Total 1,390 system technician job vacancies in d22 jurong jurong island tuas

Job Description:

• Integrate and install auto-mechanical/ electrical/ electronic subcomponents /robot/equipment according to process instructions
• Carry out calibration/acceptance test on sub-systems/robot/vehicle/equipment according to process instructions
• Perform functional checks, setting, testing, fault finding and failure analysis
• Service and troubleshoot of Auto-mechanical / Electronics / Electrical control system

Job Requirements:

• Minimum qualification of NITEC in Mechatronics/Electronics/ Electrical/Robotics & Smart Systems or related discipline
• Candidates with 2 to 3 years’ experience in automotive or relevant industrial experience will also be considered
• Perform troubleshooting and fault analysis on Hydraulic/Pneumatic/ Electronics/ Electrical systems
• Basic understanding of electrical/electronic circuit
• Able to perform analytical and diagnostics with measuring equipment like Digital Meter & Scope
• Advantage with class 3 driving licence
• Willing to travel overseas

JOB DESCRIPTION

· Define the architecture and design specification for in house video encoder and decoder, according to market requirement.

· Make assessment of the video encoder quality, either in house design or licensed IP.

· Work with IC design team to resolve the issues during design phase.

· Create test plan for the video encoder and decoder and qualify the design.

· Work with software team to develop the driver for the video encoder and decoder.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with IC design background

· Familiar with video compression technology, such as MPEG4, H264, H265, MPEG5, etc.

· Familiar with video quality assessment.

· Familiar with video encoding algorithm and video decoding compliance test.

· Familiar with architecture of video encoder and decoder RTL design.

· Knowledge in video/image pre and post processing is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Job Responsibilities

System Maintenance and Configuration:

• Install, configure, and maintain hardware and software for the organization’s infrastructure.
• Monitor system performance to ensure everything runs smoothly and securely.
• Regularly update systems to provide necessary patches and upgrades.

Network Management:

• Manage network servers and technology tools.
• Set up user accounts and workstations.
• Monitor network performance and integrity.

Security:

• Ensure security through access controls, backups, and firewalls.
• Frequently review security protocols and make adjustments as needed.
• Respond to and resolve help desk requests.

Data Management:

• Oversee data storage solutions and database systems.
• Ensure data recovery and backup procedures are in place and functioning correctly.
• Manage and store backups.

Troubleshooting and Support:

• Troubleshoot issues and outages.
• Upgrade systems with new releases and models.
• Provide technical support and training to other employees.

Documentation and Policy Development:

• Develop expertise to train staff on new technologies.
• Build an internal wiki with technical documentation, manuals, and IT policies.
• Document system performance and plan for future upgrades.

Collaboration and Communication:

• Work closely with IT project managers and other technical staff.
• Collaborate with other departments to understand their technical needs and implement IT solutions.
• Report regularly on operation status.

Job Requirements

• Degree/Diploma in Computer Science/Information Technology.
• Basic knowledge of computer networks/infrastructure.
• Strong analytical and problem-solving skills.
• Good understanding and possess troubleshooting know-how on IT infrastructure and software.
• Able to handle sensitive information confidentially.
• Minimum 2 years of experience in a similar field.
• Strong knowledge of MS 365 and Azure.

Key Roles and Responsibilities

• Assist the Site Project manager in monitoring and managing the day-to-day operation of the projects.
• To support Site Project Manager in managing day-to-day clients’ interactions and expectations for optimal results
• To support Site Project Manager to collaborate with peers, liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare and submit method of statement, sketches, site record and other technical submissions in a timely manner.
• To prepare Inspection and Test Plan, user manuals, drawings and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification, and submit technical clarification to the clients and consultants.
• Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Assist the Project Manager in the preparation of reports and presentation to management, clients and stakeholders.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act
• Perform any other tasks as and when required so as to meet project milestones

Requirements

• Min Diploma or Higher Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 3 years working experience
• Hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must
• Hands-on experience in security system configuration, System Networking and integration with third-party systems will be an advantage
• Willing to take ownership and Pro-active in Problem solving
• Must be a team player and strong verbal and written communication skills
• Customer service and business orientated with good initiative and adaptability
• Required to perform standby duties whenever required
• Driving License – Preferably if candidate possesses its own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road / Site Office
• 5.5 work days

What a System Interaction Engineer does at HP:

• Partner with the R&D, NPI and Manufacturing teams for both Supplies and Printer organizations to deliver on program deliverables.
• Define and design System Interaction testing to evaluate product performance and programs intent of meeting or exceeding customer experience.
• Collaborate with Supplies Quality team to analyze defects, understand root cause and define solutions to improve product quality.
• Automate and digitize current Test Flow for better efficiency and effectiveness.

Individuals who do well in this role at HP, usually possess:

• Bachelor's or master’s degree in Mechanical Engineering, Manufacturing Engineering, Electronic and Electrical Engineering, or equivalent.
• Typically, 0-1 years’ experience.
• Software development, python coding and RPA experience.
• Strong technical engineering leadership and capabilities.
• Effective leadership on planning, execution, and issue resolution.
• Demonstrated analytical and empirical problem-solving skills.
• Demonstrates growth mindset hallmark.
• System thinker, looking for connections, and comfortable with things being dynamic.
• Good flexibility and adaptability are key.
• Possesses strong teamwork and ability to collaborate with cross function teams.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

• Attractive Benefits Package
• 5 days work week
• Medical and dental benefit

THE PERSON:

– ITE Trade Certification

– 3-5 years in related field

– Electrical system and mechanical knowledge

– Technical and customer service

THE JOB:

– To provide service, diagnosing problems and troubleshooting equipment

– Replacing faulty equipment

– Be a team-player

– Training will be provided

• Conduct routine maintenance work (replacing fluids, lubricating parts etc.) aiming to vehicle functionality and longevity and repair work and report to workshop foreman for necessary technical assistance
• Inspect vehicle computer and electronic systems to repair, maintain and upgrade
• Inspect vehicle engine and mechanical/electrical components to diagnose issues accurately.
• Repair or replace broken or dysfunctional parts and fix issues (e.g. leaks)
• Has Experience in Automotive repairing, repair tyres,engine tune-ups, oil changes, gearbox repair, air-con & system diagnosis
• Any other ad-hoc duties as assigned

Jobs Requirements

• A minimum of 5 years’ experience in a similar role.
• Basic computer skills.
• Able to work independently and with a good working attitude
• Experienced/Responsible/Diligence.
• Strong team spirit.
• Must be able to work night shift and split shift
• Must be able to work extra hours or weekend if needed

Responsibilities

• Perform circuit troubleshooting and general failure analysis
• Perform installation, maintenance, repair, and replacement of all electrical jobs
• To execute work plan and ensure job compliance to quality standards
• Ensure compliance with safety regulations
• Able to understand job requirements and execute tasks given by team leader
• Attend to ad hoc job required for train, bus, and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience
• Able to perform assigned tasks physically, independently, or through team activities.
• Self-motivated, highly resourceful, and organized
• Self-disciplined to carry out tasks responsibly
• Work cooperatively in a team with other technicians to complete assigned tasks
• Have a positive and pleasant attitude.

Responsibilities

• Perform circuit troubleshooting and general failure analysis.
• Perform installation, maintenance, repair, and replacement of all electrical jobs.
• To execute work plan and ensure job compliance to quality standards.
• Ensure compliance with safety regulations.
• Able to understand job requirements and execute tasks given by team leader.
• Attend to ad hoc job required for train, bus, and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently, or through team activities.
• Self-motivated, highly resourceful, and organized.
• Self-disciplined to carry out tasks responsibly.
• Work cooperatively in a team with other technicians to complete assigned tasks.
• Have a positive and pleasant attitude.

Job Description:

• To record daily output data and submit to leader.
• Setting up machines during changeover of part.
• Trouble shoot production related quality issues.
• To attend daily morning briefing conduct by leader and provide status update.
• To communicate on the status on each machine before shift hand over.
• Ensure own responsible machines to be warm up before start of shift.
• To report any scrap or technical issue to leader faced during processing.
• To ensure respective in-charge machines are fully utilize.
• Inform leader if machine is faulty/down to avoid delay in delivery.

Prerequisites:

• Minimum ‘O’ Levels, Higher Nitec/Diploma in Engineering (Mechanical/Electrical/Electronics), or its equivalent.
• Minimum 2-3 years of working experience in production environment preferred.
• Experience in setup and operating single point diamond turning machine.
• Preferably some years of work experience in related or relevant work experience in optics manufacturing.
• Must be able to understand and communicate in English.
• Able to carry heavy items (segments or tooling).
• Willing to perform rotating shifts.

Responsibilities

• Perform circuit troubleshooting and general failure analysis.
• Perform installation, maintenance, repair and replacement of all electrical jobs.
• To execute work plan and ensure job compliance to quality standards.
• Ensure compliance with safety regulations.
• Able to understand job requirement and execute task given by team leader.
• Attend to ad hoc job required for train, bus and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Job Summary

The Sales Engineer will be based in Singapore and is accountable to generate profitable sales revenue and increase operating income by broadening sales coverage, establishing new accounts, and providing total solutions for compressed air to customers in Singapore.

Responsibilities

• Identify and source new clients and business prospects (e.g., perform outreach to cold leads via calls and emails).
• Achieve sales target set for area of responsibilities and industries by building and maintaining close relationships with customers (incl. customer visits) to solicit for orders.
• Negotiate tender, contract terms and condition and prepare Sales contract.
• Prepare sales report, analysing cost and sales, quotations and maintaining and creating new client accounts.
• Provide pre-sales technical assistance (incl. demonstration & technical presentations), product training and after-sales support.
• Attending trade shows, conferences, marketing, and other events.
• Work closely with supply chain management, sales support and project engineer and order fulfilment team.

Basic Qualifications

• Degree / Diploma in Mechanical Engineering or related fields.
• Sales experience with industrial products such as Air Compressors, Dryers, or other similar industrial equipment.

Travel & Work Arrangements/Requirements

Office-based, will be required to travel within Singapore to meet clients or overseas for business needs.

Key Competencies

• Customer Orientation
• Ownership
• Business Awareness

What we Offer

• Commissions
• Equity Grant
• Employee Insurance (Incl. Dependants)
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental
• Annual, Sick, Hospitalisation, Marriage, Exam, Compassionate, Maternity, Volunteerism Leaves.

The Service Engineer is responsible for carrying out after sales field service jobs including testing & commissioning, servicing, troubleshooting and overhaul of Ingersoll Rand’s air compressor at our installed bases. He/she will require technical knowledge of compressed air systems, customer orientation and strong ownership mindset to be successful in this role.

Responsibilities

• Perform installation, inspection, diagnose, maintenance and rectification on compressed air system at various commercial and industrial establishments.
• Conduct site and classroom training to customers on compressed air system.
• Recommend necessary actions to improve the efficiency and reliability of customer’s compressed air system.
• General service report writing for internal and external customers.
• Document and prepare field service quality reports. If there are quality problems, it is necessary to feedback specific product defects to the production department and assist customers to take corrective measures.
• Provide technical support for the Industrial Technologies & Services (ITS) products, including but not limited to Compressed Air System, Air Dryers System, Air Audit and IIOT system.

Basic Qualifications

• Degree in Mechanical/Electrical Engineering with strong field service experience in compressed air systems and PLC panel programming or related.
• Singapore Class 3 driving license.

Travel & Work Arrangements/Requirements

Office & Site-based within Singapore for field service jobs at installed bases.

Key Competencies

• Customer Orientation
• Ownership
• Independent
• Basic software applications such as Microsoft Office (e.g., Excel, Word, Outlook) and corporate systems (e.g., SAP).

What we Offer

• Equity Grant
• Employee Insurance
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental
• Overtime & Allowances

Responsibilities:

• Inspect and troubleshoot equipment and machine.
• Perform preventive maintenance to achieve minimal to zero machine downtime.
• Source replacement parts.
• Repair and replace faulty parts & equipment.
• Carry out minor fabrication
• Carry out building maintenance and service
• Comply to all risk control measures and adhere to safe work procedure according to WSH (Risk Management) requirements while performing assigned work duties.

Requirements:

• Rich experience as a technician especially on machine maintenance and repair
• Electrical, electronic and mechanical knowledge
• Detailed with problem-solving skills

Roles & Responsibilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

1. Carry out all preventive, predictive and corrective maintenance as directed by the Supervisor and clear completed work from the CMMS data base.
2. Responsible for the proper maintenance on various rotating and static equipment and systems including the plant piping systems and structural support systems.
3. Response and resolve work orders for any mal-functioning for static and rotating equipment in the facility. Ensure minimum down time or timely repairs of production equipment.
4. Determine materials, spares, tools and method required to complete maintenance task safely.
5. Plan and execute machinery condition monitoring and field data collection with production team and engineers.
6. Ensure all plant valves are fully operational and all mechanical components properly grease and lubricated where applicable, including carry out, strip, redress and rebuild of various types of control and plant valves.
7. Supervise and work closely with in-house contractor and equipment vendor to execute maintenance work at the terminal. Ensure safeguards are followed such as valid work permit are issued, wearing prescribed personal protection equipment etc.
8. Liaise with production team with all aspects of mechanical system testing, running, trouble-shooting, carry out material specification checks on all installed piping components such as gasket, bolts, etc.
9. Able to take on additional tasks or responsibilities as assigned by superiors.
10. Able to perform valve line up & LOTO for operations or maintenance preparations.
11. The incumbent shall be part of the Company's Emergency Response Team(CERT) and perform any assigned roles and responsibilities (ie fire fighter etc) for such purposes.

Work Experience

1. Minimum of 3-5 years practical experience in the oil and petrochemical refinery.
2. Experience in hands-on troubleshooting of mechanical/ machinery systems i.e compressor/pump and diesel/gas engine.
3. Familiar with Permit to Work system and local codes, regulations and standards requirement.
4. Proficient in usage of Microsoft Office and trained in the use of the Computerized Maintenance Management System (CMMS); ie SAP.
5. Ability to speak, write and communicate effectively in English.
6. Experience with LNG/Natural Gas or gas engine generator maintenance and operations will be an added advantage.
7. In addition, successful candidate should possess the following personal attributes:

• A team player who can work well in a team and with good listening skill
• High self-motivation with the ability to work with minimal supervision & adapt to changing priorities and assignments.
• Willing to take up new challenges and responsibilities
• Fast learner

Education Requirement

The candidate must possess a Professional Certificate/NiTEC, Diploma in Engineering (Mechanical/ Mechatronic/ Electromechanical) or equivalent.

Job Duties and Responsibilities:

• Perform daily operational activities which includes attending to customers' enquiries, needs and complaints
• Perform preventive and breakdown technical support and maintenance for mechanical/electrical services, maintenance of blower systems and electrical/electronic control systems.
• Require travelling within Singapore.

Minimum Requirements:

• Minimum ITE graduate with 1 year experience or without any working experience in Mechanical, Electrical, Instrumentation or Electronic & Computer Engineering field are welcome to apply
• Having own transport will be advantageous but not compulsory.
• Hard worker and able to adapt and learn fast.

Benefits:

• Stable career
• Guaranteed PB
• Guaranteed AWS
• Up $2,800

Job Description

• Pack and dispense prescriptions; provide patient counseling on medication use.
• Maintain equipment and ensure a clean, hygienic pharmacy environment.
• Monitor stock levels, check expiry dates, and ensure proper storage of medications.
• Assist with repackaging, conduct quality control, and ensure IT/Automation systems are functioning.
• Perform additional tasks as assigned by the Reporting Officer.

Requirements:

• Diploma graduate in Pharmaceutical Sciences/ Graduates of the Certified Pharmacy Technician Course

Alternatively, you may send your application and resume to [email protected]

**We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

For a faster response, you may contact 6990 0456 via WhatsApp with the following details:
Name:
Position applied:
Location:

Megan Chan Xin Yi
Registration Number: R24123277
EA License No: 06C2859 (MCI Career Services Pte Ltd)

Company Overview

Atera Water is a Singaporean water technology start-up, specialising in providing filtration membrane solutions for water and wastewater treatment. The company specialize in economically viable and environmentally friendly filtration technologies, designed to empower communities to tackle water challenges amidst climate change and high costs of advanced filtration membranes.

The company is scaling up our membrane production for pilot and commercial projects in SEA region. We are looking for full-time technician to support the manufacturing of membrane products.

Responsibilities

1. To support membrane manufacturing activities, which includes fibre spinning, looping, stretching and treatment process.

2. To assist in managing inventory of raw materials, components, and finished products

3. To maintain proper records of each batch of newly manufactured products and ensure proper labelling and documentation.

4. To assist in preventive maintenance, checking, inspection and troubleshooting of manufacturing equipment.

5. To ensure that membrane products are manufactured with appropriate quality and on schedule with project or customer requirement.

6. To comply with standards, regulations and safe work practices.

7. To provide supporting duties for product testing, when required.

Requirements

· Minimum Higher NITEC/Professional Certificate in Engineering or Manufacturing or equivalent

· Diploma without experience is welcome to apply and willing to be trained

· Experience in polymer processing and extrusion processes would be an advantage

· Possess a positive attitude and sense of urgency

· Meticulous, keen attention to details and organized.

· Team player and able to work independently

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Perform hands-on mechanical/electrical assembly tasks within the standard time
• Ensure that the assembled machine is according to Makino's quality standards
• Responsible for keying the operation time into EES for performance measurement
• Responsible for housekeeping and ensuring that the assigned machine area is clean and tidy
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job requirements:

• Minimum NITEC/Higher NITEC in Mechanical/Electrical Engineering, or a related field
• Experience working in Assembly/Production is an added advantage
• Able to work shifts and commit to overtime on weekdays and weekends when required
• Able to handle physical work and stand for long hours
• Able to read and interpret drawings
• Have the initiative to learn and produce quality outcome
• Responsible and committed to the assigned task
• Team player and able to work independently

Interested in Automation and love getting your hands dirty? Curios about how electrical processes works and investigating their functions? Field Fault Analysis - Put your investigative traits to the test by determining the cause of failure behind instruments and equipment. Field Calibration of Instrument - Be involved in projects, calibrate and install instruments to Valves including Pneumatic, Electronical and Digital Equipment.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

• Engage in the installation, repair and maintenance of various technology-based equipment.
• Conduct regular checks and troubleshooting to ensure the technical equipment operates at its optimal performance.
• Provide on-site assistance with hardware and software use and address and resolve technical issues faced by clients or customers.
• Carry out diagnostic tests and analyses to identify the roots of technical issues.
• Liaise with team members and communicate with stakeholders in layman's terms to assess needs and system requirements.
• Record and document instances of hardware failure, repair, installation and removal.
• Stay up to date with technical developments and advancements in allied fields.

Requirements

• working hours : 7:30am - 5:15pm (5.5 days)
• Nitec in Mechanical/Mechatronics

Job Description & Requirements

Key Responsibilities :

o Perform routine and preventative maintenance tasks on industrial packaging machines and equipment;

o Carry out repairs, troubleshooting, and maintenance work on mechanical and electrical systems;

o Keep records of maintenance and repair work, including ensure spare parts inventory equipped at all times;

o Maintain a clean and organized work area, adhering to safety and efficiency standards;

o Ensure maintaining spare parts inventory levels and ensuring proper care and protection of maintenance tools and equipment;

o Assist Maintenance Chief to identify and implement continuous improvement initiatives;

o Obtain quotes from suppliers and internet purchases for comparison to achieve the most cost effective solutions while maintaining quality standards;

o Provide weekly updates on the status of ongoing maintenance tasks, servicing issues, and outstanding parts orders.

Requirements :

o Minimum 5 years of experience in maintenance, repair, and troubleshooting of industrial machinery, preferably in a beverage manufacturing environment;

o Diploma, NITEC, NTC-2, or ITC in Mechanical, Mechatronic, or Electrical Engineering;

o Competent in Microsoft Office preferred - outlook, excel, word, and CAD;

o Knowledge of industrial machinery, including packaging equipment, conveyor system, boiler, chiller, compressor and cooling tower etc;

o Familiarity with Electrical motors (AC/DC), Pneumatic and hydraulic systems, Valves and actuators, Pumps, Gearboxes and transmission systems, Sensor technologies (e.g., temperature, pressure, level, flow), Boiler and chiller systems, Water treatment systems, Packaging machinery and Material handling equipment.

• To perform general maintenance duties in building & machineries & equipments.
• To perform preventive maintenance on machines & equipments bt cleaning, lubricating, greasing etc for optimization.
• To perform minior electrical work not requiring licence such as office lighting, appliances etc.
• To apply paint or varnish all types of surfaces for protection
• Perform related duties as required such as external support or repair
• To assist in recording facility utilities.
• To carry routine inspections on all operating machineries & equipments
• To ensure all ad-hoc work are carried out

Minimum ITE with relevant fields

Able to work as a team

Efficient and adhere to KPI's given

Conform to WSH guidelines

Work at height certificate a plus

JOB SUMMARY:

The Engineering Technician is responsible for ensuring the efficient operation of all hotel facilities, systems, and equipment to guarantee guest comfort, safety, and satisfaction. This role requires proactive maintenance, repair work, and troubleshooting to address any technical issues within the hotel. The Engineering Technician will work closely with other hotel departments to support operational needs, uphold safety standards, and ensure that all technical systems function properly, contributing to an overall exceptional guest experience.

WHAT YOU WILL BE DOING:

• Guest and Facility Support:Ensure the smooth operation of all hotel systems, including HVAC, plumbing, electrical, and mechanical systems, for the safety and comfort of guests.
  Respond promptly to guest requests and issues related to the hotel’s facilities, ensuring minimal disruption and maximum satisfaction.
  Carry out preventive maintenance tasks, addressing any technical issues before they impact guests.
  Assist with repairs of guest rooms, public areas, and common hotel facilities, ensuring guest comfort and operational efficiency.
  
• System & Equipment Management:Regularly inspect hotel equipment, including heating, cooling, plumbing, and electrical systems, to ensure proper operation and compliance with safety standards.
  Perform troubleshooting and repairs to hotel systems, machinery, and equipment, identifying and resolving issues quickly and effectively.
  Maintain a clean and organized mechanical room, ensuring all tools and supplies are readily available and properly stored.
  Document maintenance activities, including repairs and inspections, in the Duty Log to ensure clear communication and follow-up on any unresolved issues.
  
• Safety & Compliance:Ensure compliance with all safety protocols, building codes, and hotel standards.
  Respond to emergency situations, including fire alarms, water leaks, or power failures, ensuring a safe and quick resolution.
  Conduct safety checks on all hotel systems and infrastructure to identify and prevent potential hazards.
  Assist in emergency drills and safety training, ensuring the hotel staff is well-prepared for any situation.
  
• Collaboration with Hotel Departments:Work closely with other hotel departments, including housekeeping, front desk, and security, to address maintenance issues promptly and prevent any inconvenience to guests.
  Assist in setting up and maintaining hotel equipment for special events or large group functions as needed.
  Provide technical support to other hotel staff, offering guidance or assistance on maintenance-related tasks when necessary.
  
• Other Operational Duties:Ensure that all hotel vehicles, including buggies and other transport equipment, are properly maintained, clean, and in working condition.
  Recharge and maintain the hotel's buggy fleet, ensuring it is operational and ready for use by guests and staff.
  Maintain a tidy and organized environment in all work areas, ensuring that tools and supplies are stored appropriately.
  Perform other duties as requested by supervisors or hotel management to support the hotel's operational needs.
  

YOUR EXPERIENCE AND SKILLS INCLUDE :

• Strong verbal communication skills, allowing for effective communication with guests and hotel staff.
• Ability to work cohesively with a team, building positive relationships with colleagues and departments.
• A proactive, solutions-oriented mindset, with an ability to stay calm and professional in urgent situations.
• Strong attention to detail and a commitment to providing high-quality service.
• Ability to work in a multi-cultural environment, demonstrating respect and understanding for diverse guest needs and backgrounds.

Qualifications:

• Secondary/High School education required; technical certifications in engineering or maintenance preferred.
• Possess a valid driving license.
• Minimum 1 year of experience in hospitality, facilities management, or a technical role.
• At least 2 years of experience in maintenance, repair, or engineering, with hands-on experience in troubleshooting systems and equipment.
• Previous experience in a hotel or similar service environment is an advantage.
• Knowledge of building systems, including HVAC, plumbing, electrical systems, and mechanical equipment.