience in a consulting Environment.
• Must have experience in HDB.
• Must have design experience in high rise residential, commercial or mixed development projects.
• Fully familiar and hands-on knowledge of the latest design software.

ADDITIONAL REQUIREMENTS:

• Good interpersonal and communication skills
• Must be fully familiar with European code
• Hands-on experience with the analysis and design of large building projects in structural steel, R.C. and post tensioned concrete

DUTIES

· Plan and manage manufacturing processes from raw material receipt to finished

· part shipment.

· Create or revise work instructions and develop new processes according to

· Engineering drawings and standards.

· Design Jig & Fixture to support CNC section.

· Develop Advanced Product Quality Planning, carry out associate training and a

pre-production trial project.

· Assist Production in fulfilling technical and quality requirements.

· Manage technical changes to fulfill customer requirement.

· Providing assistance with the RFQ proposal process and development.

· Any other ad hoc duties as assigned.

REQUIREMENT

· Diploma/Degree in Mechanical / Precision Engineering or other relevant discipline.

· Minimum 3 years of experience as a process engineer in the Manufacturing

industry or equivalent.

· Experience with Master-CAM Programming are preferred.

· Experience of hands-on CNC Milling/Turning fabrication.

· Good problem-solving skills.

· Proficient in Microsoft Excel functions.

· Systematic and meticulous in approach.

· Good communication skills & acts as a team player in a small dynamic team.

About our client: Our client is a leading international chemical manufacturing company.

Work Location: Jurong Island (company transport provided)

About the role:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of:

(a) daily maintenance [preventive, corrective, & breakdown maintenance],

(b) transition maintenance,

(c) turnaround maintenance and

(d) upgrading and improvement related to maintenance

• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s
• HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability
• objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

About you:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.
• An aptitude for and interest in chemical process
• Analytical skills
• Ability to work well under pressure
• Good communication skill and able to collaborate with different functions
• Problem-solving skills

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer executes the activities within own area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A - Development Technology know how and Commercial support

B - Feasibility

C - Bidding phase/Commercial proposal development

▪ Prepare Telecommunication Systems quantities for cost and erection works estimates

▪ Support Discipline Lead to define man hours and cost estimates

D - Project Execution

▪ Review Client technical documentation and requirements

▪ Coordinate subcontracted engineering activities and control subcontracted engineering documents

▪ Define engineering design basis and guidelines

▪ Prepare the technical documentation for Telecommunication material and services requisitions and prepare, according to

internal procedures, the technical evaluations

▪ Provide technical support to Project Team

▪ Optimise Telecommunication Systems design ensuring minimal cost and complexity in compliance with the contractual and

safety requirements

▪ Prepare Telecommunication systems functional specifications

▪ Prepare Telecommunication equipment data sheets

▪ Validate Vendor Telecommunication BOQs

▪ Coordinate detail engineering activities and ensure proper installation drawings definition

▪ Participates to F.A.T. activities and Vendor workshop

E - Construction and start up

▪ Participate to Site Acceptance Test and functional checks

▪ Provide technical and engineering support to construction Team

▪ Perform site engineering activities during construction and commissioning phases.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

The Engineer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE requirements.

Tasks include:

A - Development Technology know-how and Commercial support

B - Feasibility

C - Bidding phase/Commercial proposal development

▪ Prepare Instrumentation elements (tagged items and bulk material), quantities for cost and erection works estimates

▪ Support Discipline Lead to define man hours and cost estimates

D - Project Execution

▪ Review Client technical documentation and requirements

▪ Coordinate subcontracted engineering activities and control subcontracted engineering documents

▪ Define engineering design basis and guidelines

▪ Prepare the technical documentation for Instrumentation elements material and services requisitions and prepare, according to internal procedures, the technical evaluations

▪ Provide technical support to Project Team

▪ Optimise Instrumentation design ensuring minimal cost and complexity in compliance with the contractual and safety requirements

▪ Prepare Instrumentation technical specifications

▪ Prepare Instrumentation data sheets

▪ Prepare Instrumentation installation specifications and drawings

▪ Prepare Instrumentation BOQs and MTOs

▪ Participate to P and ID mechanization

▪ Validate Vendor control valves and safety valves sizing calculations

▪ Validate Vendor measurements elements sizing calculations

▪ Coordinate engineering activities

▪ Ensure Instrumentation 3D modeling design activities

▪ Participate to F.A.T. activities and Vendor workshop

E - Construction and start up

▪ Provide technical and engineering support to construction Team

▪ Perform site engineering activities during construction and commissioning phases.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer executes the activities within the area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A-Development Technology know-how and Commercial support

▪ Provide technical support

B-Feasibility

▪ Provide technical support

C-Bidding phase/Commercial proposal development

▪ Analyse and understand Tender documentation

▪ Take part in electrical system design review

▪ Identify technical queries, deviations an d alternatives to be submitted

▪ Implement bidding methodologies, design criteria and guidelines

▪ Define and issue request for quotation for items not estimated in house

▪ Coordinate material quantities and weights (MTOs) estimation

▪ Prepare bill of quantities for erection works cost estimation

▪ Support Electrical Lead to define manhours estimation

D-Project Execution (Job progress and completion)

▪ Review Client technical documentation and requirements

▪ Take part in definition of electrical engineering requirements

▪ Prepare Project design criteria for electrical system

▪ Define the configuration of the electrical system and the single line diagram

▪ Perform electrical system calculation and studies (e.g. power demand, load flow, short circuit, transient stability, motor starting) to define the equipment rating

▪ Prepare relay and metering schemes, protective relays coordination study and setting tables

▪ Define the functional philosophies for the electrical system control (power management, synchronization, load shedding, reacceleration and restarting) and control system architecture

▪ Prepare technical documentation (e.g. specifications, data sheets) for electrical equipment and materials

▪ Check and review technical documentation according to Project and client procedures

▪ Prepare Purchase Requisitions and bids technical evaluation

▪ Perform check and review of Vendor technical documentation

▪ Provide technical support to Procurement in purchasing and to Post order in expediting and testing

▪ Develop electrical system plant design (e.g. cable routings, grounding) and substations arrangements

▪ Perform power cables sizing

▪ Define typical installation details, bulk materials selection and take off (MTOs)

▪ Define bill of quantities and prepare technical documentation for electrical system installation

▪ Define technical procedure for electrical system testing and energization E-Construction and start up

▪ Support Construction for electrical system installation works and bulk materials management

▪ Assist, when necessary, engineering adjustment and define modifications

▪ Revise as built the technical documentation

▪ Support Commissioning for electrical system testing and energization

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Naval Group Far East Pte Ltd

Naval Group designs, builds, integrates, provides in-service support, dismantles, and deconstructs submarine and surface ships. As an industrial contractor, designer, and overall integrator of whole warships and combat systems, it also offers a full range of services to naval bases and shipyards. We are a prime contractor, designer, and integrator of naval systems, with over 400 years of experience in naval shipbuilding. Naval Group Far East is a wholly-owned subsidiary of Naval Group SA, headquartered in France.

Job position: R&D Engineer (VHF) Intern

VHF Communication Bot

Overview

Very High Frequency (VHF) radio communication is widely used in the maritime industry for essential ship-to-ship and ship-to-shore interactions. However, these communications often suffer from noise, language barriers, and overlapping speech, making them unclear and difficult to interpret.

The goal of this project is to develop an automated, accurate, and reliable system for transcribing and translating VHF radio communications. The system should deliver clear transcriptions and translations of each speaker’s input. If time permits, an additional feature will involve generating a situation summary based on the communication.

Due to limited availability of real-world data, this project will also involve data collection and generation, which could include sourcing open datasets or simulating relevant data using different methods.

Requirements

· Proficiency in shell scripting and Python programming

· Experience with Git for version control

· Interest or experience in Natural Language Processing (NLP)

· Familiarity with deep learning libraries such as PyTorch or TensorFlow

Responsibilities

· Collaborate with a team to prototype and explore solutions

· Contribute to the architecture design and development, tackling challenges like high reliability and scalability

· Research and implement technologies and approaches that align with project goals

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

A. Development of Technology Knowledge & Commercial Support
Provide technical assistance in their area of expertise.
B. Feasibility
Offer technical support for project feasibility studies.
C. Bidding Phase/Commercial Proposal Development
- Review technical documents related to tenders.
- Define activity and deliverable lists, and coordinate tasks according to the project schedule.
- Identify and address technical queries, deviations, and alternatives for submission.
- Apply bidding methodologies, design criteria, and guidelines.
- Assist the proposal team with RFQs for commercial purposes.
- Estimate material quantities and weights (MTOs).
- Prepare manhour, item, bulk, and material cost estimates.
- Engage with clients and attend clarification meetings.
D. Project Execution (Job Progress and Completion)
- Achieve assigned goals and meet project quality and contractual requirements.
- Collaborate with the Discipline Leader to define activity and deliverable lists, set schedules, and coordinate activities per contractual requirements.
- Develop design specifications for civil works, including concrete works, plant roads, underground networks, and piling.
- Prepare detailed BOQs for civil works and buildings and MTOs for steel structures.
- Create technical documentation for subcontracted engineering activities.
- Design systems for drainage, sewage, plumbing, and building interiors.
-Conduct studies for foundations and concrete structures.
- Perform quality checks on all discipline-related project documents, including vendor submissions.
- Track and report scope changes to the Discipline Leader, updating manhour and cost estimates.
- Provide technical support to procurement, construction, and other project functions.
- Assist the Discipline Leader/TM in interfacing with clients on technical matters.
- Develop technical documentation for civil material requisitions and support procurement with technical evaluations.
- Collaborate with the Discipline Leader on Technical Bid Evaluations.
Review and address Client's technical documentation and requirements.
- Maintain project technical files.
- Execute assigned engineering activities, including detailed design, verification, and studies.
- Supervise and approve engineering designs and construction drawings for civil items like foundations, structures, and buildings.
- Monitor and report trends in civil quantities compared to bid-phase estimates.
- Design functional layouts, architectural aspects (3D modeling), and interior finishes, including furniture.

E. Construction & Start-Up
Provide field engineering support on-site.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer is responsible for executing tasks within their area of responsibility while ensuring compliance with QA/QC and HSE requirements. Key responsibilities include:

A. Development of Technology Knowledge and Commercial Support
B. Feasibility
C. Bidding Phase / Commercial Proposal Development
- Select critical materials.
- Estimate project costs.

D. Project Execution
- Ensure the quality, adherence to budget, and timely delivery of piping material tasks.
- Review and analyze the client’s technical documentation and requirements.
- Design all piping components.
- Develop project piping material specifications and piping component data sheets.
- Perform pipe wall thickness calculations.
- Prepare technical specifications for the requisition of piping components.
- Conduct technical bid evaluations for piping component offers.
- Review and approve vendor documents.
- Maintain project technical files and update company standards.
- Perform inter-disciplinary checks on documents within the piping materials scope.
- Verify documents prepared by piping material engineers.
- Validate the issued MTO with the Lead Engineer.
- Establish and manage the Piping Material Management System (PMMS) database.
- Support the inspection department as needed.
- Draft mechanical valve specifications for motorized valve bodies.
- Notify the Project Piping and Layout Leader of potential technical, financial, or scheduling risks.
- Contribute to the REX (Return on Experience) report for piping materials after contract completion.
- Evaluate piping material costs.
E. Construction and Start-Up
- Provide technical support.
- Assist with engineering adjustments on-site, if required.
F. Home Office Activities (Master)
- Validate cost estimates.
- Coordinate projects by providing guidance to discipline leads and material engineers to harmonize designs and methodologies.
- Support projects and procurement by addressing both standard and non-standard issues.
- Propose modifications to departmental workflows and technical standards.
- Contribute to updates in company workflows and technical standardization processes.
- Collect project feedback for continuous improvement through lessons learned.
- Participate in vendor and outsourcing qualification processes.
- Contribute to procurement strategy development with the purchasing team.
- Identify and develop tools to streamline design activities.
-Plan, oversee, and manage outsourced engineering centers.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Ensures the execution of the engineering activities within his area of responsibility, works following the TM

guidelines, cooperates with the other Project positions and ensures the compliance with the QA/QC and HSE requirements.Tasks include:

A-Development of Technology know-how and Commercial support

B-Feasibility

▪ Provide technical support to other Project positions for specialist aspects

C-Bidding phase/Commercial proposal

▪ Analyse and understand Tender documentation

▪ Define Discipline list of activities and deliverables and coordinate activities in accordance with Project schedule

▪ Identify technical queries, deviations and alternatives to be submitted

▪ Implement bidding methodologies, design criterias and guidelines

▪ Define and issue Request for quotation for not estimated in-house items

▪ Coordinate material quantities and weight estimation

▪ Prepare engineering manhour and material cost estimations

▪ Support the Proposal Manager during technical clarification meetings with the Client

D-Project Execution

▪ Ensure the achievement of the assigned goal and the fulfillment of the Project quality and contractual requirements. Take the necessary corrective actions within the Discipline Project Team to meet the assigned goal. Report to the TM for more

extensive problems

▪ Define list of activities and deliverables, setup time schedule, coordinate activities in accordance with contractual requirements

▪ Ensure Discipline Project progress, monitor and control manhour consumption

▪ Prepare technical annexes for engineering activities to be subcontracted

▪ Ensure subcontractor coordination and monitoring/reporting to PM of the Discipline budget costs

▪ Ensure proper Discipline workflow, interfaces, quality checks and ap proval of all Discipline Project documents, including Vendor ones

▪ Track and report to TM Discipline scope of work changes updating manhour and cost estimates

▪ Provide technical support to Project functions including Procurement and Construction

▪ Support PM in technical interfacing with the Client (according to TM)

▪ Define and issue Purchase Requisitions

▪ Ensure Technical Bid Evaluations

▪ Ensure Vendor follow-up activities

▪ Provide technical support for the definition of the Discipline construction inspection plan

▪ Manage Vendor inspection test plan approval and support post order activities -Construction and start up

▪ Support the construction team in implementing the engineering solutions at site F-Home office activities (master)

▪ Verifiy manhour and cost estimates

▪ Check key Project documents according to internal procedures

▪ Support Project teams to solve non standard technical issues

▪ Update Discipline workflows and technical standards

▪ Support execution plan definition

▪ Monitor Discipline Project KPIs

▪ Participate to Vendor technical qualification and to procurement strategy definition.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading global pharmaceutical manufacturing company.

*This role will be hired on a 1 year contract to support our client's project, with possible extension / renewal*

About the role:

• Demonstrate the ability to lead technical projects from concept through implementation in collaboration with the Process Engineering team.
• Perform activities such as incoming goods inspection (IGI), FAT/SAT, and installation verification for new equipment and modifications to existing equipment.
• Assist with the execution of qualification protocols for IQ and OQ.
• Support all phases of engineering project implementation to ensure alignment with scope, schedule, budget, quality, and safety requirements.
• Be capable of reading and understanding PCS7 Functional Specifications, ensuring they are fit-for-purpose and aligned with business needs.
• Coordinate with the Automation team, as well as with manufacturing and MSAT teams, for improvements or implementing changes related to software FAT.
• Collaborate with engineering consultant firms and process engineers to support and complete tasks within the schedule for new and modified equipment, including:
  o Reviewing P&IDs, standard detail drawings, URS, etc.
  o Involving in Factory Acceptance Testing (FAT) of all process equipment, when applicable.
  o Coordinating inspection site installation of new equipment upon delivery.
  o Reviewing Vendor Turnover Packages and Construction Trade Turnover Packages.
  o Reviewing functional specifications.
  o Participating in Software FAT using PCS7, if applicable.
  o Assisting in commissioning and qualification of new or modified equipment in Cell Culture or Downstream (Purification) areas, including reviewing and executing C&Q documents.
• Target delivery of results on the first attempt.
• Adhere to applicable Environmental, Health, and Safety (EHS) requirements.
• Commit to maintaining fair and respectful relationships with others and behaving according to the company's code of conduct.
• Perform other duties as assigned by process engineering team members or management.

About you:
• 3 to 5+ years of experience in Upstream/Downstream bioprocess operations and demonstrated experience in equipment design within the pharmaceutical/biopharmaceutical industry.
• Experience in an engineering role supporting cGMP operations in a pharmaceutical/biopharmaceutical manufacturing plant is highly desirable.
• Experience in the design and operation of biopharmaceutical manufacturing equipment and facilities.
• Experience in the management and coordination of engineering and construction management consultants, equipment vendors, and contractors.

Key Skills and Competencies:
• Process and equipment knowledge of biological drug substance manufacturing processes; expertise in downstream unit operations is highly preferable.
• Knowledge/experience in change control management and deviation investigation & closure.
• Understanding of equipment commissioning, various stages of qualification, and process activities.
• Thorough knowledge of current Good Manufacturing Practices (cGMP) and Good Engineering Practices (GEP).
• A solid understanding of design principles and standards within biopharmaceutical facilities.
• Strong knowledge of sanitary design aspects of biopharmaceutical manufacturing equipment.
• Ability to communicate effectively, both in writing and orally, at all levels.

*Please note that only shortlisted candidates will be contacted.*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading global engineering and project management consultancy embarking on large-scale infrastructure and environmental projects.

*Please note that this role will be hired on a long-term contract to support our client's project.

*Work Location: West

*Salary range: $6,000 - $7,200

About the role:

· Lead the site supervision team on all the Civil and Structural and Building Construction works.

· Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.

· Address and respond to all Contractor’s RFI’s and technical submittals. Other work scopes include but not limited to assess method statements/instrumentation reading, coordinate with other discipline engineers and liaise with design team/QP from HQ.

· Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

About you:

· Good graduate Degree in Civil & Structural Engineering, preferably recognised by the PE Board, Singapore.

· Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.

· Registered with IES as Resident Engineer (Civil).

· A person with good communication and leadership skills.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading international engineering consultancy.

*Please note that this role will be hired on a contract basis to support our client's project, to start in 2025.

*Work Location: Tuas (company shuttle bus is provided)

*Working days: 5.5 days

About the role:

• The T&C Lead Engineer will assist the T&C Manager in overseeing all testing and commissioning activities of the Contractors, including coordinating related activities that interface with the project.
• The T&C Lead Engineer will help lead the OE’s testing and commissioning team and coordinate with the Resident Site Supervision (RSS) Team, the OE’s design team, and the Contractors. This collaboration will focus on reviewing the development and execution of the Contractors' testing and commissioning plans to ensure the achievement of project milestones for each EPC Contract.
• The T&C Lead Engineer will support the T&C Manager in overseeing all aspects of the Contractors' testing and commissioning activities, including managing interfaces between EPC Package 1 and EPC Package 2. This oversight will encompass the entire process from dry/cold commissioning to hot commissioning, culminating in successfully completing the commissioning process and trial run, including optimization of plant operations with the Contractors and Operations & Maintenance teams.
• The role includes participation in regular T&C Coordination Meetings with the Contractor and/or other Contractors on adjacent sites, which may also include Client representatives.
• The T&C Lead Engineer will handle any other tasks delegated by the T&C Manager as needed.

About you:

• The T&C Lead Engineers shall have at least 5 years of hands-on relevant experience in testing and commissioning (and operation) of large scale solid waste management projects (Waste to Energy - WTE, sludge incineration, materials recovery and food waste treatment), or experience with large scale industrial/process/utilities projects (i.e. waste, water, oil & gas, power) testing and commissioning.

• The T&C Lead Engineer to have a relevant engineering degree or certification.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Execute the activities within own area of responsibility, ensuring the compliance with the QA/QC and HSE requirements

Tasks include:

A - Development Technology know how and Commercial support

B - Feasibility

C - Bidding phase / Commercial proposal development

▪ Bill of material

▪ Plot plan layout proposal

▪ Support lead to define man hour and cost estimate D - Project Execution

▪ Ensure the Piping and Layout engineering support to different projects

▪ Ensure the achievement of assigned goals and the fulfilment of project quality requirements and contractual obligations

▪ Analyse technical documents (e.g. specifications, calculation notes, drawings) to assess the scope of the studies required and the potential risks

▪ Seek solutions which can bring overall savings to the project

▪ Estimate quantities or validate estimation done by other specialist of the team

▪ Check all produced documents (internal or subcontracted) like design reports, technical specifications, drawings under responsibility

▪ Write the Piping and Layout methodologies / Design Premises comprehensive of all necessary data, general and specific design guidelines

▪ Ensure the achievement of assigned goals and the fulfilment of project quality requirements and contractual obligations

▪ Analyse project technical documents to validate consistency between the budget, resources and means allocated for the work completion and the targets to be met

▪ Organize the work of the team under responsibility

▪ Define and follow-up the planning of resources mobilization

▪ Monitor and report actual progress including 3D / check for Discipline activities, includ ing control of men-hours and delivered documents

▪ Control the input data for team activities and check/review all documents issued by the team

▪ Attend to internal review activities and inter-discipline check meetings

▪ Provide technical support to Project group

▪ Provide technical support to Procurement, Subcontracting and Construction activities included in the scope of work

▪ Supervise the writing of specifications and requisitions as well as technical bid evaluations

▪ Inform on a permanent basis the Project Piping and Layout leader of any foreseen technical or financial or delay risk

▪ Feed the Piping and Layout Department improvement system by reverting the lessons learned during the project E - Construction and start up

▪ Participate to test circuit verification

▪ Field engineering during construction activities

▪ Assist, when necessary, engineering adjustment on site

▪ Material management at site

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE requirements.

Tasks include:

A - Development Technology know how and Commercial support

B - Feasibility

C - Bidding phase / Commercial proposal development

▪ Estimate quantity and cost for critical support

D - Project Execution

▪ Be responsible for the quality, respect of budget and respect of project schedule for piping flexibility analysi s tasks

▪ Review the Client technical documentation and requirements

▪ Be responsible for the design of all piping supports components

▪ Issue project piping flexibility (Stress analysis) specification and critical lines list

▪ Perform calculations of critical piping networks

▪ Issue loads to allow the design of pipe-rack and foundations

▪ Issue technical part of requisitions for all piping supports components required by flexibility analysis

▪ Issue technical bid evaluation for all piping supports components offers

▪ Issue technical part of requisitions for all piping supports components purchase orders

▪ Review and approve vendors documents

▪ Maintain project technical files and update Company standards

▪ Perform the inter-disciplines checking for the part of documents in accordance with the scope of piping flexibility section

▪ Check sub-contracted discipline engineering documents in accordance with the scope of piping flexibility section

▪ Check documents issued by piping flexibility engineers

▪ Check the isometrics for construction of critical lines

▪ Assist P and ID section preparation for flexibility inputs of line list

▪ Inform on a permanent basis the Project Piping and Layout leader of any foreseen tech nical or cost impact or delay risk

▪ Capitalize piping flexibility activities performed during the project E - Construction and start up

▪ Provide technical support

▪ Assist, when necessary, engineering adjustmenton site

F - Home ofice activities (Master)

▪ Projects coordination: provide input to Flexibility Engineer to harmonize design and methodologies

▪ Provide support to projects and procurements to solve non standards problems

▪ Define the modification of department work flow and dep technical standards

▪ Participate to the modification of company work flow and technical standardisation

▪ Collect project feed backs for continuous improvement implementation (Lesson Learned)

▪ Participate to vendor and outsourcing qualification

▪ Participate to project/company procurement strategy (Purchasing team)

▪ Develop and scout tools for simplified design activities

▪ Plan, control and manage outsourcing engineering center

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading international chemical manufacturing company.

About the role: The Production Engineer is responsible for improving the production technology of the upcoming plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures, and operation condition sheets in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, troubleshooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utility consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grades, new processes and equipment with the Production Technology Engineer.
• With a feasibility study, optimize plant operating efficiency, yield optimization, and energy conservation. Then, conduct the necessary field tests to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measures for customer complaints in a technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ findings and recommend modification, improvement, and potential investment projects such as debottlenecking, and environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with the technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked-up P&IDs and the required technical information for cost estimation purposes.
• Coordinate with the Technical department all plant improvement and modification activities working closely with the Technical Process engineer to prepare detailed
• engineering design, preparing specifications and requisitions for major equipment purchases, reviewing vendors’ documents, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with the Technical department for regular updates of P&ID’s, and instrument list, and equipment list.
• Communicate with the global process improvement team to build synergy for further technical updates of new plant.

About you:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.
• Demonstrated skill to in leadership, developing others, and working in a team-based environment.
• Outstanding verbal and written communication, presentation, interpersonal, creative thinking, consulting, and analytical skills.
• Excellent communication skills
• Ability to prioritize work to manage multiple projects to meet deadlines.
• Excellent problem-solving/decision-making skills.
• Ability to multi-task

Preferred qualifications:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction processes, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programing and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

*Please note that only shortlisted candidates will be contacted

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

The upcoming Eastern General Hospital (EGH) seeks to provide excellent healthcare and promote healing that is centred around each person. When operational, EGH will provide a comprehensive range of inpatient and outpatient clinical specialties and healthcare services covering emergency, acute and secondary care. EGH’s vision is to be a great hospital for the community and a great workplace for staff, and it seeks to do so by harnessing innovative technologies in patient care, journeying closely with patients and the community to lead healthier and more fulfilling lives, and being an employer of choice that empowers staff in their careers.

In this role, you will collaborate with clinical leads and planning teams to support the informatics requirements for ongoing operations and development of new services and capabilities, as well as promote patient safety and enhance productivity. Your responsibilities will include working with internal and external stakeholders to align informatics needs with the development of hospital services and operational plans, coordinating workflow simulations to test new models both virtually and on physical prototypes, facilitating procurement and resourcing for assigned projects, and supporting the hospital’s operational readiness, activation, and transition (ORAT) plans.

Additionally, you will facilitate coordination meetings with various project stakeholders and provide regular reports to the Hospital Planning Committee.

Job requirements

• Bachelor’s degree in Computer Science, Informatics or Engineering is preferred
• Minimum of 3 years of relevant work experience in local hospital setting is an advantage
• Strong knowledge and skills in project management, programming languages (C++, Python, Java, JavaScript), and technology adoption methodologies are highly advantageous
• Team player with excellent planning, analytical and communication skills
• Possess critical thinking skills and willing to think outside the box
• Ability to engage various stakeholders in a dynamic environment within a growing organisation
• Capable of working under pressure and adapting to challenging conditions