Job description

Permanent Part-Time Studio Admin

My Art Studio (www.myartstudio.sg) offers an array of creative of art programmes for children 3-12 years old, with a strong emphasis on having a holistic approach to creativity. Our art programmes are run in primary schools, childcare centres and in the studio. We also provide art jamming sessions for adults and events, as well as team-bonding through art for corporate partners.

We are looking for an independent, self-driven and resourceful individuals with warm personalities to join us as Part Time Studio Admin to assist in the administration work. You must be comfortable doing sales, speaking with customers and liaise with teachers.

**Only applicants who do not require work pass sponsorship can apply.**

Job Description

· Able to promptly and professionally attend to all walk-in potential customers and their incoming phone/email enquiries. Communicate effective and ensure closure for new prospective customers after they come for a trial lesson

· Establishing excellent rapport with parents, children and teachers

· Assist in overall support for operations, coordination and general office administration through a variety of tasks related to organization and communication

· Assist support in off-site art programs and events.

· Assist in the day-to-day administration of the Studio (roster, scheduling, payments, etc.)

· Assist in student enrolments (enquiries, registration, assessments, etc.)

· Assist in scheduling art classes to ensure optimal use of resources (classrooms, materials, etc.)

· Assist in regular and workshop facilitation and prepare the studio before and after workshops

· Assist teacher(s) with workshops when required

· Ensure the safety and appropriate behavior of students while in the studio

· Assist in the preparation of monthly report and update to Stakeholders

· Promptly update and maintain student system to ensure accuracy

· Maintain inventory list and manage/pack online orders

· Record keeping and basic accounting duties

· Maintain routine facilities management for Studio

· Any other duties as assigned by Studio Manager

Requirements

• Able to converse fluently in English and Mandarin
• Cheerful and sociable. Enjoy working around and communicate with young people.
• Excellent interpersonal and communication skills
• Meticulous, fast learner and can work with minimal supervision
• Team player who can function well both independently and collaboratively
• Independent, meticulous and able to produce quality work.
• Proficient in Microsoft Office especially in Excel and Word
• Prior experience in enrichment center with administration (Preferred)
• Have knowledge in Art (Preferred but not necessary)
• Higher Secondary/Pre-U/'A' Level, Diploma, Advanced/Higher/Graduate Diploma

Flexible working arrangement:

· Permanent part-time role

· Min 12 months commitment

· Min 2-3 working days in a week

· Able to work weekends and weekdays

· Between Tue to Fri: 10.30am to 7.30pm/8.30pm

· Between Sat and Sun: 9am to 5pm/6pm

· Location is in Serangoon Garden

Interested candidates please send your CV with below information:

· Personal details

· Educational qualifications

· Prior work experience, if any

· Date able to start

We regret only shortlisted candidates will be contacted.

Job Types: Part-time, Permanent, Fresh graduate, Freelance

Part-time hours: 10-20 per week

Salary: From $8.50 per hour

Benefits:

• Flexible schedule

Schedule:

• Day shift
• Evening shift
• Weekend availability

Supplemental pay types:

• Overtime pay

Experience:

• Administrative: 1 year (Preferred)

Shift availability:

• Evening Shift (Preferred)
• Day Shift (Preferred)

Looking for self- motivated individual to teach digital art daily in various locations in Singapore. This is a part-time position, maximum of 8h per week.

3 years work experience is prefered. Applicant must be able to teach procreate to students between 11-16 years old. In addition, applicant must also be able to teach basic flip book animation to students between 8-10 years old. Fees can be negotiated if applicant is able to assist the company with basic social media. Applicant who is also able to teach general art and craft to children between the 5-12 years old will be highly considered.

Applicant must be able to plan lessons and organize materials required for lessons.

We are Silicon Labs. We are a leader in secure, intelligent wireless technology for a more connected world. Our integrated hardware and software platform, intuitive development tools, unmatched ecosystem and robust support make us the ideal long-term partner in building advanced industrial, commercial, home and life applications. We make it easy for developers to solve complex wireless challenges throughout the product lifecycle and get to market quickly with innovative solutions that transform industries, grow economies and improve lives.

Meet the Team

The IoT Digital team is a state-of-art IC design team focused on producing world-class Wireless MCU SoCs. The architecture specification, design, verification, and implementation of the Wireless MCU SoCs is the responsibility of the IoT Digital team. These SoCs include an embedded CPU system with analog and digital peripherals, advanced security, state-of-the-art power management, and best-in-class radios to support a wide range of wireless IoT applications and standards.

As Senior Staff Verification Engineer, you will be working closely with the IC Design, System, and Architecture teams to develop and execute the verification plan for the next generation of IoT chips.

Responsibilities

• Block and IP Verification
• Block-level verification to validate block performance and adherence to requirements
• Generate and execute verification plan based on specifications
• Architect and implement test benches using UVM-based constrained-random and formal methods
• Coverage definition, implementation, and analysis
• Formal Verification of mixed-signal IP integration, including real-number modeling
• SoC Integration and Verification
• Define, test and debug use cases for the SoC
• Verify and debug low-power design
• Flows and Methodology
• Improve flows and methodologies to streamline IP development and integration.

Skills You Will Need
Minimum Qualifications:

• Min. 15 years of IC design experience for senior positions. Open to junior candidates with strong foundation.
• Industry experience developing test benches and verification components with SystemVerilog and UVM is required
• Knowledge of scripting/language (Python, PERL, shell, TCL)
• Design/Verification skills such as Software/Firmware coding (C), SystemVerilog Assertion and coverage analysis, Low-power implementation (UPF), Mixed Signal Real Number Modeling (RNM, Spice)

Benefits & Perks:
You can look forward to the following benefits:

• Employee Stock Purchase Plan (ESPP)
• Insurance plans with Outpatient cover
• Flexible work policy

Our Art Directors are visual storytellers. They create visual languages that make hearts skip a beat. They harness the beauty of design to get brands into places no one else can. Their art induces change, inspires action and invokes advocacy. Problem solvers, our Art Directors collaborate with our copywriters, strategists, media planners, technologists and public relations experts to champion unforgettable experiences through-the-line.

Qualifications

· Through-the-line advertising experience

· Strong understanding of digital and social platforms

· Great design skills, including layout, typography, video, design

· Ability to manage multiple projects at one time to meet deadlines

· High level of proficiency in Photoshop and Illustrator

Our Art Directors are visual storytellers. They create visual languages that make hearts skip a beat. They harness the beauty of design to get brands into places no one else can. Their art induces change, inspires action and invokes advocacy. Problem solvers, our Art Directors collaborate with our copywriters, strategists, media planners, technologists and public relations experts to champion unforgettable experiences through-the-line.

Qualifications

· Through-the-line advertising experience

· Strong understanding of digital and social platforms

· Great design skills, including layout, typography, video, design

· Ability to manage multiple projects at one time to meet deadlines

· High level of proficiency in Photoshop and Illustrator

Responsibilities:

Work in a fast-pace dynamic environment developing complex semiconductor equipment. This is a collaborative, multidisciplinary group focused on designing groundbreaking metrology products. Design state of the art mechanical sub-systems and perform first-principal analysis for sizing components. Release complete documentation package and work with the new product group to generate the necessary documentation.

Desired skills and expertise:

• Deep understanding of mechanics and physics
• Proficiency in CAD software, preferably CREO
• Deep understanding and proven expertise in Finite Element Analysis is required (Ansys/COMSOL), especially in structural, thermal, vibration and air flow analysis
• Good knowledge of GD&T in both part and assembly level
• Familiarity with manufacturing processes such as machining, welding, sheet metal forming and 3D printing
• Knowledge of precision machine design is an advantage
• Good communication and interpersonal skill, ability to collaborate with counterparties with diverse background
• Proficiency in both oral and written English

Minimum Qualifications:

• Doctorate (Academic) Degree and related work experience of 3 years; Master's Level Degree and related work experience of 6 years; Bachelor's Level Degree and related work experience of 8 years

KLA Singapore is seeking an outstanding System Design Engineer with physics/engineering background, to join the hardware and systems engineering team for design and develop state-of-the-art optical metrology system for semiconductor industry. As a key member of a multidisciplinary R&D team, the successful candidate will be expected to understand system-level function, performance & requirements, work closely with different parties, to support the business priorities and product development roadmap.

The job duties of System Design Engineer include but not limit to:

• Design, assembly, test, analysis, and characterization of optical systems, especially interferometry, illumination, and sensing systems.
• Conduct optical system architecture analysis.
• Conduct system error budget and specs allocation to each subsystem.
• Lead product prototype integration and its performance characterization.
• Develop and test on algorithms of interferometric data processing and image processing.
• Drive innovation in related fields such as optics and algorithm. Explore feasibility to adapt other technologies such as machine learning and data science.
• Document design, testing and diagnosis procedures to transfer the design to manufacturing.
• Support manufacturing and field service team on system/optics related escalations.

Requirements:

• Competence and passion in building advanced optical instruments (interferometer/microscopy/spectroscopy)or other scientific instruments, with comprehensive understanding in its physics.
• Solid knowledge of geometry and wave optics.
• Proficiency in common programing language for data analysis or modeling, such as Python/Matlab/C.
• Experienced in product prototyping: experiment design, test bench setup, error budget analysis.
• Systematic thinking with good sense of statistics.
• Good communication and collaboration, comfortable in working with multidisciplinary team and different functions.
• Good perseverance.
• PhD in relevant science or engineering fields. Preferably PhD
• Experience in optical system design is a plus.
• Experience in laser/camera qualification and characterization is a plus.

Minimum Qualifications:

• Doctorate (Academic) Degree and related work experience of 4 years

. JOB DESCRIPTION

Job Title

Carpentry production manager

Occupation

Supervisor and General Foreman (Furniture and Related Products Manufacturing)

Job Description & Requirements

Roles & Responsibilities

Must have at least 5 years experience

Must follow instruction and hard working and cooperative

Liaising with clients, suppliers and other construction professionals

Reading blueprints and designs to work to specifications prepared by other construction professionals, architects and building code recommendations

Starting from cutting and paste to build and install the finished carpentry work at the project site.

Good knowledge with the materials.

Good understanding of the drawings.

Good time management and teamwork spirits.

We are an equal-opportunity employer and value diversity among our teachers, staff and students.

At One World International School (OWIS), we are looking for passionate, adaptable educators who enjoy teaching students from diverse cultures. OWIS provides an individualised approach to learning that nurtures every aspect of child development. In addition to versatile learning spaces and a variety of extracurricular activities, we offer rigorous curricula that prepare students to be future innovators and leaders.

We are an IB Primary Years Programme (PYP) World School, a Cambridge International School and an IBDP School. All teaching positions require a high proficiency in spoken and written English, a degree, teaching qualifications and ICT literacy.

Newly-qualified Teachers are welcome to apply!

One World International School is committed to safeguarding and promoting the welfare of the children. We are committed to recruiting candidates who share this commitment to safeguarding. Before an offer is given, candidates will undergo child protection screening and will be required to provide a Police Verification Check from their country of residence.

If you are looking to work with enthusiastic students from around the world and become part of our dynamic school community, we invite you to submit your application for the following position.

Overall Responsibilities:

• Support the main classroom teacher in the implementation of daily programs to facilitate learning.
• Work with groups of students under the teacher’s direct supervision.
• Supervise the playing of educational games.
• Work with students who have varying degrees of learning support needs.
• Ensure that students adhere to the school’s behaviour policy.
• Prepare work and activities in accordance with the objectives set by the teacher.
• Assist the teacher in helping with the student’s physical needs, whilst also encouraging independence.
• Responsible for the upkeep of teaching resources, prepare art and craft materials, arrangement, appearance, decorations, and learning environment of the classroom
• Use positive discipline techniques at all times.
• Maintain and build relationships with children and parents.
• Being part of the team, you will participate in parents and community engagement activities.
• Give feedback to teachers on students’ progress.
• Any other related duties as requested by the Head of School.

Requirements:

• Be a passionate educator with the ability to deliver inquiry based learning.
• Creative and inspiring with loving energyDiploma/Certificate in Early Childhood.
• Care and Education preferred
• Prior experience in a classroom environment preferred.

Work Location: Punggol Campus

. JOB DESCRIPTION

Job Title

Carpentry production manager

Occupation

Supervisor and General Foreman (Furniture and Related Products Manufacturing)

Job Description & Requirements

Roles & Responsibilities

Must have at least 5 years experience

Must follow instruction and hard working and cooperative

Liaising with clients, suppliers and other construction professionals

Reading blueprints and designs to work to specifications prepared by other construction professionals, architects and building code recommendations

Starting from cutting and paste to build and install the finished carpentry work at the project site.

Good knowledge with the materials.

Good understanding of the drawings.

Good time management and teamwork spirits.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 3 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 3 years of ASIC design.
• experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 8 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterpart

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 2 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 5 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 5 years of ASIC design experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 5 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 8 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler), Photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Description:

• Plan and create content for online channels do not limit to social media, microsite, etc
• Develop pages, posts, and applications to appeal to the target audience
• Conduct in-depth social media research to develop various social media content like graphics, videos, and other forms of content to understand the Management needs
• Obtain input from Management Team to ensure that designs meet organizational standards and brand expectations, express ideas accurately, and represent the company or client appropriately
• Work independently as well as cooperatively with creative team to meet deadlines, stay within budget, and schedule project implementation based on workload, which may include five or more simultaneous projects
• Create a wide range of graphics and layouts for product illustrations, company logos, and websites with software such as photoshop
• Develop concepts by hand or with software, and execute original content by determining the ideal usage of color, text, font style, imagery, and layout
• Examine existing processes, identify flaws, and create solutions that improve design capabilities
• Review final layouts and suggesting improvements when necessary
• Stay up-to-date with new design techniques and software
• Any ad-hoc duties as directed

Job Requirements:

• Candidate must possess at least Diploma in Art / Design / Creative Multimedia / Computer Graphics or equivalent
• Minimum 1 years of relevant working experience, preferably with social media design experience
• Solid knowledge of image editing and digital sketching software, ike Photoshop, Indesign and Adobe Illustrator
• Meticulous, ability to multi-task and work within tight timeline
• Possess positive disposition, independent, resourceful and a team player

Main Duties & Job Scope

Daily Main

Monthly rolling Marketing Plan

Shopping Mall Tied-up

Maintenance of website store

Content Creation

Responsible for ensuring e-commerce platform is generating response and sales target

Monitoring of posts and engagement - boost ad

Liaise with partnered platforms to (new/promotional) products and sell through

Drive customer acquisition, retention and growth through digital marketing

seamless customer experience online

Day to day management of e- commerce clients and members

stay up to date with market, consumers and competitors

collect and connect working knowledge on the e-retailers

supports merchandising team on promotional activities and campaigns (Instore/Online)

Shop window plan and concepts

handle artwork and design of in-house marketing collaterals

liaise with printer and suppliers on project delivery

Submission of artworks for approval - even for marketing materials

Design artworks for social Media support & Simple POP

Need to handle graphic design for product development

Assist to response customers enquiries on FB and IG and online

Liaise with influencers

IG and FB Post

IG and FB shops

Improve display of PM Bisque

Monthly Promotion

-Full-time

-Passion in teaching children/adults on art principles and technique

-Conduct and facilitate teaching and guidance in individual or group settings

-Leading and teaching studio classes, school programmes with outdoor workshops and events

-Oversees our art teacher to ensure effective performance

-Management of Marketing for the studio

-Customer relationship management

-Sales growth of our Art Programmes, to help our business expansion

Job Requirement

- English and Mandarins spoken.

Bilingual abilities are a plus. (To communicate with Mandarin-speaking parents)

- Able to work on weekends with off days on weekday.

-Bachelor's Degree/Master's Degree

-Min 5 years in teaching experience

Brighton College (Singapore) is an exciting place to work, and it is our employees who make our community a vibrant and stimulating environment. The academic success of the Brighton College Family of Schools is due to excellent, innovative and well-planned teaching.

The school is looking to appoint a motivated, creative and energetic Teacher of Art & Music for August 2024.

ABOUT THE ROLE

• To teach according to the timetable for the current year, ensuring that lessons are planned, ordered and effective.
• To be aware of the need to differentiate work and challenges according to the ability of the pupils, whilst maintaining high expectations of all and taking full account of any linguistic or other special needs.
• To work as part of a team, in harmony with and for the furtherance of the College’s ethos and declared educational aims and priorities
• To be supportive of the department’s aims, agreed teaching styles, methods of assessment and other policies.
• To set written assignments or other creative pieces of work that involve a finished product (prep) regularly and mark them promptly and in accordance with College and Departmental policies, ensuring that formative comments are always helpful and make helpful suggestions for further appropriate improvement in learning.
• To provide parents with written reports on their children’s work and progress according to current College policy and to attend parent meetings.
• To take a share of boarding duties, invigilation and cover for absent colleagues
• To be responsible for the supervision, control and proper use of teaching rooms, materials and resources, and to have regard to health and safety issues and regulations.
• To attend InSET, Staff meetings, Key Stage briefings and other meetings that may be called from time to time, as required by the College's Academic Leadership.
• To report in a timely manner any concerns regarding Child Protection or bullying to the appropriate colleague. Be responsible for the pastoral care of the children in the class and ensuring good personal relationships are fostered between the children themselves and with the teacher.
• To take responsibility for one’s continuing professional development and, to this end, to participate in Development and Review procedures as directed by the College's Academic Leadership.
• To contribute to the College’s broad and active co-curricular activities programme.
• Undertake all duties and procedures as specified in staff handbook.
• To be a good role model in respect of speech, dress, behaviour and care of equipment.
• Meet with parents as required and foster good professional relationships and communication with parents, this includes but not limited to attending parents' evenings, school functions, Parent Association events and other evening/weekend events.
• Ensure that the parent portal is kept up-to-date and provides useful links for parents.
• To actively contribute to the Dance, Drama, Art and Music CCA programme.
• To work within an enthusiastic team and help drive the Art and Music teaching in the College to inspire and instill a love of these subject areas in the pupils.
• Attend department meetings and moderation meetings.
• Contribute to the Department’s devising and writing of new subject materials when required.
• This is not an exhaustive list of responsibilities, reasonable request may also be included.

PERSON SPECIFICATION

• Possess 2 to 6 years of teaching experience with a university degree and teaching qualification.
• Experience of teaching Art and Music lessons to the whole primary age range and EYFS.
• Have knowledge of National Curriculum requirements for Art and Music at the relevant Key Stages, and of writing lesson plans, developing resources and assessing students' work.
• Proven record of teaching experience, prior experience in independent Prep School will be an added advantage.

SAFEGUARDING AND EQUAL OPPORTUNITIES

Brighton College is committed to safeguarding and promoting the welfare of children and young people and expects all staff and volunteers to share this commitment. Any offer of employment will be subject to an enhanced DBS disclosure, / international Police checks, the receipt of satisfactory references, the College’s pre-employment medical question, relevant original ID documentation and examination certificates. The College understands that a robust, fair and transparent recruitment and selection policy plays a central role in achieving this aim.

The College is committed to ensuring that the recruitment and selection of staff is conducted in a manner that is systematic, efficient and effective and promotes equality of opportunity.

The College reserves the right to appoint a candidate to the role in advance of any deadline date, in the event that a suitable candidate can be appointed.

© Brighton College (Singapore) Pte Ltd

CPE Registration Number: 201904884D