Job Description

• Position: Senior Mechanical Design Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $7,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Responsible as the lead for the overall Mechanical engineering project activities.
• Responsible for optimized Mechanical engineering man hour utilization within the project.
• Coordinate between the other trades & internal for engineering integration.
• Coordinate with Project Lead on Project Engineering’s & Procurement Schedule.
• Prepare & Review Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities.
• Review Vendors’ Technical Specification/ drawings to ensure completeness & correctness with our requirement.
• Prepare & Review Equipment Parameter & Mandatory Calculation.
• Prepare & Review Piping Schematics (P&ID).
• Prepare & Review Machinery & HVAC Layout, Equipment Installation & Alignment.
• Prepare & Review Mechanical design and construction standard.
• Review 2D and 3D for piping detail and production design.
• Prepare & Review Testing Protocol & Operation Manual.
• Guiding and checking Mechanical engineer activities.

Requirements:

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of relevant work experience in marine/offshore industry machinery and piping new-building engineering design.
• Proficient in AutoCAD, Microsoft Office, and AVEVA.
• Knowledgeable about rules and regulations from Classification Society and Authorities.
• Familiar with the theory and calculations related to marine/offshore mechanical and piping design.
• Strong communication and analytical skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

About us:

Tree Art is the leading art education brand in Singapore, dedicated to providing a comprehensive platform for artistic development. With the concept of "from education to happiness" we have established a strong presence across the country, with 14 strategically located campuses. Our wide network of campuses ensures that students can easily access artistic learning opportunities in their respective communities.

Introduction:

As a Customer Service Representative, you will be the primary point of contact between Tree Art and prospective customers. Your role involves educating customers about our course curriculum, providing information, addressing inquiries, and assisting in closing sales. You will collaborate closely with the Centre Manager to ensure a smooth customer registration and enrollment process. Your administrative skills, familiarity with Microsoft Office, and proactive approach will contribute to improving sales and enhancing the overall customer experience.

Role and Responsibilities:

● Perform administrative duties using Microsoft Office applications.

● Familiarize yourself with the Tree Art curriculum and programs.

● Identify and recommend course curriculum that aligns with customers' needs and objectives.

● Liaise closely with customers, addressing course inquiries through walk-in and online platforms, and facilitating sales closure.

● Collaborate with the Centre Manager to ensure a seamless registration and enrollment process.

● Collect and review feedback from customers to improve sales and enhance the customer experience.

● Maintain database records and analyze sales data for administrative purposes.

● Undertake any additional duties and responsibilities assigned by the Centre Manager.

Qualification:

● Possess at least a diploma in any field.

● Fresh graduates who are proactive and sales-driven are encouraged to apply.

● Prior experience in sales is an added advantage.

Benefits:

● Competitive salary commensurate with experience.

● Health insurance and retirement benefits (if applicable).

● Professional development opportunities.

● Paid sick leave.

[Job ID: 812527]

Responsibilities

Tender Management:

• Oversee the preparation of tender and contract documents, including Bills of Quantities (BQ).
• Lead and review the costing, cost planning, and estimation process for tenders.
• Manage and support multiple M&E tender projects concurrently.
• Chair pre-tender meetings and allocate duties to team members during tender preparation.

Design Oversight:

• Supervise the preparation of preliminary design drawings and design calculations.
• Ensure compliance with client requirements, industry standards, and company policies.

Cost Control and Budgeting:

• Review and approve budgets for M&E works to ensure alignment with financial objectives.
• Analyze and mitigate risks related to project cost control and budget adherence.

Team Leadership and Development:

• Mentor and develop team members, ensuring alignment with organizational goals.
• Promote a collaborative and efficient work environment.

Client and Stakeholder Coordination:

• Act as the primary point of contact between clients and internal departments.
• Address and resolve design and tender-related queries promptly and effectively.

Documentation and Compliance:

• Ensure tenders and related documents are well-prepared, compliant, and submitted on time.
• Maintain comprehensive records of all tender activities.

Ad Hoc Duties:

• Perform other responsibilities as assigned by senior management.

Requirements :

• Diploma/Degree in Mechanical/Electrical Engineering or related field
• Minimum 5 years of experience
• Familiar with tendering, project cost control in M&E works
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

-------------------------------------------------------------------------------------------------------

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

https://goodjobcreations.com.sg/en/privacy-policy/

-------------------------------------------------------------------------------------------------------

EA License no.: 07C5771
EA Personnel Reg. No.: R22107257
EA Personnel Name: Li Wai Chun

Sembawang Confectionery is a traditional cake shop, opened in 1968. Committed to bringing our customers freshly baked bread with a traditional taste.

We are urgently looking for experienced Bakers to join our company.

Job Responsibilities

• Prepare, bake and present all baked items effectively and efficiently, meeting the company operations manual and gold standards.
• Able to produce breads / buns on schedule.
• Practice good housekeeping & workplace/kitchen safety awareness.
• Ensure that food hygiene and safety standards are maintained and comply.
• All other ad-hoc duties given by Supervisor.

Requirements

• Experience in bread making preferred.
• Possess Food hygiene certification.
• Able to understand English (most of our documents are in English).
• Able to work on weekends and public holidays.

Working hours

• Full-time position
• 6 days work per week

Working Location

Sembawang Confectionery (opposite Golden Mile Complex)

Blk 6 Beach Road, #01-4869, Singapore 190006

Interested applicants, please apply with your latest resume with your expected and current salary.

A Bird Handler's role is fully focused towards taking care of exotic Birds while assisting as a roving photographer, green screen photographer, green screen editor, VOS / cash register personnel, flaggers, and spec board sellers.

Key Responsibilities and Accountabilities

• Handle and care for the Company’s birds
• Responsible for the interaction of birds and guests during photography session
• Initiate guest interaction and deliver tip top service
• Handle and care for the company’s birds
• Encourage and provide advice to guests on how to pose for photographs with the birds
• Process and compile the finished products for sale
• Handle cashiering duties
• Prepare the site for daily operations
• Ensure that individual and overall sales target is achieved

Desirable Skills and Qualifications:

• Must have some experience in handling birds
• Possess at least 1 year of experience as a frontline staff in any industry
• Must be able to work on weekends and public holidays
• Strong in communication and interpersonal skills
• Possess an approachable and positive attitude

RESPONSIBILITIES AND DUTIES

· Cook and prepare a variety of food products (Training will be provided)

· Manage food preparations and cooking, safety and hygiene practices to ensure our customers received the exceptional culinary quality and experience

· Ensure areas are clean and tidy at all times

· Uphold personal hygiene and dress code standards

· Communicate effectively across all departments from kitchen to front of house

· Manage Inventory and stock receipt

· Stand in as a service crew if there are no order in the kitchen

QUALIFICATIONS AND SKILLS

· Able to communicate in both English/Mandarin

· Basic cooking skill to prepare bar food (Mainly deep-fry)

· Outgoing, presentable and service-oriented

· Team player, discipline and self-starter

· Able to work shifts, weekends and public holiday

· Candidates without any experience are absolutely welcome

Why join us ?

1. Attractive Gross Remuneration

2. Various allowance/incentive such as:

· Night Shift Allowance

· 13th Month AWS

· Perfomance Bonus

· 5 Rest Day Per Month

Job Summary:
We are seeking a creative and passionate Interior Designer to join our team. The ideal candidate will bring innovative design ideas to life, develop detailed project plans, and select materials that align with client needs and project goals. This role involves managing projects from concept to completion, ensuring high-quality execution and client satisfaction.

Key Responsibilities:

• Conceptualize and present unique interior design ideas.
• Develop detailed design plans and visualizations.
• Select materials, furnishings, and finishes that meet aesthetic and functional requirements.
• Manage project timelines, budgets, and client communication effectively.

Qualifications and Skills:

• Minimum Diploma in a Design-related field.
• Strong creative vision with an eye for detail.
• Hardworking, organized, and passionate about interior design.
• Excellent communication and project management skills.

Job Description:

• Deliver technical design of CNC solutions for customize specification.
• Produce 2D&3D engineering drawings using Solidwork and CATIA.
• Analyze existing systems and improve designs.
• Conduct technical design review and evaluation to ensure compliance to standards.
• Documenting the design process, iterations for fabrication.
• Perform other duties as assigned.

Job Requirement:

• Good interpersonal and communication skill
• Proficiency with engineering design programs such as AutoCAD, Solidworks
• Knowledge of design and engineering principles
• Attentive to detail and critically minded
• Welcoming fresh graduate from mechanical engineering

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Title: Senior Staff Design Verification Engineer(SoC)

Location: Singapore

About the role:

Our client is a global Precision Semiconductor Manufacturing business. They are market leaders in the development of ultra-low-power semiconductor solutions globally.

The company aims to pushin the boundaries of energy efficiency and enabling a new generation of intelligent, always-on devices. Their focus on innovation and sustainability has earned them recognition in the industry and made them a trusted partner for many leading manufacturers.

Deepening its commitment to Singapore as a strategic hub to drive breakthroughs in product and technical innovation, they are looking to hire a Senior Staff Design Verification Engineer(SoC),

a Subject Matter Expert who is the critical point of contact in terms of ensuring a smooth flow of end to end verification plans for complex ultra-low power technology designs, supporting all phases of strategic development, from creating test plans and testbench to performing gate-level-simulations and participation in FPGA and Pre-silicon bring-ups in Singapore and beyond.

Responsibilities:
Reporting to SoC Engineering Director, and this position will be focusing on the below:

• Develop and execute comprehensive verification plans for complex SoC designs, ensuring functional correctness across all levels (block, sub-system, and full-chip).
• Possess a deep understanding of various architectures and confidently integrate third-party IPs and VIPs.
• Demonstrate expertise in both digital and mixed-signal verification methodologies, with a focus on low-power design and verification challenges.
• Utilize SystemVerilog (UVM) and other industry-standard verification languages to create robust test benches and verification environments.
• Collaborate effectively with design engineers and architects to define verification strategies, identify potential issues, and achieve optimal coverage.
• Continuously improve verification methodologies and stay up-to-date on the latest verification trends and tools.

Qualifications:

• Bachelor's degree in Microelectronics or Electrical Engineering or a related field (Master's degree a plus).
• Minimum 5-8 years of experience in the field of semiconductor design verification.
• Proven track record of successfully verifying complex digital and mixed-signal SoC designs.
• Strong understanding of low-power design principles and verification techniques.
• Proficiency in Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Makefile
• Technologies: ARM SoC (Preferred), AMB, AXI/AHB/APB, DMA, Flow Control, Serial Devices, QoS, MIPI(CSI/DSI), Crypto,OTP, DSP, Low-Power

Interested? Here’s what to do next:

Please apply to the role with a recent copy of your CV. We will be in touch once we review your profile for suitability.

Singapore Employment Agency License No.: 16S8069

Privacy Statement: By submitting an application and sharing your personal information with us, you consent to such information being collected, held, used and disclosed in accordance with our Privacy Policy (https://www.wilsonhcg.com/privacy-policy)

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Perform design for manufacturability in all new projects.
• Provide PCB manufacturing technical advice to customers on their new projects.
• Perform feasibility studies and reviews for all new data received from customers.
• Adhoc duties as assigned.

Requirements:

• Degree/Diploma in Electrical & Electronics Engineering in Printed Wiring Board manufacturing environment
• Good communication, report writing and presentation skills
• Good analytical skill with ability to work independently
• Ability to communicate with all levels of staffs
• Entry level are welcome to apply as training will be provided.

Electronics MFG Industry

Loyang Area (Tpt pick up at designated area)

Interested applicants, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

DUTIES & RESPONSIBILITIES

· Liaise with consultants, clients and subcontractors on the progress of M&E works.

· Management of material, equipment and manpower in his section to ensure proper and economic usage.

· In-charge of receipt, transfer and control of M&E construction materials in designated area.

· Enforce the implementation of occupational health and safety procedures in accordance to Project Safety manual.

· To implement and monitor that the permit to work system is properly followed on site.

· To follow all QA/QC procedures and implement CONQUAS standard for site works on site.

· Prepare daily report for related works,

· To ensure the progress of works is on schedule.

· Supervise and ensure works are in accordance to the contract drawings and specifications.

· Coordinate / prepare technical submissions with suppliers / subcontractors.

· Prepare method statement, shop drawings, CSD drawing, installation / T&C check sheets, work progress report and other relevant documents for M&E related works with project teams.

· To assist in updating site work status report.

· Assist the Project Manager on all M&E matters including preparing M&E Master Construction and T&C Schedule.

· Liaise and work with relevant authorities / subcontractors / clients on shop drawings / equipment submissions, inspections, testing requirements and commissioning.

· Hold technical discussions with various stakeholders to resolve technical / site issues.

· Ad-hoc duties as assigned by Management.

Job responsibilities:

• Assist the WSH Manager to identify and assess risks arising from the workplace.

• Conduct site safety inspection and enforce compliance on prevailing MOM Safety Acts and Regulations.

• Assist to conduct Safety Committee meetings, organize and promote safety events and campaign, etc.

• Conduct daily toolbox meetings to highlight safety issues.

• Supervise and attend to all issues related to workplace safety, health and environmental control.

• Ensure all documentation / permits / licenses related to work place safety, health and environmental control required by authorities and management are kept in order.

• Assist in conducting periodic WSH cross inspection for all sites to ensure compliance with government safety regulations and industry standards.

• Assist in conducting safety training / briefing such as familiarization on Risk Management’s standardize procedures to the respective site team to ensure safety awareness that the operations are safe and in compliance with statutory regulations and international standards / practices.

• Identify unsafe acts or practice and promptly correct any unsafe condition or practice.

• Any other duties that may be assigned.

Requirements:

• Advance certificate in Workplace Safety & Health/NITEC in Engineering (Environment, Health, Safety) or relevant field.

• Minimum 2 years of relevant working experience

• Familiar with regulatory requirements related to workplace safety and health, and all other aspects of safety

• Possess a high level of the initiative, strong interpersonal and communication skills.

Responsibilities:

- Planning of art lessons / programs according to students' learning objectives

- Developing students' drawing, colouring and painting techniques and interest in art

- Able to conduct art-related activities such as oil painting, acrylic painting, watercolour painting, sketching, clay, chinese painting, art & craft independently

- Able to teach students of different age group (from age 3 to adult)

- Assess students' learning progress and feedback to parents

- Prepare the classroom and set up equipment / materials prior every lessons

- Perform daily housekeeping to keep the venue clean & tidy especially after every classes

- Any other duties as assigned by superior

Requirements:

- Passionate in Art Education

- Minimum Diploma in Fine Arts

- Bilingual in English and Chinese as to liaise with Chinese speaking parents

- Good communication & interpersonal skills

- Friendly, patience and creative

- Able to work on weekends & PH

- Basic salary + incentives (upon confirmation)

Please send detailed Resume to [email protected]

Roles & Responsibilities

Job Description:
We are seeking a proactive Sales & marketing executive to expand our business by building and nurturing relationships with architectural firms and other stakeholders in the construction industry.

Key Responsibilities:

• Develop and maintain strong networks with architectural firms to promote company products and solutions.
• Identify new business opportunities and manage the sales process from lead generation to closing.
• Provide technical advice and tailored solutions to meet client needs.
• Collaborate with internal teams to ensure seamless project delivery.
• Achieve sales targets and drive revenue growth.

Requirements:

• Diploma/Degree in Engineering, Business, or a related field.
• Proven experience in sales within the construction industry, with a strong network in architectural firms.
• Knowledge of construction materials, systems, or solutions.
• Excellent communication, presentation, and relationship-building skills.
• Self-motivated and results-oriented.

Senior IT Business Analyst/Product Design
Duration: 12 Months (convertible to perm)
Location: Beach Road


YOUR RESPONSIBILITIES:

• Lead program/project requirements and design sprints to define business and technical requirements through design implementation.
• Manage the requirements delivery (planning, estimation, risk management, reporting) to succeed in meeting overall program/project delivery.
• Leverage business knowledge to advise features/requirements priorities to delivery leads and/or product owners.
• Gather requirements by facilitating/coordinating meetings and conversations between business users, product owners, designers, SMEs, tech leads, and other relevant stakeholders.
• Identify people and systems impacted by functional and non-functional requirements.
• Collaborate with AI-enabled tools and methodologies to ensure requirements are effectively integrated into AI-supported workflows.
• Create/gather acceptance criteria in user stories and prepare any requirements specifications.
• Validate AI-generated outputs, ensuring alignment with business objectives and compliance with pre-set rules.
• Proactively engage, manage, and build strong relationships with clients and stakeholders.
• Work closely with Developers, DevOps engineers, Designers, and QA teams during all phases of the development lifecycle.
• Participate actively in mob programming sessions to facilitate AI-supported collaboration and contextual alignment among team members.

Requirements:

• Degree in Information Technology or equivalent.
• Relevant domain: Financial Institution, Retail, E-Commerce, Environmental, Social, and Corporate Governance (ESG).
• With more than 5 years of working experience in IT business analysis, including experience in AI-driven workflows or collaborative AI-enabled team structures.
• Good understanding of enterprise applications or prior experience in various tech products/development stacks is ideal but not mandatory.
• Strong familiarity with AI tools such as ChatGPT, GitHub Copilot, Jira Automation, or other AI-enabled platforms is a plus.
• Participated in full software or product development cycles.
• Knowledge and experience of Agile development practices.
• Experience working within teams or other high-collaboration environments is highly desirable.

Key Responsibilities:

• Create conceptual designs and presentations, including mood boards, sketches, and 3D models.
• Develop detailed design plans, floor layouts, and specifications.
• Engage with clients to understand their requirements, preferences, and goals.
• Present design concepts and ensure client approval at every stage.
• Coordinate with architects, contractors, and suppliers to ensure seamless project execution.
• Manage project timelines and budgets, ensuring all deliverables meet quality standards.
• Source and recommend materials, furnishings, and fixtures that align with the design vision and budget.
• Stay updated on market trends and innovative materials.
• Ensure designs comply with safety, accessibility, and building code requirements.
• Prepare and submit necessary documentation for regulatory approvals.
• Work closely with other designers, drafters, and project coordinators to achieve project goals.
• Provide guidance and feedback to junior team members as required.

Qualifications:

• Proficiency in design software such as AutoCAD, SketchUp, 3D Max, Revit, or similar tools.
• Strong understanding of space planning, materials, and design principles.
• Excellent visualization skills with attention to detail.
• Candidates with no experience are welcome to apply.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Scope:

• Design and develop mechanical systems, products, and components
• Create detailed technical drawings and specifications using CAD software (e.g., AutoCAD, SolidWorks, CATIA)
• Conduct simulations and analysis (e.g., stress, thermal, fluid dynamics) to validate designs
• Collaborate with cross-functional teams to integrate mechanical designs with other systems
• Perform design modifications and improvements based on feedback and testing results
• Develop prototypes and conduct hands-on testing to ensure design feasibility and performance
• Select materials, components, and manufacturing processes for product development
• Ensure designs comply with safety, regulatory, and industry standards
• Prepare and review technical documentation, reports, and presentations for stakeholders
• Support the manufacturing team in product assembly, testing, and troubleshooting
• Manage design projects, ensuring timelines, budgets, and quality standards are met
• Continuously research and apply new design technologies and innovations to improve mechanical systems

Requirements:

• ITE, Diploma, or Degree in Mechanical Engineering
• Minimum two years of experience in customized automation machine design
• Experience in semi-con, connector, or machine design preferred
• Knowledge of SolidWorks, with Pro-E and Inventor as added advantages
• Strong understanding of mechanical movement, function, and performance
• Good perception of 2D & 3D objects and machining processes
• Passion for designing high-performance machines

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

THE PERSON:

The ideal candidate should have a deep understanding of analog design and able to lead, attend and present at design review meetings with teams worldwide.

KEY RESPONSIBILITIES:

• Circuit design of wireline transceiver building blocks (PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer, etc.)
• Conduct peer reviews of circuit design and verification results
• Working with validation team to evaluate silicon results

PREFERRED EXPERIENCE:

• Extensive experience with high speed analog design with blocks like ADC, PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer.
• Experience with latest process technologies like 7nm or below Finfet technology.

ACADEMIC CREDENTIALS:

• Bachelors/Masters/Phd Degree in Electronic Engineering

LOCATION:

Singapore

Job Scope:

• Lead the design and development of engineering projects, ensuring compliance with specifications and standards
• Collaborate with cross-functional teams, including manufacturing, quality assurance, and project management
• Create and review detailed design drawings and models using CAD software
• Conduct design analysis and simulations to validate performance and reliability
• Mentor and provide guidance to junior engineers and design team members
• Manage project timelines and deliverables, ensuring adherence to schedules and budgets
• Coordinate with clients and stakeholders to gather requirements and provide technical support
• Identify and troubleshoot design issues, implementing effective solutions
• Stay updated on industry trends and emerging technologies to enhance design processes
• Prepare technical documentation and reports for project milestones and reviews

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• Over 5 years of experience in semiconductor equipment design
• Strong knowledge and experience in:
• Design of automation or semiconductor equipment
• High-speed pick and place mechanisms
• Familiarity with 3D Computer Aided Design software
• Ability to plan, prioritize, and coordinate projects effectively
• Self-motivated and capable of independent work, with strong communication skills
• Equipment troubleshooting skills
• Ability to produce detailed mechanical drawings and apply Geometric Dimensioning & Tolerancing knowledge

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description & Requirements

• Experienced designers
• No experience personal are welcome too
• Training will be provided as long as you're willing to learn.
• Commission based
• Able to work on weekends/ public holidays base on client's requirements.
• Singaporean and PR only.

JOB SCOPE

• Schedule client meetings to understand their preferences
• Layout planning, Material and creative proposals
• Quotation preparations
• Clinch project deals
• Arrange and Schedule workers to ensure on-time project completion

Job Requirements

• Sales driven
• Service-oriented with excellent interpersonal,communication and presentation skills.
• Be willing to learn and improve
• Ability to understand clients' need
• Responsible and be on time for meetings
• Be proactive
• Travelling to jobsites to ensure work is being done
• Proficient in Sketchup, Photoshop, AutoCad and MS Office.

Job description:

• Operates according to company’s quality policy and in compliance to customer’s service standard
• To meet basic and routine requirements of internal and external customers/forwarders
• Communicate and liaise with various external parties pertaining to shipment and orders
• Update distribution database and network
• Maintain and filing of documentation
• May need to support operations if there are any urgent orders.
• Perform other assigned duties as required.

Requirement:

• At least 1 to 3 years of working experience, preferably in a transport/freight/haulage environment
• Good PC and office skills
• Sensitive to details and accuracy
• Good communication skills
• Able to commit Monday to Friday and half Saturday.
• Requires class 3 driving license to cover for driver or urgent delivery if needed

Duties and Responsibilities:

• Identify current and potential product shortages, develop and execute recovery, advise interested parties of status and recovery plans
• Release orders based on material requirements planning (MRP) and coordinate the flow of material throughout the customer order requirements
• Coordinate with Purchasing for availability of raw materials
• Coordinate material movement between vendors, warehouse and the production floor
• Assist in the development, implementation, analysis and coordination of the master production schedule
• Utilize Material Requirements Planning system (MRP) to ensure that data is accurate and up to date
• Facilitate transmittal of customer orders to distribution center and manufacturing facilities including shipment and paperwork of international orders; serve as key contact for customer service inquiries
• Maintain and update master files [items, vendors, etc] including new item setup
• Set up and monitor the integrity of Bill of Materials (BOM) and manage inventory accuracy
• Thoroughly review, familiarize and understand existing BOM structure as well as the physical products
• Key participant in developing and managing company SOP, assembly &parts drawing database process
• Manage inventory levels to meet corporate goals
• Coordinate and manage monthly cycle counts for all manufacturing locations and distribution center; key participant in annual physical inventory
• Support inventory checks to validate inventory accuracy; investigate & reconcile discrepancies & negatives
• Posting of daily production and inventory transactions
• Analyze data and collaborate with others to determine and apply appropriate ordering, inventory, and replenishment policies
• Code and prepareproper paperwork for billing and authorization of invoices per defined processes
• Provide department capacity plans, on a weekly basis
• Assist in maintaining the monthly KPI
• Provide reports and requested information as needed
• All other duties as assigned

Qualifications and Experience:

• Minimum diploma or equivalent with 3-5 years professional experience in manufacturing planning, inventory control, materials planning role
• Knowledge and experience with Sales & Operations Planning
• Strong understanding of MRP and supply chain software
• Advanced computer skills, Excel experience mandatory
• Outstanding planning and organizational skills
• Extremely strong analytical and problem-solving skills

# 6 days work week

# Working Hours: Mondays to Saturdays – 10:45 to 19:30 | Sundays/PH – 10:45 to 17:30

Job Responsibilities:

• Attending to customer’s enquiries at Walk-in Service counter
• Handle and resolve customer complaints
• Maintain of stock inventory
• Preparation of weekly/ monthly report
• Keep front desk neat & tidy with necessary material
• Take up other duties as assigned

Job Requirements:

• “O” Level/ ITE Nitec/ Diploma in related field
• Proficient in Microsoft Office
• Initiative with positive attitude, willingness to learn and must be a team player
• Committed and able to work independently
• Friendly and Customer service oriented
• Good communication skills

Work location: Bedok Mall

Job Responsibilities:

• Ensure daily delivery fulfilment
• Ensure delivery inventory issued for daily delivery
• Ensure delivered items to be in excellent condition when delivered to customer's place
• Responsible for the cleanliness and working condition of company's vehicle
• Any other ad-hoc duties as assigned

Requirements:

• Possess Class 3 license.
• Pleasant and polite, and be able to liaise with English/Chinese speaker
• Familiar with Singapore roads
• Willing to work 5.5days work week + OT as required
• Able to start work immediately or within short notice
• Working location: Woodlands Spectrum / Changi South Street 2