Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 5 years of ASIC design experience preferred.
• Familiar with ASIC design flow
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting
• A team player with good communication skills
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 8 years of ASIC design experience preferred.
• Familiar with ASIC design flow
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting
• A team player with good communication skills
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

We are looking for a candidate for high-speed analog and mixed-signal integrated circuit design. This candidate will contribute to the development of high-speed silicon photonics transceiver for next generation wireline communication system. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications.
• Design and tapeout ICs which include state-of-the-art circuit blocks e.g. analog-to-digital converter, equalizers (CTLE, DFE) as part of the high-speed data link system.
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electrical Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog and mixed-signal IC design methodologies and successful tapeout experience
• Familiar with analog and mixed-signal IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

We are looking for a candidate for high-speed analog and mixed-signal integrated circuit design. This candidate will contribute to the development of high-speed silicon photonics transceiver for next generation wireline communication system. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications.
• Design and tapeout ICs which include state-of-the-art circuit blocks e.g. analog-to-digital converter, equalizers (CTLE, DFE) as part of the high-speed data link system.
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electrical Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog and mixed-signal IC design methodologies and successful tapeout experience
• Familiar with analog and mixed-signal IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

We are looking for a self-motivated candidate with expertise in high performance digital design, DSP and mixed signal modeling join our cryogenic CMOS-based quantum control project. This candidate will work closely with our digital and analog design team as well as with the local physics and material designers to develop low-power, high fidelity and highly scalable control and read-out SoC for superconducting qubit-based quantum computing applications.

Job Description:

· Digital IC Design and system-level exploration:

o Lead and contribute to co-optimization between on-chip memory and DSP design and analog front-end (i.e. DAC, BPF, Mixer, LNA and ADC) to ensure high quantum control/readout as well as to optimize power consumption per channel

o Emphasize system-level perspective in the design process, considering overall system architecture and functionality

o Apply a deep understanding of cryogenic temperature effects on digital ICs and implement design strategies for optimal performance in low-temperature environments

o RTL implementation for custom circuit design using Verilog/SystemVerilog with focus on DDS, Filter and Error Correction Code

· Simulation, Verification, and Implementation:

o Conduct thorough simulation and verification of mixed signal designs to validate quantum control fidelity and digital-analog interface throughput

o Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration

o Perform timing analysis and collaborate with the team to optimize designs for timing closure

• Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II
• Collaborate closely with cross-functional teams, including hardware and software engineers, to seamlessly integrate digital ICs into the overall system architecture
• Prepare detailed design documentation, including specifications, test plans, and reports
• Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues
• Bring creative and innovative solutions to design challenges. Stay abreast of industry trends and emerging technologies
• Test and verify fabricated chip using FPGA and other lab equipment such as logic analyzer and oscilloscope

Requirements: Master’s, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 3 years of ASIC design.
• experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler), Photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

We are looking for a candidate for high-speed analog integrated circuit design. This candidate will contribute to the development of high linearity silicon photonics modulators for 6G and beyond communication systems. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications
• Design and tapeout ICs which include state-of-the-art circuit blocks, e.g. wideband linear low-noise amplifier and transimpedance amplifier with a focus on circuits interfacing with silicon photonics elements
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electronic Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

We are looking for a R&D Engineer as we are setting up our R&D center in Singapore. Applying Engineers MUST be very familiar with cables, connectors and wire harness products. Work experience in cables, connectors or wire harness industry is required. Must have the ability to develop new products. Pro-active, Can-do attitude.

Responsibilities:

• Collaborate closely with the Project Director and multidisciplinary teams to develop innovative design solutions, from concept through to construction.
• Manage project and design processes, ensuring timely delivery and adherence to deadlines, budgets, and regulatory requirements.
• Supervise and review drawings to ensure design constructability, contributing to firm-wide design excellence and problem-solving.
• Demonstrate creative thinking abilities and contributes to firm-wide design excellence and problem solving.
• Provide influencing ideas to enhance team productivity.
• Collaborate with project managers to execute design visions within project constraints, including timelines, budgets, and regulatory requirements.
• Ensure project filing is accordance to officewide standard system.
• Incorporates integrated sustainable design solutions into projects.
• Participates in managing client relationships and representing Company Brand when meeting with clients and other consultants.
• Attend presentations and meetings with client, consultants, and key stakeholders.
• Understands company agreements, contracts, and deliverables, and assures that company standards for project management are met.
• Contribute to the firm's promotion by participating in professional organizations and events, including international travel for project meetings, site visits, and business development as necessary.

Requirements:

• Bachelor's or Master's degree in Landscape Architecture, Architecture, or related field from an accredited institution.
• 7 to 10 years of professional experience in landscape architecture or related design field, demonstrating creative excellence.
• Proficient in AutoCAD, Revit, Adobe Creative Suite, SketchUp, Rhino; familiarity with BIM (Building Information Modeling) is a significant asset.
• Exceptional verbal and written communication skills, able to present concepts clearly and persuasively.
• Strong teamwork and interpersonal abilities, with experience in multidisciplinary collaboration.
• Professional licensure preferred but not required.

The incumbent will be responsible for the overall project assigned in all design phases (Phase 1 to Phase 4).

The incumbent will need to lead a team of Designers, FF&E designers, Co-ordinators & Draftsman while executing the work in accordance with the contract documents, schedule and budget.

He/she must possess the knowledge, experience and confidence to engage and professionally interact with clients, consultants, vendors and contractors.

He/she must be professional and a personable leader committed to the overall objective and self-development within the company.

Job Description

• Work Closely With Team Of Designers On Producing Design And Looked Into Detailing Which Is In Accordance To The Client’s Requirement,Contract Document And Budget.
• Oversees And Check The Design Produced By The Designers And Draftsman, To Ensure Compliance And Alignment To The Contract Document, Schedule And Budget.
• Assist In Project Co-Ordination Related Matters, Including Scheduling , Manpower Planning and Documentation Submission.
• Update Latest Developments/Information on The Projects With Respective Team Memebers Through Effective Communication.
• Able To Coordinate, Delegate, Give Feedback, And Mentor Subordinates Regarding Their Work And Professional Development Including Problems Solving.
• Review Of Shop Drawings.
• Attends Site Meetings And Site/Factory Inspection.
• Flexibility In Handling Multiple Projects.
• Build Positive Working Relationships With Clients For Repeat Business.

Work Experience & Qualifications

• Degree or Diploma in Architectural or Interior Design or equivalent.
• Minimum 15 years of relevant experience especially in hospitality industry and experience in leading a team of designers , FF&E designers and draftsman.
• Creativity and artistic flair.
• Good understanding of design (composition, planning, materials, details, furniture and fixtures).
• Able to interpret specifications and layouts.
• Good knowledge of drawing preparation and CAD standard, strong organizational skill and attentive to detail.
• Experience in handling projects in all design phases.
• Good knowledge of site work and progress.
• Strong in design detailing and freehand sketching.
• Familiar with hotel design programs, operators design standards and general rules of thumb
• Passionate and aware of global design trends.
• Highly motivated, strong communication, interpersonal, observation skills and team leader
• Responsible and able to work independently.
• Must be meticulous, a good team leader and able to work under pressure to meet tight deadlines and perform in a fast paced environment.
• Knowledge of AutoCAD and MS Office, Adobe Photoshop, 3D Max and sketch up will be a plus.
• Good problem solving skills.

Job purpose:

Assist in the maintenance of accounting principles, practices, and procedures to ensure accurate and timely financial statements

Job description:

• Handle full set of Account (AP/AR/GL) using Odoo.
• Prepare monthly financial Statements, management reports and other reports for fixed Asset, Stocks, Bank, Schedules etc.
• Handle day-to-day accounts activities.
• Handle any ad-assignments assigned by Director and Accountant

Requirement:

• Minimum Diploma in Accountancy
• 2 years’ relevant working experience in preparing full sets of accounts preferred

We are looking for a Design Manager Engineer & Design Engineer as we are setting up our R&D center in Singapore. Applying Engineers MUST be very familiar with cables, connectors and wire harness products. Work experience in cables, connectors or wire harness industry is required. Must have the ability to develop new products. Pro-active, Can-do attitude.

ROLES & RESPONSIBILITIES

• Assist in the planning and implementation of the project from working with Creative, Research, and Development on materials to use, fabrication and installation.
• Take charge to appoint the most appropriate suppliers and contractors that can deliver quality work and best pricing.
• Identify the resource requirements and assign individual responsibilities; ensuring that the project is delivered according to specified standards and within agreed schedule.
• Manage project budget and cost management.
• Be client-facing and be accountable for identifying client requirements and proactively managing client expectations, timelines, and deliverables by keeping communication with client and engaging them with a positive attitude.

REQUIREMENTS

• Minimum Diploma with at least 3 years of relevant experiences.
• Strong presentation and communication skills, as you are the connection between client and team.
• Able to read technical drawings and understand production requirements.
• Ability to manage multiple priorities in a fast-paced, matrixed environment.
• Excellent project management skills.
• Excellent written and verbal communication skills.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

• The candidate is responsible for the design of highspeed wireline transmitter >100Gbps.
• The candidate needs to work on the system architecture, schematic design, and mask layout.
• He/she also needs to perform pre and post-layout simulation to ensure the functionality and performance.

Qualifications

• Bachelor or Master degree in Electrical Engineering.
• Experience in EDA tools usage, including Cadence, Spectre, EMX, Synopsys, as well as Matlab.
• Some knowledge on communication system, such as BER, eye diagram, modulation/demodulation, pre-emphasis and etc.
• Open to Fixed Term Contract.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

• The candidate is responsible for the design of highspeed wireline receiver >100Gbps.
• The candidate needs to work on the system architecture, schematic design, and mask layout.
• He/she also needs to perform pre and post-layout simulation to ensure the functionality and performance.

Qualifications

• Bachelor or Master degree in Electrical Engineering.
• Experience in EDA tools usage, including Cadence, Spectre, EMX, Synopsys, as well as Matlab.
• Some knowledge on communication system, such as BER, eye diagram, modulation/demodulation, pre-emphasis and etc.
• Open to Fixed Term Contract.

We are hiring Junior/Senior Interior Designers !

Drop us an email with your resume today!

Email: [email protected]

Responsibilities:

• understand homeowner requirement and propose space planning with layout and material
• draw in 2D AutoCAD & 3D Sketch Up
• responsible to work out quotation
• responsible to supervise work progress and meet the timeline
• responsible to liaise with suppliers and subcontractors in order to have good quality works

Requirements:

• O level(Min), Diploma, Degree/Bachelor
• Min 1 years’ experience in interior design or construction project management or related experience
• Strong problem solving and analytical skills
• Able to converse in English and Mandarin(in order to handle queries and concerns from English and Chinese speaking counterparts in regards with the interior design related matters.)
• Creative, independent, self-discipline, willing to learn, love to talk to customer and meticulous
• Good communication and like to do presentation, able to meet client at weekend and public holidays

Why join us?

• SIDA Best Design Award Winner
• Qanvast Top 3 Interior Design Firm
• SuperTrust Award Winner Interior Design Firm
• Well-Known Boutique Interior Design Firm
• New 3500sf Design Show Room
• Plenty of opportunities to grow as a pioneer in our company
• Salary based or Profit sharing based

• Ability to read and interpret blueprints.
• Assisting supervisors with structural design, planning, layout, and installation.
• Conduct repair work and installation of doors, windows, drywall, cabinets, stairs, and other fixtures as required.
• Ability to assess the quality of woodwork and materials.
• Ability to operate tools, machines, and other equipment.
• Compliance with local building codes, and health and safety regulations.
• Provide excellent customer service.
• Ability to stand for prolonged periods, climb, pull, and lift heavy objects.

Job Descriptions:

• Prepare full set of account.
• Prepare and submission of quarterly Good and Services Tax (GST) to the Inland Revenue Authority of Singapore (IRAS).
• Prepare corporate tax computation and tax return (Form C / C-S).
• Prepare financial statements.
• Able to handle and face clients on the account related matters.

Requirements:

• ACCA Advance Diploma / Degree / ACCA Post Graduate.
• At least 1-year hands on experience in preparing full set of accounts.
• Knowledgeable about Singapore Companies Act, Cap. 50, Singapore Income Tax and GST.
• Positive working attitude and strong desire to learn.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 8 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterpart

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 5 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 3 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are looking for an Electrical Design Engineer to make a difference!

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

Technical team coordination & management

• Lead & approve the basic and detailed design of all technical aspects of an integrated solution, in line with customer and contract requirements (technical performance)
• Make sure that the project technical team delivers according to the project planning
• Monitor technical costs, make sure that the budget for the technical part is under control
• Coordinate all technical implementation activities done at factories or supplier premises and testing facilities until the project closure

Technical coordination of project stakeholders

• Work in close collaboration with Project Managers & other technical designers and engineers who take care of part of the technical scope
• Identify whether specific expertise support is needed and coordinate the expertise actions if any
• Lead and coordinate all technical aspects of the sub-contracted parts of the project, in strong coordination with the procurement team
• Act as a single point of contact for all project stakeholders regarding the technical content of the project; and ensure technical coordination among the project team

Design & Implementation: according to field of knowledge

• Perform, review some design and specification activities, by leveraging the Schneider Electric portfolio of products & systems in an optimized manner, in order to maximize profitability and limit technical risks; May perform some implementation/test activities (testing, FAT etc.)

Risk & Opportunity Management, Change management, Alert

• Identify any potential changes versus contract or already agreed design
• Work closely with the Project Manager to specify the changes and their implications for Schneider Electric (including cost impact evaluation), until getting a variation order
• Alert the Project Manager of any substantial issue that could affect the project performance or customer satisfaction

Customer interactions

• Lead technical discussions and clarifications with customers
• Act as the key and trusty contact person for all technical topics related to the project

Quality process, Methods, Tools

• Support the Project Manager to ensure full compliance with Schneider Electric processes, and with quality instructions, safety requirements, and governance principles
• Lead the technical team to correct any technical deviations or quality issues occurring during the project execution

Community of practices & Coaching

• Take part in the Technical Leaders' Community of Practice within your Execution Center, or globally within the Technical Excellence Community network
• Identify, get, formalize, share, and promote lessons learned and best practices
• Act as a role model and/or coach junior technical engineers and designers
• Be connected with the Line of Businesses and stay tuned on the last technical evolutions of equipment & systems (in your field of engineering, acting then as a referent in the Community)

What qualifications will make you successful?

• Minimum Bachelor’s Degree in Electrical Engineering
• Min 5 years in leading technical scope of projects in Power System or Electrical Distribution System application
• Working in one or several engineering application domains: Power System, Automation & Software, Telecom & IT, Cyber Security is a plus.
• Technical experience in a specific market segment (e.g., Power GRID & Utility, OGP, MMM, F&B, etc.) or in a customer application/process is a plus
• Ability to lead functional and remote technical teams
• Ability to communicate concisely and synthetically on technical issues/ topics
• Ability to read and understand applicable standards
• Ability to learn from others, share knowledge, coach others, and collaborate efficiently

What’s in it for me?

• Global family leave
• Comprehensive medical coverage for employee and dependents
• Blue sky Friday
• Worldwide Employee Stock Ownership
• On-site gym

…and more!

Let us learn about you! Apply today.