Total 1,904 service engineer job vacancies in d12 balestier serangoon toa payoh

• Participate in research and analysis to identify project requirements, conceptualizing plans, designing, and developing systems, establishing guidelines and goals, and creating strategy to optimize operational activities for new product introduction.
• Work with Engineering, Quality, Commodity and NPI to ensure success in new product development and launch.
• Manage and coordinate in earlier supplier involvement in new product introduction from part design phase through mass production, ensure critical timeline and target COSS are met.
• Ensures that Cost, Quality and Availability are achieved for product development phase and through their full life cycle.
• Manage supplier onboarding process and selection with integrity, alignment across value-chain and value engineering.
• Manage cost activities.
• Responsible in ensuring best-in-class cost, thru negotiation and/or tear down activities.
• Identifies cost drivers to influence design decision making towards target costing.
• Ensure product/module cost models and quotes are up to date at launch and effectively rolled out.
• Reviews and negotiates supplier terms and conditions exceptions to mitigate risk.
• Supports price negotiations with opportunities to drive short- and long-term cost reduction improvement.
• Builds strong, value-added relationships with suppliers, internal customers, and cross functional departments.
• Collaborates with Supplier Quality in the new supplier/component release process, including compliance and sustainability aspects.
• Partners Category team, ensuring BU product requirement and supplier technology alignment are included in building Commodity Strategy. Supporting and executing category strategy.
• Analyze lead times, identify critical paths, and prioritize demand requirements.
• Participates in project meetings/brainstorming sessions to identify solutions available.
• Performs other duties as assigned.

As a Quality & Reliability Assurance Engineer in Global Quality, we are encouraged to conduct electrical failure analysis and data analysis of next-generation 3D NAND memory devices. To sustain and improve Micron's memory quality, and developing outgoing monitor strategies together with risk assessment and product disposition in deviation management in HVM (high volume manufacturing( environment.

Responsibilities and Tasks

• Develop outgoing quality and reliability monitor strategies of NAND products in production phase.
• Perform product failure analysis on rejects to identify the failure mode and mechanisms that will lead to successful corrective actions and/or preventive actions.
• Assist and consult on post qualification quality and reliability issues and assist in the analysis and disposition of these materials.
• Coordinate with Research and Development and Product Engineering teams to comprehend new reliability issues and how to test for and assess their impact to customer risk and reliability.

Requirements

• Excellent problem-solving and analytical skills with strong attention to details.
• Ability to communicate clearly and concisely both verbally and in writing is essential in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work optimally in cross-functional teams and handle pressure situations in a professional manner.
• Candidates with at least 2 years of experience in the semiconductor industry as QRA or Product Engineer are preferred but fresh graduates are welcomed to apply. Experience in flash memory debugging and failure analysis is a plus.
• Bachelor's or Master's degree Electrical Engineering, Electronics Engineering, or a related discipline.

We are seeking a motivated and proactive Electrical & Electronics Engineering/ Electronics & Computer Engineering Intern to join our dynamic engineering team in Singapore. The intern will gain valuable hands-on experience in the design, development, testing, and troubleshooting of electrical and electronic systems. You will be working closely with experienced engineers and contribute to the ongoing development of projects that involve circuit design, hardware testing, and product development.

Role and Responsibiltities :

Circuit Design & Analysis: Assist in designing electrical and electronic circuits, including power supplies, analog and digital circuits.

Testing & Validation: Participate in testing prototypes, conducting experiments, and validating design specifications against real-world performance.

Hardware Prototyping: Help build and assemble prototype systems for various projects, ensuring accuracy and compliance with engineering standards.

Troubleshooting & Problem-Solving: Support the identification and resolution of issues in electrical/electronic systems, including testing components and sub-systems.

Documentation & Reporting: Assist in preparing technical documentation, test reports, and design specifications to support ongoing projects and future development efforts.

Collaboration: Work alongside with software developers/ engineer, and project managers, to develop integrated solutions.

Research & Development: Contribute to ongoing research in the field of electrical/electronics engineering, staying updated on emerging technologies and industry trends.

Ad-hoc Projects: Assist with various other engineering-related tasks, such as simulation work, software tools development, and equipment calibration.

Requirements:

Educational Background:

Currently pursuing a Diploma or a Bachelor’s degree in Electrical and Electronics Engineering, Electronics and Computer Engineering, or a related field.

Technical Skills:

Knowledge of circuit design and analysis.

Familiarity with Microsoft office e.g. Word, Excel, Powerpoint.

Basic understanding of microcontrollers (e.g., Arduino, Raspberry Pi).

Hands-on experience with oscilloscopes, multimeters, power supplies, and other lab equipment.

Understanding of embedded systems, PCB design, or power electronics.

Knowledge of industry standards and regulatory requirements for electrical systems.

Experience with CAD tools (e.g., AutoCAD ) for circuit board design is a plus.

Programming Skills:

Familiarity with programming languages (e.g., C ++, Python ).

Basic knowledge of embedded systems development is a plus.

Problem-Solving: Strong analytical and problem-solving abilities with attention to detail.

Communication Skills:

Good written and verbal communication skills to effectively collaborate within a team.

Team Player:

Ability to work in a team-oriented environment while also demonstrating initiative and independence.

Benefits:

Exposure to real-world engineering projects.

Mentorship and guidance from experienced professionals in the field.

Opportunity to develop skills in both hardware and software aspects of electrical/electronic systems.

Unified Communications (UC) Engineer/Analyst

Job Description:

• Primary handling voice incidents escalations
• Configuring and troubleshooting of CUCM, CME, Cisco Unity Connection, Cisco Unified CCX, Cisco IP Phones, Cisco IP Communicator, Cisco Jabber, Cisco Voice Gateways (SIP, H323, MGCP)
• Configuring Cisco IP Phones, Expansion Modules, Extension Mobility Profiles, Voicemail, Cisco Jabber, Cisco IP Communicator.
• Upgrading IP Phone firmware in CUCM and CME to fix vulnerabilities.
• Monitoring alerts, collecting traces and debugs for voice incidents involving call flow issues.
• Remediating all endpoints, gateways and servers and making sure all are 100% compliant.
• Engaging Cisco TAC and working along with them to resolve complex incidents.

Job Requirements:

• Degree / Diploma in computer or Electronics Engineering
• CCNP Cisco Collaboration certification
• Minimum of 14+ years of related IP telephony / Unified Collaboration /Telepresence implementation or Administration experience including some of the following:

-Knowledge with TELISCA Call Recording troubleshooting

-Setup & maintenance of Cisco Collaboration and meeting products such as CUCM, CUC, IMP, CMS, TMS.

-Capable to install, integrate, maintain, modify, improve, enhance and upgrade the hardware and software of the Cisco Collaboration products

-Experience in administration of Cisco UC servers in Cisco UCS platform

-Experience in setup & troubleshooting of H323, SIP Trunks, SCCP, MGCP Voice Gateways, etc

-Experience in Cisco IP Phones

-Experience in integration with AD, DNS, LDAP etc…

-Experience in Single Sign-On (SSO) setup and troubleshooting.

-Knowledge in Routing, Switching and Security

-Knowledge in Server, Local and Group Policy, User management, Services, etc

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

As a PDE Central Process Integration Principal Engineer, you will lead the development and integration of assembly and packaging processes for cutting-edge semiconductor products, such as DRAM, NAND, controllers, graphics, 3D-stacked (3DS) technologies, and High Bandwidth Memory (HBM). The ideal candidate will drive innovation in packaging technology and ensure seamless process integration during new product introductions.

This position involves working closely with multi-functional teams to research, design, and implement new packaging solutions while optimizing production yields and ensuring the successful commercialization of next-generation semiconductor technologies.

JOB RESPONSIBILITIES

Promote worldwide synergy

• Improve benchmark performance and efficiency gains through global project management and execution
• Network BKM leveraging and enhancement, business process creation and re-engineering
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Sites, TD, Product Engineering, Global Quality
• Help drive and fix the issue where necessary

Drive FE-AT Integration initiatives

• Business process governance between Fab – Assembly (WSPEC, FE2BE forum, WPSWAT)
• Lead & drive FE-AT excursions
• Yield, DPM related issues that involves both Fab – Assembly

Cross sites benchmark & achieve BIC yield performance

• Lead PI programs, PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow

Identify, Propose & Drive new initiatives programs

• Propose & lead strategic programs to shift left/ shorten cycle learning across TN phase (PD, NPI, HVM)
• Process flow simplifications & standardizations
• Cross technology streamline (Process, tools, etc)
• Sites expansions process & qualification requirements
• Drive roadmaps with multi-functional teams (FE, AT Procurement, APTD, APPDE)

JOB QUALIFICATIONS

• Bachelor's degree in Engineering (Electrical, Mechanical, Materials Science, or related field).
• 3+ years of experience in semiconductor packaging technology development, process integration, or new product introduction (NPI)
• Strong background in frontend fabrication processes (FAB)
• Proven experience in data analysis, statistical process control (SPC), and process optimization.
• Strong problem-solving skills, attention to detail, and a proactive approach to technology development.
• Excellent communication and teamwork skills, with the ability to work across departments and with external partners.
• Hands-on experience in the development and implementation of cutting-edge semiconductor packaging technologies.
• Experience leading multi-functional teams in process development, technology transfer, and ramp-up.
• In-depth knowledge of the latest industry standards and trends in semiconductor packaging and assembly.

As a PDE Central Process Integration (PI) Senior Engineer, you will lead the development and integration of assembly and packaging processes for cutting-edge semiconductor products, such as DRAM, NAND, controllers, graphics, 3D-stacked (3DS) technologies, and High Bandwidth Memory (HBM). The ideal candidate will drive innovation in packaging technology and ensure seamless process integration during new product introductions.

This position involves working closely with multi-functional teams to research, design, and implement new packaging solutions while optimizing production yields and ensuring the successful commercialization of next-generation semiconductor technologies.

JOB RESPONSIBILITIES

Promote worldwide alignment

• Improve benchmark performance and efficiency gains through global project management and execution
• Network BKM leveraging and enhancement, business process creation and re-engineering
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Sites, TD, Product Engineering, Global Quality
• Help drive and fix the issue where necessary

Drive FE-AT Integration initiatives

• Business process governance between Fab – Assembly (WSPEC, FE2BE forum, WPSWAT)
• Lead & drive FE-AT excursions
• Yield, DPM related issues that involves both Fab – Assembly

Cross sites benchmark & achieve BIC yield performance

• Lead PI programs, PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow

Identify, Propose & Drive new initiatives programs

• Propose & lead strategic programs to shift left/ shorten cycle learning across TN phase (PD, NPI, HVM)
• Process flow simplifications & standardizations
• Cross technology streamline (Process, tools, etc)
• Sites expansions process & qualification requirements
• Drive roadmaps with multi-functional teams (FE, AT Procurement, APTD, APPDE)

Requirements

• Bachelor's degree in Engineering (Electrical, Mechanical, Materials Science, or related field).
• 3+ years of experience in semiconductor packaging technology development, process integration, or new product introduction (NPI)
• Strong background in frontend fabrication processes (FAB)
• Proven experience in data analysis, statistical process control (SPC), and process optimization.
• Strong problem-solving skills, attention to detail, and a proactive approach to technology development.
• Excellent communication and teamwork skills, with the ability to work across departments and with external partners.
• Hands-on experience in the development and implementation of cutting-edge semiconductor packaging technologies.
• Experience leading multi-functional teams in process development, technology transfer, and ramp-up.
• In-depth knowledge of the latest industry standards and trends in semiconductor packaging and assembly.

Keen on the role? Apply now!

Salary -

CNC Experience - ($4,000 - $4,500) + transport allowance

No Experience - ($3,800 - $4,000) + transport allowance

Mon - Fri, 8am - 5:15pm

Job Description:

● To repair & service CNC machines in the region

● To implement service programmes for customer service

● Machine Installation

● Documentation (Service report, Machine registration, filing and record)

Job Requirements:

● Minimum Diploma in Electrical / Mechanical / Mechatronics Engineering

● Possess valid Class 3 driving license

● Minimum 2 years experience in servicing CNC Turning or/and Milling Machines

● Singaporeans only

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Responsibilities:

1. Responsible for packaging solutions and design, defining performance criteria for signal integrity (SI), power integrity (PI), and thermal performance.

2. Optimize power performance in packaging design, focusing on PI and SI parameters.

3. Manage collaboration and technical communication with packaging and testing vendors.

Requirements:

1. Bachelor’s degree or higher in Electronic Engineering, Microelectronics, Computer Science,

or a related field.

2. Minimum of 5 years of experience in packaging design and development, or experience in

project development at a design company.

3. Strong communication and coordination skills, teamwork spirit, and resilience under

pressure.

4. Proficiency in both written and spoken English and Chinese is a plus.

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 2 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA preferred
• Good communication and problem-solving skill

Benefits

1. Competitive Salary: Earn up to $3,000 basic per month plus variable bonuses and monthly incentives.
2. Work-Life: Flexible work schedule with office-in-lieu on public holidays and time-off for overtime.
3. Career Growth: Develop your skills with a fast-paced, dynamic team while gaining experience in customer service and operations.
4. Supportive Team Culture: Work in an inclusive, friendly, and collaborative environment where your contributions are valued.
5. Standby Perks: Receive a company phone for standby, with additional compensation (to be discussed during the interview).

Job Description

We are looking for a motivated and reliable Customer Service Officer to join our team! In this role, you will handle phone inquiries, manage data entries, and address customer complaints with the best solutions or alternatives. You will collaborate closely with the operations department to ensure smooth processes.

Roles & Responsibilities

• Handle phone inquiries and provide prompt and effective solutions.
• Perform data entries and maintain accurate records.
• Resolve customer complaints and provide alternative solutions when necessary.
• Work closely with the operations team to support service delivery.
• Take on other ad-hoc duties as assigned by the department.

Requirement

• Skills: Basic IT knowledge, good listening skills, and ability to work under pressure in a fast-paced environment.
• Personal Attributes: A good team player with strong interpersonal communication skills, meticulous attention to detail, and self-motivated.
• Work Schedule: Must be flexible to work shifts, on public holidays, and be willing to work overtime when required.

5) Additional Information

• Location: 88 Geylang Bahru, #01-2724, Singapore 339696.
• Salary: Up to $3,000 basic plus variable bonus and monthly incentives (company phone for standby).
• Working Hours: 8 am to 5 pm with varying schedules: Week 1 (6 working days), Week 2 (5 working days), Week 3 (6 working days), Week 4 (5 working days).
• Public Holiday: Work on public holidays will be compensated with office-in-lieu.
• Overtime: Overtime will be given time off.

Job Scope:

• Collaborating with project managers to understand project requirements, specifications, and expectations
• Participating in project planning and scheduling activities
• Inspecting construction sites regularly to monitor progress and ensure compliance with design specifications
• Implementing and maintaining quality control procedures to ensure the project meets industry standards and regulations
• Conducting tests on construction materials to ensure they meet required standards
• Collaborating with architects, engineers, and other professionals to coordinate activities and resolve design issues
• Provide technical solutions to problems encountered during the construction process
• Efficiently managing resources, including labour, materials, and equipment
• Implementing and enforcing safety protocols to ensure a safe working environment
• Conducting regular safety inspections and addressing any issues promptly
• Maintaining accurate and up-to-date project documentation, including daily reports, progress reports, and as-built drawings
• Keeping records of materials used, labor hours, and equipment usage
• Identifying and resolving construction-related issues and challenges as they arise
• Providing regular updates to project stakeholders on progress, challenges, and milestones
• Undertake any other duties assigned by management from time to time

Job Requirement:

• Master’s degree in engineering or a related field
• At least having 2 years relevant experience in engineering or site engineering in construction industry
• Strong knowledge of construction methods, materials, and processes.
• Familiarity with relevant construction codes, regulations, and safety standards.
• Proficiency in using construction management software and tools.
• Excellent communication and interpersonal skills.
• Problem-solving skills to address unexpected challenges.
• Attention to detail and a commitment to quality.
• Able to multi-task and work under tight schedules
• Strong negotiation and problem-solving skills
• Able to face challenging tasks and meet high standards and deadlines
• Able to attend to emergency call due to project and works needs beyond office hours
• 6 working days

We are regret that only shortlisted candidates will be notified.

Customer Service Delivery

~ Assist Customer In Refueling Their Vehicle

~ Traffic Control At Forecourt

~ General Housekeeping

~ Any Other Responsibility From Time To Time

~ Permanent

~ Part-Time

~ Rotating Shift

~ Near Tiong Bahru Market & Serangoon North Avenue 5

Location: Changi Aiport

Working Hours:

• Monday to Friday: 2 staggered time - 7am - 4pm / 10am - 7pm

Salary: Up to $2,800 (based on qualifications and experience)

Responsibilities:

• Provide 1st Level Technical Support via phone, remote assistance, and email.
• Escalate and track incident/service requests professionally and promptly.
• Provide onsite support as needed.
• Assist with additional administrative tasks as required.

Requirements:

• Minimum 6 months of experience in an IT service desk environment preferred.
• Strong written and oral communication skills in English.
• Excellent telephony and problem-solving skills.
• Self-motivated with a customer-oriented attitude.
• Ability to collaborate effectively in team environments

For interested applicant, click 'apply'

EA Reg no: R1328476
EA License No: 16C8443
EA Personnel Name: Melody
EA Personnel No: R2095899

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 36 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Responsibilities:

• Provide Level 2/3 network operations support
• Respond to incident calls and ensure the SLA to our clients is met
• Perform changes to the network in-line with the organization’s Change Management processes
• Ensure compliance to policies, processes and standards, both internal and clients’ organization
• Prepare network analysis reports, including findings with analysis
• Participate in regular operations review meetings, including operational issues, tickets review etc
• Participate in projects/activities to support improvement initiatives
• Conduct proper handover from the project team to operations after commissioning of projects.
• Conduct internal training and/or knowledge transfer to team.
• Update operations documentation (technical, CMDB, etc).

Requirements:

• At least 3 years of experience providing network operational and administration supporting Cisco products (Routers / Switches/WLAN)
• Diploma or Degree in Engineering, IT or its related field.
• Minimum Cisco CCNP certification
• In-depth knowledge of network routing and switching technologies and protocols
• Knowledge of network security, load balancing and optimization technologies
• Experience working with Cisco ACI, Bluecoat Proxy, F5 Load Balancer, Palo Alto or Checkpoint firewall is preferred.
• Ability to work in a multi-cultural team
• Good communication skills both written and verbal.
• Ability to prioritise work & multitask
• Analytical and possess good troubleshooting skills.
• Willing to work in extended hours and perform standby duty after office hour
• Experience in network automation via scripting (e.g. Python, Ruby) or tools (e.g. Ansible, Algosec, Chef)

Summary:

• Basic up to $4500
• Variable bonus
• Location: Serangoon
• 5 days work week, 8-6pm

Key Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electronics Engineering
• Min 2 years of relevant work experience in electronics manufacturing indusrty

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Basic salary: ($3200 - $4500)

Location: Serangoon

Working hours: Mon - Fri, 8.30am to 6pm

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to speak both English and Mandarin to liaise with Chinese speaking clients

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845