Total 142 Junior Executive technical support engineer job vacancies in D18 Tampines, Pasir Ris

DUTIES & RESPONSIBILITIES

• Provide Technical Support in the ongoing management of technical integrity of the operational assets.
• To provide documentation review.
• To provide document summarisation.
• Generate reports, presentations, spreadsheets, workflows, etc.
• Development, documentation, and supporting the Integrity Management program for the assets/ fleet consistent with Company Standards.
• Assist operations team to optimize plans/ budget/ costs.
• Assist in achieving related KPIs.
• Work within a team of technical support staff and contractors within approved budget limits.
• Review Facility Daily/ Monthly reports/ Incident or Loss reports to identify potential integrity issues.
• Assist in providing support on a daily basis in coordination with Asset Management & Operations ("AMO") department.
• To provide support with CMMS development and implementation.
• Assist maintenance strategy, task list structures, maintenance plans, procedures & scheduling, etc.
• Scheduling/ smoothing of plans.
• Assist with development of Asset Integrity documents for new projects.
• Any other tasks assigned by the direct line manager.

Comply with HSE requirement documents listed below:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Diploma/ Higher Nitec in Engineering or a relevant field.
• Experience in the industry is preferable.
• Strong communication and interpersonal skills.
• Proficiency in Microsoft Office Suite.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

The Kindergarten and Elementary School seek enthusiastic and experienced Learning Support Assistant Teachers to join our growing inclusive Education and Therapy Team. The successful candidates will have a passion for inclusion and supporting all students to meet their potential. They will work with our Learning Support Teacher to provide intervention and support for students under the classroom teacher's direction. They will also be part of our wider team developing inclusive provisions and therapies.

This is an excellent opportunity to work within a growing team in an inclusive international school. You will have the chance to work alongside and learn from on-site professionals including Speech & Language, Occupational Therapy, and Social-emotional Learning Specialists

Position requirements:

As part of the inclusive Education and Therapy Team, you may work across the Kindy and Elementary Schools to support multiple students with wide-ranging needs and abilities. This may include direct work to support students on a 1:1 or small group basis.

Supervision of children on the playground. Some basic personal care and toileting duties.

Experience in an International School setting is preferred, but not essential

Experience in supporting children with mild-moderated additional learning needs and Autism is required. Where candidates have experience in supporting students within an Early Intervention model, this would be advantageous.

The role requires excellent communication skills, time management, and adaptability. You should be a patient and empathetic early educator who is passionate about providing a nurturing learning environment.

Working collaboratively and participating in the wider school community is essential. You will be expected to attend all staff meetings and professional development sessions as required.

Qualifications:

Due to the nature of the role, candidates with a background in Early Years Education, Special/Inclusive Education, and /or Teaching are preferred.

A minimum Diploma is required. Recent university graduates are also welcome to apply

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

On behalf of our client, we are looking for a suitable candidate to join them as a Customer Support Assistant

Job description

• Reports to Contact Centre Team Lead

• Handle customer service hotline and provide the first level of support from multiple Channels

• Resolve customer queries efficiently and escalate problems/issues promptly.

• Follow Standard operating procedures closely.

• Work as a team and ensure that the contact center service level is met

Requirements

• Diploma / NITEC / GCE ‘O' Level or equivalent

• Minimum C5 for English O level

• Preferably with 1 to 2 years of working experience in a call centre environment and/or service-related industry

• 3 Rotating shifts - day and night with shift allowances

Morning shift: 730am to 5 pm

Day Shift:1pm to 10.30 pm

Night shift: 10.30pm to 8am

Knowledge or Skills

• Pleasant disposition with good communication skills

• Fluency in a second language

• Computer literate and good typing skills

Work location: East (near to MRT station)

Type: Permanent

EA Registration: 22C0971|EA License No.: R21101298

Qualification (s) – BE/ BTech/ MTech/MS/ PhD

Domain - Electronics, Electrical, Computer Engineering or Computer Science Engineering.

Experience – Fresh Graduate Diploma with 0 to 2 years experence including IHL and Singapore Polytechnics Graduate with EEE qualifications.

Job Description –

RTL coding and module-level verification of digital IC circuit blocks

Assist DV engineering team for system-level verification and debug

Assist in creating and maintaining design documentation

Assist in the completion of sign-off GDSII working with DFT and PD engineering teams.

Requirement –

Highly motivated and driven to solve challenging design problems

Able to read and understand the architectural specifications at the sub-

system/chip level

Comprehend the Power-Performance-Area trade-offs in the development of micro-architecture

Proficient with at least one programming language

Preferred experience –

Concentration/major in IC Design

Hands-on experience in digital IC design

Knowledge of industry Protocols – PCIe, NVMe, USB4.0, DDR, AXI, CHI, AHB, MIPI, Display port, Ethernet etc.

Design Techniques – Low-power, UPF, Clock Domain Crossing (CDC),

Booting/Reset Flow

Proficient in a scripting languages – Shell scripting, Python, Tcl, PERL etc.

Responsibilities

• Manage IT infrastructure (including SDWAN and cybersecurity solutions), servers (including VM) and backup solutions (on-premises and cloud)
• Manage various IT assets including user PC, Retail POS and peripherals, printers (including barcode printers), electronic shelf labels, digital signage, mobile phones and tablets etc.
• Manage various SAAS solutions including Microsoft 365
• Problem solving, troubleshooting & user support
• Project management of IT initiatives
• Liaising with various external vendor solution providers
• User training, UAT, user/system documentation and change management.
• Assist in developing and implementing IT policies, protocols, procedures, solutions, and best practices including incident reporting on containment and remediation.
• Be part of project management team on IT initiatives (including system updates and migrations) starting from managing timelines, requirements gathering, specifications, sourcing of solutions, evaluation of solutions, managing implementation process including UAT, user training and system documentation.
• Assist to conduct regular system audits, regular checks on network and data security and testing to detect issues within the IT systems.
• Identify opportunities to improve and update software and systems for higher productivity.

Prerequisites

• Minimum 3 years work experience in IT support, systems administration, or network management, experience in setting up or maintaining basic infrastructure (networking, server setups) is a plus.
• Diploma in Computer Science, Information Technology, Network Engineering, or related field.
• Familiar with configuring and maintaining servers, workstations, and network devices.
• Good analytical, logical and problem-solving skills.
• Team player and able to independently and self-motivated.
• Able to communicate clearly with both technical teams and non-technical staff.

JOB HIGHLIGHTS

· Machine design in Mechanical aspect, Jig and Fixture, Equipment and development

· Provide Conceptual, mechanical part detailing and cost estimation

· BOM & machine manual writing

· Handle customers’ enquiries and issues

· Conduct machine acceptance with customer

· Co-ordination with sub-contractors for machine build

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

REQUIREMENT

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

· Able to work independently and within schedule

The successful applicants will work in the Operations Department – involve in the logistical functions for events and furniture movement, maintain the cleanliness of designated areas, work alongside other members of the school’s traffic control team ensuring the safety of users in the school grounds.

Requirements:

• Minimum completed PSLE

• Able to understand and speak simple English

• Experience in cleaning work and in handling cleaning equipment

• Able to communicate and work well with colleagues

• Willing to work overtime on weekdays and weekends if required

Key Responsibilities

1. Events

• Assist in setting up and tearing down staging/seating for events as required; and
• Assist in preparation and handling of equipment/resources/refreshments for events/ meetings.

2. Logistics

• Assist in moving/transferring/transporting of items both in-house and off-site locations when required; and
• Be responsive and committed to meet the users’ requirements and needs.

3. External Housekeeping

• Maintain cleanliness in designated areas to plan;
• Be proficient in usage of cleaning equipment/machinery; and
• Ensure that the cleaning storage area is tidy and clean.

4. Traffic

• Assist the children in entering/alighting from vehicles at designated drop-off/pick-up points in the school; and
• Assist in guiding vehicles and pedestrians for a smooth flow of traffic.

5. Safety

• To be conscious of safety when carrying out duties in all areas;
• To follow safe work procedure in manual handling, operation of machines, use of electrical tools; and
• Put on personal protective gear provided such as safety glasses, gloves, safety shoes, and water boots.

6. Organization

• To adhere to duties roster as scheduled by the line manager;
• Maintain orderly storage of furniture/equipment/event supplies for operational usage ready;
• Organize and look after areas and equipment;
• Report any organizational problems to the line manager or whomsoever delegated the responsibility as appropriate; and
• Required to put in overtime on a regular basis.

7. Communication

• Communicate regularly with line manager on any organizational issue;
• Communicate with users related to job requests; and
• Build a good working relationship with colleagues.

8. General

• Maintain a high standard of personal appearance, including uniform;
• Maintain a high standard of conduct and behaviour that is sensitive to children;
• Be punctual and have a positive attitude to attendance;
• Be willing to move from one set of duties to another as needs arise; and
• On an annual basis, complete the Review and Development exercise and undertake identified development opportunities. Maintain an accurate and up to date record of all Professional Development opportunities.
• Be responsible for reporting any concerns about a child to the Designated Safeguarding Lead.
• Embrace the School’s commitment to creating a diverse and inclusive environment.

Personal Attributes

• Able to understand and speak simple English;
• Have a commitment to punctual timekeeping and good attendance;
• Be willing to work overtime on weekdays and weekends if required;
• Positive attitude and good initiative and
• Able to work independently as well as a good team player.

The school is committed to safeguarding and promoting the welfare of children and young people and expects all staff and volunteers to share this commitment. We will conduct thorough background checks on all successful applicants.

5.5 day week. Interested applicants, please email with an application letter and detailed resume, stating your current and expected salary, date of availability and contact number to [email protected].

(Only shortlisted applicants will be notified)

CPE Registration No.: 196100114C | Period of Registration: 7 June 2023 to 6 June 2029

Position Summary:

The Software Engineer (Industry 4.0) is primarily responsible for driving and executing the Industry 4.0 digital transformation roadmap within the scope of Manufacturing Execution System (MES) and Robotic Process Automation (RPA).

We are looking for passionate individuals who are willing to learn, deliver effective user-centric solutions and able to collaborate and drive projects with cross-functional teams.

Responsibilities:

• Develop and manage existing MES as part of our Industry 4.0 digital transformation roadmap with compliance to data modelling standards and security requirements.
• Explore and drive projects utilizing RPA to automate processes and administrative tasks by collaborating with cross-functional teams.
• Training, knowledge transfer and documentation of developed solutions to operational teams
• Any other ad hoc duties as and when required.

Requirements:

• Diploma or Degree in Computer Engineering or Computer Science
• Preferably at least 1 year relevant working experience in a software development environment
• Solid grasp of software development fundamentals
• Strong analytical skills to translate and optimise business needs into IS/IT solutions
• Excellent communication and presentation skills
• Experience in project management and ability to collaborate with cross-functional teams
• Hands-on experience with UiPath or other RPA tools
• Full stack development in field of web applications, hands-on experience with PHP, C# and Rust
• Experience working in a manufacturing environment
• Presentable, pleasant with strong interpersonal skills
• Self-motivated and possesses positive attitude with strong sense of responsibility
• Good communication skills and the ability to work well in a team
• Proficient in English both spoken and written

Eigen Energy is a systems integrator for solar energy and electric vehicle charging infrastructure, with technical competencies in engineering and construction, energy management, software engineering and cross platform integration.

We are looking for a Assistant Engineer to assist with the scheduling, planning, forecasting, resourcing, and managing of technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

Roles & Responsibilities

• Lead installation team to carry out solar panel installation works which include installation of solar panels on the roof, installation of solar PV inverter and connection to the existing electrical switch board
• Manage multiple solar installation projects across Singapore
• Liaise with client, contactors and internal teams to ensure ontime project delivery
• Execute project installation with the M&E shop drawings provided by engineer
• Assist with ad-hoc duties if needed

Requirement:

• Minimum 2 years of working experience in electrical engineering, solar field is preferred
• Able to read and understand M&E shop drawings
• Able to work outdoor, under the sun

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

• Work closely with internal and external stakeholders to manage the technical risk, security operation and SOC.
• Act as IT security expert for department in the areas of cyber security assessments, PAM, Database, WAF, Firewall and EPP/EDR.
• Perform risk assessment and identify mitigation controls for the risk area identified.
• Enhance and build cyber threat detection user cases and assist in analyzing and reducing false positive.
• Identify infection/compromise in the company utilizing threat intelligence and indicators of compromise (IOCs) from different threat Intel sources and regulators.
• Ensure all compliance and security control functions are performed timely and orderly.
• Drive continuous improvement of procedures and processes related to cybersecurity process and operations monitoring.
• Track, monitor and valid security-related and risk issues, provide an action plan to rectify the issues and prevent recurrence.
• Generate security reports and metrics as required.
• Provide timely and periodic update to managements on its security matters.
• Stay current on the latest Cyber threats, Attacks and vulnerabilities etc.
• Good diploma or degree in Computer Science, Digital Forensic or Engineering preferred.
• Preferred minimum of 6 years of relevant work experience in IT security auditing or security operation role.
• Strong knowledge in internet infrastructure, networking technology and security (i.e. DNS, DHCP, Firewall, WAF, IDS, IPS, VPN, APT and TCP/IP protocols)
• Working experience with major SIEM will be advantage
• Strong practical experience in Cyber security: Cyber kill chain, TTP, threat intelligence, malware triages.
• Demonstrated ability to multitask and is detail-oriented with inquisitive mind during case investigation.
• Good team player with strong communication skills with project teams, stakeholders, senior management, and contractors including both technical and non-technical personnel.
• Professional security related qualification (e.g. CEH, ECIH/GCIH, and ITIL) will be favorable although not mandatory technical skills

Responsibilities

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

Competency Requirements

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

Your responsibilities include, but not limited to:

1) Responsible for conducting field (on-site) audit on outdoor cleansing activities, including safety compliance, to ensure that quality service is consistently maintained;

2) Responsible for investigating Defect Notices and propose corrective actions to Operations Executive to prevent recurrence of similar complaints;

3) Responsible to reducing recurrence lapses through continuous improvement of work methodology e.g. case studies, min 2 projects a year

4) Perform compliance audit to ensure the operation sites and company leased residential units are complying to the regulatory requirements and/or contractual obligations.

5) Participate in the deployment of special projects such as pandemic disinfection and chemical spillage post clean-up cleaning

6) Conduct QEHS briefing, with relevant multimedia content, on site to ensure worker competencies are met, to conduct monthly

7) Conduct QEHS Inspections on site to ensure compliances to in-house and regulatory requirements

Requirements

• Minimum Advance Certificate / Higher Nitec or equivalent education

• Must possess driving license class 2B and motorcycle

• Basic knowledge of Microsoft Office applications (Able to prepare simple reports)

• Applicants must be comfortable working outdoors

• Required to do night audit periodically

• Require to be on standby for ad-hoc activation for special cleaning job

• Positive attitude, willing to learn and able to work independently

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Job Opportunity: Sales & Customer Support Assistant (Entry-Level Role)
Location: Singapore | Join Our Growing Team!

Are you ready to kickstart your career in the food industry with a vibrant and expanding food manufacturing company? We’re looking for a motivated and positive individual to join our team as a Sales & Customer Support Assistant. This role is ideal for those seeking hands-on experience in a dynamic environment, helping customers and supporting our sales team.

What You'll Do:

• Handle daily sales order processing, including taking orders via phone.
• Assist with all incoming inquiries (phone, email, fax, and walk-ins).
• Manage sales orders, prepare delivery orders, and issue invoices.
• Help prepare and label packing materials.
• Address customer complaints with patience and professionalism.
• Support your team with additional tasks as assigned.

What We’re Looking For:

• Positive Attitude: A friendly and proactive approach to work.
• Language Skills: Ability to communicate in Mandarin (for effective communication with Mandarin-speaking customers).
• Minimum Education: PSLE or equivalent.

Why Join Us?

• Gain Experience: Build valuable skills in sales, customer service, and logistics.
• Career Growth: Be part of an expanding company with future growth opportunities.
• Work-Life Balance: 6-day work week with a scheduled off day.

If you're enthusiastic about learning, can speak Mandarin, and are eager to work in a fast-paced food manufacturing environment, we want to hear from you!

Apply Today and Start Your Journey with Us!

Junior / Technical Game Designer (Hybrid Casual Mobile Games)

• Full time/Permanent
• Monday to Friday, 10am to 7pm
• Comes with 13-mth Annual Wage Supplement
• Free office snacks & drinks
• Company provides AIA Group Health & Surgical/Outpatient Medical Benefits
• Location: Labrador Park - mTower

We are currently looking for a motivated and skilled Junior / Technical Game Designer who plays a wide range of Hybrid Casual Mobile Games.

Job Description:

• Create detailed game content, including features, map layouts, tutorials, meta systems, and character abilities.
• Design captivating and engaging core gameplay experiences.
• Conduct research on trends in casual mobile gaming and develop proposals based on findings.
• Manage game design documentation (GDDs) effectively.
• Optimize game performance and user experience.
• Perform data entry tasks and maintain thorough documentation.

Job Requirements:

• Possess Diploma/Degree in related Games Design discipline (such as from NUS, NTU, SMU, Digipen etc welcome)
• Plays a wide range of easy to mid core hybrid casual games
• Possess 1-3 years background in game designing / game development (front-end) using Unity
• Advanced experience in comprehensive knowledge and interest in mobile social gaming industry
• Strong in creating detailed GDDs
• Excellent command of Excel Data sheets
• Excellent communication – active listening skills, accessible verbal and written presentation
• Able to work independently and under pressure and produce results under sometimes tight schedules
• Self-directed within a team context
• Creative, innovative, positive problem solving perspective

Job Types: Full-time, Permanent

Job Description:

DxD Hub is seeking an experienced UI/UX engineer for our product development for our Digital Diagnostics Team. In this role, you will play a crucial role in driving the user interface and experience of digital health products in collaboration with external partners (especially clinicians). The ideal candidate should possess a strong usability engineering skills and able to translate expectation to visualisation and handover to technical team.

Job Responsibilities:

• Design innovative app experiences based on the understanding of personas, their behaviors and needs as well as competitive market insights.
• Collaborate with partners to understand their goals and propose a user-centric approach to improve digital services.
• Communicate design ideas through tools such as sketches, user journeys, storyboards, mind maps, wireframes, and clickable prototypes.
• Drive user research activities such as, usability testing, user interviews, surveys, and translate research findings into meaningful recommendations.
• Guide all aspects of UX including design research, design strategy, user experience, usability testing, interaction/content design and prototyping.
• Work closely with Product Owners to ensure all design work meets user needs and business requirements.
• Create a design-minded environment and build design capabilities amongst project team members.

Job Requirements:

• Degree or Diploma in Human Computer Interactions, Design, Psychology, Computer Science or related fields
• 1-2 years’ experience in user-centered design with hands on experience building visual identities for web and mobile app UI.
• Experience in delivering wireframes, UX flows, mockups, interactive prototypes, design specifications, and final assets.
• Experience with design/wireframing software such as: Figma, Sketch, Adobe suite, or equivalent.
• Strong portfolio showcasing your best design work for web and mobile.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

DxD Hub is seeking an experienced UI/UX engineer for our product development for our Digital Diagnostics Team. In this role, you will play a crucial role in driving the user interface and experience of digital health products in collaboration with external partners (especially clinicians). The ideal candidate should possess a strong usability engineering skills and able to translate expectation to visualisation and handover to technical team.

Job Responsibilities:

• Design innovative app experiences based on the understanding of personas, their behaviors and needs as well as competitive market insights.
• Collaborate with partners to understand their goals and propose a user-centric approach to improve digital services.
• Communicate design ideas through tools such as sketches, user journeys, storyboards, mind maps, wireframes, and clickable prototypes.
• Drive user research activities such as, usability testing, user interviews, surveys, and translate research findings into meaningful recommendations.
• Guide all aspects of UX including design research, design strategy, user experience, usability testing, interaction/content design and prototyping.
• Work closely with Product Owners to ensure all design work meets user needs and business requirements.
• Create a design-minded environment and build design capabilities amongst project team members.

Job Requirements:

• Degree or Diploma in Human Computer Interactions, Design, Psychology, Computer Science or related fields
• 5 years’ experience in user-centered design with hands on experience building visual identities for web and mobile app UI.
• Experience in delivering wireframes, UX flows, mockups, interactive prototypes, design specifications, and final assets.
• Experience with design/wireframing software such as: Figma, Sketch, Adobe suite, or equivalent.
• Strong portfolio showcasing your best design work for web and mobile.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

We are hiring a lead engineer for the software development of healthcare application platform. The potential candidate will be involved in the development and solutioning for the transformation of Singapore Healthcare IT landscape. The candidate will be working with a team of dedicated & committed engineers to deliver the next generation healthcare digital experience across whole of Singapore

• Translate business requirements into technical architectures & detail design, including resilient integration with external systems

• Develop solutions in hybrid cloud environment

• Design robust application that complies with IT Policies

• Hands-on development and mentoring of junior team member

• Work closely with DevOps engineer for Release management

• Bachelor's Degree, Post Graduate Diploma, Professional Degree in Computer Science, Information Technology.

• 8+ years of relevant work experience in software product development.

• Experience developing applications using native cloud service offer by AWS or Azure

• Experience with Containers and Orchestration such as Kubernetes/OpenShift

• Experience in design and implementation of REST API, and ensure the API is compliant to healthcare industry standards HL7 FHIR

• Experience in Microservice architecture design and implementation

• Hands-on development experience for Backend application (C# .Net core)

• Knowledge and experience in frontend development (e.g. Reactjs) will be advantageous

• Sound knowledge and experience in application design patterns

• Experience in Azure DevOps or equivalent CI/CD

• Position : Project Engineer (A&A Construction/Junior Role) - Up to 5,500 + Bonus
• Office Location : East - Aljunied
• Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm
• Salary (commensurate with experience) : Up to $5,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Construction Sector - A&A / Building Works

Main Responsibilities:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued.
• Prepare method of statement and work procedure
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied
• Oversee drawing management and control of technical documentation
• Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage.
• Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order
• Any other duties assigned

Requirements:

• Minimum of Degree in Architectural/ Building / Construction Management or related; with at least 1 year of experience with restoration projects.
• Great team player with pro-active attitude.
• Bilingual in English and Mandarin to liaise with Mandarin speaking associates

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Responsibilities:

• Report to Project Manager /Site Manager for the Arrangement of work
• Liaise with consultants for the submission and approval of materials and shop drawings
• Responsible for planning, programming and monitoring of work progress on site
• Co-ordinate the inspection work by Resident Engineer and clerk of works
• Handling technical and engineering problems on site
• Ensure site safety and proper execution of site work procedure on site
• Monitor and co-ordinate the works of subcontractors
• Structure and Architectural work
• Set up accounts and workstations .
• Monitor performance and maintain systems according to requirements .
• Troubleshoot issues
• Ensure site safety and proper execution of site work procedure on site
• Willing to work on Sites (under hot sun)

Job Requirements:
Degree/Diploma in Mechanical Engineering or related
Preferably 3 years of experience on project management and building construction projects
Good communication and interpersonal skills
Software skills on MS Project and ACAD preferred

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

Responsibilities:

• Lead coordination activities with external System Wide Contractors and execute LTA and SMRT projects.
• Attend interface and coordination meetings with LTA, SMRT, and various System Wide Contractors.
• Oversee project-related site installation schedules and manage site subcontractors.
• Monitor and supervise all site activities and work progress.
• Prepare documentation, including Method Statements, Risk Assessments, Project Schedules, and Work Procedures.
• Arrange weekly meetings with the internal Project Manager to discuss work schedules and plan resources.

Requirements:

• Minimum Diploma in Electrical/Computer Engineering from a recognised local polytechnics.
• Relevant experience in site coordination for LTA/SMRT projects.
• Strong interpersonal skills and a positive attitude.
• Ability to work independently with minimal supervision, demonstrating leadership and proactivity.
• A team player who is confident in leading, supervising, and supporting various Project Managers with site activities.
• Capable of multitasking in a fast-paced environment with tight project deadlines.
• Proficient in communicating with LTA, SMRT, and various System Wide Contractors.