What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Minimum with 7 years relevant experience
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.

In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will have the opportunity to develop unconventional ultrasound transducer drivers, receiver circuits for IoT and biomedical applications as well as cutting-edge high-speed analog circuits for advanced optical communication.

Role & Responsibilities

• Design and tapeout circuit blocks e.g. high linearity low-noise amplifier, variable gain amplifier, envelop detector, and high voltage driver for MEMS ultrasound transducers.
• Work together with team on system integration and demonstration.
• Work together with team to investigate novel circuit/system solutions to create new inventions.

Requirements

• Master’s / PhD degree in Electrical Engineering or equivalent
• Minimum 2 years of transistor-level analog circuit design experience
• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Design experience with high voltage BCD process would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

Job Description

• Working on 6nm and below advanced process project APR and Timing/PI sign-off
• Take the TOP and PM role for the complicated hierarchical chip (more than 20M inst plus 500+ macros)
• Take the Block or Block coordinator role for complex blocks
• Do early prediction for critical APR/Timing/PI issues

Job Requirements

• APR/Timing/PI hands-on/tapeout experience on complicated hierarchical chip
• With min. 8 years relevant experience
• TCL/Perl/Python/C/C++ programming skill
• Have advanced process(n6 or below) experience is a plus
• Excellent communication and team work spirit

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

HEAD OF DESIGN (EVENT)

Company background: One of Singapore's established event management company specializing in conceptualisation, production and management of small to large-scale events, conferences and exhibitions.

Location: Central (Bukit Merah)

Working Hours: 5 Days Work Week, Mon to Fri (10am to 6.30pm)

Remuneration Package:

• Basic up to S$ 8000
• AWS
• Project Incentive
• Profit Sharing

Job Responsibilities:

• Drive innovative design concepts and themes for luxury and lifestyle events and exhibitions
• Design and produce creative 3D renderings, highly detailed layout plans, elevation drawings and technical drawings
• Lead and inspire a team of designers and oversee the design workflow for events and branded exhibitions (3D renderings, layouts, technical drawings and shop drawings)
• Projects allocation for the design team to ensure efficient turnaround
• Work closely with account servicing team and production team in ensuring design aligns with client’s requirements, and ensuring budget alignment for designs
• Communicate closely with vendors and contractors
• Attend site visits and inspections to assess venue requirements and develop spatial layouts and designs that optimize the attendee experience
• Able to manage personal workload, delegate tasks to design team effectively, prioritize team workloads, and oversee project timeline to ensure timely delivery of design deliverables
• Managing workflow with external freelancers when specialized skills or additional resources are needed

Requirements:

• Bachelor’s or Master’s Degree in Interior Design, Exhibition Design, or a related field
• Minimum 7 years of experience in lifestyle, luxury, fashion, or experiential event design
• Advanced skills in spatial planning, 3D modelling, and visualization, with expertise in photorealistic rendering techniques
• Proven track record in leading and managing creative teams; strong leadership and mentorship abilities
• Good understanding of clients’ brand strategy and design alignment for luxury and lifestyle brands
• Excellent communication and presentation skills
• Proficiency in 3ds Max, Adobe Creative Cloud software, SketchUp, and AutoCAD

Please be notified that only shortlisted candidates will be notified.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Engineer - Analog / RF Design [Radio System Solutions]

Job Description:

• Design of RF/Analog/Mixed-signal IC circuit blocks / IPs based on specifications (performance, area, power consumption).
• Realize IC layout with floor planning and performance considerations (with layout engineers).
• Testing & Debugging of IC prototypes (with system verification engineers).
• Support of IC to mass production ready.
• Continual support / debug of field related issues or customer IC rejects.
• IC design and performance documentation.

Requirement

• Bachelor's Degree / Master’s Degree in EEE (major in IC Design).
• Knowledge of RF/analog designs through final year project and internship are an added advantage.
• Training will be provided.

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the team

Radio System Solutions Division develops standalone RF-IC or IPs for wireless communication products within MediaTek. This involves designing and verification of building blocks such as low-noise amplifiers, power amplifiers, filters, data-converters, phase-locked loops, low-dropout regulators and digital calibration circuits in advanced semiconductor processes. We are looking for a passionate talent who always up for challenges to join us for this exciting career journey!

In MediaTek, we believe technology changes lives and a changed life can change the world.

Joint us - Tomorrow built by you.

Mission statement:

Lead the engineering execution of medium-size projects and ensure that all related activities are performed in accordance with Hitachi Energy policy, contractual agreements, quality standards, health, safety & environment requirements. Responsible for day-to-day designing and engineering activities aligned with schedule commitments. He / She is to possess technical knowledge and skills relating to the design of various transmission substation/Industry components, systems and equipment. To provide technical guidance to his/her project team and lead project engineering discussion.

Your responsibilities:

• You will design system while adhering to design and engineering principles of transmission substation/Industry, incorporate equipment, system, and safety features in design plans, comply with local and national safety standard and ethics that come with the design engineer role.
• You will maintain records and documents of all the work and design in accordance with unit and customer requirement.
• You will work in within the proposed schedule and budget for the project and liaise with project stakeholders with status update to them regarding the status of the work.
• You will coordinate mechanical and electrical tests on design, if required, conduct tests on equipment against fundamental design.
• You will manage department's compliance with organization’s risk management framework, review design drawings for practicability, completion timeframe and research capabilities.
• You will assist in development engineering resource planning strategy, coordinate with factory and supplier to ensure the design meet with the requirement, prepare design related calculation and issue bill of material·
• Living Hitachi Energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.

Your background:

• You hold Electrical Engineering degree or equivalent.
• Preferably with 3 years’ experiences in Electrical/Transmission Industry.
• Experience and proficient knowledge and skills in BIM - Autodesk REVIT (3D model)
• Experience in switchgear planning, design and bidding related tasks.
• Good knowledge of substations equipment, protection relays and network automation.
• Knowledge of Electrical/Transmission Utilities Industry is preferred.
• Proficiency in English language.

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• Bachelor/master’s degree in Electrical/Electronic Engineering / Computer Science or equivalent
• With minimum 4 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms
• Strong communication skills, problem solving and analytical skills
• Candidate with more years of experience will be considered for a more Senior role.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Art Teacher (Full-time / Part-time)

The HEart of our studio lies in our dedication towards delivering a holistic art programme, with a focus towards the engagement with the children and their learning experiences. The team is made up of nothing less than energetic individuals who are passionate for arts and teaching.

Heart Studio will be prioritizing applicants who have a current right to work in Singapore , and do not require Heart Studio’s sponsorship of a visa.

Main Responsibilities

- Create and conduct lessons for all curriculum and workshops according to HEart studio standards

- Teach Fine Art to children ( Sketching, painting and sculpture) in an engaging and creative manner

- Develop and prepare lessons plan and art related programs.

- Good communication skills to be able to engage and communicate effectively with parents , students and fellow teachers

- Demonstrate and assist students to use different techniques of art work aligned to their artistic abilities.

- Teach students to apply elements of design and modern principles of art

- Able to handle students of different age group

- Create a conductive environment to enhance learning

- Plan, coordinate Adhoc studio programs and events

- Effectively guide the students as per studio’s curriculum / lesson plan while tracking progress and providing timely feedback.

- Maintain studio cleanliness , housekeeping

Requirements:

• At least a Diploma/Degree in Fine Arts, Design or related fields
• 1-3 years of experience in teaching fine art to students in studio / pre school or equivalent capacity.
• Equipped with knowledge of painting and drawing
• Strong interpersonal skills and able to interact with all levels
• Enjoys working with children age 3 years to 17 years.
• Has patience and cares for children, comfortable communication with parents
• Keen for knowledge
• Strong foundation in classroom management
• Handles and communicate effectively with children and parents
• Independent, resourceful, self-motivated with initiative
• Honest, responsible and positive
• Proven track record and portfolio
• Able to work over weekends
• Competitive salary
• Part timers are welcome to apply

Working hours:

- Wed to Fri: 11am to 8.45pm

- Saturday: 9.30am to 6pm

- Sunday: 9.30am to 4.30pm

What Are We Offering :

· Competitive Salary

· On- the-job training & a great working environment.

If you are passionate about art education and possess the skills and qualities we are looking for, we would love to hear from you. This is an opportunity to be a part of an organization that values creativity, education and happiness.

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:

As a SoC Design Verification Engineer, you will be you would be part of a passionate team developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C co-simulation, to mixed-signal simulation and formal verification. You will be part of the Singapore team in developing high performance MCU chips.

• Develop detailed verification plans based on design specifications and architectural requirements.
• Create and maintain test benches for complex digital designs using System Verilog and UVM (Universal Verification Methodology).
• Write, debug, and execute test cases to verify functionality, performance, and power consumption of our SoC products.
• Collaborate with design engineers to identify, analyze, and resolve design issues.
• Conduct coverage analysis and drive verification closure to ensure all functional requirements are met.
• Mentor junior verification engineers, providing technical guidance and support.
• Continuously improve verification processes and methodologies to enhance efficiency and effectiveness.
• Participate in design and verification reviews, providing constructive feedback and recommendations.
• Stay updated with the latest industry trends and advancements in verification techniques and tools.

Your Skills and Experiences:

• Education：Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Experience: 5 years+ prior industry experience of design verification including significant System Verilog and UVM usage.
• Technical skills:

-Deep knowledge of digital logic design, SOC architecture and microarchitecture

- Proficient in simulation-based verification methodologies and languages such as UVM and System Verilog

- Skilled in developing and maintaining test benches, test cases, and verification environments

- Experience across the full verification cycle from initial planning to final tape out

• Preferred skills:

- Knowledge of low-power design techniques and verification methodologies.

- Knowledge of hardware-software co-simulation mixed-signal verification techniques.

- Knowledge of gate level simulation methodologies.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

At Cheil, we are passionate about ideas that move.

We believe that the right idea will move seamlessly across channels: from online to offline, above the line to below the line, in-store to out-of-home. It will move brands, move products and most importantly, move people. The right idea will move everything forward.

Established in 1973 with headquarters in Seoul, South Korea, Cheil Worldwide is one of the world’s leading integrated marketing communications networks, with more than 7,200 employees globally in more than 54 offices in 46 countries.

For more information, visit us at: www.cheil.com.

We are inviting candidates for the position of:

Content Publishing / Graphic Design Intern (Full-time internship)

Job description

Working with the Samsung Electronics SEA & Oceania business, you will have the privilege of working within a big data environment where strategic decisions are made, guiding best in class upholding brand compliance.

• Content Audit & Analysis: Work closely with the Content Team to conduct content audits on Samsung.com to ensure content is brand compliant and aligns with our strategic objectives.

• Progress Tracking & Reporting: Analyse, track, and report progress on weekly and monthly reports for multi-market operations, providing insights and recommendations for optimization.

• Training Document Management: Prepare and maintain training documents, Standard Operating Procedures (SOPs), and any other necessary documents to support team operations and knowledge transfer.

• Assist in Design Projects: Execute simple design tasks such as key visual adaptations for regional campaigns, ensuring alignment with brand guidelines and creative direction.

• Asset Management: Organize and maintain digital assets, including images, graphics, and other design elements, to facilitate efficient workflow and collaboration within the team.

Desired Skills and Experience

• Good skill in Excel and PPT

• Good skill in Adobe Illustrator and Photoshop

• Pursuing or recently completed a degree in Graphic Design, Visual Communication, or a related field.

• Analytical and quantitative, with strong attention to detail

• Self-starter with excellent communication and collaboration skills, with the ability to work effectively in a team environment.

• Ability to thrive in a fast-paced, ambiguous, interruptive environment

• Ability to work independently as well as work collaboratively toward a common goal

Roles and Responsibilities:

• TCAD modeling, simulation, and innovative design of high power electronics devices, as well as device characterization.
• Develop and simulate high power SiC MOSFETs (planar, trench, Super-Junction MOSFET, IGBT) with a blocking voltage exceeding 1.2K using the industry-standard Synopsys/Silvaco simulator.
• Create and simulate practical & efficient junction terminations.
• Model transport and carrier scattering in devices operating under extreme ambient conditions.
• Serve as a valuable resource for colleagues with lesser TCAD power electronics experience and take lead in group projects with managing risks & resource requirements.
• Foster close collaborations with both internal and external customers to fully understand customer issues and requirements.

Job Requirements:

• PhD Degree in Electrical Engineering or related field.
• >2-3 years industrial experience for high power devices design and modeling.
• Thorough understanding of different types of high-voltage, high-power MOSFETs including Planar, Trench, Super-Junction MOSFETs, and IGBTs, with a focus on design and device characterizations.
• Hands-on skill in designing MOSFET/diode layouts.
• Excellent communication skills to effectively engage with customers, address their needs, resolve issues, and meet demands.

Job Responsibilities:

• Schematic capture, optimization and simulation.
• Develop efficient circuit designs and digital STD cell library meeting performance, power and area target.
• Study and invent new digital STD cell circuit architecture.
• Work with a layout designer to implement the layout of circuit.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power analog design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

Roles and Responsibilities:

• TCAD modeling, simulation, and innovative design of high power electronics devices, as well as device characterization.
• Develop and simulate high power SiC MOSFETs (planar, trench, Super-Junction MOSFET, IGBT) with a blocking voltage exceeding 1.2K using the industry-standard Synopsys/Silvaco simulator.
• Create and simulate practical & efficient junction terminations.
• Model transport and carrier scattering in devices operating under extreme ambient conditions.
• Serve as a valuable resource for colleagues with lesser TCAD power electronics experience and take lead in group projects with managing risks & resource requirements.
• Foster close collaborations with both internal and external customers to fully understand customer issues and requirements.

Job Requirements:

• PhD Degree in Electrical Engineering or related field.
• >2-3 years industrial experience for high power devices design and modeling.
• Thorough understanding of different types of high-voltage, high-power MOSFETs including Planar, Trench, Super-Junction MOSFETs, and IGBTs, with a focus on design and device characterizations.
• Hands-on skill in designing MOSFET/diode layouts.
• Excellent communication skills to effectively engage with customers, address their needs, resolve issues, and meet demands.

Summary:

• Basic up to 6k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

Summary:

• Basic up to 6k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

As part of IME Integrated Circuit Design and System Department, we are looking for a candidate with relevant experience in ultrasound imaging system design. This candidate will define an ultrasound transducer array beamformer IC architecture for imaging applications. The candidate will work closely with MEMS team on system architecture, circuit design, simulation, validation, and integration.

Role & Responsibilities

• Perform system-level beamformer architecture, design, and simulation, to derive circuit-level design specifications.
• Beamforming array optimization using AI algorithms.
• Design and implementation of beamformer algorithm in hardware.
• Work together with team to investigate novel circuit/system solutions to create new inventions.

Requirements

• Master’s / PhD degree in Electrical Engineering or equivalent
• Good understanding of ultrasound imaging systems and beamforming theories.
• Knowledge of AI algorithms and implementation will be a plus
• Familiar with IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Company Summary

They specialize in comprehensive commercial outfitting, offering a wide range of services tailored to meet the needs of valued clients. Their service offering spans the entire project lifecycle, from initial design consultancy to project management and final interior fit-out. The portfolio includes retail and F&B stores, show galleries, offices, industrial and general contracting.

Location: Potong Pasir

Work Week: 5 days (9am - 6pm)

Key Responsibilities:

• To prepare tender bids for submission
• Documenting any changes in design and updating budgets
• Review and understand all drawings and specifications
• Monitor project costs to ensure objectives of the project are achieved in accordance with company standards and building contract law
• Responsible for coordination with contractors, suppliers, and other parties
• Handle pre or post-tender procurement which includes sourcing and negotiating with suppliers
• Tabulate and evaluate price comparison and prepare cost analysis / cost reduction strategies to enhance overall project value
• Handle project administration and documentation, including preparation of sub-contract, Variation Orders, etc
• Other related duties assigned by the manager

Requirements:

• Min 1 year experience in ID field
• Experience in full interior fit-out projects

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845