(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Descriptions:

1. Participate in high-level product specifications, microarchitecture and implementation of high-speed memory interfaces

2. Responsible for delivery of AMS circuits in SerDes, including the evaluation of different circuit topologies

3. Worked on high-speed serial and parallel interface design, defining specifications and implementing modules such as bandgap, bias circuits, LDO regulators, amplifiers, comparators, switched capacitor circuits, ADCs, DACs, oscillators, filters, Tx/Rx equalization techniques and circuits such as de emphasis, CTLE, DFE, CDR architecture and implementation, high-speed digital circuits (serializers, deserializers, counters, dividers, etc.)

4. Work with the verification team for lab debugging

5. Work with the software team and/or customers to solve problems, debug and tune system performance

Job Requirements:

1. Bachelor's degree in communications, electronic engineering or computer engineering, master’s degree preferred

2. More than 4 years (senior engineer) and 6 years (staff engineer) of ASIC design experience, familiar with ASIC development process

3. Good AMS circuit design skills and EDA tools such as Cadence Virtuoso, Calibre, Hspice/Spectre, and static timing analysis tools (e.g., Nanotime)

4. Familiarity with high-speed interfaces such as DDR, SerDes, PCIe is preferred

5. Ability to solve customer problems and deliver results in a timely manner

6. Strong organizational and communication skills where English is a must and Chinese is preferred

HOW TO APPLY:

Interested applicants, kindly send your resume to [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Mason & Co is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Mason & Co Pte Ltd

EA License No: 19C9622

EA Personnel: Cheah Wei Xuan (Thea)

EA Personnel Reg No: R23118878

Architecture / Interior Design, Building and Construction, Design, Engineering, General Management, Manage the Project, Prepare the Auto Cad drawing for New projects and upgrading works to Submit Clints when necessary, manage the Project. Manage the employees, Prepare Tender and Quotations when necessary. Monitor Project, Attend Meeting, arrange Meeting ect. Monitor clients and Project. Assist the Project when necessary. Work with Team works ect.

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Strong organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

- Permanent

- Up to $6000 + VB

- Mon to Fri: 8.30am – 5.30pm

- Jurong East

Job Responsibilities:

• System Engineering Design
• Generating Test Plan & Procedures
• Sourcing and Procurement of System Hardware
• Planning and Setting up Test Lab
• Conduct Factory Acceptance Test
• Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites
• Perform Troubleshooting and Resolving System Faults
• Perform On-Site Acceptance Test
• Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Period:

• Permanent

Location:

• Jurong East

​Working hours:

• Mon to Fri: 8.30am – 5.30pm

Salary:

• Up to $6,000 + VB

Job Requirements:

• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Minimum 2 to 3 years working experience in industry
• Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred
• Computer literate e.g. MS office, Visio
• Strong Oral and Written Communication Skills
• Excellent Time-management
• Good Learning Capability

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Reg No: R1332758)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: 97C4832)

160 Robinson Road, #13-07/08/09 SBF Center, Singapore 068914
T: 6337 3183 | W: www.successhrc.com.sg

Senior/Civil & Structural Design Engineer (A1 main contractor)

Our client is a leading reputable A1 main contractor renowned for their impressive portfolio of iconic mixed development, residential and industrial building projects across Singapore. They’re now looking for a Senior/C&S Design Engineer to join them for an iconic institutional building project in the CBD area, supporting their ongoing contributions to the Singapore building landscape.

Job Responsibilities

• Provide technical expertise in the design and coordination of the civil and structural aspects of our construction projects.
• Work closely with project teams to ensure that all structural elements are designed to meet project specifications, regulations, and quality standards.
• Coordinate and liaise with relevant stakeholders to ensure the design complies with all requirement
• Prepare and present technical engineering reports, calculations, drawings, and specifications for project designs.
• Participate in the value engineering process to ensure cost-effective and efficient design solutions.

Requirements

• Degree in Civil/Structural Engineering, Construction Management, or related field
• Minimum 4 years of relevant building project/steel structures experience
• Possess knowledge of preparing construction sequencing drawings
• Experienced in resolving site issues too

Location: Central

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Project Coordinator

Salary: $3,200 - $4,000

Working Hours: Monday - Sunday, 6 days shift work 10.30am-7pm; If work night shift next day will come late hours

Working Location: Site (Islandwide)

Office Location: Ang Mo Kio Industrial Park

Job Scope:

• Able to manage projects independently
• Oversee project operations and liaise with clients, subcontractors and suppliers on project matters
• Ensure that project works are completed with respect to the scheduled dates
• Cost and quality control of projects
• Ensure that construction teams and sub-contractors adopt all necessary measures and comply with safety, environmental and other relevant legislation and requirements in the contract

Requirements:

• Minimum 2 year of relevant experience
• Familiar with building plans submission procedures and approvals
• With valid class 3 license will be an advantage

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

New Year Get New Job!

Mechanical Design Engineer x 2

Bachelors Degree/Diploma in Mechanical/Mechatronics.
At least 3-4 years experiences in Industrial Automation systems.
Proficient in solidworks 3D software and AutoCAD drafting tools.
Capable to work independently
Ability to design equipment with mechanical, pneumatic and electronic system
Willing to travel in the Asian Regions.
Extensive knowledge and experience in process automation system

[Job ID: 812527]

Responsibilities

Tender Management:

• Oversee the preparation of tender and contract documents, including Bills of Quantities (BQ).
• Lead and review the costing, cost planning, and estimation process for tenders.
• Manage and support multiple M&E tender projects concurrently.
• Chair pre-tender meetings and allocate duties to team members during tender preparation.

Design Oversight:

• Supervise the preparation of preliminary design drawings and design calculations.
• Ensure compliance with client requirements, industry standards, and company policies.

Cost Control and Budgeting:

• Review and approve budgets for M&E works to ensure alignment with financial objectives.
• Analyze and mitigate risks related to project cost control and budget adherence.

Team Leadership and Development:

• Mentor and develop team members, ensuring alignment with organizational goals.
• Promote a collaborative and efficient work environment.

Client and Stakeholder Coordination:

• Act as the primary point of contact between clients and internal departments.
• Address and resolve design and tender-related queries promptly and effectively.

Documentation and Compliance:

• Ensure tenders and related documents are well-prepared, compliant, and submitted on time.
• Maintain comprehensive records of all tender activities.

Ad Hoc Duties:

• Perform other responsibilities as assigned by senior management.

Requirements :

• Diploma/Degree in Mechanical/Electrical Engineering or related field
• Minimum 5 years of experience
• Familiar with tendering, project cost control in M&E works
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

-------------------------------------------------------------------------------------------------------

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

https://goodjobcreations.com.sg/en/privacy-policy/

-------------------------------------------------------------------------------------------------------

EA License no.: 07C5771
EA Personnel Reg. No.: R22107257
EA Personnel Name: Li Wai Chun

Job Responsibilities:

• Develop Low-Power Design Workflows:
  Own the design process to minimize power consumption while ensuring performance and reliability using advanced tools and techniques.
• Full-Chip Floor Planning and Routing:
  Lead floor planning and place-and-route efforts to optimize chip area and meet performance, area, and power goals.
• Power Network Design:
  Create and analyze robust power networks to ensure performance, minimize losses, and support low-power goals.
• Timing Closure and Signoff:
  Collaborate with teams to resolve timing issues and manage power and signal integrity for design verification.
• Physical Verification (DRC and LVS):
  Ensure compliance with layout and manufacturing rules through DRC and LVS for a tape-out-ready design.
• Cross-Team Collaboration:
  Work with engineers across functions to align designs with chip architecture and solve design challenges.
• Continuous Improvement:
  Stay updated on design advancements and improve workflows for better efficiency and low-power optimization.

Requirements:

• Educational Background:
  Bachelor’s degree or higher in Electronics, Computer Science, Electrical Engineering, or a related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience:
  Minimum X years in physical design with a focus on high-performance, low-power designs. Must have tape-out experience and familiarity with advanced semiconductor technologies (12nm and below).
• Technical Expertise:
  Proficient in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Strong knowledge of power network design, IR drop analysis, and timing closure with static timing analysis (STA) tools like PrimeTime.
• Software Knowledge:
  Experience with tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Experience:
  Hands-on expertise in place-and-route methodologies for optimizing performance, power, and area.
• Soft Skills:
  Excellent communication and collaboration skills to work effectively in multidisciplinary teams. Strong problem-solving and critical thinking abilities to address design challenges.
• Preferred Skills:
  Experience with advanced low-power techniques, deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, and design-for-manufacturing (DFM) principles.

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

Account Executive

(Interior Design Industry)

• Nearest MRT : Redhill
• Working days: 5 days
• Mon to Fri 9/10am to 5pm (can WFH 1-2 days per week)
• Salary: S$ 2,500 to 3,000

Requirements

• Diploma in Accounting, Finance, or a related field.
• 2 years of full-set accounting experience.
• Proficiency in accounting software (e.g., QuickBooks).
• We are a start-up interior design firm looking for detailed-oriented and organized accounts executive to join our company.
• We allow hybrid working arrangements and has a collaborative working environment.

Job Description:

• Handle full sets of accounts including invoicing, receipt updates, vendor invoice processing, payment arrangements, journal entries, maintenance, bank reconciliation, balance sheet schedules, fixed assets registers, and general ledger
• Manage day-to-day financial operations and monitor cashflow
• Prepare and review gst submission and tax returns
• Preparation of financial statements and assist in other related statutory filings required
• Manage end to end payroll process, including preparation, calculation and disbursement of monthly salary/commission
• Ensure compliance with all statutory requirements such as CPF, income tax and other relevant payroll tax obligations
• Support general administrative task

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Description

• Industry/ Organization Type: Manufacturing/Food Production
• Position Title: Marketing & Design Coordinator (Food Products)/ Marketing Executive
• Working Location: Jurong West
• Working Hours: 5 days, Mon - Fri (8 am – 5 pm)
• Salary Package: Up to $2900 (basic) + $90 (Transport Allowance) + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Oversee brand promotional activities and manage packaging artwork edits.
• Act as an in-house designer for urgent packaging modifications and creation of new Point of Sale Materials (POSMs).
• Maintain and update website content.
• Assist in the development and planning of new products, guiding them from concept to commercialization.
• Support additional marketing activities as needed.

APPLY NOW!!!

• Minimum Diploma holder with 1-2 years of relevant experience.
• Proficiency in using Adobe Illustrator and Photoshop for designing and editing artwork and packaging.
• Experience with social media marketing is highly desirable.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69402 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Acting role:

The Technical Controller appointed must possess a civil or structural engineering degree from a recognised institution and have the right qualifications and experience.

Resident Engineers must meet the acceptable qualifications set by BCA.

(Must be qualified by BCA)

Project Manager (Main jobscope)

• Familiar with all the documents submission to relevant government authorities
• Liaise with consultants and/ or sub-contractors engaged on the project
• Attend regular meeetings with client/ owner/ contractors/ sub-contractors and ensure the progress is on schedule
• Identify and comply with all applicable statuary/ regulatory requirements related to project
• Communication to external parties including client, subcontractors, consultants, vendors, etc on project needs, requirements and schedule by means of daily construction oversight
• Plan the work schedule and efficiently organize the site facilities in order to meet an agreed program of deadlines
• Monitor and manage day-to-day operations of projects, including developing and coordinating activities with other sub-contractors
• Able to read submission plan.

Job Requirement:

• Candidate must possess at least Bachelor's Degree in Engineering (Civil) recognised by PE Board or equivalent
• At least 8 years of working experience in the related field is required for this position

Location: Redhill

Basic + Commission + VB

JD:

• Research market trends, competitor offerings, and emerging client needs within sectors like commercial office/Retail design & renovation
• Proactively seek out and generate new business leads through networking, events, industry associations, cold call and referrals.
• Draw up networking proposals customized to individual sector
• Liaison between client, designer and other parties leading up to the securing of project, while ensuring client’s requirements are met and exceeded
• Prepare sales and marketing materials
• Work on project pricing, contracts, and fee negotiations that balance profitability with competitive positioning.
• Achieve and Deliver Sales Target
• Support in all aspect of Sales activities
• Manage and maintain clientele relationship
• Collate and evaluate client feedback and highlighting client feedback from customers for management analysis and follow-up

Requirement

• Diploma in Marketing, Business, Interior Design, or a related field.
• Min 3 years of experience in Business development, preferably in the interior design on commercial office/retail.
• Strong communication and interpersonal skills, with an ability to understand design concepts & to liaise with individuals at all level
• Committed, sales target driven and self-motivated
• Responsible and team player.
• Creative mindset with a passion for interior design.
• Excellent networking & communication and negotiation skills, with the ability to liaise with individuals at all level
• Committed, sales target driven and self-motivated

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Sim Jia Hui (Jacinda)

EA Personnel Reg No: R22106242

Job Responsibilities:

• Lead Analog Circuit Design and Optimization:
  Direct the design and optimization of complex analog circuits, leveraging advanced schematic capture and simulation tools to achieve superior performance and reliability across diverse operating conditions.
• Drive Digital Standard Cell Library Development:
  Oversee the creation of high-performance, low-power digital standard cell libraries, ensuring alignment with stringent performance, power, and area specifications.
• Innovate Cutting-Edge Cell Architectures:
  Develop and implement advanced digital standard cell architectures, introducing innovative solutions to enhance design efficiency and meet evolving technological demands.
• Guide Layout Implementation:
  Provide strategic oversight to layout teams, ensuring accurate, efficient, and manufacturable physical implementations that adhere to performance and reliability goals.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s/Ph.D.) strongly preferred.
• Experience:
  10+ years in analog design and digital standard cell development, with expertise in deep sub-micron process technologies (12nm and below) and proven tape-out leadership.
• Advanced Technical Skills:Deep expertise in analog design, power optimization, and noise analysis.
  Mastery of tools such as Cadence Virtuoso, Spectre, and HSPICE for design and simulation.
  Extensive experience in digital standard cell library creation, optimizing for power, performance, and area.
  In-depth knowledge of deep sub-micron challenges, including layout optimization and power delivery strategies.
• Leadership and Communication:
  Demonstrated ability to lead cross-functional teams, mentor junior engineers, and foster innovation. Exceptional communication skills to articulate complex concepts and align multidisciplinary teams toward common objectives.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• Kaki Bukit (East)

Your Responsibilities: -

• Generate mechanical drawings
• Coordinate with customers about requirements and feedbacks
• Ensure drawings are in correct specification and requirements
• Follow-up of assembly and installation work

You will need: -

• No experience required, traning provided

Apply now or email to [email protected]

Good luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 Recruit Lync Pte Ltd 22C1000

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

• Build blazing fast page speeds
• Build reusable components/primitives
• Delightful user interactions and affordances
• Work with the team to review PR, and make the codebase robust.

Job Requirements

• 5 years experience at tech startups with millions of DAUs
• Solid knowledge of TypeScript, and experience with Next.js, etc.
• Basic backend skills with Node.js, building REST APIs, working with databases
• Knowledge in Bitcoin and mining concepts
• Strong written and verbal communication skills

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

Physical Design Engineer (Digital IC)

Job Description：
1. Works with the senior physical design team to complete the chip floorplan , clock architecture, and powerplan .
2. Involved in one or more physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.
3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:
1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science
2. 0 - 5 years of work experience in the digital backend design field. (Fresh graduates can be considered).
3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.
4. Willing to work in a new start up entity in Singapore