Total 2,722 Junior Executive system engineer job vacancies in Singapore

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

A research assistant position is available at the School of Electrical and Electronics Engineering at Nanyang Technological University of Singapore for a human-robot teaming project. We are seeking potential researchers in the area of localization and sensor fusion, especially applications of computer vision. Enthusiastic and self-motivated research candidates with strong publication record and research profile are welcome to apply.

The research assistant will be responsible for undertaking in-depth research in the human-robot teaming solution, and ensure the solution can be implemented and demonstrated in real life.  

Key Responsibilities:

• Design and develop new state-of-the-art localization and sensor fusion algorithms for human-robot teaming.

• Implement and conduct experiment to evaluate the performance in real life environment.

• Integrate solution with other work packages.

• Publish high-quality research papers with research outcomes in top-tier international journals and conferences.

Job Requirements:

• The candidate should have a Bachelor degree in Electrical and Electronic Engineering, Computer Engineering or related field, with at least 3 years of relevant experience.

• Candidates with strong publication record in relevant areas are encouraged to apply. 

• A thorough knowledge of the research field of localization and sensor fusion is highly preferred.

• Experienced in computer vision.

• Experienced in ROS.

• Excellent interpersonal communication and presentation skills in English.

We regret that only shortlisted candidates will be notified.

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

$2500 – $2800

5-day work week. Mondays to Fridays: 8:30am to 6pm

Office: Pandan Road Singapore

Transport: We have company bus departing near Clementi MRT station at 8.10am to bring staff to our office and a return company bus trip back to Clementi in the evening.

Job scope:

• Produce 2D engineering drawings using AutoCAD for fabrication and submission to client
• Produce 3D drawings for presentations
• Purchasing of materials
• Coordinate, schedule and supervise work assignments together with workshop supervisor
• Answer queries from salesperson and to provide quotations
• Supervise and conduct load test for the assigned equipment
• Prepare cost estimation
• Liaising with sub-contractors and suppliers and inter-department personnel
• Submission of final costing to Finance Department
• Control & record assets movement
• Update asset master list
• Dispose / transfer of asset
• Prepare & maintain documentation
• Assist in audit

Requirements:

• Diploma in Engineering or equivalent
• Working knowledge of 2D AutoCAD or 3D solidworks is an added advantage
• Proficient in MS Office

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Responsibilities

• Responsible for developing of test scripts, issues tracking and test management
• Responsible for conducting qualification test of new product or revised component with issuing of test report and recommendations to the test findings
• Responsible for testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)
• Responsible for preparation of samples and coordinate with PQS EN or certification bodies for product certification
• Responsible for evaluating and analysis of competitors’ products – teardown analysis, VA/VE

Requirements

• Min Diploma in Engineering or relevant
• Min 2 years of working experience in production quality or test lab.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for reading, interpreting and drawing up technical drawing specifications
• Responsible in developing, coordinating, monitoring all aspects of the operational set up for projects assigned
• Responsible for working cross-functionally with different teams and organizations
• Responsible for applying Six Sigma/Lean Manufacturing methodologies for continuous process improvements and to improve operational efficiency

Requirements

• Min Nitec in Mechanical Engineering or relevant discipline
• Min 1 years of working experience in manufacturing industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Duties & Responsibilities

• Specialize in processes and perform detailed troubleshooting and failure analysis
• Guide technicians and operators to achieve the required output and quality
• Check on supplementary materials changes to ensure they are properly done
• Assist the Engineer in checking on all control charts and checklists
• Ensure smooth production operation with production report done
• Monitor, troubleshoot, and improve production daily final test yield
• Perform maintenance and troubleshooting of machinery
• Any other jobs as assigned by the supervisor

Qualification

• Degree in Electronics / Mechatronics / Electrical / Mechanical discipline

Soft Skills Required

• Basic operation & manpower management knowledge
• Computer software knowledge in Microsoft Excel and Word
• Good communication skills

Others

• Cleanroom working experience would be a plus

A research assistant position is available at the School of Electrical and Electronics Engineering at Nanyang Technological University of Singapore for a human-robot teaming project. We are seeking potential researchers in the area of localization and sensor fusion, especially applications of computer vision. Enthusiastic and self-motivated research candidates with strong publication record and research profile are welcome to apply.

The research assistant will be responsible for undertaking in-depth research in the human-robot teaming solution, and ensure the solution can be implemented and demonstrated in real life.

Key Responsibilities:

• Design and develop new state-of-the-art localization and sensor fusion algorithms for human-robot teaming.
• Implement and conduct experiment to evaluate the performance in real life environment.
• Integrate solution with other work packages.
• Publish high-quality research papers with research outcomes in top-tier international journals and conferences.

Job Requirements:

• The candidate should have a Bachelor degree in Electrical and Electronic Engineering, Computer Engineering or related field, with at least 3 years of relevant experience.
• Candidates with strong publication record in relevant areas are encouraged to apply.
• A thorough knowledge of the research field of localization and sensor fusion is highly preferred.
• Experienced in computer vision.
• Experienced in ROS.
• Excellent interpersonal communication and presentation skills in English.

We regret that only shortlisted candidates will be notified.

Responsibilities

• Responsible for providing support on maintenance project.
• Responsible for handling system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

Requirements

• Min Diploma in Electrical/Electronic Engineering, Computer Science/ Information Technology or equivalent.
• Min 2 years of working experience in managing LAN / WAN / Routers / Switches / DNS / Firewall and Milestone System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Assistant Engineer

As a regional provider of network engineering services, the Assistant Engineer is to provide engineering support to ensure efficient operation of the project management.

If you are from Electrical and Electronics engineering field and keen to take up the challenges in telecommunications industry, we may be the team for you!

Responsibilities:

You will be responsible for:

• Assisting in RF indoor network design and pre-installation planning, and engineering report compilation.
• Measuring and processing of data, and providing a technical report.
• Liaising with customers for acceptance testing and project delivery timeline.
• Managing site access scheduling and coordination.
• Providing networking troubleshooting and monitor optimisation implementation.
• Administering system onsite commissioning and testing to meet the KPI.

Requirements:

• NITEC, Higher NITEC or Diploma in Electrical and Electronics engineering or equivalent engineering major.
• You have completed internship in telecommunication or similar experience in managing projects.
• Entry level candidate will be consider as training will be provided.
• You have good knowledge of using CAD software.
• Prior experience in using iBwave, NEMO and Spectrum Analyzer would be highly valuable.
• You have excellent communication and interpersonal skills.
• You are a strong team player who can manage multiple stakeholders.
• Demonstrate expertise in analysing and solving complex technical problems.
• Able to commit 1-year contract.

• Mon - Fri 8am to 5.30pm
• Permanent Role
• Great Career Progression

Job Description:

To support vertical repair for all customer probe cards in company factory following

• Knowledge on prober hands on to do probe card reshaping, all vertical repair processes
• Pin replacement
• All vertical repair processes like lapping/washing/baking etc.

1. Liaise with overseas end for any technical issues/new procedures etc.
2. Work with planners for the scheduled lead time, repairs etc.
3. Reports/trackers update for internal team
4. Support other sites if necessary
5. Any other ad hoc duties if needed.

Requirements:

• Diploma in Electrical / Electronics
• Experienced in Semiconductor will be an additional advantage
• Troubleshooting & Isolation of problems
• Able to read PCB schematics

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chong Kar Howe

EA Personnel Reg. No.: R23117793

[ Interior Design Out Fit / ACMV / Electrical / Fire Protection System / Plumbing ]

Salary: $3,000 - $3,800 (Salary can be adjusted for more experience)
Working Timing: Monday to Friday – 9 am to 6 pm
Working Location: Near Aljunied / MacPherson / Paya Lebar MRT

Overview:

We are under Construction & Engineering Firm Specialized in interior fit out works(Electrical, ACMV, Plumbing & Fire Protection)

Responsibilities:

• Maintains project team accomplishments by communicating essential information; coordinating actions; obtaining expert input; reviewing open issues and action items; contributing information to team meetings and reports; escalating project completion impediments.
• Day-to-day management on site, including supervising and monitoring the site and co-ordinate sub-contract works.
• Liaise with clients and consultants on project.
• Produce proper reports and documentation before and after project completion.
• Complies with codes and regulations by complying with requirements; preparing permit applications, plans, and compliance reports.
• Assist to update of As-Built drawing on site.
• And all other General Administration works as instructed.

Requirements:

• Minimum Diploma or equivalent.
• Min 2 years relevant experience
• Experience in project management (Able to handle Projects ), A&A works, M&E services, As-Built drawing, site supervision and coordination, compliances, and regulations.
• Knowledge/Related Experience in ACMV, Electrical, Fire Protection System, Plumbing and Sanitary Services, and installation of M&E Services on site

✅✅ Interested applicants kindly contact via WhatsApp: +65 8656 3696 (JOHN).

No Charges will be incurred by Candidates for any service rendered.

Email：[email protected]

Lau Zhao Rui Reg.No: R22109652

14C7279 The Supreme HR Advisory Pte Ltd

*Company name and address will only be disclosed once shortlist for interview.

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description

• Monitor systems performance and usage, including response times.
• Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting.
• Communicate regularly with technical, applications and operational staff to ensure systems integrity and security.
• Provide technical advice to the team and clients on installation, setup, configuration of systems.
• Implement plans to make systems available to users in a shared, secure and controlled manner.
• Identify complex system issues to provide advisory to the stakeholders.
• Develop automated processes to define, measure, and report on service quality, stability and capacity.

Requirements

• At least 2 years’ experience in developing, implementing and maintaining IT systems.
• Systematic in approach and familiar with enterprise level trouble shooting.
• Bachelor's Degree/Diploma in Computer Science, Engineering or equivalent.

Job Responsibilities:

• Participate in designing solutions that meet functional requirements
• Implement end-to-end specifications for solution components
• Generate relevant documents and reports
• Perform testing and implementation of solutions
• Participate in UX activities such as creating wireframes/storyboards, conducting user research/interviews and developing user stories, storyboards
• Contribute to the SDLC in the areas of coding tools, languages, and software designs

Job Requirements:

• Min Diploma/Degree in Computer Science or any IT related field
• Familiarity in any of the programming languages: Java, Javascript, Python, C++, C# etc
• Proficient in Web Technologies like HTML, CSS
• Excellent working attitude and a strong team player

Only Shortlisted candidates will be notified.

You may submit your resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for developing of test scripts, issues tracking and test management
• Responsible for conducting qualification test of new product or revised component with issuing of test report and recommendations to the test findings
• Responsible for testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)
• Responsible for preparation of samples and coordinate with PQS EN or certification bodies for product certification
• Responsible for evaluating and analysis of competitors’ products – teardown analysis, VA/VE

Requirements

• Min Diploma in Engineering or relevant
• Min 2 years of working experience in production quality or test lab.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

JOB SCOPE:

• Conduct testing and commissioning of the communications and control systems (CCTV system) for the project assigned
• Perform documentation, test plans and procedures
• Perform troubleshooting for Communication System
• Monitor and control project activities and schedule
• Coordinate with internal engineering department and client

REQUIREMENTS:

• NITEC / DIPLOMA in Electronics Engineering or any relevant engineering field
• With or without relevant experience welcome
• Basic Computer and Network knowledge

Please click "Apply Now" or send your resume to [email protected]/WhatsApp 80353296 if you are interested.

Job Scope:

• Perform maintenance on laboratory furniture and scientific instruments
• Provide installation, commissioning, and aftersales service
• Ensure accuracy, reliability, and confidentiality of all test reports
• Conduct risk assessments

Job Requirements:

• Minimum ITE/Diploma in Electrical/Mechanical/Mechatronics Engineering
• Able to perform hands-on repair and troubleshooting of equipment
• Able to understand Circuit Schematic Drawings
• Experience or knowledge in ISO/IEC 17025 will be an added advantage

For consideration, kindly submit your CV by clicking “APPLY NOW” or text +65 8124 8100 for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R22106909 | Fiona Jayne Yong Yee Wen

Responsibilities:

• Support the testing and commissioning of the system.
• Work closely with engineers to create plans, designs, and specifications.
• Conduct research, analyze data, and craft reports or presentations.
• Execute technical calculations and assessments.

Requirements:

• Minimum Bachelor's degree in a relevant field, preferred.
• Proven track record showcasing robust problem-solving skills and a meticulous attention to detail.
• Outstanding communication skills that foster effective collaboration within a team environment.

Responsibilities:

• Aid in the execution of comprehensive testing and commissioning procedures for the system.
• Work collaboratively with senior engineering personnel to contribute to the formulation of plans, designs, and specifications.
• Engage in extensive research, data analysis, and the preparation of detailed reports and presentations.
• Undertake technical calculations and evaluations to ensure the system's efficiency and reliability.

Requirements:

• Possession of a minimum diploma in a directly related field, showcasing a foundational understanding of the subject matter.
• Demonstrated proficiency in problem-solving techniques coupled with a strong inclination towards meticulous attention to detail in handling tasks.
• Exceptional communication prowess and a proven track record of effective teamwork and collaboration in diverse settings.

1) To support customer site for TP probe card on the following:

- Knowledge on prober hands on to do probe card reshaping

- Pin replacement

- All vertical repair processes like lapping/washing/baking etc

2) Liaise with HQ Italy for any issues / new procedures etc

3) Work with HQ planners for the scheduled lead time, repairs etc

4) Report / trackers update for internal and customer

5) Support other sites if necessary

6) Any other ad-hoc duties if required