Responsibilities:

• The Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification.
• It is also expected that you will conduct periodic design reviews, including with application engineers.
• It is also expected that you will support test development and product development teams in bringing projects to production.

Requirements:

• PhD/Master’s Degree in Electronics/Electrical Engineering.
• Minimum 6 years’ experience in Analog or Mixed-signal IC design.
• Very good knowledge of CMOS processes.
• Highly proficient in analog and mixed-signal IC design EDA tools.
• Experienced in analog and mixed-signal circuit designs, such as regulators, DC-DC converters, low-power, low-noise biasing circuits and amplifiers, sigma-delta modulation and ADCs, etc
• Experience in design of high resolution, low power sigma-delta modulation preferred.
• Experience in design of ultra low power ADC preferred.
• Skilled in laboratory testing of IC prototypes.
• Knowledge of Linux operating system required.
• Experience in MEMS interface ASIC design advantageous.

Start Date: to be discussed

Starting Pay: $10 - $12/hr (depending on your qualification. will be increased if you demonstrate good working attitude)

Able to commit at least 1 year

Roles & Responsibilities:

As an Art Teacher for Global Art program, your roles and responsibilities include:

Conducting art classes independently for students ranging from 3 to 15 years old using mediums such as oil pastel, poster colour, and acrylic.

Bringing fun and creativity to art education, encouraging students to be creative and innovative.

Maintaining the cleanliness and organization of the art studio.

Working as a team player with other teachers and staff members to ensure a positive and productive learning environment.

Demonstrating good communication and interpersonal skills, with fluency in English.

Working weekdays and weekends.

Following the terms of the contract, including a minimum one-year bond, attending training sessions without pay, and providing three months' notice for early termination.

Demonstrating a good attitude and commitment to the teaching hours, which may vary depending on the schedule of the classes.

Skills Requirements:

The skills and qualifications required for this role include:

N-level/O-Level/Diploma/Bachelor's degree in Fine Arts/Design/Art Education or related discipline.

Preferably 1-2 years of teaching experience, but not mandatory.

Cheerful, patient, and passionate about art education, with a genuine love for children.

Good drawing, colouring, and painting skills.

Ability to multitask and work independently.

Pleasant disposition and willingness to learn.

Availability to work on weekends.

Good command of English.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a Research Fellow who will be responsible for designing and implementing next generation communication and networking technologies and protocols.

Responsibilities:

• Design and develop communication and networking protocols related to resource allocation, channel access, security related protocols for 5G/6G environments;
• Perform analysis and simulations to validate designs;
• Assists with the editing and preparation of manuscripts, reports and presentations;
• Participate in presentations and demos for exhibiting work at appropriate events

Qualifications

Requirements

• PhD in Electrical Engineering, Computer Science or a related field;
• Programming experience and knowledge of machine learning would be a plus;
• Possesses research background with ability to read and understand methodologies in research papers;
• A good team-player;
• Open to Fixed Term Contract

Job Description:

• Plan and control the delivery of project design to ensure the achievement of quality, completion and project objectives.
• Select and engage, then monitor the performance of external design partners within the discipline including their deliverables, cost and timeframes.
• Manage the design approval process in accordance with project requirements and program
• Prepare budgets and schedules of design delivery for management approval then manage and report the cost of design delivery in the project life cycle.
• Manage design to ensure the cost of the works meets project requirements.
• Manage client and stakeholder expectations and communicate effectively with the project team.
• Select and develop design management staff within the project by providing leadership and mentoring to ensure their design management competencies.
• Understand design compliance and reporting procedures and processes and leadership in the communication of requirements.
• Foster the interaction between design and construction teams to maximise innovation and project success.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Good interpersonal, communication, and organisational skills
• Able to work well independently and as a team

Job Description:

• Plan and control the delivery of project design to ensure the achievement of quality, completion and project objectives.
• Select and engage, then monitor the performance of external design partners within the discipline including their deliverables, cost and timeframes.
• Manage the design approval process in accordance with project requirements and program
• Prepare budgets and schedules of design delivery for management approval then manage and report the cost of design delivery in the project life cycle.
• Manage design to ensure the cost of the works meets project requirements.
• Manage client and stakeholder expectations and communicate effectively with the project team.
• Select and develop design management staff within the project by providing leadership and mentoring to ensure their design management competencies.
• Understand design compliance and reporting procedures and processes and leadership in the communication of requirements.
• Foster the interaction between design and construction teams to maximise innovation and project success.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Good interpersonal, communication, and organisational skills
• Able to work well independently and as a team

Job Description:

• Plan and control the delivery of project design to ensure the achievement of quality, completion and project objectives.
• Select and engage, then monitor the performance of external design partners within the discipline including their deliverables, cost and timeframes.
• Manage the design approval process in accordance with project requirements and program
• Prepare budgets and schedules of design delivery for management approval then manage and report the cost of design delivery in the project life cycle.
• Manage design to ensure the cost of the works meets project requirements.
• Manage client and stakeholder expectations and communicate effectively with the project team.
• Select and develop design management staff within the project by providing leadership and mentoring to ensure their design management competencies.
• Understand design compliance and reporting procedures and processes and leadership in the communication of requirements.
• Foster the interaction between design and construction teams to maximise innovation and project success.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Good interpersonal, communication, and organisational skills
• Able to work well independently and as a team

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Report on work progress during meetings.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Report on work progress during meetings.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player

About Grab and Our Workplace

Grab is Southeast Asia's leading superapp. From getting your favourite meals delivered to helping you manage your finances and getting around town hassle-free, we've got your back with everything. In Grab, purpose gives us joy and habits build excellence while harnessing the power of Technology and AI to deliver the mission of driving Southeast Asia forward by economically empowering everyone, with heart, hunger, honour, and humility.

Get to know the team

The Fulfilment team's mission is to make Grab the platform of choice for Driver Partners by supporting them efficiently on and off the road. Our design team is divided into several empowered teams focused on creating an efficient app experience, ensuring fair and transparent earnings, and maintaining a healthy supply pipeline. We focus on creating solutions that are simple and delightful for our Driver Partners.

Get to know the role

As a Senior Design Manager on the Fulfilment team, you will report to the Head of Design and manage designers and UX writers who work collaboratively across multiple problem spaces. Your team will explore user and our needs to create impactful solutions that support our mission.

If you have a user-centric approach, excel in collaborative environments, and act decisively, the Grab Design team is the place for you. We're looking for design managers who can coach a growing team and help them positively impact how millions of people across Southeast Asia interact with Grab. This role is based in Singapore and is a hybrid role.

The Critical Tasks You Will Perform

• You will guide design outcomes, contribute to product strategy, and enhance design quality across teams.
• You will manage Product Designers, UX Writers, and UX Researchers working across several problem spaces.
• You will coach and mentor designers in solving complex and novel problems in simple and impactful ways.
• You will ensure design quality and superior user experience.
• You will work closely with Product Management, Engineering, Analytics, Research, Marketing, and senior leadership to deliver impact.
• You will promote complex thinking in a clear, convincing, and concise manner.
• You will develop and implement effective design processes.

What Essential Skills You Will Need

• 7+ years of Product Design experience..
• Extensive experience working on cross-functional product teams.
• Exceptional fundamentals in interaction and visual design craft and practice.
• Experience coaching and mentoring others in Product Design.
• Excellent knowledge of mobile and front-end web standards and development.
• Experience with Figma, Protopie, After Effects or other design tooling.
• Proficiency in Service Design, User Research, Front-end Development, Project Management, Accessible Design or Design Systems.
• Provide a portfolio of your recent design work in English, showcasing your contribution and the impact of your projects. We recommend you provide clear context, outline your end-to-end workflow, and demonstrate how you go from problem discovery to launch.

About Grab and Our Workplace

Grab is Southeast Asia's leading superapp. From getting your favourite meals delivered to helping you manage your finances and getting around town hassle-free, we've got your back with everything. In Grab, purpose gives us joy and habits build excellence, while harnessing the power of Technology and AI to deliver the mission of driving Southeast Asia forward by economically empowering everyone, with heart, hunger, honour, and humility.

Get to Know the Role

As the Head of Design, you will define and own design outcomes, product quality and co-own the product strategy for the team(s) that you are managing. You will partner with Product, Design and Engineering leadership in exploring the needs of our users and the business and driving the delivery of impactful experiences that drive our mission forward. You will shape the design practice by establishing the value of people-centricity, and getting buy-in for new product ideas and initiatives.

If you have a user-centric approach, embrace ambiguity and thrive in collaborative environments, then the Grab Design team is the place for you. We're looking for exceptional design leaders, with track records of growing highly autonomous and impactful teams, who can think strategically and act decisively, and who can help the team positively impact how millions of people across Southeast Asia interact with Grab.

You will report to the Head of Design. This is a hybrid role and its based in Singapore.

The Critical Tasks You Will Perform

• Define design outcomes, product quality and co-own product strategy.
• Lead design - managing Design Managers and overseeing multiple design teams, ensuring they operate cohesively and deliver high-quality work.
• Mentor and develop Design Managers, helping them advance in their careers.
• Collaborate with senior leadership to shape and scale the overall strategic direction and growth of the organization.
• Foster a culture of creativity, innovation, and collaboration within the design team.
• Propose, shape and drive initiatives that further the design organisation and its vision.
• Evangelise for and safeguard quality across the organisation - advocating for and establishing new standards of quality.

What Essential Skills You Will Need

• 7+ years experience managing high performing design teams.
• An online portfolio or case studies demonstrating user-centred design and leadership.
• Exceptional understanding of user experience design for the web and mobile.
• Extensive leadership experience on cross-functional product teams.
• Experience managing User Research, Service Design, UX Writing or Design Operations.

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Report on work progress during meetings.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Looking forward on your resume. Please drop your resume to [email protected].

Regret to inform you that only shortlisted candidates will be notified.

Design Project Manager - Bringing Creativity to Life with Efficiency

We are seeking a passionate and experienced Design Project Manager to join our team and lead the successful execution of exciting design projects from inception to completion. You will be responsible for overseeing all aspects of the project, from understanding client needs to managing delivery within budget and timeframe.

A Day in the Life:

• Client Relationship Management:

1. Collaborate with clients to clearly define their design aspirations and translate them into a formal design brief.
2. Facilitate seamless communication between the client and internal design team, ensuring client expectations are met and exceeded.
3. Proactively manage client expectations and navigate through any changes or challenges efficiently.

• Project Planning & Execution:

1. Develop comprehensive project plans using MS Project or similar project management software, outlining key milestones, timelines, and resource allocation.
2. Conduct regular meetings with client and internal teams to ensure clear communication, address design queries, and maintain project momentum.
3. Coordinate effectively with internal designers, landlords, architects, engineers, and other stakeholders involved in the project.

• Procurement & Tendering:

1. Identify and recommend qualified consultants to join the project team through a defined RFP process.
2. Assist the client in the tendering process, responding to technical queries, and clarifying project requirements.
3. Evaluate tender submissions, providing well-informed recommendations to the client for informed decision-making.

• Construction & Handover:

1. Facilitate regular stakeholder meetings throughout the construction phase, ensuring open communication and alignment.
2. Document meeting minutes for future reference and action tracking.
3. Manage client change requests, translating them into clear instructions for the project team.
4. Conduct regular site visits to monitor progress, oversee quality control, and address any logistical concerns.
5. Manage testing and commissioning procedures for project readiness.
6. Coordinate final inspections with landlord, consultants and contractors to ensure project compliance.
7. Prepare punch-lists and diligently follow up with contractors to rectify deficiencies.
8. Manage project close-out, including final accounts, handover documentation (as-built drawings, O&M manuals), and training sessions.
9. Oversee reinstatement and move management activities, ensuring a smooth transition to project completion.

What We Are Looking For:

• Minimum of 5 years of experience managing design projects in the Retail/Corporate industry. Junior candidates with demonstrably strong skills and relevant experience in design management may be considered.
• Proven track record of successfully delivering complex design projects on time and within budget.
• Excellent communication, interpersonal, and negotiation skills in both written and verbal formats.
• Strong organizational and time management abilities.
• Proven ability to prioritize tasks, manage multiple projects simultaneously, and adapt to changing circumstances while maintaining deadlines.
• Proficiency in design visualization software (e.g., AutoCAD, Revit), project management software (e.g., MS Project, Primavera), and communication tools (e.g., Microsoft Office Suite). Knowledge of BIM (Building Information Modelling) systems a plus.
• Experience with design procurement and tendering processes.
• Keen understanding of design constructability, able to identify potential constructability issues early in the design process and collaborate with designers to find solutions. Experience working with contractors and understanding how design decisions impact buildability and cost.
• Working knowledge of construction methods, materials, and regulations relevant to the industry. Ability to oversee construction activities, identify potential quality issues, and implement corrective actions promptly.
• PMP certification and/or LEED accreditation highly preferred. Demonstrates commitment to professional development and best practices in project management and sustainability.

We are inviting interested applicants who are good team players, enthusiastic, service-orientated, and professionally competent to join our dedicated team.

RESPONSIBILITIES:

1. Plan and deliver engaging, hands-on art lessons for elementary students in alignment with the school’s curriculum and learning objectives.

2. Introduce students to various art forms, techniques, and media, such as drawing, painting, sculpture, and digital art.

3. Foster an appreciation for art history and cultural diversity through lessons that incorporate artists, styles, and traditions from around the world.

4. Assess and evaluate student progress, providing constructive feedback to encourage improvement and creativity.

5. Organize and display student artwork in classrooms, hallways, and school exhibitions to celebrate their achievements.

6. Maintain a safe, clean, and organized classroom environment conducive to creative expression.

7. Manage art supplies and resources, ensuring availability and proper use.

8. Collaborate with other teachers and staff to integrate art into interdisciplinary projects and school-wide initiatives.

9. Encourage a positive and inclusive classroom atmosphere that supports all students’ artistic exploration.

10. Stay current on art education trends and best practices to continuously enhance teaching methods.

11. Maintain proper discipline in the classroom and on the school, premises utilizing teacher created discipline plans in conjunction with a school-wide discipline plan.

12. Employ a variety of instructional aides, methods, and materials that will promote best practices in order to reach the whole child, as stated in the ICS mission statement.

13. Lead Extra-Curricular Activities (ECA) for students to earn a minimum of three points of ECA credit. This includes planning, organizing, and supervising activities that enhance students' skills, interests, and overall development outside of the regular curriculum

14. Ensure Biblical Worldview Integration throughout the curriculum.

15. Complete lesson/unit plans, Atlas, ESO documentation, and PLC expectations within specified time frames.

16. Plan and lead a student Chapel when called upon.

17. Carry out supervisory recess duty as assigned (before school, break, lunch, after school).

18. Maintain regular and accurate attendance and grade reports that provide comprehensive information for each student’s learning progress. Inform the administration if/when unable to fulfill any duty assigned. Prepare adequate information and materials for a substitute teacher.

19. Communicate with parents, students, and other professional staff regarding student progress (behavioral and academic).

20. Demonstrate the character qualities of enthusiasm, courtesy, flexibility, integrity, kindness, self-control, perseverance, and punctuality.

QUALIFICATIONS:

● Bachelor’s degree in Art Education, Fine Arts, or a related field.

● Teaching certification (as required by state or district regulations).

● Previous teaching experience, preferably with elementary-aged children.

● Strong knowledge of art techniques, materials, and art history.

● Excellent communication and classroom management skills.

● Creativity, enthusiasm, and a passion for working with children.

● Maintain teaching credentials as required through sponsoring agencies (state/provincial education department, ACSI, etc.). Acquire and maintain teaching credentials as required by the laws of Singapore, NICS, and/or ICS.

PREFERRED SKILLS:

● Experience with integrating technology into art lessons.

● Familiarity with diverse learning needs and adaptive teaching methods.

● Ability to organize school-wide art events or projects.

· Service clients’ accounts and achieve sales targets

· Manage client’s expectations on project expectations

· Develop project execution strategy

· Obtain quotes from suppliers for materials/fittings for calculation of cost

· Prepare quotation and submission of tender/quotation

· Prepare project budgets and manage cost control based on clients’ budget

· Oversee kick-off meeting with clients

· Submit schedules, concept designs and sample materials for clients to review

· Update organiser/client on the commencement of work

· Coordinate with suppliers to ensure work is completed according to planned schedule

· Oversee handover of project and coordinate with clients regarding defects rectification

· Arrange for invoice billing to clients

· Ensure good client relationship and as primary point of contact for Clients' Project Management team

· Manage specialist design support services and take part in conversion process

· Perform any other adhoc duties

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

A research position is available at the Singapore University of Technology and Design (SUTD). The research focuses on semantic communications, resource allocation, and edge AI.

Candidates with strong publication records in relevant areas are encouraged to apply. The candidate should have:

• Bachelor’s / Master's degree in computer science or related degree
• Strong publication record in top-tier IEEE conferences/journals
• Proficient in oral and written English

Kindly note that only shortlisted candidates will be notified.

Project Overview

This research project aims to grasp dynamic changes in hotel capital investments and their influences on tourism-related local businesses before, during, and after the pandemic on two geographic scales -- region (Asia-Pacific) and city (Singapore). This aim is outlined by the following three objectives:

• Examining the significance of sustainable development attributes in explaining the spatial distribution of new hotel development projects across selected cities in the Asia-Pacific region;
• Estimating the influences of new hotel development projects on the establishment of tourism-small business enterprises within and around hotel districts in Singapore; and
• Drawing evidence-based policy implications along with specific measures for cities to rebuild and expand the capacity of urban tourism in the Asia-Pacific region and Singapore.

Job Description

The Research Assistant (one-year contract) will undertake the following research activities:

• Meeting with the principal investigator (PI) and team members regularly;
• Supporting the progress of key tasks;
• Collecting and organizing international hotel investment and other urban spatial datasets
• Visualizing multiple urban tourism, transport, environment, and economic attributes on a geographic information system (GIS) platform; &
• Developing hotel location choice and small business birth models
• Exploring new software applications for spatial data analyses.

This Research Assistant position will be arranged based on the Urban Planning & Economic/Environmental Policy Research Team, led by PI Prof. Jin Murakami, with support from the Humanities, Arts and Social Sciences (HASS) Cluster/Green Economy and Sustainability Initiative in SUTD.

Requirements

• Bachelor degree in Urban Planning, Environmental Studies, Economics, Business, Civil Engineering, Systems Engineering, Information Science, or related fields*
• Strong data management and quantitative analysis skills
• Proficiency with programing, coding, and/or statistical software (e.g., Python, R, STATA)
• Knowledge and experience of GIS software applications (ArcGIS and/or QGIS)
• Interest in data visualization skills – preferred
• Sufficient report writing and communication skills in English

To Apply

Interested applicants should email:

(1) a cover letter expressing specific interest in this position.

(2) a detailed CV with information on (i) education qualifications, (ii) working

experience, (iii) list of publications, (iv) name/title/contact of at least one reference, and (v) citizenship status.

(3) any writing sample to Dr. Jin Murakami at [email protected]. Subject should indicate: Full-time Research Assistant – Urban Tourism Research

We regret that only shortlisted candidates will be notified.

We have several available postdoctoral and research assistant positions at the Singapore University of Technology and Design (SUTD) to work in the area of Robotics. This position focus on supporting the design of algorithm for various robotics applications.

Qualification:
- Relevant Degree in Electrical Engineering, , Mechanical Engineering, Robotics, or related areas
- Strong hands on experience Preference will be given to those with prior robotics project experience such as:
1) SLAM;
2) ROS;
3) Sensor fusion;
4) Machine Learning;
5) Mobile platforms (eg: wheeled robots, legged robots); and
6) Manipulators

Applications, assembled as a single PDF file, should contain a complete resume, full list of publications, as well as the names and contact information of up to three references. Interested applicants may send his/her CV to Assoc/Prof U-Xuan Tan via email ( [email protected] ). Review of applications will continue until the position is filled. Only shortlisted candidates will be notified.

Job Description/Job Scope

1. Modeling of emerging data storage systems

2. Assist the development of channel coding algorithms and techniques

3. Implement the developed algorithms into Matlab and C/C++ software packages

Qualifications, Skills, Experience

1. A Bachelor degree in Electrical Engineering

2. Fundamental knowledge on Error Correction Coding, Digital Communications, and Signal Processing

3. Matlab and C/C++ programming skills

Job Description/Job Scope

1. Modeling of emerging data storage & communication channels and systems

2. Research and development of deep learning based channel detection and channel estimation techniques for emerging data storage and communication channels

3. Implementation of the developed algorithms into Python and Matlab packages

4. Working out research papers and patents

Qualifications, Skills, Experience

1. A PhD degree in Electrical Engineering

2. Fundamental knowledge on Machine Learning, Deep Learning, Error Correction Coding, and Signal Processing

3. Python and Matlab programming skills

4. Fluent in both written and oral English

Job Description/Job Scope

1. Characterization of emerging data storage & communication systems

2. Research and development of advanced channel coding algorithms and techniques, with a focus on polar coding

3. Implementation of the developed algorithms into Matlab and C/C++ software packages

4. Working out research papers and patents

Qualifications, Skills, Experience

1. A PhD degree in Electrical Engineering

2. Fundamental knowledge on Error Correction Coding, Polar Coding, and Digital Communications

3. Matlab and C/C++ programming skills

4. Fluent in both written and oral English

JOB HIGHLIGHTS

· Machine design in Mechanical aspect, Jig and Fixture, Equipment and development

· Provide Conceptual, mechanical part detailing and cost estimation

· BOM & machine manual writing

· Handle customers’ enquiries and issues

· Conduct machine acceptance with customer

· Co-ordination with sub-contractors for machine build

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

REQUIREMENT

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

· Able to work independently and within schedule

Job responsibilities

1. Responsible for Physical Design for Full chip/Blocks covering Floor planning, Placement, Area Optimization, Clock tree synthesis, Placement optimizations, Routing, Timing Closure, power network design, Voltage drop analysis, RC extraction, etc.

2. Be a highly-valued member of our start-up like team through excellent collaboration and teamwork with other R&D Engineers.

3. Work with Frontend team to understand the RTL design and drive physical aspects early in design cycle for physical design closure.

Job requirements

1. Bachelor's degree or above, major in Microelectronics / Electronic engineering / Communication engineering and other related fields.

2. More than 3 years working experience in layout and wiring of 40 nm and below technology.

3. Able to independently complete the whole chip P&R process and IR_ Drop, STA, low power inspection.

4. Familiar with TCL or Perl and other scripting languages.

5. Familiar with design flows and EDA tool software.

6. Familiar with Sign-off methodology and the use of EDA tool software in STA / power.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a highly motivated and skilled research scientist to join our team in the development of advanced materials through self-assembly techniques for selective ion capture and transport. The candidate will be responsible for designing, synthesizing, and characterizing sponges and membranes with tailored properties to facilitate the selective separation, capture and transport of specific ions.

• Design and conduct research on self-assembly methods for fabricating sponges and membranes with controlled porosity and surface chemistry
• Develop protocols for ion-selective capture and transport, focusing on optimizing materials for applications in filtration, water purification, and ion recovery
• Synthesize and characterize various materials, including polymers, hydrogels, and nanomaterials, to create functional sponges and membranes with desired selectivity
• Perform material characterization using techniques such sa SEM, TEM, FTIR, XRD, and surface area analysis to assess structural properties
• Evaluate the ion capture and transport efficiency of synthesized materials through experimental testing in simulated environments

Job Requirements

• PhD in Materials Science and Engineering
• Strong background in self-assembly techniques, membrane fabrication, polymer science, and nanomaterials
• Experience with material characterization techniques such as SEM, TEM, FTIR, XRD, and ion transport testing
• Demonstrated experience in ion capture, separation, and transport processes, with a focus on designing materials for selective applications