Total 63,871 Full-time technical engineer job vacancies in Singapore

Job Responsibilities:

1. Circuit and system design of RF/analog transceiver IC based on CMOS technology

2. Schematic design, behavioral and circuit-level simulation, circuit implementation, layout design and test

Job Requirements:

1. A master's degree or above in microelectronics, communications, electronic engineering and other related majors; more than 3 years of relevant experience

2. Good know-how on RF/analog circuit theory and analysis; Good understanding of design process of RF/analog IC

3. Solid experience in the following module/block design and test: VCO, PLL, LNA, PA, MIXER, PMU, ADC, DAC, etc.

4. Good communication skills and team spirit.

5. Fresh MS graduates are welcome.

Responsibilities

• Manages & leads a team of engineer assistants, supervisor and technicians on the testing of low-voltage switchboards and power distribution boards.
• Ensures that all testing checklists are correctly checked and signed.
• Drafts training material, manages and provides training (safety guidelines, testing and troubleshooting techniques) for newly hired employees or on new products.
• Leads the team and conducts factory acceptance tests (FAT) / factory witness tests (FWT) with the presence of clients in accordance to the method of statement (MOS).
• Performs in-house test procedures in accordance with the MOS.
• Performs in-house quality control procedures and checklists (e.g., visual inspection, torque tests, etc).
• Manages (calibration, defect reports, replacement procedures) all relevant tools and equipment used by the Testing Department.
• Assists in providing insights to the Quality Management Team for CAPA and RCA whenever required.
• Assists in providing insights to the Project Management Team for discussions and validation of the method of statement whenever required.
• Be committed to the team in achieving various goals set by the Managements

Requirements

• Diploma and/or above in Electrical Engineering, Electrical & Electronic Engineering or Mechatronic Engineering.
• Well versed in Microsoft Office tools (Outlook, Teams, Word, Excel, etc.).
• Possesses the ability to interpret electrical schematic, single line diagram (SLD).
• Preferably to be experienced in handling tools and equipment used in electrical testing (E.g., Primary Current Injection Test Set, Secondary Current Injection Test Set, Digital Micro-Ohm Meter, Insulation Resistance Test Set, Dielectric Withstand Test Set).
• Minimum 1 year of related work experience* in the field of Electrical Engineering.

• Develop and implement software for automated equipment operating at high speeds.
• Carry out software design, coding, testing, debugging, and validation.
• Assess and define system performance and specifications.
• Perform software maintenance on existing equipment.

Requirements:

• Degree in Engineering or equivalent.
• At least 3 years of software development experience in the automation/semiconductor industry.
• Hands-on experience in programming multi-threaded windows application using Visual C++.
• Good understanding of electronic components, motion control and interfacing with inspection systems.
• Willing to travel overseas for field support when required.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website atwww.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description:

• Ensure chiller systems operate at optimal performance and efficiency.
• Provide exceptional service by addressing client inquiries and concerns about chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues, implementing effective solutions.
• Educate clients on proper operation and maintenance practices to enhance the lifespan of their chiller systems.
• Prepare detailed reports outlining service activities, findings, and recommendations for improvements.
• Execute commissioning processes for new chiller installations, ensuring proper setup and functionality.
• Work with agents, customers, and contractors to verify system performance and compliance with specifications.
• Foster collaborative relationships with contractors to encourage teamwork and shared problem-solving.
• Adhere to safety protocols and regulations, conducting safety briefings to ensure understanding of responsibilities.
• Perform field-based tasks in various environmental conditions, including outdoor settings.
• Be available for chiller breakdown calls during assigned standby shifts.

Job Requirement:

• Diploma and Degree
• 3-5 years of proven experience in chiller maintenance, commissioning, or related HVAC roles.
• Strong technical knowledge of chiller systems, HVAC principles, and electrical controls.
• Excellent problem-solving skills with a keen attention to detail.
• Strong communication and interpersonal skills for effective interaction with clients and team members.
  Ability to work independently and manage time efficiently.
• Completion of Building Construction Supervisors Safety Courses or equivalent certifications.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Vivian Chung Fhui Tiin
EA Personnel Reg No: R22106436

Responsibilities:

• Provide support for customer applications (on-premises and Cloud / SaaS based) directly and via triage to 3rd party support vendors where appropriate.
• Provide support for customer reporting solutions created using SQL, Crystal Reports, Excel and Power BI
• Write functional and technical documentation for applications and reporting solutions.
• Engage in Database Administration/Maintenance tasks on SQL Server and Azure SQL
• Respond to business user requests for change in application functional capabilities and engage with technical leadership on business demand for feature development.
• Participate in Projects involving application or data components as a SME.
• Provide high-quality support for the business-critical application(s) or data system.
• Develop and maintain an in-depth detailed knowledge of the applications you manage, including data structures, scheduled jobs, reports, and interfaces to other applications.
• Maintain know-how documentation of all the support tasks with resolution.
• Develop programmes and processes for internally developed IT systems to deliver efficient business processes.

Requirements:

• Experience in supporting and developing solutions for the Office 365 Platform including SharePoint Online, Power Automate (Flow), Power Apps, Forms Bookings etc. Operational support experience of SQL servers and knowledge of SQL Query.
• Experience supporting SaaS applications and web-based services. (websites, web applications)
• Demonstrate a good understanding of data / information architecture, Microsoft data lake, data pipelines and API integration.
• Application Knowledge of the following systems would be beneficial (Zendesk, Freshworks products (Freshdesk, Freshchat, Freshmarketer), Momentus EBMS Event Booking Management System, Online Bookings System, POS - TigerNix)
• Experience with PowerShell or other scripting code proficiency( vbscript / python)

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quotation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• Draft and compile technical documentation, such as datasheets, proposal designs, clarification notes, and responses to tender specifications.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience.
• Proficient in Microsoft Office and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for a Manufacturing and Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Offer continuous technical support to contract manufacturers, resolving electronic engineering issues encountered during production.
• Work closely with manufacturers to establish and uphold rigorous quality control standards, ensuring reliable and consistent product performance.
• Analyze manufacturing workflows to identify and implement process improvements that boost efficiency and productivity.
• Address and resolve electronic engineering challenges to prevent production delays and minimize defects.
• Collaborate with design and development teams to implement design enhancements that improve product quality and streamline manufacturability.
• Coordinate investment audits with cross-functional teams, conduct regular physical asset inspections, and assist with annual inventory checks as needed.
• Any ad-hoc duty as given

Requirement

• Min Bachelor's degree in Electronic Engineer or a related field
• Min 4 years in EMS - Electronic device assembly
• Good understanding in overall supply chain, manufacturing technology, process set-up, process validation and SOP support
• Knowledge and experience in manufacturing, planning, quality, SAP, PLM
• Knowledge and experience in wearable electrical device's assembling
• Comfortable to travel overseas often

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Software Engineer (Front End)

About the Job:

We are seeking a passionate and innovative software engineer to join our team in Electrical & Industrial Solutions Group Center of Excellence (EISG COE) to launch the next generation software solution for future enterprise engagements. As a software expert engineer, you will be the critical contributor of solution framework knowledge in developing and integrating multiple software products to create solutions. You must be a proven expert with experience designing, implementing, and deploying end-to-end solutions.

About the Team:

You will work closely with strategic planners, product management, and customers to understand key challenges and create solutions that advance this position as a market leader in measurement test.

Responsibilities:

· Lead architectural design and system level integration, interfaces, and test requirements for our client’s board test and measurement software.

· Work to outline end-solution and develop work breakdowns by shippable epics, milestones and ultimately work with leads on sprint deliverables.

· Set the technology direction for major components and services; work hands-on to integrate them into our measurement test software.

· Partner with internal and external stakeholders to understand requirements and translate them for the development teams.

· Work closely with various software teams in the development of the common building blocks

· Effectively communicate and interact up and down across the cross-functional teams and organizations.

Basic Qualifications:

· Bachelor/Master Computer Science/Electrical/Electronic Engineering or a software related discipline, from an accredited college or university

· Minimum 4+ years’ experience working with product design/development/engineering and product management.

· Proven track record to do what it takes to deliver our products to customers on schedule.

· Excellent written and verbal communication skills are a must.

· Knowledge with basic electronics principles, board testing technology, IEEE boundary scan standards and programming algorithms is an added plus.

· Experience in design, implementation and deployment of software that support multiple platforms (Windows, Linux and MacOS)

· Well-versed in modern techniques in object-oriented design, MVVM architectural pattern, design patterns and measurement libraries

· Expert working knowledge of application development using C#, WPF, .NET or Java GUI

· Familiar with front-end usability and user experience applications development

· Knowledge in RestAPI, gRPC, microservice technology and containerization

· Solid understanding of Jenkins CI/CD development flows and tools such as Microsoft Visual Studio, TFS, SharePoint, Git, Bitbucket, JIRA, Confluence or equivalent for cross platforms

· Experience in reengineering and migrating legacy software solutions to modern technology platform is an added plus.

As a Steel Structure Engineer specializing in steel structures, you will be responsible for planning, designing, and overseeing the construction and integrity of steel-based structural components and frameworks. This role involves ensuring structural safety, compliance with codes and regulations, and independent delivery of engineering solutions from inception to completion.

Key Responsibilities:

1. Design and Analysis: Conduct structural design calculations for steel components, connections, and frameworks, ensuring compliance with relevant codes (e.g., AISC, Eurocode, or BS standards).
   Analyze load-bearing requirements, seismic impact, and material properties to create safe, efficient designs.
   Create detailed drawings, specifications, and technical documentation.
   
2. Project Management: Manage steel structure projects from initial design to final implementation, including budgeting, scheduling, and coordinating with other teams.
   Perform risk assessments, implement quality control procedures, and ensure compliance with safety and environmental standards.
   Monitor project progress, making adjustments as necessary to stay on track with timelines and budgets.
   
3. Collaboration and Coordination:Work closely with architects, civil engineers, project managers, and construction teams to integrate structural requirements into overall project design.
   Coordinate with suppliers and contractors to ensure timely and accurate delivery of materials and execution of installation.
   Provide technical guidance and oversight to junior engineers and drafters.
   
4. Quality Assurance and Compliance: Conduct on-site inspections, quality checks, and structural assessments to ensure compliance with design specifications.
   Ensure that all steel structures meet safety and regulatory requirements, adapting designs as needed for unforeseen challenges.
   
5. Reporting and Documentation: Prepare project reports, cost estimates, and technical summaries for stakeholders.
   Maintain organized records of project documentation, calculations, and revisions.
   

Requirements:

1. Education and Experience:Bachelor’s degree in Civil Engineering, Structural Engineering, or related field. At least 2 years of experience in steel structure engineering, with a strong portfolio of completed projects.
   
2. Technical Skills: Proficiency in structural analysis software (e.g., STAAD Pro, ETABS, SAP2000) and CAD tools (e.g., AutoCAD, Tekla, Revit).
   Solid understanding of steel design standards, load calculations, material properties, and connection detailing.
   
3. Project Management Skills:Strong project management abilities, including budgeting, scheduling, and resource allocation.
   Ability to independently lead a project from start to finish, making critical decisions as necessary.
   
4. Soft Skills:Excellent communication and interpersonal skills to collaborate effectively with multidisciplinary teams. Detail-oriented with a strong commitment to accuracy and quality. Problem-solving skills to address design and site challenges effectively.
   

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Engineer, Design in Singapore. The position will be based in our Univac Site in Woodlands.

As an Engineer, Design, you will:

Responsible for product analyzing, design for manufacturing (DFM), tool design 3D and 2D drafting, tool review and debugging.

The key responsibilities are as below:

• Construct mold design layout and conduct mold design review meeting.
• Design precision plastic injection molds in accordance with the requirements.
• Mold management and liaise closely with internal and external customers on matters relating to mold design.
• Preparation of detail bill of material and maintain thorough documentation of hardcopy and softcopy.
• Participate in the First-Off Tool review and assess the suitability of the tool for production.
• Performs other duties as assigned.

What skills and experiences are we looking for?

• Possesses at least a Diploma in Mechanical, Manufacturing, Precision Engineering, and/or any equivalent engineering discipline.
• 2 years of working experience in tool design, and/or any relevant experience.
• Experience in making LSR mold design, as well as packaging mold design is an advantage.
• Proficient in AutoCAD, Unigraphics and Microsoft Office Applications.
• Familiar with engineering drawings and GD&T.
• Ability to develop complex designs to the point of manufacture and release to production.
• Knowledge of plastics & elastomers.
• Team player with a good verbal and written skills.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: [email protected]

For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail, and supply chain.

We are currently looking to hire Software Engineer (Node JS)

This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Job Type: One-year Renewable Contract

Job Description:

Key Responsibilities

• Analyse the solution, prioritize, develop strategy, identify target solution and derive actions list to meet personal and company objectives.

• Develop and communicate the detailed technology architecture and implementation strategy for a solution to the project team.

• Participate in technical engagement through the design and development of complex transactional systems.

• Participate in large-scale system integration, providing both oversight and hands on contributions to the software design, development, and integration.

• Resolve integration and interfacing issues between various back-end systems. Optimise application performance, scalability and security.

Requirement & Qualifications

• Minimum of bachelor’s degree or equivalent.

• 3+ years of experience in API/backend development and integration using NodeJS

• 3+ years of enterprise computing experience, including 1-2 years of application and technical architecture experience

• Practitioner in agile development, secure pipelines and deployment automation

• Minimum 2 years of experience in AWS/Azure/Google cloud implementation

• Good experience with DevOps, CI/CD tools such as Git, GitHub, Jira, Jenkins, or equivalents

• Appreciate or willing to learn large-scaled distributed systems and their challenges

• Familiar with code security and opensource tools in relevant domain

• Passion for automation for large scalable systems ensuring they are highly secured, resilient and highly available

• Strong contributor and hands-on in all your past experiences

• Fast learner, achiever, sets high personal goals.

Desirable Certifications

• AWS Certified Solution Architect

• Any other equivalent industry standard architect certification

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Preethi Kanthappan

Reg No: R1765546

Avensys Consulting Pte Ltd
EA Licence 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' privacy policy.

• Remote Support
• Counter Services/Walk in
• Mass Onboarding/New Hire Setup
• UAM Account Pre-Provision
• Pre-Setup Autopilot & Follow up non-Compliance issues
• Reimage laptops
• Setup MacBook, Laptop, Printers, Kiosk machines, etc
• Setup iPads or phone.
• At least 1 year IT Support experience
• IT Support

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 8 years’ experience

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Responsibilities:

• Equipment and Utilities qualification, facility qualification, controlled temperature chamber qualification with temperature mapping.
• Develop, review and/or approve validation lifecycle documents and protocols/reports and deliverables in accordance with relevant policies, standards, procedures and guidelines, and completed in a timely fashion.
• Take lead and review project design documents (P&IDs, PFDs, URS etc.)
• Define user requirements and create SOPs or documentation related to the validation activities
• Manage qualification execution and lead validation deviation investigation encountered in qualification.
• Create and review validation lifecycle documents: User Requirement Specification, Functional Specification, Risk Assessments, Validation Protocols (IQ/OQ/PQ/CPV) and Reports, Study Protocols and Reports, Requirement Traceability Matrix, CFR Part 11 assessment and validation submission dossier
• Collaborate with multi functions to arrange, plan and ensure smooth running of the qualification activities
• Participate in site Validation Maintenance Program.
• Write execution related deviations and change requests
• Support change implementation on site.
• Manage Change Control to update SOPs, Risk Assessment, Requirement Traceability Matrix and/or Automation System Life cycle documentation as needed
• Perform validation documentation and/ or support validation documentation in accordance to the division procedures
• Regular preview of pending activities to maintain validation status with validation lead, supervisor or manager
• Ensure validation execution meets compliance, validation standards and cGMP requirements
• Any other task as assigned by Supervisor/Manager

About You:

• Diploma/Degree in Engineering or Science Disciplines with 3 to 5 years experience in Pharmaceutical Industry
• Proven track record in Equipment Qualification for HVAC and Utilities Validation (IQ/OQ/PQ/CPV)
• In-depth knowledge on cGMP, GDP and ASTM E2500
• Proactive and self-motivated
• Demonstrated proficiency of written and verbal communication skills in English (including technical writing and presentations)
• Effective Project Management, leadership, communication and interpersonal skills

Job Type: Contract

Contract length: 9 months

Job Description

• Able to read design drawings and operate generator control panel and switchgear.
• Able to plan and arrange commissioning work at site.
• Design customized power generator control circuits with PLC programming, networking, HMI and switchgear layout.
• Work closely with Service Engineers to handle factory test in workshop and commissioning at customer's site.
• Provide assistance to Sales Engineers in technical specification and attending technical meetings at customer's site.
• Able to support and troubleshoot control issues through phone and email, remotely.
• Able to coordinate with Site Engineers and Superintendents on site commissioning.
• To handle factory internal testing in workshop.
• To handle Factory Acceptance Test in workshop in the presence of customer.
• Provide technical assistance to Sales Engineers.
• Coordinate with customer for technical issues to meet customer's technical requirements.
• Able to support and troubleshoot programming issues throught remote internet/computer device.
• Monitor projects through completion, providing corrections, modifications or assistance to other department as needed.

Qualifications & Requirements

• Degree in Electrical or Engineering equivalent.
• Minimum 5 years of design experience in either power generation controls and/or electrical switchgear or automation control.
• Proven experience with low-voltage and medium-voltage switchgear design, control panel development, and power system studies.
• Proficiency in AutoCAD, E3, or other CAD tools.
• Demonstrate above-average electrical engineering skills, preferably within the power generation industry or closely related field.
• Ability to manage multiple projects simultaneously, meet deadlines, and coordinate across teams.
• Generator control knowledge is a plus.
• Strong written and verbal communication skills for creating documentation and liaising with cross-functional teams and clients.
• Excellent analytical and troubleshooting abilities to resolve complex electrical design challenges.
• Experience in PLC and HMI (touchscreen and/or IPC) programming.
• Knowledge in network communication and SCADA is a plus.
• Ability to read and interpret electrical schematics, plans, drawings, prints or similar job write-up.
• Willing to travel overseas as frequent global site visits is expected.

JOB SCOPE:

• Generate leads and identify sales opportunities
• Present product demos and technical solutions to customers
• Prepare proposals, quotes, and pricing
• Collaborate with engineering teams to design tailored solutions
• Assist with product installation and integration
• Provide post-sales support and customer training
• Manage sales pipeline and track progress
• Build and maintain customer relationships
• Negotiate pricing and close deals
• Stay current with product knowledge and industry trends

REQUIREMENTS:

• At least 3 years of experience in manufacturing automation machines
• Knowledge of CAD software and Microsoft Office
• Diploma (or higher) in any discipline; related experience may apply
• Self-motivated, goal-oriented, creative, and able to multitask
• Able to collaborate effectively with others
• Frequent travel may be required
• Class 3 driving license preferred
• Willingness to adapt and be flexible
• Preferably own vehicle (car allowance provided)

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

- Assess Die Overkilling In Line and Optimization of criteria

• Define Sampling Criteria for Yield Enhancement (YE) Wafer – Initial is to align with RPM lot
• Define and Create YE In Line DL2 & MRDA Flow: Full scan with tighter criteria (higher magnification) with non-die-kill
• Create Deviation flow to Route to YE Flow
• Define and Create YE Probe Flow: Full data logging and Test-to-end to capture as much data as possible
• Data Analysis:
• Correlation of MRDA (Metro Real-time defect analysis) Defect to Probe to identify in line failure mode causing probe fail and failure analysis

- Manage Risk of deviation

- Provide organizational leadership to build functional strategies & processes, and collaborate with partners to deliver strategic solutions

• Establish organizational roadmaps and strategies. Apply extensive knowledge and tenacity to carry out strategies.
• Collaborate with peers to construct global solutions.
• Ensure conflict resolution and assist with identifying escalation paths.
• Align internal strategies and communicate line of sight to corporate strategic objectives.
• Establish and communicate department capabilities to ensure partner expectations are aligned.
• Manage conflict and build effective relationships with internal and external partners.
• Initiate and sustain effective communication with internal and external partners.
• Provide advice to senior and executive management on strategic decisions
• Establishes and manages budget/finances for the team

- Ensure a Safe, Compliant, and Ethical Work Environment

• Maintain knowledge of and apply company safety, labor, and ethics policies.
• Communicate requirements and expectations to leaders and external partners.
• Ensure execution of mandatory training for organization.
• Identify and resolve and / or report potential safety, security, and labor issues.

Requirements

• Bachelors, Masters or PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• At least 4 years of experience in Semiconductor Manufacturing and on a leadership capacity, with focus on Advance Packaging technologies and High Bandwidth Memory (HBM) integration, in yield enhancement
• Experience in PWF (Post Wafer Fabrication), Backend engineering process, assembly package technology development and technical knowledge with die and wafer level process technology with understanding of Micron’s silicon and how it interacts at a package level through CPI (Chip Package Interaction), in yield enhancement
• Strong leadership and vision and must be able to comfortably work across organizational boundaries and geographies.
• Demonstrated ability to influence executives, senior leaders and partners on strategic decisions across multiple functions and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Ability to be guided by business objectives and determine best methods for delivering results.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Proven facilitation skills including the ability to influence others, build consensus, and resolve conflict.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill

Keen on the role? Apply now!

Job Scope:

• Project planning, coordination, and execution.

• Design and integration of automation systems according to project requirements.

• Graphical design of the electrical network.

• Plan installation schedule with client and installer

• Testing and commissioning of systems.

• Preparation of project documents and drawings.

• Manage a group of Application Engineers in the functional aspect.

Requirement:

The candidate is preferable with at least a Degree in the Engineering field (Electrical or Power & Automation, experienced candidates are welcome.)

• Experience/knowledge in SCADA, PLC & HMI in Power System Control or Environmental Control Systems is an added advantage.

• Knowledge of data communication and automation systems for electrical networks.

• Knowledge and experience in IT networking as well as server/VM setup.

• Knowledge in Power Quality area is a plus

• Knowledge in HVAC system is a plus

• Required skill(s): Microsoft Office, Savvy in various computer skills such as computer networking, setting up new PC/VMs, and knowledge of electrical systems.

• Mature and able to handle tasks independently, result-oriented, and self-driven team player with good communication skills.

• Good personality, responsible, hardworking person.

• Fast learner and good soft skills.

• Ability to work as a team, lead and supervise the contractors.

• minimum 5 years of experience.

• Experience in team management in functional aspects.

• Process excellent team spirit and good leadership.

Additional remark:-

- Candidate with more years of technical and/or team management experience will be considered for Team Lead or Manager position/package.

Job Description:

• Research, design, and develop computer and network software or specialised utility programs.
• Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.
• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.
• Work with computer hardware engineers to integrate hardware and software systems and develop specifications and performance requirements.
• Collaborate with the team to create technical designs for frontend architectures using React and React Native.
• Develop and maintain frontend components and features for our main products.
• Participate in the development of management platforms related to marketing activities.
• Optimize frontend performance and implement server-side rendering techniques.
• Contribute to the improvement of development processes and coding standards.
• Stay up to date with the latest frontend technologies and best practices.\

Requirements:

• Bachelor's in Computer Science, Engineering or a related field
• Minimum 5 years of experience in Frontend Engineering.
• Experience in React or React Native.
• Experience with frontend performance optimization and server-side rendering.
• Familiarity with build tools like Webpack and Vite.
• Knowledge of Node.js and CSS.
• Excellent problem-solving and debugging skills.
• Strong attention to detail and ability to deliver high-quality code.
• Good communication and collaboration skills.
• Passion for staying up to date with the latest frontend technologies and trends.

Roles & Responsibilities

Site Engineer (Plumbing & Sanitary)

Working Day: Mon-Sat - 6 Days - 9am to 6pm

Basic Salary: $3,000-$4,500

Job Requirements

1. Supervise Plumbing & Sanitary installation works.
2. Discuss with Main Contractors, Sub-Contractors & Suppliers and Consultant if necessary.
3. Documentation of method statement and work procedures.
4. To develop, monitor, and review site construction activities to ensure work completion as scheduled.
5. Manpower arrangement and supervise/manage site arrangement.

Other Requirements

• Min 3 years experience in similar experience and managing a few sites.
• Excellent communication and presentation skills.
• Knowledge in project management.
• With BCA BCPPF qualifications is an advantage.
• Knowledge of Plumbing/Sanitary and Gas as an Advantage.

Sales Engineer for the sales of NOV Wireline and Slickline Equipment in the Oil & Gas Industry.

This position is based out of our Loyang Office.

Job Description:

1. To support the growth of the business by providing technical sales support for customers and the regional sales force, including pre and post client interaction throughout the sales process.
2. To support the Regional Sales Manager/Sales Manager in developing and achieving sales plan and maximize sales success.
3. To mentor and guide the peers in technical sales supports, and general sales skills.
4. Develop high level customer relationships for mutual benefit.
5. Maintain and report monthly forecasts on sales orders-in and backlog.
6. Manage collections, report on AR, and act as the escalation point for chasing significantly aging debt.
7. Participate in sales and operational planning activities to ensure market winning lead times and maximize product availability.
8. Ensure compliance with QMS policy and process to ensure the sales process can be audited and remains compliant.
9. Preparation of quotations and supportive information to customer enquiries.
10. Contract review and processing of orders with supportive information and relevant parties.
11. Management of product pricing evaluation.
12. Assist with pricing of products and regional variation to maximize sales potential.
13. Maintain an overview of clients in the region, their contracts and operations.
14. Maintain an overview of competitors, their activities, success and failures, feedback to management.
15. Management of all existing agents on a regional basis.
16. Monthly report to the Management, including quote activity, new orders, new clients, customer feedback and business outlook.
17. Ready for regional travels, including clients visit, seminars etc. (approximately 50%)
18. Other reasonable tasks as directed by your line manager.

Job Requirements:

1. Min Diploma in Engineering or equivalent field.
2. Min 3-5 years experience in similar function and industry.
3. Excellent analytical, written, verbal communications, and documentation skills.
4. Ability to maintain focus and business acumen under sometimes stressful sales/business negotiations.
5. A strong sense of customer focus (internal/external).
6. A candid team player who collaborates with peers to solve problems.
7. Firm and diplomatic when negotiating.
8. Committed to self-improvement and development through the role to achieve career goals.

As a Package Design Engineer within the Package Development and Engineering (PDE) organization in Micron Technology, you will provide package definition and designs for advanced semiconductor devices. You will be working with a multi-functional team across several geographies to create package design databases such as package stack-up, simulation, route-study, substrate/lead frame layout, wire bond diagrams, and other design documentation. You will be ensure the completion of design activities within the project schedule and ensure that design outputs are within Assembly and vendor capability.

Responsibilities will include, but are not limited to:

• Conduct feasibility studies for various package options and assess designs for manufacturability and reliability.
• Work closely with multi-functional team to address packaging design challenge in the area of layout, electrical, thermal, mechanical, assembly and reliability.
• Interact with PDE assembly team and external assembly subcontractor partners to recommend package solutions to meet customer and/or market requirements
• Generate and update assembly documents in database. Provide drafting and drawing support for package drawings, interposer drawings, and manufacturing drawings.
• Support package and DFMEA reviews with assembly engineering and subcon teams.
• Support package technology development, including material selection, process development, DOEs, and related activities
• Support package technology development, including material selection, process development, DOEs (Design of Experiments), and related activities.
• Track and drive program milestones to ensure timely development execution.
• Provide design support for thermal/mechanical/electrical simulation analysis.
• Support and contribute to the Global Design, Simulation and Substrate (GDSS) team on continuous improvement efforts such as:Global design alignment activities
  Continuous improvement efforts
  Package design rules
  Package roadmaps
  Competitive Analysis review

Requirements:

• Master (preferred) or Bachelor of Science degree in Electrical Engineering or Mechanical Engineering with a minimum of 5 years of experience in semiconductor packaging industry OR PhD graduates in Electrical Engineering
• Candidates must possess a strong design knowledge of high-density (Wirebond + Flip-Chip) packaging architectures, die stack-up, packaging layout optimization.
• Excellent communication skills, both oral and written in English.
• Excellent problem solving and analytic skills.
• Experience with Cadence SIP, APD and AutoCAD software tools is preferred.
• Good understanding of Silicon IP, floorplan and Signal/Power Integrity is a plus.
• Ability to work independently, prioritize and manage numerous projects with minimum supervision.
• A global perspective and the ability to work in a multicultural environment.

Performs semiconductor design engineering assignments including engineering and designing packaging stack-up, layout checking, documenting specifications, modifying and evaluating packaging risk in the areas of electrical, thermal, mechanical and reliability. Reviews package design requirements, define the package stack-up and conduct final design review. Typically responsible for projects, or portions of projects, to design, fabricate, modify, and evaluate semiconductor Packaging.

Roles and Responsibilities:

• Having Banking domain knowledge on consumer banking, mobile banking, Internet banking etc.
• Responsible to work on both waterfall and Agile methodologies
  Involved in collecting performance test requirements across different application technologies.
• Involved in writing performance test plans by incorporating performance testing objectives, testing environment, user profiles, risks, test scenarios, explanation about the tools used, schedules and analysis, monitors and presentation of results.
• Responsible for developing and modifying performance test scripts (protocols such as Web (http/html), web services, MQ, GUI, Java user) using Load Runner good to have Microfocus Performance Centre (PC) or tools like JMeter.
• Should be able to customize and enhance test scripts as per workload requirements.
  Responsible for Pega application Performance Testing
  Responsible for execution using Load Runner also good to have Microfocus Performance Centre (PC)
• Responsible to integrate Load Runner into CI/CD Pipeline (using Jenkins) for applications following Agile methodologies
  Responsible for application performance monitoring either using industry wide APM tools such as Nimsoft, Appdynamics, Wily or OS commands such as perfmon, Nmon, vmstat etc.
• Responsible to perform thorough analysis of performance test results to report the server response times, throughput, Hits/sec, Trans/sec Transaction Response under load, Web Server Monitors, App server monitors, system monitors such as java processes, Oracle DB connections monitoring and other Performance metrics.
• Worked with App-Dev, Production, Technical and Business Managers in planning, scheduling, developing, and executing performance tests.
  
  Requirements:
• At least 4-6 years of experience in Performance Testing in banking domain.
• Must have hands-on experience on end-to-end performance testing lifecycle
• Must have hands-on experience working with Agile/DevOps model and integrate &automate performance testing in CI/CD model
• Must have hands-on experience on performance testing tools such as MF Performance Centre and JMeter. Certification on these tools is a plus.
• Must have hands-on experience on APM tools such as Nimsoft, AppDynamics, Splunk or Operating system commands such as perfmon and Nmon
• Must have hands-on experience on formulating and executing Mobile on-device performance testing & engineering
• Good knowledge of Agile processes, performance testing methodology and different types of testing.
• Excellent communication (spoken and written) skills and able to work independently.