· Work with a wide range of media daily, including wording creation, photography, video editing and etc.

· Update and maintain company website.

· Utilize various digital publishing platforms to create structured drafts.

· Liaise with sales designer/supplier/customer. (E.g.: for update/information needed.)

· Research on industry-related update and focus on trending topics.

· Analyze web function or volume to measure the success of content created. Prepare the necessary update to identify the result(s) and reporting to Director.

· Perform and complete jobs assigned as required by Marketing Manager/Director. (including Ad-hoc duties)

Requirements:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Arts/Design/Marketing/Business or any related fields.
• Minimum 1 year experience in graphic designing.
• Proficient in English.
• Good sense of aesthetics.
• Preferably with web design knowledge.
• Passionate about social media and producing creative content.
• A team player who is also able to work independently.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler), Photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

• To carry out instrumentation related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out instrumentation calculation for the design
• Responsible for reviewing of instrumentation documents and specification from clients and consultants
• To check and review all instrumentation related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim.

• To carry out electrIcal related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out electrical calculation for the design
• Responsible for reviewing of electrical documents and specification from clients and consultants
• To check and review all electrical related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim

Job Description:

• Design of subsystem electronics according to top-level requirements, analogue, digital and mixed signal circuit design, simulation, schematics capture and PCB layout
• Hands-on prototyping of PCBA, circuit debugging/troubleshooting
• Design verification and planning of test criteria, test protocols and documentation of design specifications
• Anticipate the design risk and implement design risk control measures
• Assist in development and testing of firmware drivers for various subsystem modules and such as sensors and actuators (e.g. I2C temperature sensor, accelerometer, vacuum pump, solenoid valve, etc.)
• Work in conjunction with firmware development team for firmware optimization and firmware/hardware bug resolution
• Manage verification and validation activities of electronics hardware including the performance, reliability and regulatory compliance such as EMC and product safety. Implement design changes to resolve failures in a timely manner
• Actively collaborate with cross functional team members throughout the product lifecycle
• Collaborate/liaise with 3rd party contract manufacturers to oversee the PCBA production, ICT/FCT testing and validation

Qualifications/Experience:

• Bachelors/Master’s degree in Electrical/Electronic Engineering
• 3 years of work experience in product development industry. Fresh graduates with good grades can be considered for junior level position.
• Strong theoretical and practical knowledge of analogue and digital circuits, operational amplifiers, MOSFET transistors and precision circuit design. Familiarity with designs involving optoelectronics such as laser diodes, photodiodes is a plus.
• Experience in schematics capture, multilayer PCB layout design using ECAD tools. Altium Designer experience is strongly preferred
• Familiarity with C/C++ programming language is a huge advantage
• Familiar with standard digital communication interfaces such as SPI/I2C/RS232/RS422/USB etc.
• Exposure to medical device development & ISO 13485 quality management system is a plus
• Full exposure to product development life cycle from proof of concept to DFM with proper documentation is a plus
• Excellent communication skills
• Able to work independently with minimum supervision and a strong team player

Overview

MOSFET IGBT engineer/ technical expert (design, manufacture)

There are multiple component development bases in China, and you are required to assist and support the R&D team in China to carry out development work after joining the company.

Description

1. Design/ Development

Use simulation software and layout software to design the structure of the corresponding product, and design the composition of the manufacturing process.

2. Manufacture

Conduct DOE design, identify manufacturing process, and conduct quality evaluation. Cooperate with chip factories to develop, and conduct new product verification such as testing finished products and verification.

3. Quality evaluation

Analyze and organize test data, and apply the technology under research and development to new product development and intellectual property rights.

4、Others

Provide technical support for the company, but also need to assist in various identification and management work.

Experience & abilities required

・Relevant development experience in 6-inch and 8-inch Shield Gate Trench MOSFET, Super-Junction MOSFET IGBT

・3+ years of experience in semiconductor design or manufacturing

・Can use English as working language

・Good logical thinking and communication skills, work hard and have a sense of responsibility for work

・Experience in using simulation software and layout software is preferred

・Experience in IGBT MOS product development, or work experience in semiconductor companies is preferred

Introduction

ETH Zurich is one of the leading universities of the world with a strong focus on science and engineering. In 2010 it established the Singapore-ETH Centre (SEC) in collaboration with the National Research Foundation (NRF) to do interdisciplinary research on pressing problems.

In collaboration with the National University of Singapore (NUS), the Nanyang Technological University (NTU) and University of Illinois Urbana-Champaign (UIUC), SEC is undertaking a research programme on "Future Resilient Systems" (FRS). The FRS programme addresses the challenges with critical infrastructure systems that provide essential services to modern societies, which is of particular importance to innovation-driven economies like Singapore and Switzerland. Within this framework we are announcing the following job opening.

Task/Job description

• This position is under the FRS programme. The researcher will maintain and further develop InfraRisk, an integrated platform for the electricity grid, water network and transport system quantifying the effects of weather-related disruptive events on interdependent systems.
• The platform will be leveraged to design system resilience against disruptive events and across system interdependencies, with a focus on simulating and testing disruption/restoration scenarios relevant to Southeast Asia.
• An important technical aspect will be to model the recovery strategies considering interdependencies between the power, water, and transport systems.
• The ultimate goal of the integrated platform will be to identify features and requirements that aid in developing solutions to improve resilience.

Requirements

• The successful applicant must hold either a Master’s degree with a minimum of 1 year of working experience or a PhD/equivalent University level diploma in electrical, industrial & operational research, civil, mechanical, control engineering, or a related field.
• Principal qualifications include strong programming experience (preferably MATLAB or Python), analytical and quantitative skills and experience with robust optimization.
• She/he should be further experienced in resilience analysis, and in modelling power, water and/or transport systems.
• A solid knowledge of written and spoken English is mandatory, as this is the language for communication at work.
• We are looking for highly motivated and self-driven candidates, with good interpersonal skills and the ability to thrive in a diverse, multidisciplinary environment.
• Please note that salary will commensurate with qualifications and experience.

Information about the application process and contact for applicants

We look forward to receiving your online application including the following documents:

• A letter of motivation
• A CV
• Electronic copies of your educational certificates, and
• Contact details for at least 2 referees.

Applications via email or postal services will not be considered.

For further information about the Future Resilient Systems programme, please visit our website: https://frs.ethz.ch/. Questions regarding the position should be directed to Prof. Giovanni Sansavini by email to [email protected] (no applications).

Duration: 10 months to 1-year contract.

Work location: 1 Create Way, CREATE Tower, Singapore 138602 (NUS University Town)

The Singapore-ETH-Centre is an equal opportunity and family-friendly employer. All candidates will be evaluated on their merits and qualifications, without regards to gender, race, age or religion.

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Prepare meeting materials for production planning such as line-ups, rundowns and location surveys which includes schedule paperwork and camera scripts for Producers.
• Requistion of props and costumes.
• Ensure that all props and costumes are ready for actual filming.
• Manage talents and crew both in Studio and location filming and see to crowd control.
• Prepare production reports.
• Ensure there is continuity of costumes and props during production.
• Follow up on editing such as transfer and logging, dialogue dubbing and transcribing.

• Diploma and Degree graduates or candidates with 2 years of related experience in media are welcome to apply.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focusses on developing the technology and demonstrators for Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave passive and active circuits and subsystems.

Note: a design portfolio showcasing RF designs must be attached to the resume.

Qualifications

• Possess a PhD in Electrical Engineering
• Several years of experience in the simulation and design of microwave circuits and subsystems.
• Experience in the design of LNA, PA, mixer, control circuitry and antennas.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focusses on developing the technology and demonstrators for Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave passive and active circuits and subsystems.

Note: a design portfolio showcasing RF designs must be attached to the resume.

Qualifications

• Possess a Bachelor or Master degree in Electrical Engineering
• Several years of experience in the simulation and design of microwave circuits and subsystems.
• Experience in the design of LNA, PA, mixer, control circuitry and antennas.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.

On behalf of our client who is an Original Equipment Manufacturer (OEM) in the Building Equipment space, we are looking for Mechanical Design Engineers.

Responsibilities

• Provides technical support to projects, Installation on problem verification, report, and coordinates with Group on job site issues and technical solutions related to mechanical design.
• Involving in design interfacing and parts provision among Group of companies.
• Participate in the resolution of design problems related to Error/Trouble investigation, and formulate corrective & preventive measures.
• Provide engineering support to Marketing and Sales staff for new products.
• Provide Maintenance Works Inquiry/Spare Parts Inquiry/Order Supports.
• Any other ad-hoc matters assigned by the Manager

Requirements

• Degree in Mechanical Engineering or diploma with a minimum of 5 years of related experience.
• Proficient in Auto CAD & 3D software is essential

Salary will be offered in accordance with experience and qualification.

Location: East

EA License No. : 22C0971 | EA Reg ID : R21101298

Responsibilities:

• Improve Service Blueprint of retail outlets, identify as well as propose areas for improvements
• Conceptualise concepts and ideas for marketing campaigns on social media and website (Facebook & Instagram)
• Propose social media content, creative photo/ video shoots and schedules
• Produce copywriting, creative photo/video shoot for marketing campaign to boost sales and drive brand awareness
• Propose graphics, animations, gifs or video for marketing collaterals, social media platforms and website
• Competitor analysis and monitoring results of content on social media platforms to identify trends
• Content Creation and Marketing Materials:
• Oversee the creation of compelling marketing content, including product descriptions, videos, and blog posts.
• Develop marketing materials such as brochures, presentations, and promotional materials.

Minimum qualifications:

• Presently enrolled in a full-time Diploma or Bachelor program that is related to either business, marketing or branding
• Proficient in Video, Animation and Graphic editing tools not limited to Adobe Illustrator, Fireworks, InDesign, Premiere Pro and Photoshop is a plus
• Good foundation or high interest in Digital Marketing, Social Marketing, Video editing, Copywriting, Animation and Graphic Editing is a plus
• Be able to complete 6 months of internship with the company
• Ability to speak and write in English and Chinese fluently

Job Description:

• Plan and create content for online channels do not limit to social media, microsite, etc
• Develop pages, posts, and applications to appeal to the target audience
• Conduct in-depth social media research to develop various social media content like graphics, videos, and other forms of content to understand the Management needs
• Obtain input from Management Team to ensure that designs meet organizational standards and brand expectations, express ideas accurately, and represent the company or client appropriately
• Work independently as well as cooperatively with creative team to meet deadlines, stay within budget, and schedule project implementation based on workload, which may include five or more simultaneous projects
• Create a wide range of graphics and layouts for product illustrations, company logos, and websites with software such as photoshop
• Develop concepts by hand or with software, and execute original content by determining the ideal usage of color, text, font style, imagery, and layout
• Examine existing processes, identify flaws, and create solutions that improve design capabilities
• Review final layouts and suggesting improvements when necessary
• Stay up-to-date with new design techniques and software
• Any ad-hoc duties as directed

Job Requirements:

• Candidate must possess at least Diploma in Art / Design / Creative Multimedia / Computer Graphics or equivalent
• Minimum 1 years of relevant working experience, preferably with social media design experience
• Solid knowledge of image editing and digital sketching software, ike Photoshop, Indesign and Adobe Illustrator
• Meticulous, ability to multi-task and work within tight timeline
• Possess positive disposition, independent, resourceful and a team player

• Oversee daily salon operations
• Hire and train beauticians, as needed
• Organize employees’ shifts, considering peak times and seasonality
• Order beauty products, like creams and essential oils and replenish stock
• Arrange for regular maintenance services for all equipment
• Apply hygiene practices across all beauty stations
• Ensure all beauty treatments meet high quality standards
• Maintain staff records, including salaries and working schedules
• Achieve growth and hit sales targets by successfully managing the sales team
• Design and implement a strategic business plan that expands company’s customer base and ensure it’s strong presence
• Own recruiting, objectives setting, coaching and performance monitoring of sales representatives
• Build and promote strong, long-lasting customer relationships by partnering with them and understanding their needs
• Present sales, revenue and expenses reports and realistic forecasts to the management team
• Identify emerging markets and market shifts while being fully aware of new products and competition status

Responsibilities

• Produce all required 2D and detailed drawings for submission, approval and endorsement to authority and/or clients.

• Produce quality rendered 3D colour perspectives using AutoCad / Sketch-Up.

• Familiar with PUB drawings will be an advantage.

• Familiar with all the submissions to authority for building construction projects.

• Responsible to match drawings and measurements to actual installation at the project site.

• To attend site meetings and/or conduct site measurements (if necessary).

• Communicate effectively and work closely with consultants, sub-contractors and project team members.

• Involved in coordination and preparation of specifications to liaise with project managers, engineers and other relevant stakeholders for drawings and submission approval.

• Good communication and design skillset to liaise with clients on their needs and requirements.

Requirements And Skills

• Proven work experience as a Designer, Draftsman or similar role

• Required Skill(s): AutoCAD, Sketch-Up, Excel

• Ability to meet deadlines

• Ability to work independently with responsibility.

Summary: As an Art Director, you will be responsible for work produced on behalf of our clients, as well as any work created for our company, as the need may arise. You are required to collaborate with other creative staff in order to ideate, produce and implement creative that solves our clients' business problems, briefs or goals. You are also expected to maintain our company's standards of creative excellence and, within reason, profitability.

RESPONSIBLITIES

Ideation & Strategic Acumen

• Understand strategy and consumer insights to sell/recommend ideas brave and effective ideas.

• Effectively work on briefs across industries.

• Proactive in bringing new ideas/concepts for the brands/clients they work with

• Constantly striving to deliver disruptive ideas

• Comfortable in communicating and presenting rationale for selling/recommending creative ideas to Creative Directors and Clients

Execution / Production

• Key role in execution/production of multiple projects from concept through to completion, working with both in-house resources and third-party vendors

• Knowledgeable in production, printing, and digital media, and supervise on behalf of the company/clients when necessary.

• Understand strategy and consumer insights, building off these to develop ideas that delivers on clients' business objectives

• Passionate about craft, delivering work of the highest quality

• Deliver work for creative and effectiveness awards at local and international awards competitions

Business Acumen

• Display knowledge of the industry and client's business

• Curious about the business and how it works with an open mind and willingness to learn this side.

People Management

• Collaborate and support the creative process with the Creative Leads and other internal teams to deliver great work

• Key creative contact with integrated teams, engage the team to deliver the best output possible based on the brief.

• Manage and mentor Jr Creatives/interns

Digital

• Constantly up-skilling, proactively keeping up with trends in the creative arena including media formats and knowledgable in incorporate them into creative work

• Up to date with popular culture/trends/technology/practices and know when to adopt/adapt these information effectively to the work

• Capable of working across social and digital assets with good ability

JOB SPECIFICATIONS

Knowledge required

a. 1 - 3 years working experience as a creative.

b. Knowledgeable and understanding of the latest innovations, trends and developments in our industry.

c. A proven track record of previous success, as well as a determination to continue to succeed

Skills required

a. Commercial and creative minded

b. Excellent relationship management

c. Selling and pushing creative standards + delivery

d. Results oriented in business and creativeoutput

Attributes

a. Commitment to TBWA - whatever it takes attitude

b. Team player who is able to work under pressure to deliver and adhere to tight deadlines

c. Pro-active, meticulous and efficiency

d. Ability to work independently

e. Reliability with positive attitude

f. Hungry for more - driving/ striving

g. Exhilarated by change -pushing and thinking about what's next

h. Open to feedback and acts on it accordingly and quickly

i. Disruptive in their thinking and approach to problem solving

Job Scope

Design of RC structure and steel structure

Requirements

Degree in Civil Structural Engineering

Experience in engineering software and AutoCAD would be an advantage.

Pro-active and able to work independently.

Fast learner and able to work as a team.

Please email us [email protected] your CV if interested

Looking for a kind and friendly art teacher for young children.

Able to explore different materials and art styles.

Work in a flexible, fun, and stress-free environment!

Location: Clementi Area

No qualification is required. As long as you are good in art and craft, and creative, you can apply!

Call 97343314 for more details.

Main Duties & Job Scope

Daily Main

Monthly rolling Marketing Plan

Shopping Mall Tied-up

Maintenance of website store

Content Creation

Responsible for ensuring e-commerce platform is generating response and sales target

Monitoring of posts and engagement - boost ad

Liaise with partnered platforms to (new/promotional) products and sell through

Drive customer acquisition, retention and growth through digital marketing

seamless customer experience online

Day to day management of e- commerce clients and members

stay up to date with market, consumers and competitors

collect and connect working knowledge on the e-retailers

supports merchandising team on promotional activities and campaigns (Instore/Online)

Shop window plan and concepts

handle artwork and design of in-house marketing collaterals

liaise with printer and suppliers on project delivery

Submission of artworks for approval - even for marketing materials

Design artworks for social Media support & Simple POP

Need to handle graphic design for product development

Assist to response customers enquiries on FB and IG and online

Liaise with influencers

IG and FB Post

IG and FB shops

Improve display of PM Bisque

Monthly Promotion

-Full-time

-Passion in teaching children/adults on art principles and technique

-Conduct and facilitate teaching and guidance in individual or group settings

-Leading and teaching studio classes, school programmes with outdoor workshops and events

-Oversees our art teacher to ensure effective performance

-Management of Marketing for the studio

-Customer relationship management

-Sales growth of our Art Programmes, to help our business expansion

Job Requirement

- English and Mandarins spoken.

Bilingual abilities are a plus. (To communicate with Mandarin-speaking parents)

- Able to work on weekends with off days on weekday.

-Bachelor's Degree/Master's Degree

-Min 5 years in teaching experience

Brighton College (Singapore) is an exciting place to work, and it is our employees who make our community a vibrant and stimulating environment. The academic success of the Brighton College Family of Schools is due to excellent, innovative and well-planned teaching.

The school is looking to appoint a motivated, creative and energetic Teacher of Art & Music for August 2024.

ABOUT THE ROLE

• To teach according to the timetable for the current year, ensuring that lessons are planned, ordered and effective.
• To be aware of the need to differentiate work and challenges according to the ability of the pupils, whilst maintaining high expectations of all and taking full account of any linguistic or other special needs.
• To work as part of a team, in harmony with and for the furtherance of the College’s ethos and declared educational aims and priorities
• To be supportive of the department’s aims, agreed teaching styles, methods of assessment and other policies.
• To set written assignments or other creative pieces of work that involve a finished product (prep) regularly and mark them promptly and in accordance with College and Departmental policies, ensuring that formative comments are always helpful and make helpful suggestions for further appropriate improvement in learning.
• To provide parents with written reports on their children’s work and progress according to current College policy and to attend parent meetings.
• To take a share of boarding duties, invigilation and cover for absent colleagues
• To be responsible for the supervision, control and proper use of teaching rooms, materials and resources, and to have regard to health and safety issues and regulations.
• To attend InSET, Staff meetings, Key Stage briefings and other meetings that may be called from time to time, as required by the College's Academic Leadership.
• To report in a timely manner any concerns regarding Child Protection or bullying to the appropriate colleague. Be responsible for the pastoral care of the children in the class and ensuring good personal relationships are fostered between the children themselves and with the teacher.
• To take responsibility for one’s continuing professional development and, to this end, to participate in Development and Review procedures as directed by the College's Academic Leadership.
• To contribute to the College’s broad and active co-curricular activities programme.
• Undertake all duties and procedures as specified in staff handbook.
• To be a good role model in respect of speech, dress, behaviour and care of equipment.
• Meet with parents as required and foster good professional relationships and communication with parents, this includes but not limited to attending parents' evenings, school functions, Parent Association events and other evening/weekend events.
• Ensure that the parent portal is kept up-to-date and provides useful links for parents.
• To actively contribute to the Dance, Drama, Art and Music CCA programme.
• To work within an enthusiastic team and help drive the Art and Music teaching in the College to inspire and instill a love of these subject areas in the pupils.
• Attend department meetings and moderation meetings.
• Contribute to the Department’s devising and writing of new subject materials when required.
• This is not an exhaustive list of responsibilities, reasonable request may also be included.

PERSON SPECIFICATION

• Possess 2 to 6 years of teaching experience with a university degree and teaching qualification.
• Experience of teaching Art and Music lessons to the whole primary age range and EYFS.
• Have knowledge of National Curriculum requirements for Art and Music at the relevant Key Stages, and of writing lesson plans, developing resources and assessing students' work.
• Proven record of teaching experience, prior experience in independent Prep School will be an added advantage.

SAFEGUARDING AND EQUAL OPPORTUNITIES

Brighton College is committed to safeguarding and promoting the welfare of children and young people and expects all staff and volunteers to share this commitment. Any offer of employment will be subject to an enhanced DBS disclosure, / international Police checks, the receipt of satisfactory references, the College’s pre-employment medical question, relevant original ID documentation and examination certificates. The College understands that a robust, fair and transparent recruitment and selection policy plays a central role in achieving this aim.

The College is committed to ensuring that the recruitment and selection of staff is conducted in a manner that is systematic, efficient and effective and promotes equality of opportunity.

The College reserves the right to appoint a candidate to the role in advance of any deadline date, in the event that a suitable candidate can be appointed.

© Brighton College (Singapore) Pte Ltd

CPE Registration Number: 201904884D

Summary:

As a Production Operator, you will be a crucial member of our printing team, responsible for ensuring the seamless execution of various tasks in the production process. Your attention to detail, adaptability in a fast-paced environment, and ability to collaborate within a team will play a pivotal role in the success of our printing operations. You will have the unique opportunity to witness the transformation of a traditional production and printing business into a cutting-edge and efficient production plant, at the forefront of innovation.

Job Scope:

• Support print production runs through the operation of offset printing machinery
• Preparation of papers prior to printing.
• Laminating, binding, and finishing operations.
• Engage in craft-related tasks such as pasting, sticking, folding, and other manual finishing processes (e.g. folding, scoreline, perforation, collation, lamination & packaging)
• Finishing Techniques: Execute folding, creasing, scoreline, and perforation processes with precision.
• Strict adherence to safety protocols and guidelines.
• Perform simple troubleshooting to rectify minor printing faults and contribute to the maintenance of printing machinery.

Requirements:

• Past experience in production-related works within the printing industry.
• Proficient in operating printing equipment/machinery.
• Knowledge of finishing techniques.
• Attention to detail in craft-related tasks (pasting, sticking, folding).
• Team player
• Able to handle physical work and willing to work overtime during peak periods.
• Ability to work in a fast-paced environment.
• Adherence to safety protocols and guidelines.

About the company: AFL manufactures industry-leading fiber optic cable, connectivity and accessories and provides engineering and installation services for some of the largest telecom customers in the world. Our company was founded in 1984 with a single fiber optic cable and today, we manufacture thousands of products, generate an excess of $1B in revenue, and employ more than 5,800 associates worldwide. At AFL, we recognize that our employees are our greatest asset. We hire and train each individual, investing in them to ensure success in their careers. With a commitment to professional development and growth, let us connect you to your next career opportunity.

Job Summary: As a Design Engineer (Mechanical), you will be responsible for end-to-end mechanical engineering work for our AFL line of Fiber-Optic telecommunication products (e.g. cable harness and assemblies, connectors, panels, cabinets and accessories). The work-scope includes early-stage/front-end development, product design, check & optimization, integration, industrialization, life-cycle management/sustaining engineering etc.

Key Responsibilities:

• Mechanical design and development of product functions and modules to meet user and business requirements, compliance, quality and cost.
• Collaborate with various stakeholders such as Quality, Product Management, Solution Engineering, Manufacturing, Supply Chain functions as well as End-user/Customers etc.
• Translate “up-stream” user/system requirements as well as applicable industry standards (e.g. IEC, EN, GR) into measurable “down-stream” technical design requirements
• Support Commercial/Sales team through generation of concept designs and presentations for pitch to customers
• Create product intellectual property and patent submissions
• Create test & verification plans for the developed/designed elements and parts
• Interface with manufacturing team and/or external suppliers for new product industrialization
• Support Quality incidents and lead effort in failure analysis/troubleshooting
• Develop solution in support of manufacturing & quality improvement
• Generate documentation, including engineering reports, BOM, technical drawings, design specifications, installation guides for users etc.

Main Requirements:

• 3-5 years of work experience in product engineering design/development and transfer to manufacturing
• Bachelor’s in Engineering (Diploma in engineering with at least 7 years’ experience in product engineering design may be considered)
• Conversant in both English & Mandarin (spoken and written)
• Proficient in CAD Software for 2D drawing and 3D Model application (Solidworks preferred)
• Familiar with Product & CAD Lifecycle Management workflow processes and tools (e.g. Solidworks PDM, PTC Windchill etc..)
• Conversant with Geometric Dimensioning and Tolerancing (GD&T) standards (e.g. ASME Y14.5)
• Knowledge and competence in stack tolerancing, mechanical design analysis and validation based on theoretical calculation (e.g. stress and deformation)
• Knowledge of common industrial plastics, as well as experience in designing parts for plastic injection molding
• Knowledge of common industrial metals, as well as experience in designing parts for using standard metal fabrication & forming processes (e.g. CNC machining, sheet metal deep-drawing & stamping)
• Knowledge in Design for Manufacturing and Assembly (DFM/DFA)
• Experience in the following areas will be added advantage: (1) Data-center, or Fiber-Optic telecommunication Cable industry, (2) Design of connectors, cable harness and assemblies, (3) Failure Mode Effect Analysis (FMEA), (4) Knowledge of statistical methods and Six-Sigma techniques (e.g. DOE, GR&R, SPC, Cpk analysis), (5) Finite Element simulation tools (e.g. Solidworks Simulation, ANSYS Mechanical)

Other Important Notes:

• This role is based in Singapore AFL office
• Candidate is expected to be an independent and pro-active self-starter (e.g. taking initiatives to drive new or improve current way-of-working/processes)
• Candidate will be working with a global team (i.e. North and South America, Europe, UK, APAC)
• As this role requires frequent interactions with international customer and counterparts, candidate must be able to accommodate to work calls and meetings outside normal office hours (due to time-zone differences)
• International travel may be required (up to 20% of the time)

Cognita Schools are committed to safeguarding and promoting the welfare of children and young people and expects all staff, volunteers and other third parties to share this commitment. Safer recruitment practice and pre-employment background checks will be undertaken before any appointment is confirmed.

An exciting opportunity for a Secondary Art Teacher has opened in AIS. If you are someone who is driven in making a positive difference and with passion for growth and development, this role is meant for you!

Position Requirements:

• IBDP/IGCSE and/or HSC experience preferred, but not essential
• Experience in an International School environment would be a distinct advantage
• Excellent communication skills, multi-tasking and time management
• Ability to work as a part of a team and an interest in participating in the wider school community

Qualifications:

• A minimum four year recognised teaching qualification including a Bachelor’s Degree and Postgraduate Teaching Diploma/University Qualification or a Bachelor of Education
• A minimum of 3 years Full Time teaching experience in a recognised educational institution ideal, however graduates may be considered

Note: this salary range is for Step 8 to 15

Further information about this position is available in the job description found in the AIS website at https://www.ais.com.sg/work-for-us-positions-vacant/

Applicants are required to read the job description for the role prior to applying and submit a cover letter, curriculum vitae and a duly completed copy of the School's Job Application Form (downloadable from the school's website) to the email address: [email protected]. Kindly ensure that the position title is clearly specified in the job application form.

Only applications submitted using the school's job application form will be considered.

Roles & Responsibilities

• Handle full scope of QS duties which includes material take-off and variations.
• Provide estimating cost and implement Contract administration for renovation projects.
• Coordinate with project team for the cost estimation for any additional works.
• Ensure proper documentation of records concerning variation.
• Submit accurate cost and time implications to client.

Requirements

• Experience within a Design & Build or similar working environment as a Quantity Surveyor
• Preferably specialized in Interior Design or equivalent
• Candidate must possess at least Diploma in Quantity Surveying
• Previous experience of delivering projects with an understanding of challengers faced in terms of skill in time, cost and quality control and how to overcome them and exceed expectations
• Knowledge in MS Office including Microsoft Project, Excel, Word and Power Point
• Able to communicate in English and Mandarin is a must (To liaise with Mandarin speaking associates)