Total 430 technical analyst job vacancies in D16 Upper East Coast, Bedok, Eastwood, Kew Drive

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Stand in rate to be discussed during interview.

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO shall preferably possess a Diploma from Polytechnic or Workplace Safety & Health Coordinator or possess Advanced Certificate in Workplace Safety and Health or relevant qualifications.
• The RTO shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

Duties & Responsibilities:

• Report and provide assistance to QAQC Engineer & Senior Inspector
• Inspection of the completed tunnel precast elements
• Keeping of Quality Control (QC) records at all stages of the segmental tunnelling lining production
• Testing and examining the materials used
• Checking on the workmanship of the manufacturer in connection with the tunnel precast elements production
• Inspect and checking of defects of production phase of tunnel precast elements and provide finding and recommendation on remedial measures to mitigate the defects

Requirements:

• A Civil Engineering Diploma recognized by the Professional Engineer (PE) Board, Singapore, or its equivalent as accepted by the OIC
• Min. 3 years of relevant experience in the inspection and quality control monitoring of high quality, mass produced precast concrete products
• Will be stationed full time at precast yard.
• Require valid RTO Certification
• Must have SSSS certification

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO-building shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO-Geo shall preferably possess a Diploma from Polytechnic or relevant qualifications.
• The RTO-Geo shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• The RTO-Geo shall have a certificate in Building Construction Supervisors Safety (BCSS) Course.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all works including all civil and architectural works, plumbing, sanitary, drainage, irrigation and sewer system, commuters facilities, road works, trial trenches and utilities diversion etc.
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems systems and gantry crane and submit evaluation report endorsed by a PE
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works associated to micro-tunneling and mining, Flyover works, sewer diversion (including shaft construction and pipe-jacking operations.

Requirements:

• Diploma or Degree in Civil and Structural Engineering
• At least 4 years’ of experience, of which 3 years experience in either geotechnical works or airport construction.
• Possess a valid RTO cert by IES Singapore

InfoCepts is a global leader of end-to-end data & analytics solutions with nearly 20 years of experience, also named as Gartner’s 2020, 2021 and 2022 customers’ choice for Data & Analytics providers. We continue to grow rapidly year over year, now employing more than 1,000 people in offices across the globe. As we have grown, we have stayed true to our mission—to always help our customers stay modern that help them make smart, data-driven decisions. Since 2004, we have deployed hundreds of high performance analytics applications over web and mobile platforms, built several advanced analytics models, processed petabytes of data using Big Data technologies and delivered several high impact business solutions. Driven by our vision of delivering great customer experiences, we are looking for professionals who are passionate about making the world a better place by leveraging the power of data.

We are hiring aspiring / proven data analysts to join us in our cause of helping customer Stay Modern, ahead of the technology curve!

Roles and Responsibilities

• Using automated tools to extract data from primary and secondary sources
• Removing corrupted data and fixing coding errors and related problems
• Developing and maintaining data in databases, data systems – reorganizing data in a readable format
• Performing analysis to assess quality and meaning of data
• Filter data by reviewing reports and performance indicators to identify and correct code problems
• Using statistical tools to identify, analyze, and interpret patterns and trends in complex data sets that could be helpful for the diagnosis and prediction
• Preparing reports for stakeholders stating trends, patterns, and predictions using relevant data, with the aim of driving stakeholder action on their businesses/functions
• Building dashboards and curating data stories for use cases

Skills Required

A successful data analyst needs to have a combination of technical as well leadership skills. A background in Mathematics, Statistics, Computer Science, Information Management, Engineering, Sciences or Economics can serve as a solid foundation to build your career as a data analyst.

• 1 - 2 years of data analytics and modelling experience
• Strong proficiency in Python and SQL scripting skills
• Prior experience with at least 1 BI tool such as Tableau, PowerBI, QlikSense and/or similar software is essential
• Knowledge of how to create and apply the most accurate algorithms to datasets in order to find solutions
• Knowledge of at least one database tool such as MySQL, MS SQL and/or PostgreSQL
• Strong mathematical skills to help collect, measure, organize and analyze data
• Adept at queries with good communication and stakeholder management skills

This is a 12-month contract Contigent Workforce, 100% work-from-home role.

This role will be focused on the functional scope of workforce management and risk management. Providing support on vendor operational and risk process audits, workforce management administration, and vendor adherence to the agreed KPIs.

Responsibilities

• Manage the vendor adherence to service level agreements for the outsourced sales operations.
• Collaborate with vendor workforce management POC at the vendor sites to ensure the implementation and compliance to established KPIs (key performance indicators).
• Develop and maintain regional workforce management KPI reporting for senior management.
• Maintain a log on vendor operations exposure to risk and share findings with regional Sales Productivity PMs.
• Conduct operational process audits and ensure closure of the corrective actions required at the vendor level.
• Identify and provide feedback on bottoms-up tool and workforce management process efficiency gains with analytical perspective.

Skills

• 5+ years’ experience in vendor operations, change management or operational process improvement role.
• Must be good with managing and understanding the data (SQL, Tableau, PowerBI).
• Process and detail-oriented execution style.
• Critical thinker and resourceful problem-solver
• Comfortable with ambiguity and thrives in a fast-paced, dynamic environment.
• Receptive to open feedback
• Bachelor's Degree preferred

UEN: 199700895N

Key Responsibilities:

• Must To Have Skills: Proficiency in .Net Full Stack Development, Docker, and Kubernetes.

• Good To Have Skills: Experience with Microsoft Azure Architecture.

• Strong understanding of software development principles and methodologies.

• Experience with Agile development methodologies.

• Solid grasp of software testing and debugging techniques.

Roles & Responsibilities:

• Design, develop, and maintain software applications using .Net Full Stack Development.

• Utilize Docker and Kubernetes to deploy and manage applications in a containerized environment.

• Collaborate with cross-functional teams to analyze, design, code, and test multiple components of application code.

• Perform maintenance, enhancements, and/or development work on software applications.

• Ensure software applications are scalable, reliable, and maintainable

Job Summary

We are looking for Technical Business Analyst to plan, conduct and support the project discussion and workshops with the business users including documentation.

Mandatory Skill-set

• Bachelor in Computer Science, Computer Engineering, Information Technology & Engineering;
• At least 3+ years of working experience as a Business Analyst in project setting within Engineering and Smart Operations Industry;
• Proficient in gathering and documenting business requirements, creating functional specifications, and user stories;
• Experience in conducting HMI/SCADA Graphical User Interface (GUI) development and user journey workshops;
• Experience in facilitate technical discussion (smart operations, telemetry network, meter alarm management, control room layout planning) and documentation;
• Excellent analytical and problem-solving skills, with the ability to think critically and strategically;
• Strong interpersonal and communication skills, with the ability to effectively communicate complex ideas to both technical and non-technical stakeholders;
• Must be able to work independently and collaboratively in a fast-paced environment;
• Attention to detail and commitment to producing high quality, accurate work;
• Good communication, interpersonal, and written skills.

Desired Skill-set

• IIBA Business Analysis certification.

Responsibilities

• Responsible to facilitate technical discussion and workshops with various business engineering teams and create functional (technical) specifications as well as user stories;
• Conduct HMI/SCADA Graphical User Interface (GUI) development and user journey workshops including pre&post workshop documentations;
• Gather, collate, and analyze the technical requirements and provide clear functional specifications for the end-to-end proposed solution;
• Validate the documented requirements with business stakeholders to ensure accuracy, completeness, and alignment with business objectives;
• Devise comprehensive test plans (including test scenarios and test cases) to test IT deliverables;
• Consult Solution Architect or Software Design Manager for technical requirements and validations.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO-building shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO-Geo shall preferably possess a Diploma from Polytechnic or relevant qualifications.
• The RTO-Geo shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• The RTO-Geo shall have a certificate in Building Construction Supervisors Safety (BCSS) Course.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all works including all civil and architectural works, plumbing, sanitary, drainage, irrigation and sewer system, commuters facilities, road works, trial trenches and utilities diversion etc.
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems systems and gantry crane and submit evaluation report endorsed by a PE
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works associated to micro-tunneling and mining, Flyover works, sewer diversion (including shaft construction and pipe-jacking operations.

Requirements:

• Diploma or Degree in Civil and Structural Engineering
• At least 4 years’ of experience, of which 3 years experience in either geotechnical works or airport construction.
• Possess a valid RTO cert by IES Singapore

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Stand in rate to be discussed during interview.

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO shall preferably possess a Diploma from Polytechnic or Workplace Safety & Health Coordinator or possess Advanced Certificate in Workplace Safety and Health or relevant qualifications.
• The RTO shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

Duties & Responsibilities:

• Report and provide assistance to QAQC Engineer & Senior Inspector
• Inspection of the completed tunnel precast elements
• Keeping of Quality Control (QC) records at all stages of the segmental tunnelling lining production
• Testing and examining the materials used
• Checking on the workmanship of the manufacturer in connection with the tunnel precast elements production
• Inspect and checking of defects of production phase of tunnel precast elements and provide finding and recommendation on remedial measures to mitigate the defects

Requirements:

• A Civil Engineering Diploma recognized by the Professional Engineer (PE) Board, Singapore, or its equivalent as accepted by the OIC
• Min. 3 years of relevant experience in the inspection and quality control monitoring of high quality, mass produced precast concrete products
• Will be stationed full time at precast yard.
• Require valid RTO Certification
• Must have SSSS certification

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

Responsibilities

• Perform AML monitoring/review on Trade post-transaction files.
• Review/investigate Trade manual screening alerts and red flag escalated by trade processing team for potential sanction violations in accordance with SMBC policies.
• Ensure that review and investigation conclusions are adequately and properly documented for regulatory/audit level review.
• Coordinate and/or prepare the required management information reporting data as applicable
• Perform daily name screening alert clearance
• Investigate and report discrepancies and irregularities arising from transactions, system failure, etc and resolve issues including handling stakeholder’s complaints and escalating all issues to Group Head / Deputy Group Head promptly.
• Other tasks as assigned by Group Head / Team Lead
• Regular update of Procedures and Manuals to ensure the group operations is in accordance to SMBC policies, audit comments and in compliance to local as well as related overseas law and regulations
• Contribute in key initiatives and other ad hoc projects as needed

Requirements

• Bachelors degree
• Able to link diverse information to build a full picture and spot inconsistencies
• Possesses knowledge of MAS regulation on AML and Sanctions requirements including KYC, Screening
• Strong team player
• Good communications skills, hands on, independent and proactive in carrying out investigation on customers and/or transactions. Able to work with front office and back office

Job Responsibilities

• Prepare drawings using AutoCAD, SolidWorks
• Liaise with staff in overseas factories and prepare technical product drawings for marketing purposes such as proposal cut sheets, installation drawings, user guides & instruction manuals
• Prepare technical product specifications/drawings for the purchasing team to communicate with the supplier and liaise with the supplier whenever technical information is requested
• Prepare multiple versions of designs for review by engineers and architects
• Document and file on 2D and 3D product drawings & renderings
• Implement changes to engineering drawings when necessary
• Other ad-hoc job duties as assigned

Job Requirements:

• 1-2 years of relevant working experience
• Completed minimum 1-year working/industrial attachment experience in construction-related or technical product field is a bonus
• Hold a minimum qualification of a Higher Nitec/Diploma in Mechanical Engineering/Design Engineering or equivalent
• Have prior technical experience in using AutoCAD, SolidWorks, or Rhino 3D candidates without formal qualifications will be considered
• Other software such as Photoshop, Illustrator, 3D Max, Revit (BIM), and SAP is an added advantage
• Be able to read architectural, structural, ID, and M&E trading drawings

Description

PRINCIPAL DUTIES AND RESPONSIBILITES

• General Scope:

o Provide on-site technical support for PCs (software and hardware), voice equipment & mobile device (Smartphone and Tablet)

o Physically set up computers and software system installation

o Perform basic hardware moves and changes

o Record and manage all incidents and requests in ticket-tracking system

o Ensure timely resolution of issues by acquiring necessary information to best measure impact to the customer

o Develop and update new and existing process

o Proactively inform management of trends, significant problems and expected delays

o Provide other IT-related support as required by the business

o Documentation of products support and processes

o Update and manage inventory on new incoming hardware orders

o Communicate with vendors for incoming hardware orders and repairs

• Project Focus:

o Resource will need to assist users to migrate BYOD (Bring your own device) to CP (Corporate phone) where device platform includes iOS and Android

o Support includes but not limited to, assist user to setup new phone, troubleshooting during migration, get user sign off to show work completion, inventory tracking and reporting

Qualifications

LANGUAGE

• English: Advanced level - strong verbal, written, listening communication experience

EXPERIENCE

• 2 to 5 years of IT support experience

• Solid understanding of PC hardware/peripherals

• Exposure of mobile OS such as Apple iOS and Google Android

• Good working knowledge and IT experience supporting Microsoft Windows configuration, desktop administration, Microsoft Office suite

• Basic understanding of network and server-side infrastructure

• Experience in delivering superior customer service experience

SKILLS

• Ability to make sound decisions following approved procedures in a fast-paced environment

• Ability to effectively manage multiple tasks occurring simultaneously

• Ability to work independently with little supervision

Working Hours Coverage

COVERAGE HOURS

· Monday to Friday

· 9:00 – 18:00

· 8 working hour per shift defined by team manager within coverage hour above

· Extreme weather WFH/remote coverage

PAID OVERTIME WORK

· Required occasional non-office hours (weeknight, weekend & Holiday) paid overtime work on team rotation basis

With a global remit, our Technical Program Management professionals lead cross-functional product design teams to develop and introduce game-changing new products and solutions. It’s about making sure we offer customers the right features, experience, quality, schedule, cost, continuity of supply, service capability and financials. And when products and solutions are in development, it’s about driving everything from definition through to planning, development and launch across global development centers and multiple lines of business. The team is also crucial to getting shipping right. All in all, it is a fascinating and incredibly varied area.

Join us as a Technical Program Manager on our Displays & Client Peripherals Program Management team in Singapore to do the best work of your career and make a profound social impact.

What you’ll achieve
As a Technical Program Manager, you will drive the development and implementation of new and exciting product solutions within the extensive range of Displays and Client Peripherals products. Working closely with cross-functional team members, you will manage the entire lifecycle of the assigned product line that is critical to providing great user experience on our Client Peripherals products . From design to delivery.

You will:

• Manage end-to-end cross-functional, worldwide core team(s) for the Client Peripherals Line of Business (LOB), kicks off programs, establishes schedules and drives meetings. Cross Functional Team members can include Services, Engineering, Quality, Product Operations, Marketing, Procurement, Global Operations, Finance, etc.

• Lead the core team to meet or exceed program objectives (Cost, Quality, Schedule, Features, Fulfillment/Continuity of Supply, Solution delivery across products & service offerings, and Customer Specific Needs); Establish clear objectives and deliverables on programs that support the business strategy for the LOB; Proactively respond to risks and challenges through effective contingency planning and appropriate escalations; Track progress, reports status and drives necessary changes to achieve program objectives; Establish strong working relationships and influences/persuades at the Manager, Director, General Manager, Vice President, and Senior Vice President levels.

• Communicate clearly, accurately and concisely with required depth, and facilitate effective decision making at core team to leadership business review forums

• Prepare core product design team and extended teams for internal and external ISO Audits to maintain ISO Corporate Compliance.

• Participate in non-product or solution cross-LOB initiatives, examples include Process Improvement projects, Digitalization Tools implementation and Resource sizing/planning.

Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:

Essential Requirements
• 10–15 years of related experience in product development processes, product/solution areas or business consulting
• Strong track record in managing cross functional teams to clearly define the product/solution objectives, deliverables, opportunities, challenges and the required actions to achieve the defined objectives, at regional and global levels
• Capability to clearly communicate both technical and business matters, and influence decision makers

Desirable Requirements
• Bachelor’s degree

Who we are

We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.

Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.

Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.

JOB PURPOSE:

Business Intelligence Analyst generate and analyze reports backed by statistical and financial principles to support the management team in formulating their business strategies. The person is also responsible to provide user support for CRM (Customer Relationship Management System) and Marketing Associates Applications.

PRINCIPAL ACCOUNTABILITIES:

• Develop and generate management reports.
• Automation of mainline reports and document work procedures.
• Maintain database to ensure data accuracy and information integrity.
• Handle statistics and finance related enquiries from various departments.
• Provide user support for CRM & Marketing Associates systems, enforcing best practices and improving user productivity.
• Develop and maintain documentation for systems configuration, application workflow and business rules.
• Work with IT development resources to enhance applications and troubleshoot.
• Work with User Services team on application administering, such as creation & maintenance of workgroups, maintenance of existing users, creation of new users, creation of users synchronization rules and region / branch realignment.
• Support & maintain Marketing SOP and periodical ISO auditing.

JOB CONTENT:

• Develop, Maintain & Modify Reports to suit changing business needs

RECOMMENDED CREDENTIALS:

QUALIFICATIONS

• Degree in IT / Computer Studies / Business Analytics / Applied Economics and Finance or Equivalent.

EXPERIENCES

• Experience in data manipulation and analysis is essential. Ability to automate reports is preferred.
• Exposure working with senior management.

COMPETENCIES

• Knowledge in MS applications specifically Power BI, Power point, word, excel, access.Proficient in programming - VBA, SQL, DAX.
• Ability to develop and troubleshoot macro programming (VB Application).
• Good interpersonal and communication skills, and service-oriented with a high-level of initiative and drive.

Job Description

You will be a member of the Group Information Security Team responsible for ensuring that IT solutions are developed and designed with security inbuilt.

Key Responsibilities

• Provide security consultancy, technical guidance, expertise, solutions, and education for the enterprise.

• Advise IT application and infrastructure teams on application and infrastructure security design that is relevant and fit for purpose.

• Align security architecture frameworks and standards with business strategies and functions. Maintain Cyber risk management framework and perform assessment of applications for emerging areas like cloud security, machine learning etc.

• Advise and review application security design to detect potential security issues and for each issue, propose and drive remediation tasks. Develop application security blueprints. Propose and/or develop training courses to advance developers’ security knowledge.

• Advise and review security by design concepts in Cloud platforms such as GCP, AWS or Azure Cloud.

• Advise and review the compliance of integrating security tools and processes into the DevOps pipelines.

• Advice and review the adherence to security requirements for low code platforms.

• Perform threat modeling on security-critical applications. Keep up to date on emerging security threats and vulnerabilities on new platforms adopted by the SIA Group. Define scope and review the results of security tests, reviews, and audits to ensure security assurance is achieved.

• Manage individual project priorities, deadlines, and deliverables. Any relevant ad-hoc duties.

• Review RFP proposal compliance with security requirements.

• This is an individual contributor role. Strong communication skills are required.

• Note: You could be posted to any subsidiary in the SIA Group.

Requirements

• Degree in IT or related fields, with at least 7 years in information security, especially in the application security space.

• Professional security certifications (CISSP, CSSLP, CEH, CCSP, etc.) preferred.

• Technical proficiency in one or more of the following security areas: network design, zero trust, Internet of Things, cryptography, etc.

• Strong in-depth working knowledge of secure application development techniques. Secure by Design. Secure source code review. Prior experience with any of the following tools: Static Application Security Testing (SAST), Dynamic Application Security (DAST), and Software Composition Analysis (SCA).

• Strong understanding of Agile, DevSecOps, OWASP Top 10, and securing cloud platforms, such as AWS and GCP. Familiar with common web/mobile application vulnerabilities and technical knowledge to address and mitigate vulnerabilities.

• Knowledge of cyber security threats, vulnerabilities, hacking, and exploit methods, etc. Any prior vulnerability management experience is preferred.

• Strong understanding of technologies such as WAF, Anti Bot Protection

• Prior experience in application development and knowledge of the DevOps platform is desired.

• Strong oral, written, presentation and interpersonal skills.

• Possess a positive attitude with drive, initiative, enthusiasm, and a keen sense of urgency in resolving high-priority issues.

• Able to work independently and in a team-oriented, collaborative environment.

It’s hard to put a price on driving human progress, but when you’re operating in a competitive business environment, you need innovative pricing strategies. Our Pricing team within Sales Operations is responsible for developing, implementing and evaluating these strategies.

Join us as a Data Server Pricing Analyst on our Sales Operations team in Singapore to do the best work of your career and make a profound social impact.

What you’ll achieve

As a Data Scientist supporting the pricing team, you will work closely with our team of pricing analysts and data scientists to collect, analyze, and interpret data to help us develop and implement pricing strategies that maximize revenue and profitability. You will also have the opportunity to develop your data science skills and work on real-world projects that have a direct impact on our company's bottom line.

Responsibilities

• Assist with the collection, cleaning, and preparation of data
• Conduct data analysis and identify trends and patterns
• Build and evaluate predictive models
• Develop and implement data visualization tools
• Communicate findings to stakeholders in a clear and concise manner

Essential Requirements

• Strong programming skills in Python, R, or another data science language
• Experience with data analysis and machine learning techniques
• Excellent communication and interpersonal skills
• Exhibits strong collaboration within team / work group
• Ability to prioritize and execute in a timely manner

Desirable Requirements

• Experience in Power BI
• Bachelor’s degree in Data Science, Machine Learning, Statistics, Economics, Physics, other quantitative fields.

Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.