. JOB DESCRIPTION

Job Title

Carpentry production manager

Occupation

Supervisor and General Foreman (Furniture and Related Products Manufacturing)

Job Description & Requirements

Roles & Responsibilities

Must have at least 5 years experience

Must follow instruction and hard working and cooperative

Liaising with clients, suppliers and other construction professionals

Reading blueprints and designs to work to specifications prepared by other construction professionals, architects and building code recommendations

Starting from cutting and paste to build and install the finished carpentry work at the project site.

Good knowledge with the materials.

Good understanding of the drawings.

Good time management and teamwork spirits.

We are an equal-opportunity employer and value diversity among our teachers, staff and students.

At One World International School (OWIS), we are looking for passionate, adaptable educators who enjoy teaching students from diverse cultures. OWIS provides an individualised approach to learning that nurtures every aspect of child development. In addition to versatile learning spaces and a variety of extracurricular activities, we offer rigorous curricula that prepare students to be future innovators and leaders.

We are an IB Primary Years Programme (PYP) World School, a Cambridge International School and an IBDP School. All teaching positions require a high proficiency in spoken and written English, a degree, teaching qualifications and ICT literacy.

Newly-qualified Teachers are welcome to apply!

One World International School is committed to safeguarding and promoting the welfare of the children. We are committed to recruiting candidates who share this commitment to safeguarding. Before an offer is given, candidates will undergo child protection screening and will be required to provide a Police Verification Check from their country of residence.

If you are looking to work with enthusiastic students from around the world and become part of our dynamic school community, we invite you to submit your application for the following position.

Overall Responsibilities:

• Support the main classroom teacher in the implementation of daily programs to facilitate learning.
• Work with groups of students under the teacher’s direct supervision.
• Supervise the playing of educational games.
• Work with students who have varying degrees of learning support needs.
• Ensure that students adhere to the school’s behaviour policy.
• Prepare work and activities in accordance with the objectives set by the teacher.
• Assist the teacher in helping with the student’s physical needs, whilst also encouraging independence.
• Responsible for the upkeep of teaching resources, prepare art and craft materials, arrangement, appearance, decorations, and learning environment of the classroom
• Use positive discipline techniques at all times.
• Maintain and build relationships with children and parents.
• Being part of the team, you will participate in parents and community engagement activities.
• Give feedback to teachers on students’ progress.
• Any other related duties as requested by the Head of School.

Requirements:

• Be a passionate educator with the ability to deliver inquiry based learning.
• Creative and inspiring with loving energyDiploma/Certificate in Early Childhood.
• Care and Education preferred
• Prior experience in a classroom environment preferred.

Work Location: Punggol Campus

Benefits:

· Ability to garner overseas exposure in EU, USA and Asia due to global business model

· Opportunity to grow exponentially with the company

· Degree of freedom and responsibility to explore innovative ways to bring improvements to the organization

· Attractive bonuses and increments based on individual and company performance

Responsibilities:

· Taking a lead role in creative workshops, generating and visualising your own ideas and those of the team around you

· Production of detailed drawings and manufacturing specifications

· Transfer of designs to manufacture through liaison with external suppliers

· Spending time at design partners and manufacturing sites, acting as the liaison between the company, the design team and the manufacturer to ensure realisation of products

· Troubleshooting manufacturing problems

· Helping develop manufacturing cost models, and iterating this throughout the design process

· Advising design teams on the most suitable manufacturing processes

· Applying your knowledge of manufacturing in a packaging environment to ensure the correct processes are being followed

Qualifications & Requirements:

· Bachelor degree or Diploma in engineering, industrial design, or mechanics tertiary program

· Minimum 5 years relevant working experience in product Design and Development

· Strong in computer aided design, or CAD. Should be comfortable with taking ideas from a conceptual level through detail design

· Able to multi-task well and manage Automation systems project

· Able to demonstrate innovative past projects through a portfolio or simple case studies

· Comfortable in structural analysis, or FEA

· Familiar with design for manufacture, or DFM

· Ideally has experience working with industrial applications of plastic and plastic part design and or test qualification

Personal characteristics:

· Positive and hands-on attitude required for a promising start-up environment.

· Being self-motivated and responsible for the tasks assigned.

· Continuously strive for improvements both for personal and company.

. JOB DESCRIPTION

Job Title

Carpentry production manager

Occupation

Supervisor and General Foreman (Furniture and Related Products Manufacturing)

Job Description & Requirements

Roles & Responsibilities

Must have at least 5 years experience

Must follow instruction and hard working and cooperative

Liaising with clients, suppliers and other construction professionals

Reading blueprints and designs to work to specifications prepared by other construction professionals, architects and building code recommendations

Starting from cutting and paste to build and install the finished carpentry work at the project site.

Good knowledge with the materials.

Good understanding of the drawings.

Good time management and teamwork spirits.

Job duties & responsibilities:

• Provide technical guidance in developing new PCB designs and updating existing designs.
• Develop PCB layouts, perform component placements and determine wire routings.
• Verify existing designs and recommend improvements.
• Recommend new design concepts and validate the concept feasibility using circuit simulations.
• Prepare design documentations, requirements specifications and PCB models.
• Perform PCB design testing and analyze test results.
• Monitor and report project status to Manager on regular basis.
• Attend project meetings to discuss about project progress and issues.
• Ensure that project deliverables meet customer expectations.
• Propose process improvements to ensure PCB functionality, quality and reliability.

Job requirements:

• Diploma / degree in Electrical & Electronics Engineering /Computer Engineering.
• Preferably 1 year of experience in PCB schematic design & PCB artwork design.
• Entry-level candidates with keen interest in PCB design are welcome to apply. Training will be provided.
• Knowledge in Althium, Protel or any other electronics design software would be an added advantage.
• Self-motivated.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 3 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 3 years of ASIC design.
• experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 8 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterpart

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 2 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 5 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 5 years of ASIC design experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 5 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 8 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler), Photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Description:

• Design of subsystem electronics according to top-level requirements, analogue, digital and mixed signal circuit design, simulation, schematics capture and PCB layout
• Hands-on prototyping of PCBA, circuit debugging/troubleshooting
• Design verification and planning of test criteria, test protocols and documentation of design specifications
• Anticipate the design risk and implement design risk control measures
• Assist in development and testing of firmware drivers for various subsystem modules and such as sensors and actuators (e.g. I2C temperature sensor, accelerometer, vacuum pump, solenoid valve, etc.)
• Work in conjunction with firmware development team for firmware optimization and firmware/hardware bug resolution
• Manage verification and validation activities of electronics hardware including the performance, reliability and regulatory compliance such as EMC and product safety. Implement design changes to resolve failures in a timely manner
• Actively collaborate with cross functional team members throughout the product lifecycle
• Collaborate/liaise with 3rd party contract manufacturers to oversee the PCBA production, ICT/FCT testing and validation

Qualifications/Experience:

• Bachelors/Master’s degree in Electrical/Electronic Engineering
• 3 years of work experience in product development industry. Fresh graduates with good grades can be considered for junior level position.
• Strong theoretical and practical knowledge of analogue and digital circuits, operational amplifiers, MOSFET transistors and precision circuit design. Familiarity with designs involving optoelectronics such as laser diodes, photodiodes is a plus.
• Experience in schematics capture, multilayer PCB layout design using ECAD tools. Altium Designer experience is strongly preferred
• Familiarity with C/C++ programming language is a huge advantage
• Familiar with standard digital communication interfaces such as SPI/I2C/RS232/RS422/USB etc.
• Exposure to medical device development & ISO 13485 quality management system is a plus
• Full exposure to product development life cycle from proof of concept to DFM with proper documentation is a plus
• Excellent communication skills
• Able to work independently with minimum supervision and a strong team player

Sales Executives

Art N Craft Printing Pte Ltd

Responsibilities

· Generate sales through various methods (outbound cold calling, door-to-door, presentations, etc.)

· To develop and manage existing client account relationships to increase revenue spend and /or by targeting relevant leads in order to bring in new business

· Achieve Monthly sales target

· Build good relationship with client

Requirements

• Relevant Experience in Local Printing, Design, Media, Advertising Industry
• Established Client base / Portfolio
• Passion and enthusiasm
• Sales & Result Oriented
• Pleasant personality with good communication and interpersonal skills
• Computer Literate
• Liaise with English and Mandarin speaking customers
• Training Provided

Job Benefits

• 5 day work week

• Basic + Commission

Interested applicants, please send resume including availability, recently Photo and expected BASIC salary to: [email protected]

Art N Craft Printing Pte Ltd

Blk 65A Jalan Tenteram #01-06/07 St Michael Industrial Estate Singapore 328958. Tel 62551996

ARTICARES We are leaders in innovative medical technologies including human like decision-making robotics and artificially intelligent solutions that facilitate personalized rehabilitation after injuries such as stroke, dementia, and accidents – a common occurrence in aging population. Our solutions are the outcome of strong collaborations between experts in medical and engineering fields, validated by clinical studies, and made available to you by people who care about making every step of patients’ rehabilitation journey a bit easier. Today, we are one of the fastest-growing companies in this field and our solutions are deployed in major healthcare institutions in Singapore, APAC & EU.

We combine our innovations with out-of-the-box business offerings for providing comprehensive support throughout the hospital to home journey of patients. We are looking for a business development specialist who has the energy and skills to directly and in collaboration with our partners to ensure successful entry of our solutions in international and local markets.

Position/job title

Mechanical Design & Manufacturing Engineer

We are seeking for a profile with demonstrable technical background in mechanical design and manufacturing, particularly of robotic medical devices, to play role in transforming ideas into our products and solutions. In addition to growing together with us in rapidly expanding medical rehabilitation sector, playing this instrumental role would make you contribute to society by driving the realizations of innovative robotics as well as artificial intelligence for better future of rehabilitation.

Official Duty Station

Singapore

Roles & Responsibilities

· Assess requirements then transform into preliminary designs, prototypes, FAs, and final product (production-ready)

· Define and execute the qualifying criteria of every development stage.

· Coordinate production for delivery to customers, both internally and with manufacturing partners.

· Perform stringent risk and root cause analyses to ensure high-quality.

· Optimize development’s and production’s processes as well as costs.

Requirements

· Solid ownership, user-centred, and quality oriented.

· Solid experience in designing robotic device/mechatronic system.

· Proficient in DFMA for machining and soft moulding.

· Proficient in kinematic/motion analysis.

· Proficient in SOLIDWORKS.

· Bachelor’s degree in mechanical engineering, manufacturing, or related fields.

· Any of the followings would be plus:

o Experience in designing and manufacturing consumer products.

o Proficient in converting non-parametric model to parametric model.

o Experience in selection of DC motors

o Hands-on experience in complying with ISO 13485 QMS.

o Hands-on experience in complying with IEC 60601-1.

Introduction

ETH Zurich is one of the leading universities of the world with a strong focus on science and engineering. In 2010 it established the Singapore-ETH Centre (SEC) in collaboration with the National Research Foundation (NRF) to do interdisciplinary research on pressing problems.

In collaboration with the National University of Singapore (NUS), the Nanyang Technological University (NTU) and University of Illinois Urbana-Champaign (UIUC), SEC is undertaking a research programme on "Future Resilient Systems" (FRS). The FRS programme addresses the challenges with critical infrastructure systems that provide essential services to modern societies, which is of particular importance to innovation-driven economies like Singapore and Switzerland. Within this framework we are announcing the following job opening.

Task/Job description

• This position is under the FRS programme. The researcher will maintain and further develop InfraRisk, an integrated platform for the electricity grid, water network and transport system quantifying the effects of weather-related disruptive events on interdependent systems.
• The platform will be leveraged to design system resilience against disruptive events and across system interdependencies, with a focus on simulating and testing disruption/restoration scenarios relevant to Southeast Asia.
• An important technical aspect will be to model the recovery strategies considering interdependencies between the power, water, and transport systems.
• The ultimate goal of the integrated platform will be to identify features and requirements that aid in developing solutions to improve resilience.

Requirements

• The successful applicant must hold either a Master’s degree with a minimum of 1 year of working experience or a PhD/equivalent University level diploma in electrical, industrial & operational research, civil, mechanical, control engineering, or a related field.
• Principal qualifications include strong programming experience (preferably MATLAB or Python), analytical and quantitative skills and experience with robust optimization.
• She/he should be further experienced in resilience analysis, and in modelling power, water and/or transport systems.
• A solid knowledge of written and spoken English is mandatory, as this is the language for communication at work.
• We are looking for highly motivated and self-driven candidates, with good interpersonal skills and the ability to thrive in a diverse, multidisciplinary environment.
• Please note that salary will commensurate with qualifications and experience.

Information about the application process and contact for applicants

We look forward to receiving your online application including the following documents:

• A letter of motivation
• A CV
• Electronic copies of your educational certificates, and
• Contact details for at least 2 referees.

Applications via email or postal services will not be considered.

For further information about the Future Resilient Systems programme, please visit our website: https://frs.ethz.ch/. Questions regarding the position should be directed to Prof. Giovanni Sansavini by email to [email protected] (no applications).

Duration: 10 months to 1-year contract.

Work location: 1 Create Way, CREATE Tower, Singapore 138602 (NUS University Town)

The Singapore-ETH-Centre is an equal opportunity and family-friendly employer. All candidates will be evaluated on their merits and qualifications, without regards to gender, race, age or religion.

Job Responsibilities

· In-house design for company’s collaterals such as E-book (portfolio), graphics, etc.

· Maintain company’s objective by generating inbound leads via Facebook Ads, Google Ads (Paid and Organic)

· Content creation for social media platforms such as Facebook, Instagram, YouTube.

· Manage company’s website ( WordPress CMS ) for updates and tracking/processing write-in leads.

· Regular updating of new projects on the company’s website, interior portals and liaise with them for portfolio postings with project details.

· Liaison with the vendor for SEO performance and tracking of page ranking.

· Analyse Facebook Ads and Google Ads for tracking performance and metrics with social media tools such as Google Analytics/AdWords.

· Manage customers’ feedback/complaints and keep a record of reviews/testimonials.

· Brand and marketing development related activities

· Any other ad-hoc design/administrative duties as assigned

Job Requirements

· Minimum Diploma in Marketing, Mass Communications, Advertising/Media or equivalent.

· At least 1 year experience in the related field

· Experience in Digital Marketing, Content Marketing, SEO and SEM

· Effective communication and writing skills

· Experience in content creation and social media

· Knowledge of SEO, Google AdWords / Analytics, and content management system

· Able to work independently

· Dynamic personality

· Liaison of company clients and vendors

Job Description:

• To formulate space planning, interior design conceptualisation and concept development
• To generate 3D Computerised perspective drawings and all construction detail drawings
• To prepare Construction Specification / Design Documentations / Material Selection
• To prepare presentation such as design intent, colour scheme and material board
• To communicate and liaise with clients, contractors, consultants and project managers on all project matters

Requirements:

• Possess minimum Diploma / Degree in related discipline
• Preferably minimum 1 year working experience in Architecture / Interior Design for Commercial and Industrial Projects
• Competent in Autocad, 3D Studio Max, V-ray, Adobe Illustrator, Adobe Photoshop and Microsoft Office
• Able to independently design and prepare full sets of drawings from design intent to construction detailings
• Possess creative flair and good portfolio
• Possess a good knowledge of construction materials and various technical and building codes
• Able to multi-task and meet project schedule
• Able to travel for overseas projects
• Possess good interpersonal and communication skills
• Entry Level candidates are welcome

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Prepare meeting materials for production planning such as line-ups, rundowns and location surveys which includes schedule paperwork and camera scripts for Producers.
• Requistion of props and costumes.
• Ensure that all props and costumes are ready for actual filming.
• Manage talents and crew both in Studio and location filming and see to crowd control.
• Prepare production reports.
• Ensure there is continuity of costumes and props during production.
• Follow up on editing such as transfer and logging, dialogue dubbing and transcribing.

• Diploma and Degree graduates or candidates with 2 years of related experience in media are welcome to apply.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focusses on developing the technology and demonstrators for Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave passive and active circuits and subsystems.

Note: a design portfolio showcasing RF designs must be attached to the resume.

Qualifications

• Possess a PhD in Electrical Engineering
• Several years of experience in the simulation and design of microwave circuits and subsystems.
• Experience in the design of LNA, PA, mixer, control circuitry and antennas.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focusses on developing the technology and demonstrators for Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave passive and active circuits and subsystems.

Note: a design portfolio showcasing RF designs must be attached to the resume.

Qualifications

• Possess a Bachelor or Master degree in Electrical Engineering
• Several years of experience in the simulation and design of microwave circuits and subsystems.
• Experience in the design of LNA, PA, mixer, control circuitry and antennas.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.