Job Responsibilities

• Design, review and optimize piping layouts and detailed design to meet engineering and functionality requirement
• Prepare and review piping material specifications for compliance with ASME/Other relevant code requirements
• Coordinate / validate pipe stress analysis (Static and Dynamic Analysis)
• Provide recommendations for modification or validation of piping layouts
• Review / generate piping, support and isometrics drawings
• Review / generate steel structure drawings
• Generate piping/structural material take off list
• Review / generate and optimize facility layout and structural design
• Coordinate / validate design calculations according to project requirements
• Liaise with client, project managers in design works
• Provide value engineering proposals during tender and ongoing projects
• Coordinate and assist the project team regarding on site works
• Ensure site works are according to the design drawings
• Check through drawings and ensure drawings are according to the design calculation
• Prepare As-built drawings/calculation for submissions

Requirements

• Degree in Engineering in relevant MEP (mechanical, electrical and piping/plumping) related discipline.
• Several years of job experience in design & engineering of process plants is preferred.
• Good sketching skills and ability to communicate thoughts and technical ideas concisely
• Good communication skills essential for team-based working.
• Highly motivated, proactive and willing to take on new challenges
• Good time management habits and ability to multi-task
• Analytical problem solving
• Proficient in MS Office, AutoCAD (Plant3d , Revit, Advanced Steel would be advantage)
• Coordination and alignment with structural drawings
• Understand and clarify client requirements

Research Assistant/Associate positions are available in the Information Systems Technology and Design (ISTD) Pillar, Singapore University of Technology and Design (SUTD). The candidates will conduct research in acoustic sensing and simultaneous localization and mapping (SLAM).

Interested applicants should send their CVs, transcripts, and representative publications to [email protected]. Successful candidates will directly work with Dr. Qun Song.

Qualification & Experience:

• Bachelor's (Research Assistant) / Master's (Research Associate) degree in Computer Science / Electrical Engineering / Mathathematics or related fields with good grades.
• Solid programming skills and prototyping capabilities.
• Research experience in sensing, signal processing, deep learning, robotics, SLAM, and related domains is advantageous.

We are seeking machine learning and image recognition specialist to join our project team. The ideal candidate preferably has the background in machine learning techniques and image recognition algorithms to solve complex problems and improve project outcomes. You will work closely with a multidisciplinary team to develop, implement, and optimize ML models that are critical to the success of our projects.

• Design, develop, and deploy machine learning models and image recognition algorithms tailored to project-specific requirements.
• Collaborate with cross-functional teams to understand project needs, gather, and analyse requirements, and deliver ML-driven solutions.
• Conduct data collection, preprocessing, and augmentation to create training datasets.
• Implement and optimize image recognition models for accuracy, efficiency, and scalability.
• Evaluate model performance using appropriate metrics and make necessary adjustments to improve outcomes.
• Stay abreast of developments in machine learning and image recognition fields to incorporate cutting-edge technologies and methodologies into project solutions.
• Document model development processes, algorithms, and performance metrics.
• Provide technical guidance and mentorship to team members on machine learning and image recognition best practices.

Required/Desired Skills

• Experience in machine learning and image recognition, with a strong portfolio of project work that demonstrates expertise in these areas.
• Proficiency in programming languages such as Python, and familiarity with ML libraries (e.g., TensorFlow, PyTorch) and computer vision libraries (e.g., OpenCV).
• Experience with deep learning architectures (CNNs, RNNs, GANs) specifically designed for image processing tasks.
• Analytical skills with the ability to solve complex problems independently and as part of a team.

Required/Desired Qualifications

• Bachelor’s or master’s degree in Electronics & computer science, Artificial Intelligence, or a related field.

Experiences

Minimum 3 years’ experience in machine learning and image recognition within a technology/research organisation. Fresh graduate with relevant knowledge and skills will be considered.

Research Fellow positions are available in the Information Systems Technology and Design (ISTD) Pillar, Singapore University of Technology and Design (SUTD). The candidates will conduct research in acoustic sensing and simultaneous localization and mapping (SLAM).

Interested applicants should send their CVs, transcripts, and representative publications to [email protected]. Successful candidates will directly work with Dr. Qun Song.

Qualification & Experience:

• Doctoral degree in Computer Science / Electrical Engineering / Mathathematics or related fields with good grades.
• Solid programming skills and prototyping capabilities.
• Research experience in sensing, signal processing, deep learning, robotics, SLAM, and related domains is advantageous.

We have several available postdoctoral and research assistant positions at the Singapore University of Technology and Design (SUTD) to work in the area of Robotics. This position focus on supporting the design of algorithm for various robotics applications.

Qualification:
- Relevant Degree in Electrical Engineering, , Mechanical Engineering, Robotics, or related areas
- Strong hands on experience Preference will be given to those with prior robotics project experience such as:
1) SLAM;
2) ROS;
3) Sensor fusion;
4) Machine Learning;
5) Mobile platforms (eg: wheeled robots, legged robots); and
6) Manipulators

Applications, assembled as a single PDF file, should contain a complete resume, full list of publications, as well as the names and contact information of up to three references.

Interested applicants may send his/her CV to Assoc/Prof U-Xuan Tan via email ( [email protected] ). Review of applications will continue until the position is filled. Only shortlisted candidates will be notified.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

PROJECT MANAGEMENT

Interpret the customer’s requirements and translate them into proposal and conceptualization for new machine/equipment.

Liaise and follow-up with the customer on project proposal, subsequent project activities and development.

Responsible to monitor & follow-up on the project team comprising of project engineers & technicians, design engineers (both mechanical & electrical) to ensure a smooth work flow in the manufacturing & assembly process.

To lead & mentor project & design reviews with customer’s requirements & feedback on project matters.

Follow-up with vendors in the supply chain on matters related to the project.

DESIGN & DEVELOPMENT

To perform detail designs and critical drawings on time and upon the approval of the project manager, forward the designs to the respective vendors and suppliers for quotations & fabrication.

To lead meetings and review with the design team and the customers on design requirements and specification.

Being the mentor and to provide guidance to the team of design engineers, assistant design engineers in their job scope ranging from detailed designing, the selection of materials/standard items to the checking of drawings etc.

Draft machine testing protocol (especially for critical function) enabling the manufacturing team to test run the machine.

Ensure that all project documents, drawings and materials (soft & hard copies) are updated and appropriately documented and compiled accordingly.

SMART FACTORY TECHNOLOGIES & AI PLATFORM

To lead & team up with cross-disciplinary teams of engineers & specialist focusing smart factory technologies & projects.

To ideate and build robust data and digital technology driven solutions for advanced manufacturing / industrial processes.

To leverage AI and robotics-integration solutions to meet customers’ automation & real-time needs.

The duration of this Research Fellow position is from 2 January 2025 to 31 December 2025.

Job Description

We are seeking 2 Research Fellow (RF) positions to carry out research activities in a multidisciplinary topic to understand the physics of 2D materials based electric contact, photonics and electronics over a wide range of conditions. The activities include one or more of the following topics.

1. Multidimensional modeling of AC contact resistance for vertical and edge contact.
2. Quantum effects in Maxwell equations in nanometer scale dimensions
3. Quantum transport of 2D materials under light-matter excitation
4. DFT modeling of metal-insulator transitions at different temperatures
5. Photoemission and light-matter interaction of 2D materials

Job Requirements

Applicants for this RF position should have at least a PhD degree (within 3 years) in Physics, Applied Mathematics, Electrical Engineering or Material Science. The preferences are for candidates who have significant research experience with good publication records. The technical requirements are:

• Strong skill in mathematical modelling and numerical methods
• Strong in quantum mechanics, solid-state physics, and Maxwell equations
• Experience in using simulation software.

Job Title: Research Assistant (Design Innovator) in the Design Innovation team of SUTD

Description:
As a Design Innovator, you will play an important role in the successful realisation of DI projects and programs. Key components of the job are design competencies, in particular those involving users, user needs, conceptual design, prototyping, industrial design, analytical design, digital design, data-driven design, and user validation, and the ability to liaise with internal and external partners and stakeholders on a regular basis.

You will be part of the Design Innovation team and are expected to contribute to its vision, aims and programs - Design Education, Design Guidance, and Design Incubation – as well as design research, with an emphasis on Design Guidance. You are also expected to participate in SUTD events, support the organization, and support the work of other members of the DI team, as and when required.

If you imagine and dream of an employment opportunity with empathy, creativity, mindfulness, inclusivity, passion, autonomy, daring, and excellence in outcomes at its heart and soul, then this is the opportunity for you. Its realization depends on your willingness to embrace and grow boundlessly within these characteristics and mindsets.

Areas of Focus:

Design Guidance Projects

• Support and/or co-lead projects contributing industrial design, design engineering, systems design or product-service-systems development skillset.
• Mentoring and co-creating in innovation projects with public and private external partners and teams.
• Depending on background and skill sets, develop user experiences (UX), user interfaces, digital solutions, and data-driven solutions for and with external and internal partners.

Design Innovation Workshops and Education, Embedding Design

• Work with the DI Director to engage key stakeholders.
• Facilitate Design Innovation workshops and educational modules.
• Grow into role lead facilitator or co-lead for workshops.
• Develop Design Innovation content for delivery in workshops and education modules.
• Engage external partners to embed, catalyze, and grow design in their organizations.

Skillset:

Industrial Design:

• Develop concepts and prototypes for physical products, considering aesthetics, ergonomics, materials, and manufacturing processes.
• Conduct research on user needs, market trends, and competitor analysis to inform design decisions.
• Create detailed technical drawings and specifications for product development.

UX-UI Design:

• Design intuitive and user-friendly digital interfaces for web and mobile applications.
• Conduct user research, usability testing, and gather feedback to inform design iterations.
• Develop wireframes, user flows, and interactive prototypes to visualize and validate design concepts.
• Collaborate with software developers to implement UI designs with attention to technical feasibility.

Visual Communication Design:

• Create visually compelling graphics, illustrations, and branding materials that align with brand identity and target audience.
• Design marketing materials, promotional assets, packaging, and presentations to effectively communicate ideas.
• Ensure consistency and coherence in visual language across various platforms and media.

Adobe Suite Proficiency:

• Leverage your expert knowledge of Adobe Creative Cloud applications (Photoshop, Illustrator, InDesign, XD, etc.) to execute high-quality designs efficiently.

Others:

• Provide general support to the Design Innovation Team
• Undertake and perform other duties as assigned
• Be involved with partners in pre-workshop/project meetings, discussions and proposals

Requirements:

• You should possess a degree and have practical design experience in areas of relevance to Design Innovation.
• You should be able to work to strict deadlines, apply a user-centred design approach with rigor, deliver high quality studies, concepts and prototypes, and work on multiple projects in parallel.
• You must enjoy being creative and working with a variety of people, have a passion for design, not be afraid to take on challenging tasks, and eager to learn new competencies. The ideal individual will have strong written, visual and verbal communication skills.

About the Design Innovation Team

The Design Innovation team is a group of world-leading interdisciplinary designers, technical professionals, and researchers leading the world of design. The Design Innovation team functions to develop fundamental and ground-breaking results in design science as well as to fulfil the mission of a better world by design through a porous interface with industry, government, and social projects. This interface allows for a seamless integration of empirically grounded design methodologies that directly lead to outcomes with positive impacts at the social, media, and technological levels. The team is highly multi-disciplinary and leverages the ethos of a human-centred design approach with fundamental scientific studies in technology to create solutions to real world wicked problems, opportunities, and grand challenges.

JOB DESCRIPTION

· Discussion with system engineers on SoC architecture and feedback on optimization.

· Work on SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Discussion with synthesis engineer and back-end engineer on design optimization.

· SoC DFT support;

· SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Knowledge of ASIC design flow

· Experience in RTL coding, RTL and gate-level debug

· Understanding of DFT, timing and power requirements

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Knowledge on mixed-signal design would be an advantage.

JOB DESCRIPTION

· Discussion with system engineers on IP requirement and micro architecture.

· Develop IP (control path intensive or data path intensive) meet functional requirement and protocol standard.

· Support SoC designer on integration, timing constraints and power domain setting.

· Support IP verification for verification plan review, test case debugging.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience in IP development (either control path intensive or data path intensive)

· Knowledge of timing, DFT and power structure.

· Familiar with UNIX/ Linux environment and scripting

· Experience on communication IP and/or video IP development would be advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Experience on communication IP development would be an advantage

· Experience on video IP development would be an advantage

JOB DESCRIPTION

· Work with system engineers on timing requirements and feedback on optimization.

· Work on SoC timing constraint, synthesis and timing closure.

· Work on power structure, eg. Isolation of power domains, level-shifter crossing voltage domains

· Conduct formal verification for release comparison.

· Support back-end implementation on timing violation analysis and fix.

· Support scan insertion and optimization.

· Support on power structure and power optimization.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Familiar with ASIC design flow

· Experience in logic synthesis, static timing analysis, timing closure

· Good understanding of DFT and Power structure.

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

Requirements:

• BSEE or MSEE graduate from a recognized university;
• At least 7 years experience in Schematic Capture and PCB Layout Design using Altium Designer, or equivalent;
• At least 7 years experience in design-for-manufacturing in a manufacturing environment;
• At least 5 years experience in IPC-A-620 or IPC Class 3 or MIL Std;
• At least 3 years experience in embedded C programming.
• Experience in product development involving Environment Qualification Testing (EQT) and Environment Stress Screening (ESS) will be an added advantage;
• Electrical systems design and integration with a view of cable management for large format platform systems for high voltage or high current mobility;
• Design and troubleshoot multi-layered printed Circuit Boards
• Generate manufacturing standards Structured EBOM for manufacturing department;

Responsibilities:

• This is an Individual contributor position the requires hands-on board level design and system integration;
• Support design or product bring-up depending on if projects are ODM or OEM delivery model;
• Work closely with the R&D team (System Integration, Software/Firmware Engineers, Electrical Engineers, Mechanical Engineers)
• Identify Customer’s technical specifications.
• Plan the overall Architecture of the electronics board layout, systems layout, cable management for integration with mechanical and production department colleagues;
• Support Bid proposals, Lifecycle System Design Documentation, User Manual and User training, troubleshooting, failure analysis, field advisory role for site maintenance crew.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team, ISP Design leaders in other sites, and Digital System Design Team
• Leading, supervising and mentoring a team of RTL design engineers

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 7+ years of Digital Design and verification related experience
• 3+ years project management / people management experience / skill
• Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Ability to lead teams and collaborate effectively with people in different functions
• Strong time management skills to ensure timely completion of deliverables
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Supervior and Chinese Language Teacher

Chinese Language And Art School Pte. Ltd.Jurong,Bishan, West Coast, East Coast, Bukit Timah and Central RegionTeaching -

Primary & Secondary (Education & Training)

Full timeSGD 3800 - 9000

We have 7 branches island wide in Singapore and gained a good reputation in Chinese Language tuition industry. If you were a patient and responsible person with experience and passion in teaching, you are the one we are looking for.

The main requirements for this role are followings.

1.Familiar with local Chinese Language syllabus and experienced on teaching Chinese Language cross levels from Primary 1 to Secondary 4.

2.Be capable of writing and designing Chinese Language teaching materials.

3.With good communication skills to handle parent's enquiry and feedback.

4.Be able to conduct presentation(s) in Seminars/workshops/Parent-teacher meeting

5.Good commitment on assigned job and be accountable to student'slearning outcome

6.Being passionate on teaching and supportive on team work

华艺书院成立于2003年,目前在全岛有七家分校区，专注于本地中、小学华文补习与辅导。我们的班级设置从学前到中学四年级，在小六会考和O水准会考的备考辅导方面成绩斐然。我们拥有一支优秀而专业的教师团队，现由于校区拓展计划，需要招纳多名优秀的教师加入华艺团队。如果您是一位有经验的、对教学充满热忱、富于耐心和爱心，又具有责任感和团队合作精神的教师，那您，就是我们要寻找的人！欢迎加入，待遇从优！

岗位职责和要求概述：

1.熟悉本地教育系统，能教授中、小学华文辅导课程；

2.了解本地学校华文教材，有能力修订和补充华文教材；

3.具有良好的语言沟通能力，和学生、家长建立良好的关系；

4.工作态度踏实认真，对本职工作有很强的责任感；

5.适应能力强，可以很对融入团队并配合工作；

6.工作积极主动，有很强的市场开拓能力

Responsibilities:

• Review and maintain Safety Management System, Safe Work Procedures, and Risk Assessments.
• Identify improvement areas and monitor implementation of recommended measures through site inspections and team engagement.
• Collaborate with teams to plan, implement, and maintain effective WSHE work plans.
• Investigate WSH infringements and industrial accidents, recommending preventive actions.
• Handle incident reporting, investigations, and propose corrective measures.
• Conduct internal audits to ensure compliance with ISO 9001, ISO 14001, ISO 45001 standards, GGB, ConSASS, and Bizsafe.
• Liaise with relevant authorities on WSH issues.

Requirements:

• Registered WSHO & ECO Officer
• At least 5 working experience in construction industry (design & build/industrial warehouse)
• Working experience with A1 or A2 construction company.

___________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team, ISP Design leaders in other sites, and Digital System Design Team
• Leading, supervising and mentoring a team of RTL design engineers

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 7+ years of Digital Design and verification related experience
• 3+ years project management / people management experience / skill
• Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Ability to lead teams and collaborate effectively with people in different functions
• Strong time management skills to ensure timely completion of deliverables
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

Responsibilities:

• Review and maintain Safety Management System, Safe Work Procedures, and Risk Assessments.
• Identify improvement areas and monitor implementation of recommended measures through site inspections and team engagement.
• Collaborate with teams to plan, implement, and maintain effective WSHE work plans.
• Investigate WSH infringements and industrial accidents, recommending preventive actions.
• Handle incident reporting, investigations, and propose corrective measures.
• Conduct internal audits to ensure compliance with ISO 9001, ISO 14001, ISO 45001 standards, GGB, ConSASS, and Bizsafe.
• Liaise with relevant authorities on WSH issues.

Requirements:

• Registered WSHO & ECO Officer
• At least 5 working experience in construction industry (design & build/industrial warehouse)
• Working experience with A1 or A2 construction company.

___________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

About the Role:

We are seeking a highly motivated Research Assistant to join our interdisciplinary team addressing critical issues in advancing sketch prototype concept creation using Large Multimodal Models (LMMs). This role involves contributing to a groundbreaking project aimed at developing and studying novel means of interaction with state of the art LMMs that the research team will develop.

Key Responsibilities:

• Develop, refine, and deploy our sketching application
• Collect and analyse data from the prototype
• Collaborate with a multidisciplinary team to integrate LMMs into the sketching application.
• Help conduct empirical research, including designing studies, recruiting participants, and managing experimental data.
• Contribute to the design and development of interaction techniques for novel human-AI interactions.
• Support the team in writing research proposals, progress reports, and academic papers.
• Engage actively with project stakeholders to facilitate the adoption and implementation of research findings.

Qualifications, Skills, Experience

• Bachelor’s or Master’s degree in Psychology, Computer Science, Data Science, or a related field.
• Strong interest in rapid prototyping and human-AI interaction, particularly in LMMs.
• Experience in research methods, statistical analysis, AI and LMMs.
• Excellent organisational and communication skills.
• Ability to work collaboratively in a team environment as well as independently.

About the Role:

We are seeking a highly motivated Research Assistant to join our interdisciplinary team addressing critical issues in mental health using AI technologies. This role involves contributing to a groundbreaking project aimed at developing AI-driven tools for mental health support, with a focus on detecting and treating mental health disorders and distress through digital platforms.

Key Responsibilities:

• Assist in the development and refinement of algorithms designed to detect social communication patterns and signs of mental distress.
• Participate in the design and testing of AI models, including data collection, preprocessing, and analysis.
• Collaborate with a multidisciplinary team to integrate AI tools into social media and messaging apps to offer real-time mental health support.
• Help conduct empirical research, including designing studies, recruiting participants, and managing experimental data.
• Contribute to the development of empathetic conversational support systems facilitated by human-AI interactions.
• Support the team in writing research proposals, progress reports, and academic papers.
• Engage actively with project stakeholders to facilitate the adoption and implementation of research findings.

Qualifications, Skills, Experience

• Bachelor’s or Master’s degree in Psychology, Computer Science, Data Science, or a related field.
• Strong interest in mental health research and AI technologies.
• Experience in research methods and statistical analysis, preferably with exposure to machine learning or natural language processing.
• Excellent organisational and communication skills.
• Ability to work collaboratively in a team environment as well as independently.
• Prior experience in handling sensitive data and ethical considerations in mental health research is advantageous.