Total 546 job vacancies in d12 balestier serangoon toa payoh

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

We are seeking an Engineer with Silicon photonics experience to work on photonics integrated chips design and engineering. The scientist will work on device design, photonic circuit and layout with commercial Si photonics fabrication and optical to electronic testing and measurements. In addition, engineer work on advanced packaging knowledge for chip integration.

Responsibilities

• Conduct research and development for Silicon photonics chips
• Design photonics integrated circuit
• Perform optical and photonics simulations and optimization
• Work with Si photonics foundry for fabrication
• Perform optical and electronic measurements

Qualifications

• PhD or Masters Degree in Science and Engineering, Physics or Applied Physics or related discipline to Optics and Photonics
• At least 2 years working experience
• Candidate is expected to be familiar with optical, thermal, multi-physics, and system simulation software (such as Ansys Lumerical, RSOFT, Zemax, and COMSOL) photonic layout software and understanding of Si Photonics fabrication
• Experience with optical and electronic test and measurements
• Commercial Si Photonics product design and product engineering is preferred

• Complies with approved standards of nursing practices.
• Provides nursing services requiring substantial and specialised nursing skills.
• Works closely with patient’s doctor and multidisciplinary team to provide care to the patients.
• Updates on changes in patient’s conditions and needs.
• Ensures care delivery and nursing interventions as outlined in the care plan.
• Evaluates the patient’s response to care interventions and recommends revision of care plan as necessary.
• Works with Allied Health professionals and/or initiate preventive and rehabilitative nursing procedures.
• Carries out and supervise assessments of new admissions.
• Prepares and administers medications to residents and comply with safe medication practices.
• Responsible for safe keeping of control drugs.
• Participates in training and development of care staff.
• Manages any emergency that arises and ensure prompt actions to mitigate the situation and escalate promptly to supervisor, where necessary.
• Works with staff to maintain a safe and clean environment in the nursing home.
• Participates in quality assurance activities to monitor and evaluate the quality and appropriateness of nursing care.
• Participates in quality audits that are planned and conducted periodically.
• Contributes to the evaluation of staff performance appraisal with Nurse Manager.
• Deputizes the Nursing Manager in his/her absence.
• Assumes additional responsibilities as assigned by Nursing Manager, Senior Nurse Manager, and Head (Nursing).

General Summary of Responsibilities:

• Heads a Property Management Sub Team.
• Responsible to the Director (Ops) for the business result of the Team.
• Undertake continued development of the Team in accordance with the approved business plan.
• Source business for the company / division generally by client contact, networking as well as general promotion of PFS services.
• Undertake training and development of the people within the Team and promote an on-going career path for them within PFS.
• Provide leadership, managerial direction and personal encouragement to all employees within the Team, including guidance on all property management procedures.
• Responsible for the efficacy of complaints management within the Team.
• Liaise with existing building owners on property management performance, including the use of tenant and client surveys.
• Prepare agendas, minutes recording and convene and attend all Council meetings and Annual General Meetings

Requirements

• Degree / Diploma in Building/ Real Estate Management or other related discipline with minimum 6 years of property management experience; inclusive of at least 3 years in a managerial role
• Experience in MCST work and knowledge of BMSMA is a must.
• Matured and independent with the ability to lead team
• Strong negotiation, communication and leadership skill
• Diligent, well organised and committed to excellence

Roles & Responsibilities

• Learn from main teachers
• daily routine care for kids from 18 months to 6 years old
• providing basic care and care giving activities
• to write own lesson plan based on school curriculum
• feedback and communicating with parents regarding kids' prerformance/progress
• evaluate children's performance to make sure they are on the right track
• collaborating with other teachers
• Work and Study at the same time. will have a mentor to guide you
• Will get to learn from mentor and main teachers
• Will be able to deliver English lessons - for English Language teacher
• Will be able to deliver Chinese Lessons - for Chinese Language teacher

WE DO Welcome mid career switch. Come have a talk with us.

LOCATION:

SERANGOON (walking distance to MRT)

CHILDCARE CENTRE

LEARNING KIDZ

Call Cecilia at Hp 90690910 or email : [email protected]

Roles & Responsibilities

• Learn from main teachers
• daily routine care for kids from 18 months to 6 years old
• providing basic care and care giving activities
• to write own lesson plan based on school curriculum
• feedback and communicating with parents regarding kids' prerformance/progress
• evaluate children's performance to make sure they are on the right track
• collaborating with other teachers
• Work and Study at the same time. will have a mentor to guide you
• Will get to learn from mentor and main teachers
• Will be able to deliver English lessons - for English Language teacher
• Will be able to deliver Chinese Lessons - for Chinese Language teacher

WE DO Welcome mid career switch. Come have a talk with us.

LOCATION:

SERANGOON (walking distance to MRT)

CHILDCARE CENTRE

LEARNING KIDZ

Call Cecilia at Hp 90690910 or email : [email protected]

Key Responsibilities:

• Liaise with Solutions team to understand systems design
• Perform installation, configuration and maintenance of network devices and AD server / management server on-site
• Assist Project Managers and Engineers to prepare systems related diagram for the project implementation
• Ensure systems design conforms to contract and technical requirements
• Engage with back line support and/or with vendor’s support to diagnose and rectify technical problems to effectively resolve project implementation issues
• Attend to preventive and corrective maintenance to backend system
• Ensure all work activities comply with the company’s safe work procedures

Competence (Knowledge, Skills and Abilities):

• Skills in relating to and servicing the customers with a win-win mind set
• Skills in troubleshooting technical problems related to servers, routers, switches, and IoT devices.
• Good knowledge of the security and surveillance solutions landscape and industry trends
• Knowledge on Microsoft Clustering, Active Directory, Agent VI, Milestone, VMware and IT Security is required
• Knowledge of CentOS, Ubuntu, VMware (ESXi), Firewall, Networking, and Windows Server OS
• Proficient in Active Directory, Certificate Services, Virtualization technology, and cyber security is required
• Skills in planning and scheduling
• Professional Certificate in MCSE and CISSP would be an advantage

Requirements:

• Minimum Degree in Computer Engineering or related discipline
• At least 3 years’ experience in a similar capacity
• Experience in installation on Server / Client configuration, Network Storage and IT Network

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

Position Overview: We are looking for a dedicated and knowledgeable Application Engineer to join our team. In this role, you will focus on providing comprehensive training and technical application support to our clients utilizing our construction finishing robots including painting and skimming robots. Your expertise will ensure clients can maximize the benefits and efficiency of our robotic systems.

Comprehensive local and overseas training will be provided for selected candidate, culminating in a certification upon successful completion.

Key Responsibilities:

• Deliver hands-on training sessions for clients and operators on the effective use and maintenance of our painting robots.
• Provide ongoing technical support and troubleshooting assistance to clients to resolve operational issues with the painting robots.
• Collaborate with the engineering and robot development teams to provide feedback gathered from training sessions and client interactions.
• Conduct site visits to evaluate robot performance and provide tailored recommendations for optimal usage in specific construction environments.
• Assist in the setup and configuration of finishing robots for various projects, ensuring adherence to project specifications.
• Stay informed about the latest developments in robotic technology and painting processes to continuously improve training content and support services.
• Facilitate workshops and seminars to educate potential clients about the benefits and functionalities of robotic painting solutions.

Qualifications:

• Diploma/Nitec in Mechanical Engineering, Electrical Engineering, Robotics, or a related field.
• Fresh Graduate will be considered
• Experience in application engineering or technical support, preferably in robotics or automation will be an advantage
• Good basic understanding of robotic systems and their applications
• Good communication skills with the ability to explain technical concepts to diverse audiences.
• Problem-solving skills and a customer-focused approach to support.
• Willingness to travel to client job sites for training and support as needed.

Responsibilities:

• Managing site progress, technical specifications and manpower resources
• Running the project within the allocated budget
• Sizing up the costing for variation order if there is additional and alternation work
• Preparing the project implementation schedule, carrying out the implementation, monitoring delivery, site installation, inspection and handover schedule in accordance to planned project schedule
• Conduct project meetings, site surveys, prepare project submissions, system designs and installation drawings
• Communicating with stakeholders regarding project needs and goals
• Contribute to the planning and development of projects
• Supporting the coordination and management of projects
• Researching information as required
• Admin tasks such as preparing invoices, estimates, scheduling meetings
• Keeping track and reporting on project progress
• Ensure that works activities are carried out in accordance with the Workplace Safety and Health Act and its regulatory requirements.
• Ensure that all staff and sub-contractors are wearing all appropriate PPE during work activities
• Report any incident, accident, near miss, occupational disease, dangerous occurrence, or suspicious risks associated with the threat of terrorism so that prompt action can be taken to address them

Requirements:

• Degree in Electronics & Computer Engineering or related discipline
• Minimum 9 years of engineering or IT experience, with 6 years’ experience in the management and implementation of Integrated Security Management System (ISMS) works
• Non-Degree holder with minimum 12 years of relevant experience may be considered

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

• Recognised degree in civil engineering, construction management or related field.
• Minimum 5 years of experience in construction planning and preferably in MRT or large scale infrastructure projects.
• Profeciency in construction progress planning, data analysis and using BIM software such as Primavera P6, AutoCAD, Navisworks, Power BI & etc.
• Strong understanding and knowledge of tunnelling and underground construction and cut and cover technigues.
• Proven ability to analyse critical paths, manage project timelines and adapt plan effectively.
• Monitor project progress and adjust plans as necessary to mitigate risks and meet deadlines.
• Preparation of progress reports by forecasting and identifying delays and bottlenecks.
• Familiarity with ERSS walls, pile extraction, contaminated ground, railway protection requirement, WSM and large diameter bored tunnels.
• Able to work under pressure and manage multiple priorities.
• Applicants are required to submit their detailed CV and indicate the current and expected salary.

Job Description and Responsibilities :

• Develop and execute ideas from conceptualization for events and exhibitions.

• Work closely with the teams to ensure alignment of design to client's requirements.

• Ensure that all design work is completed to the highest standard.

• Strong technical knowledge.

Requirements:

• Knowledge of software :3D Max/sketch-up, Auto-Cad, Photoshop, Illustrator.

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

job Description & Requirements

Job Objectives/Job Summary:

As a Customer Service Executive, he/she is required to ensure customers receive outstanding support and all their needs are met. He/she oversees the customer support department’s day-to-day functions as well as establishes standards and protocols to be used by the customer service team to promote customer satisfaction.

Responsibilities/Duties:

· Prepare quotations and submit to customers

· Handling/processing of customer sales order

· Monitoring of delivery status

· Logistic arrangement/coordination for local and overseas shipment

· To support sales personnel in new project coordination

· Supporting sales team in processing documentation for sales

· Ensure customer satisfactory are met

· Coordinating with internal department on job orders and requirement

· Follow standard operating procedures

· Any other ad-hoc duties as assigned by HOD

Epsilon operates a global IP/MPLS network as well as supporting transmission networks. We are seeking a candidate with strong IP/MPLS skills and experience. The candidate would be responsible for ongoing network optimization and technological development for our global IP/MPLS network which support layer2 and layer3 VPN services. The candidate should also express a willingness to participate in projects related to transmission network upgrades and planning exercises.

Responsibilities

• Responsible for the deployment and management of the global MPLS and VPLS (E-Line, E-LAN and IP-VPN) infrastructure.
• Work with solutions design, and technical sales teams to develop complex service solutions for bespoke customer applications.
• Responsible for the deployment and management of the global IP transit, IP peering, and the connection to IXP and CSP.
• Work cross-functionally with product team and project management to generate implementation plans including Method of Procedure (MOP), Bill of Materials (BOM) and Scope of Works (SOW)
• Participate in optical transmission network upgrades and migrations as needed.
• To take up the on-call rotation and out of hours work when required
• Maintain technical and training documentation and develop automation as needed.
• Provide guidance and training to NOC when required

Requirement

• 5+ years of working experience in telecom provider, ISP, CSP or content provider.
• Experience working within a multi-vendor network environment – Juniper, Alcatel-Lucent/Nokia and Cisco are relevant.
• Experience working with network automation tools (Ansible, Python, Jinja, Git) a plus
• Extensive knowledge and experience in Layer 2 switching and Layer 3 routing technologies and protocols including TCP/IP ,OSPF, BGP/MP-BGP, IS-IS, MPLS and RSVP etc.
• Experience working and knowledge in security and firewall.
• Experience working and knowledge in SD-WAN/SASE is a plus
• Knowledge or prior working experience with optical networks is a plus, but willingness to learn and understand the design and operational aspects of transmission technologies is required.
• Demonstrated ability to meet deadlines among multiple concurrent projects
• An enthusiastic and helpful attitude
• Willing to learn new technologies
• Must enjoy working in a fast-paced environment where a strong ability to multi-task is necessary
• Must be highly detail-oriented

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Job Description Responsibilities:

• Ensure the projects are fully attended and completed to meet agreed deadlines
• Supervising the project progress to ensure that issues of the project are identified and solved
• Attend meetings, liaise and manage clients to complete project deliverables
• Experience managing a team on site at an event, ability to troubleshoot on site and react, provide solutions to the internal team, external suppliers and clients alike.
• Working with Management to adapt strategy with objectives continuously improving on SOPs where necessary.

Skill Requirements

• Strong project management skills
• Observant and paying great attention to detail
• Good interpersonal skills and effective communicator
• Problem solver and creative
• CIVIL Engineering graduate
• AUTO CADD knowledgeable at least 1 year experience

Job description

• Bank Reconciliation
• Handle full Spectrum of Account Receivables and Account Payable.
• Verifying and Processing supplier invoices.
• Check and verify staff claims.
• Prepare payment via various modes.
• Maintain daily cash/bank book.
• Answering phone calls from customers/suppliers.
• Prepare monthly payment schedules.
• Handling partial sets of accounts and assisting in month-end-closing.
• Assisting in ad-hoc duties assigned by superior.

Duties and Responsibilities:

• Handle and support AR & AP function
• Assist in the production of financial statements and applications, preparation of spreadsheets, reports and correspondence as required.
• Perform proper document filing and control.
• Prepare and manage correspondence, licenses, agreements, and reports
• Organize and manage own workload to ensure your contribution to the company's monthly financial reporting process is achieved in a timely and accurate manner.
• Other ad-hoc request as assigned by the management.

Requirements:

• Minimum Diploma in related field.
• Fresh graduates are welcome.
• Exposure with Food & Beverage (F&B) industry will be an added advantage.
• Ability to work independently, with little supervision, resourceful, meticulous and organized.
• An effective team player with good interpersonal and able to work well with internal/external stakeholders.
• Proficient in Microsoft Words / Excel / Power Point.
• Positive attitude and a keen interest to learn.
• Able to commence immediately or within short notice will be an added advantage.
• We regret to inform that only shortlisted candidates will be notified.

You will be responsible for FF&E in all design phases (Ph1 to PH4), from design process to project concept, branding, sourcing products, preparing sample boards and producing specitfication and schedules including to obtain material unit cost reference information.

Your role will include but not limited to:

• Working closely with design team in concept and design development.
• Responsible to select and prepare FF&E presentation of materials and finishes.
• Coordinating with design team in developing furniture layout, perspectives and 2D/3D renderings.
• Working closely with Design teams to ensure designs are in accordance to contractual and client’s agreement.
• Ensuring that project assignments are completed within the given deadline.
• Working closely and assist in co-ordination with consultants and clients when the need arises.
• Preparing full sets of FF&E specifications and documentations for tender & construction drawings.
• Reviewing of shop drawings from suppliers and contractors.
• Attending site meetings and site/factory inspection to review materials and furniture.
• Flexibility in handling multiple projects.
• Assisting in overseeing the work & performance of FF&E designers
• Able to coordinator, delegate, give feedback, and mentor subordinates regarding their work

Requirements

• Degree/ Diploma in Architectural or Interior Design or equivalent.
• Minimum 5 years of relevant experience in FF&E especially in hospitality industry.
• Creativity and artistic flair.
• Able to interpret specifications and layouts.
• Passionate and aware of global design trends and FF&E supplies.
• Experienced in handling projects in all design phases.
• Knowledge of site work and progress will be advantage.
• Good understanding of design (composition, planning, materials, details, furniture and fixtures).
• Strong in design detailing and freehand sketching would be advantage.
• Good knowledge of drawing preparation and CAD standard, strong organizational skill and attentive to detail.

Role Profile

This role is accountable for ensuring that everyone on the team knows and executes his or her role, feels empowered and supported in the role, knows the roles of the other team members and acts upon the belief that those roles will be performed.

Key Responsibilities:

• Plan, manage and implement the maintenance operations effectively to ensure PM schedules and CM are carried out within the maintenance budget and Service Level Agreement
• Plan for improvement in the reliability, maintainability and availability of the system
• Ensure the productions system are maintained and conforms to the contract, code of practices and technical requirements
• Prepare and submit monthly maintenance report
• Attend maintenance meetings with customer periodically to constantly upkeep quality standard as per company QMS
• Upkeep obsolescence management on the maintenance for system and ensure proper change request and upkeep proper documentation changes
• Obtain quotations for materials, equipment and contractors required for maintenance operations and raise PO
• Manage and coach a team of technical support engineers and technicians and ensure that the team is adequately trained to perform the tasks given
• Manage the sub-contractors required for the maintenance operation to ensure that works are done in a professional manner
• Prepare training materials and conduct yearly re-training for customers
• Establish procedures for work at site and ensure all safety measures and proper housekeeping rules are observed at work sites. Inculcate the “safety first” attitude in all workers.
• Carry out plan to consolidate/centralise maintenance staff movement and staff competency to increase efficiency in order to improve profitability.
• Implement and update company records e.g. training matrices, performance reviews, risk assessments
• Communicate KPIs from the strategic annual plan so that each staff is aware
• Perform root cause analysis and resolve problems
• Conduct risk assessments of processes and tasks in the department

Competence (Knowledge, Skills and Abilities):

• Understanding and knowledge of the Singapore security and surveillance sector and its operating environment
• Understanding and knowledge of the Singapore security and surveillance technology in their limitations and applications
• Skills in relating to and servicing the end-users with a win-win mind set
• Skills in people management and employee development
• Good understanding of the software and hardware environment for ICT platform and CCTV/network sensors system
• Sound knowledge and experience in IT, IP networking and network security solution/product
• Preferably with a Professional Certificate in Project Management

Requirements:

• Ability to handle multiple responsibilities in a fast paced and performance driven environment
• Able to converse well with customers on enquiries
• Strong technical knowledge with and certification on in-house products
• Able to deal with routine tasks and may perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures and direction
• Class 3 License is an advantage

Education & Experience:

• Degree in Electronics & Computer Engineering or related discipline
• At least 7 years of experience in a similar capacity
• Preference for candidate with security and surveillance experience

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

Job Description

1) Manage and coordinate multiple KAs and responsible for commitment of contract delivery indicators and satisfaction to KAs. Lead business reviews on operation performance and review KPI to achieve requirement and enhance customer satisfaction.

2) Act as customer’s main point of contact to ensure the issue raised are dealt appropriately and be proactive for account management.

3) Proactive for troubleshooting, escalate customer’s pain point and resolve the issues within timeline.

4) Maintain good relationship with customer and related department.

5) Participate for customer related activities; sales, CS, billing, legal, operation, pricing, debt collection etc

6) Update SOPs regularly and share best practices sharing with team members.

7) Sourcing venders for cost reduction plan and provide advises to operation to meet customer requirement.

Requirements

1) Customer-oriented, responsible, positive and pro-active

2) Min. 3 years’ experience in after sales support for KAs of logistic industry. Ability to successfully drive problem solving as a priority

3) Have good data analysis skills and customer service awareness; Have good communication

4) Bachelor degree and relevant work experience. Priority will be given to those with background in international freight logistics and overseas warehouse supply chain services;

5) Priority will be given to candidate who is able to start immediately.

6) Proficient in Microsoft Office.

7) Be fluent in Mandarin and English writing and oral speaking.

We are looking to expand our logistic company to other sector. Your role will be responsible for winning new business by penetrating new clients. This role will be expected to set demanding personal goals, work as hard as necessary to get things done, take challenges head on, and remain resilient in the face of difficulties. We are looking for candidate with 2 to 4 years of experiences in business/logistic field.

Responsibilities:

• Collaborate with other departments, including sales, operations, and finance, to ensure a seamless customer experience.
• Develop SOP’s for strategic accounts in association with Site Manager, Operations Manager, IT Manager and associates internal colleagues where applicable, to detail all processes, rate structure, capturing of customer identified KPI’s.
• Attend targeted networking events.
• Identify current state, desired future state, pains & desired gains of prospects.
• Partner with Account Manager & Carrier Sales to build ideal solution & pricing for the prospect.
• Partner with Leadership, Account Manager & Carrier Sales to identify new opportunities to upsell, cross-sell product & service offerings.
• Build and maintain strong relationships with existing clients and stakeholders. Candidate with outgoing personality is a plus.
• Analyze market trends and competitor activities to identify business opportunities.
• Prepare and present proposals to clients that align with their business needs and objectives.
• Participate in industry events and conferences to promote the company and build relationships with potential clients.
• Prepare and present business development reports to senior management on a regular basis.

We are searching for our next warehouse manager to in charge of receiving, warehousing and distribution operations. You will manage people, processes and systems in order to ensure goods are received and dispatched appropriately, and that productivity targets are met.

• Plan work rotas, assign tasks appropriately and appraise results
• Manage stock control and reconcile with data storage system
• Familiar with in-house software to monitor driver's delivery progress
• Liaise with clients, suppliers and transport companies
• Strong knowledge of warehousing Key Performance Indicators (KPIs)
• Audit and report inventory while making recommendations on which items to order and restock
• Monitor workplace performance and lead training initiatives to improve employees
• oversee the planned maintenance of vehicles or forklift within the warehouse
• have a clear understanding of the company's policies and vision and how the warehouse contributes to these
• visit customers to monitor the quality of service they are receiving

Roles & Responsibilities

Job description:

• Develop trade and marketing strategies to achieve company business objectives.

• Work with and partner the sales team in developing sales and marketing strategies, ensuring department goals are met and sales targets achieved.

• Prepare annual marketing plans for the Sales and Marketing team

• Work closely with S&OP team on demand planning and forecast

• To achieve top-line sales and bottom-line profitability of brands

• To lead market penetration for new launches and skilled in multi-channel marketing

• Conduct scheduled business reviews with senior management and principals.

• To align and achieve both principals and company's objectives.

• New product development planning and launches.

Requirement:

• Degree in Marketing or related discipline

• Good interpersonal and communication skills.

• Knowledge of digital marketing from customer acquisition to customer conversion and loyalty

• Experienced in developing and presenting omni-channel marketing plans.

• Understanding of local and regional consumer insights

• Experienced in marketing within the indications of ophthalmology and dental is preferrable

Full Job Description

Cut tiles and shape them properly to ensure they fit around obstacles and in tight corners and odd spaces using power and hand tools

Form tile beds using concrete, plaster, mastic, cement, glue or mortar utilizing tools such as screeds, brushes and trowels

Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise

Cut, install, polish and surface granite and marble and ensure accuracy during the installation process for lasting results

Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly

Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms

Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles

Follow blueprints precisely and mark and measure surfaces that need to be tiled to determine how to go about jobs