Responsibilities

• Responsible for physical design and development activities of MediaTek Ghz, AI processors and neural network DSP
• Involve in activities encompass physical design and analysis of complex and timing-critical AI processors and neural network DSP
  Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing, power optimization and physical verification
• Work closely with MediaTek colleagues in Taiwan and Singapore in implementation methodology co-development and flow deployment

Requirement

• Bachelor/Masters Degree in Electrical/Computer Engineering
• Min 2 years of high-speed CPU/GPU/DSP Subsystem RTL Integration experience or IP/Block/SoC Design experience (Candidate with less than 5 years of relevant experience will be considered for junior position)
• Experience with Synopsys ICC (preferred) or Cadence tools from netlists to GDS
• Experience in graphics processor implementation/power reduction flows and methodology from RTL to GDS (including synthesis, floor-planning, placement, CTS, routing, timing optimization, physical verification)
• Knowledge of high-speed/low power IP and custom circuit design
• Experience with power noise and reliability tools such as Redhawk and Voltus
• Good communication and scripting skills

We are looking for a candidate for high-speed analog integrated circuit design. This candidate will contribute to the development of high linearity silicon photonics modulators for 6G and beyond communication systems. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications
• Design and tapeout ICs which include state-of-the-art circuit blocks, e.g. wideband linear low-noise amplifier and transimpedance amplifier with a focus on circuits interfacing with silicon photonics elements
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electronic Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Architecture invites applications for two Tenure Track Assistant Professor positions in Architectural Design.

The Department of Architecture in the College of Design and Engineering is ranked among the top 10 in the world, and Asia’s best in Architecture/Built Environment, by the Quacquarelli Symonds (QS) World University Rankings (2023). It offers the professionally accredited Master of Architecture programme as well as a range of graduate and undergraduate programmes in related fields such as urban planning/design, landscape architecture and conservation. The faculty is correspondingly diverse and international. The Department offers internationally competitive remuneration, generous employment benefits as well as access to research funding for both junior and senior academics. International applicants will also receive subsidized housing at Kent Vale.

Qualifications

Research by Design (RxD) at the Department of Architecture seeks qualified, interdisciplinary, and inspirational candidates with expertise in creative practice research (research through design, as opposed to research for design or research about design). We seek candidates with expertise in design with foundations in decarbonized & planet-positive futures, warming world futures, social justice, and inclusive futures, with a particular focus on being situated in the tropical geographies of Southeast Asia and the equator. Candidate research should be manifested through a robust portfolio of creative practice outputs and substantiated through forms of peer review and public and societal engagement, with evidence of leading with anticipatory and future-forward design ideas that impact evolving society and the profession. We are especially interested in candidates who are leaders in Research by Design methods in the academy and who leverage creative practice to imagine and manifest a more just world.

Successful candidates are expected to teach and lead design studio courses related to research by design, with core, elective, and seminar courses to complement the design studio.

All qualified individuals are encouraged to apply. To apply, please provide the required documents in pdf and indicate which position you are applying for by 15 April 2024. Applications after that date may be accepted if positions are still available. Expected start date of the appointment is end of 2024 or early 2025.

1. A letter of interest
2. A complete Curriculum Vitae
3. A Statement of Teaching (maximum two pages)
4. A Statement of Research (maximum three pages) and a writing sample
5. Names of four referees with contact details (who will be contacted only if shortlisted). Please highlight any who is a member of your PhD dissertation committee.
6. Portfolio of work showing research through design

In accordance with the Personal Data Protection Act (PDPA), please provide consent for the collection, use and disclosure of personal data, using the NUS Personal Data Consent for Job Applicants form.

Responsibilities :

• Responsible for the design and development of analog building blocks, including amplifiers, integrators, switched capacitor circuits, regulators, bandgap circuits, Delta-Sigma ADCs, SAR ADCs, filters and control logics etc.
• Responsible for top-level integration of high performance mixed signal chips including analog front end signal acquisition and conditioning chips and analog front end battery monitor chips etc.
• Work with digital team to define register maps, control logics, digital filters for analog front end chips or mixed signal SOCs etc.
• Conduct periodic design reviews.
• Support test development and product development teams in bringing projects to production.

Requirements:

• Degree/Master/PHD in Electrical Engineering or Microelectronics with excellent technical background in analog /Mixed-Signal design.
• With interest in IC design welcomed.
• With experience in analog IC design preferred.
• Salary will be offered base on working experience

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

2D Art Intern

Founded in 2006, IGG is a leading global mobile games developer and publisher committed to making amazing innovative games for players all over the world. Our games are available in 23 different languages, and are enjoyed by 38 million monthly active users from over 200 countries and regions.

At IGG, we are innovators at work, gamers at heart.

We are currently looking for a 2D Art Intern to join our energetic team in Singapore!

Job Description:

Producing character and environment concept art

Ability to turn concept art into illustrations

Working closely with senior artists / art leads to achieve visual quality

Job Requirements:

Portfolio should demonstrate stylized characters, environments and/or props in stylized cartoons(Pixar/Disney, Clash of Clans, Warcraft, League of Legends, Candy Crush)

Has a good eye for cute illustrations

Bonus if portfolio can present UI icons

Familiar with Photoshop and/or Clip Studio Paint, other 2D softwares

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Our Art Directors are visual storytellers. They create visual languages that make hearts skip a beat. They harness the beauty of design to get brands into places no one else can. Their art induces change, inspires action and invokes advocacy. Problem solvers, our Art Directors collaborate with our copywriters, strategists, media planners, technologists and public relations experts to champion unforgettable experiences through-the-line.

Qualifications

· Through-the-line advertising experience

· Strong understanding of digital and social platforms

· Great design skills, including layout, typography, video, design

· Ability to manage multiple projects at one time to meet deadlines

· High level of proficiency in Photoshop and Illustrator

Our Art Directors are visual storytellers. They create visual languages that make hearts skip a beat. They harness the beauty of design to get brands into places no one else can. Their art induces change, inspires action and invokes advocacy. Problem solvers, our Art Directors collaborate with our copywriters, strategists, media planners, technologists and public relations experts to champion unforgettable experiences through-the-line.

Qualifications

· Through-the-line advertising experience

· Strong understanding of digital and social platforms

· Great design skills, including layout, typography, video, design

· Ability to manage multiple projects at one time to meet deadlines

· High level of proficiency in Photoshop and Illustrator

Responsibilities:

Work in a fast-pace dynamic environment developing complex semiconductor equipment. This is a collaborative, multidisciplinary group focused on designing groundbreaking metrology products. Design state of the art mechanical sub-systems and perform first-principal analysis for sizing components. Release complete documentation package and work with the new product group to generate the necessary documentation.

Desired skills and expertise:

• Deep understanding of mechanics and physics
• Proficiency in CAD software, preferably CREO
• Deep understanding and proven expertise in Finite Element Analysis is required (Ansys/COMSOL), especially in structural, thermal, vibration and air flow analysis
• Good knowledge of GD&T in both part and assembly level
• Familiarity with manufacturing processes such as machining, welding, sheet metal forming and 3D printing
• Knowledge of precision machine design is an advantage
• Good communication and interpersonal skill, ability to collaborate with counterparties with diverse background
• Proficiency in both oral and written English

Minimum Qualifications:

• Doctorate (Academic) Degree and related work experience of 3 years; Master's Level Degree and related work experience of 6 years; Bachelor's Level Degree and related work experience of 8 years

KLA Singapore is seeking an outstanding System Design Engineer with physics/engineering background, to join the hardware and systems engineering team for design and develop state-of-the-art optical metrology system for semiconductor industry. As a key member of a multidisciplinary R&D team, the successful candidate will be expected to understand system-level function, performance & requirements, work closely with different parties, to support the business priorities and product development roadmap.

The job duties of System Design Engineer include but not limit to:

• Design, assembly, test, analysis, and characterization of optical systems, especially interferometry, illumination, and sensing systems.
• Conduct optical system architecture analysis.
• Conduct system error budget and specs allocation to each subsystem.
• Lead product prototype integration and its performance characterization.
• Develop and test on algorithms of interferometric data processing and image processing.
• Drive innovation in related fields such as optics and algorithm. Explore feasibility to adapt other technologies such as machine learning and data science.
• Document design, testing and diagnosis procedures to transfer the design to manufacturing.
• Support manufacturing and field service team on system/optics related escalations.

Requirements:

• Competence and passion in building advanced optical instruments (interferometer/microscopy/spectroscopy)or other scientific instruments, with comprehensive understanding in its physics.
• Solid knowledge of geometry and wave optics.
• Proficiency in common programing language for data analysis or modeling, such as Python/Matlab/C.
• Experienced in product prototyping: experiment design, test bench setup, error budget analysis.
• Systematic thinking with good sense of statistics.
• Good communication and collaboration, comfortable in working with multidisciplinary team and different functions.
• Good perseverance.
• PhD in relevant science or engineering fields. Preferably PhD
• Experience in optical system design is a plus.
• Experience in laser/camera qualification and characterization is a plus.

Minimum Qualifications:

• Doctorate (Academic) Degree and related work experience of 4 years

We're looking for a Freelance Art Facilitator to support inclusive art sessions for a small group of 2 - 4 special students with Mild Autism Spectrum Disorders (ASD) to design simple marketing collaterals on canva.com together with an on-site School Vocational Coach.

This role's commitment is once a week on either Tuesday or Thursday 9.00 am to 4.00 pm with an hour lunch break.

This role supports equipping these unique individuals with real-life work situations for their careers with experience and improving their interpersonal and communication skills.

Responsibilities:

1. Facilitate weekly Canva.com design sessions for 2 - 4 special students.
   
2. Offer individual help together with a Vocational Coach for a positive learning experience.
   
3. Communicate with learners and share to encourage them and facilitate them on how to improve their canva.com designs
   
4. Time Commitment: Once a week on either Tuesday or Thursday, 9.00 am to 4.00 pm with an hour lunch break.
   
5. Keep simple records and share progress updates on the students with the company
   

Qualifications:

• Experience in art
• Have compassion to support individuals with autism to develop a career
• Familiarity with Canva.com.
• Good communication skills.

Location: A School located at West Coast, Clementi Area.

To start - 6 February onwards.

. JOB DESCRIPTION

Job Title

Carpentry production manager

Occupation

Supervisor and General Foreman (Furniture and Related Products Manufacturing)

Job Description & Requirements

Roles & Responsibilities

Must have at least 5 years experience

Must follow instruction and hard working and cooperative

Liaising with clients, suppliers and other construction professionals

Reading blueprints and designs to work to specifications prepared by other construction professionals, architects and building code recommendations

Starting from cutting and paste to build and install the finished carpentry work at the project site.

Good knowledge with the materials.

Good understanding of the drawings.

Good time management and teamwork spirits.

We are an equal-opportunity employer and value diversity among our teachers, staff and students.

At One World International School (OWIS), we are looking for passionate, adaptable educators who enjoy teaching students from diverse cultures. OWIS provides an individualised approach to learning that nurtures every aspect of child development. In addition to versatile learning spaces and a variety of extracurricular activities, we offer rigorous curricula that prepare students to be future innovators and leaders.

We are an IB Primary Years Programme (PYP) World School, a Cambridge International School and an IBDP School. All teaching positions require a high proficiency in spoken and written English, a degree, teaching qualifications and ICT literacy.

Newly-qualified Teachers are welcome to apply!

One World International School is committed to safeguarding and promoting the welfare of the children. We are committed to recruiting candidates who share this commitment to safeguarding. Before an offer is given, candidates will undergo child protection screening and will be required to provide a Police Verification Check from their country of residence.

If you are looking to work with enthusiastic students from around the world and become part of our dynamic school community, we invite you to submit your application for the following position.

Overall Responsibilities:

• Support the main classroom teacher in the implementation of daily programs to facilitate learning.
• Work with groups of students under the teacher’s direct supervision.
• Supervise the playing of educational games.
• Work with students who have varying degrees of learning support needs.
• Ensure that students adhere to the school’s behaviour policy.
• Prepare work and activities in accordance with the objectives set by the teacher.
• Assist the teacher in helping with the student’s physical needs, whilst also encouraging independence.
• Responsible for the upkeep of teaching resources, prepare art and craft materials, arrangement, appearance, decorations, and learning environment of the classroom
• Use positive discipline techniques at all times.
• Maintain and build relationships with children and parents.
• Being part of the team, you will participate in parents and community engagement activities.
• Give feedback to teachers on students’ progress.
• Any other related duties as requested by the Head of School.

Requirements:

• Be a passionate educator with the ability to deliver inquiry based learning.
• Creative and inspiring with loving energyDiploma/Certificate in Early Childhood.
• Care and Education preferred
• Prior experience in a classroom environment preferred.

Work Location: Punggol Campus

. JOB DESCRIPTION

Job Title

Carpentry production manager

Occupation

Supervisor and General Foreman (Furniture and Related Products Manufacturing)

Job Description & Requirements

Roles & Responsibilities

Must have at least 5 years experience

Must follow instruction and hard working and cooperative

Liaising with clients, suppliers and other construction professionals

Reading blueprints and designs to work to specifications prepared by other construction professionals, architects and building code recommendations

Starting from cutting and paste to build and install the finished carpentry work at the project site.

Good knowledge with the materials.

Good understanding of the drawings.

Good time management and teamwork spirits.

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 3 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 3 years of ASIC design.
• experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.