Job Description

• Prepare, manage, and facilitate design drawings utilizing BIM, Rino, Grasshopper and CAD technologies.
• Ensure all models are compatible and that BIM data is accessible to all project participants.
• Oversee coordination between architectural and structural interfaces, collaborating with main contractors and other trades for effective cross-team support.
• Work closely with the design team and other relevant departments to ensure all drawings meet design specifications.
• Manage design changes and revisions, addressing any discrepancies and queries between design and project teams.
• Attend site meetings as required and perform additional tasks as needed.

Requirements

• Degree in Architecture, Civil Structural Engineering, or a related field.
• Minimum of 4 to 5 years of relevant experience in construction and architectural projects.
• Proficiency in Revit, Navisworks, Rino, Grasshopper, AutoCAD, and MS Office.
• Knowledge of DGN, DWF, IFC, and MicroStation is a plus.
• Strong project management and decision-making skills.
• Ability to work effectively as part of a team as well as independently with minimal supervision.

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

Job Description & Requirements

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices.

Requirements:

• Possesses at least 7 years of experience in design and construction.
• Minimum Degree in Civil Engineering from accredited Universities.
• Experience in MRT & LTA projects
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.

Well versed in Autocad and BIM software is preferred

ONSITE JOB PROFILE

In this onsite role, the engineer is expected to perform the following tasks:

1. Support the customer in design concessions work by following applicable standards and working procedures.

2. Assist in providing design solutions for semiconductor components concessions. Semi conductor fab equipment’s components includes,

a. Power distribution units & Schematics review

b. Cable assembly design & BOM release

c. Support the assembly at manufacturing area.

d. Project schedules & Delivery.

3. Support in study of non conformance of concessions from design point of view.

4. Prepare drawing pack which includes all relevant assembly and components drawings.

5. Prepare design answer which includes solution for clearing the non conformance with appropriate sketches, recommendations and specifications.

6. Delivery of design assessment report for concessions.

7. Support manufacturing & assembly teams

REQUIRMENTS TO PERFORM THE JOB DUTIES

a) Bachelor of Engineering / Technology (B.E. / B. Tech: equivalent to BS) in Electrical Engineering.

b) 6-10 years of experience in Electrical Testing design and ECO coordination.

c) Knowledge of AutoCAD , PLC and cable design

d) Desire for continuous education and training effort.

e) Excellent written and verbal communication skills and ability to interact with all levels within engineering organization.

This is What You Will do in This Role:

• Review and understand sales solution requirements
• Co-ordination and preparation of inputs for systems proposals including designs, layouts, costs, schedules and technical documentation to meet submission deadlines.
• Identification and evaluation of controls, safety and IT (WMS and WCS) requirements and considering them in the layout design.
• Understanding the customer’s operation and considering them in the layout design.
• Identification and evaluation of opportunities for alternatives, design innovation and differentiation.
• Calculate machine and conveyor performances by applying application rules.
• Sourcing information and quotations from other departments, internal product centres and external suppliers for equipment & services and to ensure all quotations are technically and commercially sound.
• Liaise closely with Dematic product & knowledge centres and external suppliers for pricing and technical information.
• Ensure designs are properly optimized and all proposal cost estimates and associated inputs are accurate and competitively priced while maintaining technical integrity.
• Ensure solutions are technically sound.
• Identification of any technical project risks.
• Facilitate pre-sales design and costing reviews with key internal stakeholders (Sales, Engineering, Commercial)
• Ensure smooth and complete handover of proposals and tender submissions to engineering following project sale.
• Adoption and/or development & refinement Costing tools to improve the speed and accuracy of the costing process and in to ensure a meaningful format of presentation for other functions who will receive these as inputs.
• Keep abreast of solutions and technologies within the organisation and amongst competitors in the market
• Provide internal updates & presentations related to technical product/solution information
• Support sales with customer visits for technical discussions, clarifications and site surveys.
• Other tasks as assigned by the manager

What We Are Looking For:

• Degree in Engineering related discipline
• At least 3 years of experience in material handling / factory automation industry
• Experience using AutoCAD, knowledge of 3D design is of advantage
• System Design with Industry product and/or application knowledge in Logistics
• Automation controls knowledge is of definite advantage
• Advanced MS Office skills (Excel)
• Time management skills
• Communication skills
• Analytical thinking and strong numerical skills

Job Responsibilities

• To respond, follow up and complete design requests on time.
• To understand project requirements and produce designs for proposals and tenders, collaborating with Sales and Operations Teams to clinch projects.
• To take on special customized projects whenever required
• To ensure information are properly handed over to Sales and Operations Teams, in accordance to client’s requirements and ensuring all installation compliance
• To visit Clients with Sales/Operations team for presentations, networking etc.
• To assist Design Manager to perform any other related projects and duties as required.

Job Requirements

• Degree in Architecture or equivalent
• Preferably 2 years of working experience in design, landscape, architecture, or any related field
• Software Skill(s): Revit, Autocad, Lumion, Sketchup, Photoshop, 3Ds Max.
• Creative and has technical knowledge in basic construction design
• Able to create design concept and narrative for Design Proposals

Job Purpose:

The Design Manager will play a pivotal role in enhancing the unique style and personality of The Standard, Singapore. Working closely with the property and Corporate Design Team, you will support the property’s design initiatives, focusing on furniture, small construction projects, signage, maintenance of existing designs, and assisting in design development. Your creativity will be key to ensuring that every visual element aligns with The Standard’s vibrant and distinctive brand.

Duties and Responsibilities:

• Collaborate with Teams: Work closely with the Management Team to ensure that all spaces meet the specified standards and that public areas are always "in show" status.
• Maintain Design Integrity: Partner with Housekeeping, Engineering, and Food & Beverage teams to ensure that interior design standards are consistently met. This includes ensuring all rooms, displays, layouts, structures, signage, and event setups are visually up to par.
• Lead Property Tours: Conduct weekly property tours with department heads to report on active, pending, and completed projects impacting guest experience, ensuring they are aligned with brand integrity.
• Project Reporting: Assist in clear and accurate reporting of design projects across all departments, ensuring ongoing communication and understanding.
• Design Execution: Execute all design-related projects as specified by the corporate design team, including material sourcing, vendor selection, budget management, and creating maintenance manuals.
• Vendor Coordination: Schedule, follow up, and oversee outside vendor projects in a professional manner.
• Procurement and Inventory Management: Manage the processing and tracking of Purchase Orders, coordinate furniture placement, landscaping maintenance, and oversee tools and materials needed across the property. Maintain and organize inventory of all fixtures, furniture, and equipment on and off property.
• Support Marketing and Events: Collaborate with the marketing team on the physical and creative setups for activations and events, ensuring design consistency.
• Installations and Communication: Coordinate on-site installations and communicate work schedules with relevant departments.
• Material Sourcing: Source new and replacement materials for projects, whether locally, nationally, or internationally.

Skills and Qualifications:

• Bachelor’s degree in Interior Design, Architecture, or a related field.
• 2-4 years of interior design experience, preferably within hospitality or lifestyle brands.
• Strong project management skills with the ability to manage multiple tasks and meet deadlines.
• Proficiency in Adobe Creative Suite, Microsoft Office, CAD, SketchUp, and similar design software.
• Ability to read and interpret construction documents, floor plans, and understand spatial relationships.
• Knowledge of basic wood and metal finishes and general contracting terms.
• Excellent communication skills in English, both verbal and written.
• Highly organized with extreme attention to detail.
• Ability to work independently and as part of a team with a positive attitude.
• Adaptability and the ability to thrive in a fast-paced environment, meeting project needs and expectations.

Job Description
As a Design Engineer, you will report to the Senior Design Engineer and be responsible for the successful implementation and management of BIM processes in the construction field, specifically focusing on Building Services, Airconditioning, and Mechanical (M&E, ACMV) works. You will collaborate closely with the design department to ensure compliance with engineering and safety requirements and coordinate with stakeholders to maintain the integrity and accuracy of the BIM model throughout the project lifecycle.

Key Responsibilities

1. Construct and manage Building Information Models (BIM) with precision, ensuring the integrity and accuracy of all models. Ensure timely coordination and completion of tasks as assigned by the immediate superior.
2. Ensure all BIM models comply with project specifications and requirements.
3. Maintain and update the model library for all ongoing projects, ensuring that all data remains secure and is treated as company property.
4. Collaborate with project teams to collect site information for updating project BIM models.
5. Work closely with the Quantity Surveying department to provide drawings and information required for tendering, cost estimation, monitoring, and scheduling.
6. Coordinate with the BIM department to validate and confirm the accuracy of BIM designs.
7. Maintain, update, and manage hardware and software essential for the operation of BIM.
8. Assist in the creation of 2D AutoCAD drawings and ensure seamless integration between 2D and BIM models, bridging the gap between office and site operations.
9. Ensure all work conforms to the company’s ISO standards.
10. Support the submission of Operation, Maintenance, and Monitoring (OMM) manuals and media presentations using BIM models.
11. Follow the company's responsibility and authority matrix in the execution of duties.
12. Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes and standards, such as Singapore Code of Practice (CP13), SS553, and the Fire Code.
13. Utilize design software to perform thermal load calculations, energy modelling, and system sizing.
14. Prepare design documents including system layouts, schematics, and specifications.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills:Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage. Inexperienced candidates must be willing to learn, with training provided.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Key Responsibilities:

• Develop, manage, and oversee design drawings using advanced design tools such as BIM, Rhino, Grasshopper, and CAD technologies.
• Ensure the compatibility of all models and facilitate seamless access to BIM data for all project stakeholders.
• Collaborate with project teams to ensure design deliverables align with project requirements and standards.
• Provide technical support and guidance on design processes, ensuring accuracy and efficiency in project execution.
• Stay updated with the latest advancements in design tools and methodologies to enhance project outcomes.

Requirements:

• Proficiency in Revit, Navisworks, Rhino, Grasshopper, AutoCAD, and MS Office Suite.
• Familiarity with design file formats and platforms such as DGN, DWF, IFC, and MicroStation is advantageous.
• Strong analytical and problem-solving skills with attention to detail.
• Ability to work effectively in a team-oriented environment and manage multiple projects simultaneously.
• Relevant educational background in architecture, design, or a related field.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Description

• Design and implement computational / AI methods in Architecture, Engineering and Construction (AEC) domains;
• Research and prototype implementations of emerging digital technologies that can be harnessed in the AEC;
• Regularly document and explain decisions made in creating the prototype;
• Work in a team to actively contribute new ideas, technologies and insights regarding the development of AEC tech;
• Periodically attach to Architectural Design teams throughout the building design lifecycle to immerse in building design tasks to discover pain points and test solution prototypes;
• Schedule and organize user research / testing / feedback sessions.

Job Requirements

• Proficiency in Revit + Dynamo, Rhino + Grasshopper, or other parametric design software;
• Proficiency in Python, Typescript, C#/.NET;
• Proficiency in version control using Git;
• Experience in UI/UX.
  

Good to have Skills (in order of priority)

• Proficiency in Linux
• Proficiency in Containers e.g., Docker, Podman, Kubernetes
• Familiarity with the following:
• IFC (Industry Foundation Class) Spec
• APIs for Revit, Rhino, QGIS, Blender, SketchUp
• Web application development
• API development
• Experience in Ruby
• Experience in Databases such as SQL, MongoDB

We are seeking for a motivated Design Engineer specializes in the design, analysis, and coordination of building works in construction projects. These professionals work closely with architects, structural engineers, and construction teams to ensure compliance with design specifications, and collaborating with various stakeholders to achieve project goals.

Responsibilities:

• Prepare and complete precast shop drawings within specific time and in accordance with the project timeline.
• Check for accuracy and update amendments to precast shop drawings.
• Produce precast layout plans and fabrication shop drawings of precast concrete elements for production and submission to clients.
• Liaise with consultants concerning drawing details and technical issues.
• Liaise internally with production and suppliers on the submission/ issuance of shop drawings, highlight technical issues and keep them updated of any revisions.
• Incorporate on the drawings (2D and 3D) and update any amendment openings and recesses, architectural features, cast-in-items, lifting system and any other relevant details.
• Coordinate Structural, Architectural and M&E drawings to check and highlight any discrepancy and raise RFI to finalize precast shop drawings for production.
• Request any detail required for precast shop drawings.
• Check every detail and ensure precast drawings tally with construction drawings.
• Attend technical meetings with consultants/clients as and when required.
• Perform any other ad-hoc duties assigned.

Requirements:

· Bachelor's degree in Building/Civil Engineering or related as recognized by PE Board.

· Minimum 5 years’ experience in site planning and coordination works for building projects.

· Minimum of 3 years of relevant practical experience in Precast design for building works in Singapore.

· Familiar with both structural detailing (including rebar detail) and basic architectural detailing.

· Proficiency in software (e.g., AutoCAD, Revit, TELKA or All Plan).

· Excellent organizational and time management skills.

· Strong communication and interpersonal skills.

· Attention to detail and a commitment to quality.

· Ability to work independently and as part of a team.

Job Responsibilities

· Inform Design Team, Cost / Commercial team of all client-led change proposals and instructions.

· To manage local consultants in the execution of design development.

· To assist in coordination between Design Team, Consultants, Operator stakeholders.

· Assist site team in resolution of site clashes.

· Participate in workshops and lead, manage the consultants as required in review and comment of shop drawings in terms of constructability, sequencing and ensure quality of he design aesthetic is maintained throughout.

· Follow through on design development of Concept, Schematic, Development and Construction Documentation for all projects where applicable.

· To attend and review Mock Ups.

· Conduct site and factory visits to ensure implementation and compliance with approved design intent and direction.

· Interfacing with internal and external Operations Management to ensure timely incorporation of operational requirements within the project design.

· Manage the design change process to ensure minimal impact to project schedule and minimize cost impacts as a result of such design change.

· To assist consultants and design team to complete and resolve any unforeseen interface problems throughout the various Design Phases.

JOB REQUIREMENTS

• Minimum 8 year’s working experience in Architecture Design Management of Hospitality would be preferred
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Architecture, Interior Design or equivalent.
• Possess good communications and people skills
• Good organization, coordination and leadership skills
• Required skill(s): design development, project management, construction.

This role is responsible for technical specification and definition of industrial systems, products and solutions including system and product design, technical sourcing of such systems / products and digitization applications. This role defines regional product and system portfolios and create ways to fulfill such portfolio through local capability, partners and Envac AB HO & cross regional technical collaboration. This role actively interacts with commercial functions and customers to know the market trends and customer needs in order to fulfill such needs in a timely manner. This role protects ad define market position of Envac’s various product portfolio with strategic pricing schemes and drives the commercial team to achieve profitable growth with co-responsibility for profitability. The candidate will be reporting to the General Manager.

Key Responsibilities:

Products / Systems

Manage product life cycles including new products and accessory configuration update. Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements. Focus on Product and system Application Development for Southeast Asia and China. This is to broaden and differentiate Envac offers.

• The above scope includes technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design – (Have team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

-To attend technical review with sales team

-To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

-To attend coordination meetings with architects, M&E and structural consultants

-To coordinate and determine the level of pipe sleeve crossing under major roads

-To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc

-To determine the position and depth of launching pits that will aid the installation under major roads

-To study and highlight authority requirements during the meeting.

-To reply to HDB review form

-To reply to NEA BP, DC, WD Advise

-To produce preliminary drawings to aid the tender process for main contractor

-To prepare drawings for PWCS QP endorsement

-To prepare drawings for Acoustic Consultant’s specifications

-To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

-To attend technical meetings with main contractors

-To coordinate pipe clashes with M&E and structural services

Design Support

-To generate fabrication drawings for non-standard equipment

-To monitor project design submission schedule

-To allocate work assignments to other designers

-To check designs, shop drawings done by other designers

-To hold trainings to designers

Job Description & Requirements

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices.

Requirements:

• Possesses at least 7 years of experience in design and construction.
• Minimum Degree in Civil Engineering from accredited Universities.
• Experience in MRT & LTA projects
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.

Well versed in Autocad and BIM software is preferred

Responsibilities:

· Design and coordinate assigned Civil and Structural projects

· Perform structural analysis and design in building or on any structures as required by the project

· Liaise with clients & consultants to meet C&S requirements.

· Coordinate to ensure civil and structural requirements meet project tender, submission and construction schedule

Requirements:

· Good degree in Civil and Structural Engineering from a recognized University

· Minimum 1-2 year working experience in Civil & Structural consultancy firm

· Conversant with structural programs such as STAAD, TEKLA, ETABS, RAPT would be advantages

· Ability to work independently

· Candidate without the relevant working experience but with good academic results may be considered

You will lead the work on some of the most popular consumer brands in the world, impacting the daily lives of nearly 2 billion people in the fastest growing region in the world. You will work for clients who not only care about success in the marketplace, but are passionate about the role of brands in helping bring about social change.

Expectations of an Associate Creative Director

• Help lead and inspire creative teams to develop innovative design solutions, from broad concept development through implementation
• Ideate, write and execute original and iconic creative concepts in response to client briefs, objectives or goals
• Is responsible for the proper placement, context and meaning of every image and graphic element within a creative assignment
• Extend client relationships and explore new ways to deliver value
• Develop creative ideas that meets both our clients’ objectives as well as our business objectives, maintaining the company’s expected levels of creative excellence and professionalism
• Present, share and review creative work with Executive Creative Director/s, Account Management and Planning Leads as well as members of the Management Team
• Manage multiple projects from concept through to completion, working with both in-house resources and third-party vendors
• Collaborate effectively with Account Management, Planning and the broader creative team to develop disruptive and iconic work
• Manage multiple projects from concept through to completion, working with both in-house resources and third-party vendors
• Participants in, and leads brainstorming sessions
• You will report into a Creative Director-level and above

Expectations as a member of our community

• You believe passionately in the power of creativity to bring change to the world. But you’re realistic and have a clear-eyed view of what it will take to get there: not a path you walk alone, but with a group of people putting a diverse range of skills and perspectives to work, towards a common goal
• Your ideas and your voice will be heard, respected and protected with passion. Ideas are not disposable commodities here, they are our most precious assets
• You will be tested, you will be challenged and you will be pushed beyond your comfort zone, but you will equally be supported, encouraged and celebrated. Because the true value of a community is that we bring out the best in each other

Expectations as a team leader

You will learn that we prefer not to hire our leaders, but to grow them. As your own leadership journey evolves, your primary goal will be to nurture the next generation of leaders. You will reflect our “People First” ethos, where we believe that the best work can only come from a team that feels happy, secure and motivated, with a clarity of purpose. You understand that humility and kindness are equal in importance to daring and initiative. You value diversity, equality and inclusivity, not because it’s fashionable but because it’s obvious.

In your role, you will specifically be expected to:

• Provide leadership and professional development to department staff.
• Mentor and train team members, write performance reviews, and allocate work
• Monitor teams to deliver beyond client’s expectations
• Motivate your team, and be the glue that keeps teams going
• Set goals and KPIs for each team member, and works with them to achieve these

Special requirements

• You have about 10-12 years of work experience and a book brimming with brave ideas that have made an impact, big or small, on the world we live in
• You’re a keen student of life, open and curious, always learning
• As a communicator, every surface, every channel, every medium, social or otherwise, is your canvas. You’re just where people are
• You’ve won a few of the awards that matter. Winning isn’t everything, but excellence is
• Strong grasp of social media space and online media jargon and technology
• Ability to work under pressure and meet deadlines in a fast-paced creative environment
• Ability to effectively and appropriately interact with co-workers at a variety of levels, across many disciplines
• Understands and uses the latest in computer design software
• After hours work and overnight traveling to shoots and post sessions required
• Naturally well organised and unfazed when working towards deadlines

Do you enjoy interacting with people from all walks of life? Are you high-energy and get satisfaction giving someone a great memorable experience? Are you driven and looking to fast-track your career?

Motion Art Space is the original motion art experience in Singapore. We are a fast-growing startup that has been featured in numerous media outlets, including Vogue, Straits Times, Time Out, and 98.7FM. We have over 1,300 5-star reviews on Google; collaborated with brands including Rolls-Royce and Roger Dubuis; and have hosted teams from the Prime Minister's Office, Google, Hermes, and many more!

We are seeking a fun and driven individual to join our team with the following responsibilities:

• Amazing hospitality: Welcome and guide customers with high energy at our retail space
• Develop and implement standard operating procedures
• Maintain a visually appealing and well-stocked space
• Train and manage a team of part-time crew schedules and cultivate great team culture
• Work with the marketing and product team to implement campaigns and projects
• Mixing formulated paints and varnishing paintings (our space is a paint environment)
  

If you are:

• Fun and extroverted, and enjoys interacting with people and gets energy from events.
• Polite and patient to provide exceptional customer service.
• Passionate about art and creative experiences (no art background needed!).
• Able to manage your time responsibly and work on weekends and public holidays.
  

Here's what we provide:

• Salary: $2800-$3300
• Career growth opportunities. We are always looking for passionate individuals to join us long-term as we grow and expand.
• Friends & family discounts.

To apply, please submit your application or send your CV to [email protected].

Links

https://motionartspace.com/

https://www.instagram.com/motionartspace/

https://www.tiktok.com/@motionartspace/

https://www.linkedin.com/company/motionartspace/

At The Perse School (Singapore), we cultivate a happy and nurturing environment, inspiring students to develop a lifelong love of learning and prepare for a fulfilling and successful future.

To deliver on our mission of inspiring students to love learning, we embrace The Perse Way — a unique educational approach that places our values at the heart of everything we do. Developed over 400 years, The Perse Way guides us as we continually look forward, shaping an exceptional education for the future.

The Role

The Perse School (Singapore), is seeking a resourceful and forward-thinking Part-Time Art Teacher to join our dynamic team. The ideal candidate will inspire students to express themselves through art, fostering creativity, skill development, and an appreciation for various artistic techniques and styles. The Art Teacher will work closely with students of varying age groups and backgrounds, providing instruction that aligns with the school's curriculum and international standards.

Key Responsibilites:

• Plan and deliver engaging, age-appropriate art lessons for students across various grade levels.
  Introduce students to a variety of art forms and techniques, including drawing, painting, sculpture, printmaking, and digital art.
• Encourage creativity, self-expression, and critical thinking through hands-on projects and activities.
• Foster an inclusive and supportive classroom environment where all students can explore and develop their artistic talents.
• Collaborate with the academic team to ensure that the art curriculum aligns with school standards and international educational frameworks.
• Assess student progress regularly, providing constructive feedback and tracking individual development.
• Adapt lesson plans based on the diverse needs of students, ensuring lessons are accessible to learners with different backgrounds and skill levels.
• Maintain a positive, respectful, and well-organized classroom environment.
  Set clear expectations for behavior and work with students to manage their art materials responsibly.
• Ensure that all art supplies and equipment are stored safely and appropriately.
• Organize and participate in school exhibitions, art shows, and events to showcase student work.
  Promote the importance of art in the broader school community, including collaborating with other teachers and participating in interdisciplinary projects.
• Encourage students to appreciate and learn about global art movements, history, and cultural diversity.
• Stay updated with current trends in art education and explore new methods, materials, and technologies.
• Participate in relevant school meetings, workshops, and training sessions to continuously improve teaching practices.

Qualifications:

• Bachelor’s Degree in Fine Arts, Art Education, or a related field.
• Teaching certification or relevant teaching qualification.
• Prior experience as an art teacher, preferably in an international school setting (preferred).
• Strong understanding of various art techniques and materials.
• Ability to teach and engage students from diverse cultural backgrounds and varying levels of artistic ability.
• Excellent communication and interpersonal skills.

Desirable Skills:

• Knowledge of international school curricula.
• Experience with digital art or technology integration in the art classroom.
• Ability to organize art exhibitions or school art-related events.
• Creativity, patience, and a passion for teaching.

This role will commence in January 2025.

Start Date: to be discussed

Starting Pay: $10 - $12/hr (depending on your qualification. will be increased if you demonstrate good working attitude)

Able to commit at least 1 year

Roles & Responsibilities:

As an Art Teacher for Global Art program, your roles and responsibilities include:

Conducting art classes independently for students ranging from 3 to 15 years old using mediums such as oil pastel, poster colour, and acrylic.

Bringing fun and creativity to art education, encouraging students to be creative and innovative.

Maintaining the cleanliness and organization of the art studio.

Working as a team player with other teachers and staff members to ensure a positive and productive learning environment.

Demonstrating good communication and interpersonal skills, with fluency in English.

Working weekdays and weekends.

Following the terms of the contract, including a minimum one-year bond, attending training sessions without pay, and providing three months' notice for early termination.

Demonstrating a good attitude and commitment to the teaching hours, which may vary depending on the schedule of the classes.

Skills Requirements:

The skills and qualifications required for this role include:

N-level/O-Level/Diploma/Bachelor's degree in Fine Arts/Design/Art Education or related discipline.

Preferably 1-2 years of teaching experience, but not mandatory.

Cheerful, patient, and passionate about art education, with a genuine love for children.

Good drawing, colouring, and painting skills.

Ability to multitask and work independently.

Pleasant disposition and willingness to learn.

Availability to work on weekends.

Good command of English.

Overview

As a Design Engineer, you will assist the Technical Manager in all the designing, preparation, securing required legal documents for all the drawings (i.e.: shop drawings, structural drawings, architectural drawings and M&E drawings).

Responsibilities

1) Prepare and perform design for precast component according to client demand.

2) Responsible in the design and preparation of shop drawings and secure permits required by the government.

3) Review completed structural drawings, designs and specifications before issue for production.

4) Check and highlight all the discrepancies between Architectural, Structural and M&E drawings.

5) Co-ordinate with relevant parties on technical issues.

6) Plan & carry out production or service under controlled conditions – including product characteristics, work instructions / standard work methods, suitable equipment, Monitoring & Measurement (MM), release, delivery & post-delivery activities.

7) Ensure customer requirement are determined and met, thus enhance customer satisfaction.

8) Communicate to the organization the importance of meeting customer as well as statutory & regulatory requirement.

9) Establish the quality policy and objective.

10) Provide technical support for company operation.

11) Train, brief & supervise work and control process to work instructions / standard work methods and process plans.

12) Ensure planning & integrity of the Quality Management system (QMS).

13) Ensure Responsibility & Authority are defined & communicated.

14) Address customer satisfaction though the effective application of system, including processes for continual improvement and the prevention of non-conformity.

15) Conduct management review.

16) Ensure the availability of resources.

17) Determine, collect & analyze data for informed management decision.

18) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Bachelor degree in Civil / Structural Engineering or equivalent.

2) Minimum 3 years of relevant work experience in precast concrete industry.

3) Experience in creating 3D models of building element.

4) Prosses excellent problem definition / analytical and problem solving skills.

5) Strong verbal and written communication skills as well as excellent customer relation skills.

6) Able to work independently.

7) A team player with the ability to multi-task, prioritize and organize tasks.

Job Description

Primarily responsible to develop and conceptualize designs for commercial & residential projects

Must be able to generate layout plan and 3D perspective drawings in fast-paced work environment

Project coordination and design documentation

Project administration

Proficiency in Autocad, VRay, Sketchup, 3D Max & Photoshop and AI.

Must have creative mind in terms of commercial and residential.

Strong In Interior Design conceptualizations.

Good communication skills

Creative with a strong sense for colors and texture.

Pleasant working attitude, self-motivated, hardworking and passionate.

Working hours : 9.00am to 6.00pm (Mon-Fri) , 9.00am - 1.00pm (Sat)

Working days & hours: 5 days, Monday - Friday
Salary: SGD 3,500 - SGD 5,000
Location: Raeburn Park - Nearest MRT: Outram Park / Harbourfront

Responsibilities:

• Lead the print team and oversee development of work for consumer/corporate client campaigns and projects
• Conceptualising and proposing innovative print ideas (ATL/BTL)
• Oversee the day-to-day work of the design team and provide art direction guidance
• Experience work on several projects simultaneously

Requirements:

• Bachelor of Arts in Graphic Design, Fine Arts or equivalent from an accredited art/design school or university
• Min. of 3 years professional experience as an Art Director in print and design creative
• Proficient in all the Graphic Design software – Photoshop, Illustrator, InDesign, Freehand is preferably.
• Sound knowledge in print production process preferred

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Job Descriptions

• Develop and Review Test Plan based on IC design specification
• Develop constrained-Random verification environment for complex DUT
• Develop/Modify Testbenches using UVM/SystemVerilog for Pre-Silion IP or SOCs
• Implement coverage matrix using cover point and assertion
• Create and debug tests for DUT
• Resolve bugs with remote designers

Requirements

• Bachelor/Masters Degree in Electrical/Electronics/Computer Engineering with min 1 year of experience
• Hands-on experience in Silicon/ IP verification using SystemVerilog/ UVM
• Strong understanding of verification process from test plan to coverage completion
• Strong communication and Analytical skills
• Understanding of HDL (Verilog, VHDL)
• Experience with designing with FPGA using Vivado is a plus

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655
EA Reg No: R1109557 Rose

Hello, visual virtuoso! Havas Play, our Social, PR, Content and Experiential Events division of Havas Singapore, are seeking an Art Director to amplify our dynamic team. You'll have the opportunity to weave impactful stories across various digital and social platforms. Let your portfolio speak for your creativity – include a link in your CV.

Please note: We appreciate every application. However, only those shortlisted will be contacted.

Your Role:

• Work closely with client servicing and creative teams. Your journey will include concept ideation, development, and execution of creative assets, ensuring they resonate with client briefs.
• Collaborate with the teams in ensuring that all creative output aligns with brand and design guidelines.
• Maintain creative and brand integrity across all campaigns and projects, which includes the timely delivery of high-quality creative materials for various client accounts.
• Work seamlessly with internal teams and external production partners to facilitate the smooth execution of creative projects.

Your Arsenal:

• Minimum 3 years of experience in the Advertising industry, preferably within a bustling agency environment.
• Proficiency in art tools and software such as Adobe Photoshop, Illustrator, Premiere, and After Effects.
• Solid understanding of motion graphics and video editing is a plus.
• Knowledge of generative AI tools would be the cherry on top.
• Updated with content trends across major social media platforms (Facebook, Instagram, TikTok, LinkedIn).

What Makes You Stand Out:

• Keen eye for design aesthetics and an unquenchable passion for creativity.
• Interest in the ever-changing world of design trends and social/digital content formats.
• Mastery in conveying ideas effectively.
• Proactive, responsible, and team-oriented attitude is your strength.
• Stellar organisational skills and a sharp eye for detail.

Embrace the Possibilities:

Not entirely certain if you tick all the boxes? Don't let that hold you back. At Socialyse, we're not just seeking qualifications – we're after talent. We're building an environment where diverse perspectives, backgrounds, and skills flourish. If you're genuinely passionate about what we do and eager to learn, we invite you to step forward and apply.

About Havas Singapore

Within our Singapore Village is a network of business units including Havas Media, Arena Media, Havas Play, Socialyse, Red Havas, Havas Market and BLKJ Havas, offering services across media, social, PR, e-commerce and creative. Since 2015, we’ve had an unbroken streak of Agency of the Year (AOTY) wins across disciplines, including Integrated Marketing AOTY, Media AOTY, Specialist AOTY, and PR AOTY.

We are also committed to building a diverse culture where our people can grow, thrive, and feel that they belong. In 2023 and 2024, we won Best Agency Culture at Marketing Interactive’s Agency of the Year Awards, and are a Great Place To Work® Certified™ agency.

Here at Havas, we pride ourselves on being committed to offering equal opportunities to all potential employees and have zero tolerance for discrimination. We are an equal opportunity employer and welcome applicants irrespective of age, sex, race, ethnicity, disability and other factors that have no bearing on an individual's ability to perform their job.

Job Descriptions

• Develop and Review Test Plan based on IC design specification
• Develop constrained-Random verification environment for complex DUT
• Develop/Modify Testbenches using UVM/SystemVerilog for Pre-Silion IP or SOCs
• Implement coverage matrix using cover point and assertion
• Create and debug tests for DUT
• Resolve bugs with remote designers

Requirements

• Bachelor/Masters Degree in Electrical/Electronics/Computer Engineering with min 1 year of experience
• Hands-on experience in Silicon/ IP verification using SystemVerilog/ UVM
• Strong understanding of verification process from test plan to coverage completion
• Strong communication and Analytical skills
• Understanding of HDL (Verilog, VHDL)
• Experience with designing with FPGA using Vivado is a plus

Responsibilities:

Your main responsibilities include planning, designing and implementing building projects such as residential & industrial developments, commercial complexes, parks and other township development projects both in the local and overseas markets. You will produce high quality architectural designs and concepts and/or assist in the design work. You will liaise with the clients, other consultants and the local authorities and work with the relevant parties in the authorities' submission, project execution, co-ordination and on-site construction supervision.

Requirements:

• Masters/ Bachelor Degree in Architecture.
• At least 1 year of relevant experience in Singapore.
• Good project management, excellent communication and co-ordination skills, and great conceptualization and presentation skills.
• Strong flair for design using computer-aided design such as AutoCAD. Applicants with Revit/ArchiCad/BIM skills will be preferred