• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• Kaki Bukit (East)

Your Responsibilities: -

• Generate mechanical drawings
• Coordinate with customers about requirements and feedbacks
• Ensure drawings are in correct specification and requirements
• Follow-up of assembly and installation work

You will need: -

• No experience required, traning provided

Apply now or email to [email protected]

Good luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 Recruit Lync Pte Ltd 22C1000

Design Assistant

Your primary roles are to create 3D models for RISIS products (jewellery, lifestyle, and sculpture), to operate our Rapid Prototyping (RP) Machine, to do 3D scanning of RISIS products and to do any modifications on the 3D scanned models. You are required to work closely with the Designers (Sculpting, Jewellery & Lifestyle) to generate high quality 3D-printed models for visualization or production purposes. You must analyse, evaluate, and repair CAD models suitable for Additive Manufacturing. In addition, you may be tasked to design and model corporate gifts products to enhance your knowledge and skills so that you have a better understanding of the whole process from conceptualizing, developing, and producing premium gifts.

Key Responsibilities:

• To create 3D models based on 2D drawings.
• To be able to visualize, create and repair CAD files/data (.STL, .OBJ, .3DM).
• To generate 3D models as per specifications given, either by scanning or by using company-provided 3D modelling software within the required deadline.
• To generate 2D image renders for visualization based on 3D models.
• To operate and conduct regular maintenance of our Rapid Prototyping Machine.
• To liaise with suppliers on the purchasing of all necessary materials used for producing CAD models and other relevant 3D matters.
• To keep proper stock records, manage the sufficient supply and usage of all 3D related consumables.
• To keep a monthly maintenance logbook for the Rapid Prototyping Machine.
• To perform post-processes and provide high QC for 3D printed jobs.
• To maintain, update, and follow through 3D printing SOP to achieve the most optimal output and for the success of the 3D printing results.
• To perform preventive maintenance on the Rapid Prototyping Machine as and when needed to keep the machine always in ‘tip-top’ condition.

Other Responsibilities

• To support relevant sales department to do visuals for corporate project proposal.
• To co-ordinate and perform any tasks assigned by the Design Manager.
• To assist Designers with Design Order Form to relevant factories or suppliers when necessary

Requirements

• Diploma / degree in Fine Arts or related discipline.
• Preferably with 1–2 years of experience in similar capacity.
• Working knowledge of 3D design software packages.
• Ability to work well in a team.
• Meticulous and able to meet tight deadlines

• Design/design management/coordination of infrastructure projects related to underground structures, deep excavations, and or civil works.
• Ensure engineering deliverables meet client expectations and the basis of design.
• Liaise with Senior Engineers, QP and local authorities.
• Degree in Civil Engineering.
• Minimum 3 years of design/design management/design coordination experience.
• Interdisciplinary coordination experience will be an added advantage.
• Fast learner with high aspiration for professional growth.

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Senior Process Engineer – Wastewater Treatment Design

Our client is an expanding environmental solutions company specializing in industrial wastewater treatment, as well as water reclamation & recycling. With expertise in design & build, EPCC and O&M services, they’re now seeking a Senior Process Engineer to lead their team in the design, implementation and optimization of wastewater treatment processes and systems.

Job Responsibilities

• Coordinate with cross-functional teams, including design, construction, and commissioning, to ensure seamless project execution.
• Prepare technical specifications for treatment plant
• Provide engineering support for tender activities, bids and proposals, and prepare testing and commissioning plans
• Manage contractors and suppliers, ensuring adherence to technical specifications and safety regulations
• Lead continuous improvement initiatives to enhance the reliability and effectiveness of wastewater systems.
• Ensure that treatment plants comply with regulatory standards and operate efficiently

Requirements

• Minimum Degree in Chemical Engineering, Environmental Engineering or related field
• Possess process/mechanical design experience with wastewater treatment projects
• Must be willing to be hands-on to be on site occasionally
• Must be able to draw and review drawings (i.e. create process flow diagrams (PFDs), piping and instrumentation drawings (P&IDs), perform detailed calculations related to plant process design)

Location: West

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Design Team Leader/Senior Facade Designer

Need Engineering Jobs?

Visit https://ourengineers.com

Job Responsibilities:

• Lead and oversee the Design Team in executing facade design works.
• Plan and organize design tasks to meet construction schedule.
• Provide guidance and allocate work to team members, ensuring quality and productivity.
• Ensure that design deliverables, drawings, and other outputs meet required standards and specifications.
• Identify and communicate any additional work or variations to the Project Manager/Contract Manager for approval.
• Coordinate with Consultants, Main Contractor, and other parties involved in the project.
• Assist the site team in resolving site clashes and interface issues.
• Participate in workshops and lead the review and comment process for shop drawings, ensuring constructability and design quality.
• Manage the design change process, minimizing impact on project schedule and cost.
• Resolve unforeseen interface problems during different design phases.

Job Requirements:

• Essential skills: design development, design management.
• Advantageous knowledge and skills in Revit and Rhino; ability to read and extract information from 3D models in these formats.
• Excellent communication and interpersonal skills.
• Strong organizational, coordination, and leadership abilities.
• Minimum of 5 years of experience in facade design.

Need Engineering Jobs?

Visit https://ourengineers.com

• Print Art Director
• Creative Agency
• 5 days, Monday - Friday | 9.30am to 6.30pm
• Salary: SGD 4,000 - SGD 5,000 + Bonus
• Location: Outram Park / Harbourfront

Responsibilities:

• Lead the print team and oversee development of work for consumer/corporate client campaigns and projects
• Conceptualising and proposing innovative print ideas (ATL/BTL)
• Oversee the day-to-day work of the design team and provide art direction guidance
• Experience work on several projects simultaneously

Requirements:

• Bachelor of Arts in Graphic Design, Fine Arts or equivalent from an accredited art / design school or university
• Min. of 3 years professional experience as an Art Director in print and design creative
• Proficient in all the Graphic Design software – Photoshop, Illustrator, InDesign, Freehand is preferably.
• Sound knowledge in print production process preferred

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Good organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Main Responsibilities:

• Lead, motivate, and develop a team of Store Designers according to H&M Group values, business goals, and leadership expectations
• Support team members in reaching their full potential by actively working on development plans
• Ensure high-quality project deliveries and craftsmanship within the region, consistently meeting required timelines.
• Oversee project outcomes, providing feedback and suggesting enhancements through active coaching
• Set clear expectations for team members, effectively delegating tasks and distributing workload
• Foster strong collaboration between Central Functions, Brand, and Regions.

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Working location : Jurong Island

Job Description:

• Design review with other disciplines before submission for bidding.
• Client ITB documents and prepares clarifications and deviation list.
• Preparation of Piping Design calculations such as Piping Sizing, Pipe thickness, Pressure Drop etc.
• Preparing Pipeline list, Valve list, Equipment list, Instrument list, Specialty component list and initial MTO (For alloy steel), Final MTO (for metallic/Non-metallic piping, Valves/Specialty components).
• Detailed designing of piping systems including Hydro test, cleaning and Flushing concepts. Prepare piping specification (Piping class manual), standards and design instructions.
• Checking of all the output documents with respect of Work instructions and checklists for ensuring quality.
• Knowledge on Material selection and specifications as per international codes and standards (ASTM, ANSI, API).
• Basic knowledge of pipe stress analyses.
• Check and finalise isometrics and Supporting Drawings for erection purposes and release.
• Prepare sub-contractor construction scope of work for EPC/EPCM projects.
• Continuous site support if there arise any Piping, E&I, civil,construction and Installation enquiry.
• Other ad-hoc duties deemed fit and necessary by the company.

Requirements:

• Minimum of Degree in engineering disciplines
• Minimum 5 yearsof experience in the design and engineering field.
• Motivated, responsible with positive attitude and able to work under pressure.
• Willing to working in Construction site (Jurong Island).
• Knowledge of AutoCAD and Autodesk Revit is required.
• Knowledge of BIM Model will be an added advantage.

Job Description

Sea Forrest Engineering Pte Ltd (a subsidiary of BH Global Corporation Ltd) seeking a skilled and experienced Electrical Design and Commissioning Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing and commissioning complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Responsibilities

1) Electrical Design

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) Commissioning and Integration

• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.

3) System Optimization and Performance Enhancement

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

4) Documentation and Reporting

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.

5) Regulatory Compliance and Safety

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Requirements

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design and commissioning, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel to shipyards and vessels for commissioning activities.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focuses on developing the technology and demonstrating Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave circuits and subsystems.

Qualifications

• Possess a Bachelor or Master degree in Electrical Engineering
• Experience in the simulation and design of microwave circuits and subsystems.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.

Duties & Responsibilities

• To lead the Engineer team to carry out civil and structural engineering jobs in front end engineering design, detail engineering design.

• To assist discipline Manager in project civil portion manpower.

• To generate project specifications, design philosophy, calculation template to comply with clients’ requirement and local authority’s requirements.

• Civil project team manhour control, schedule control.

• To prepare foundation, structural or hydraulic calculation sheets, from simple to more complicated items, in accordance to project specifications, criteria and information. Ensuring correct and accurate calculations of loads and member sizes of structures. On average, a Civil Engineer II produces three simple foundation calculation designs a day or 1 structural calculation report a week.

• To prepare three-dimensional (3D) models and design drawings for structures and foundations as well as shop fabrication drawings.

• To supply design drawing information and instructions to Designers ensuring technical completeness and clearness of data for effective workflow.

• Usually prepares anchor bolt list and setting bolt list for client’s procurement purposes ensuring at least (+)/(-) 10% safety factor and meeting client requirements.

• Checks own design outputs and reviews design drawings to ensure accuracy and completeness to design requirements and concepts.

• May act as Assistant Key Person for small projects or NIDC projects.

• Coordinates with other Engineers and Designers to facilitate production of civil design and drawing outputs.

• Performs other functions that may be assigned by the Department Manager. Requirements

• Bachelor’s degree in Civil Engineering.

• Minimum of ten (10) years in the field of years plant engineering design and construction experience in Oil & Gas, Refinery, Petrochemical, Chemical, Pharmaceutical and industrial plants and consistent career experience in the engineering department Skill Requirements

• Ability to use computer equipment and peripherals to carry out routine computing tasks.

• Basic knowledge on STAAD, AutoCad and Micro station.

• Possess good communication and technical skills.

• Strong leadership qualities and analytical and reasoning abilities.

• Ability to read, analyzes, and interprets common technical information, contract reports and instructions.

A & One Precision Engineering was founded in 1992 and established itself as one of the leaders in the global precision engineering industry. A & One has leading technological capabilities in advanced manufacturing and currently serves customers in the Semiconductor, Aerospace, Medical Technology, Energy, Consumer Electronics and Telecommunications Industries.
As a Design Engineer, your responsibilities are:

• Support NPI (New Product Introduction) on product design and development.
• Oversee the design and documentation of components made from precision machined parts and sheet metal.
• Employ Design for Six Sigma (DFSS) tools to enhance design manufacturability.
• Conduct impact analysis to refine designs, ensuring they meet specifications, project timelines, and cost objectives.
• Participate in technical discussions and present design solutions to clients.
• Coordinate the fabrication, assembly, and validation of prototypes to ensure they meet specifications.
• Prepare drawing proposal and tooling design.
• Conduct tooling buy-o7 and hands-on tooling setup.
• Initiate and conduct the improvement project evaluation.
• Liaise with customer on design requirement and alignment.
• Liaise with factory on capability compliance.
• Responsible on tooling expenses and cost control.

Requirements:

• Min. Diploma in Mechanical Engineering/ Mechatronics Engineering/ Precision Engineering.
• Proficient in using Solidworks and/or other 3D modelling software
• Proficient in using CAD/CAM Programming
• Preferably with working knowledge and experience in tool & die, jig & fixtures design.
• Familiarity with Geometric Dimensioning and Tolerancing (GD&T) and Tolerance Stack-up Analysis.

Responsibilities

• Preparation of tender and contract documents including BQ
• Prepare and analyze costing for tenders
• Cost planning, estimation and measurement of quantities
• Assist in preparation of budget for M&E works
• Update M&E drawing
• Design drawing, design calculation
• Sourcing for sub-contractors and suppliers and price negotiation
• Support and tender multiple M&E projects concurrently
• Lead pre-tender meetings and brief team members’ duties during estimate preparation and submission stage
• Ensure tenders are well documented in a timely manner
• Coordinate with client and internal departments
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Mechanical Engineering (ACMV, Fire Protection) or related field
• Minimum 2 years of experience
• Familiar with tendering, project cost control in M&E works
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

• Machine design in Electrical aspect
• Perform single line drawing
• BOM & machine manual writing
• Conduct machine acceptance with customer
• Coordination with sub-contractors for machine build
• Posses strong leadership quality and be self-motivated
• Experience in Machine AC & DC (Control) design
• Good knowledge and experience in machine automation
• Degree / Diploma in Electrical Engineering
• Fresh graduates are welcome to apply

Benefits:

• Basic salary up to $10500

• 5 working days

• Better career growth & progression

Job Scopes:

• Collaborate with the front-end design team to finalize the chip floorplan, clock architecture, and power plan.

• Oversee the physical design process from Netlist to GDSII, including Place and Route (P&R), formal verification, static timing analysis, physical verification, power analysis, reliability design, and tapeout.

• Research and develop physical design methodologies for advanced process nodes and build automated platforms for physical design.

• Lead the implementation of physical design flows, ensuring compliance with design specifications and industry standards.

• Optimize chip layout for performance, power, and area (PPA) while ensuring

Job Requirements:

• At least degree in electronic engineering, microelectronics, computer science or relevant field

• At least five years of related working experience

To Apply, kindly click on the "APPLY NOW" button and job details.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Tan Pei Xuan (R24124430)

Piping Design Engineer

Salary Range: $2500 - $3500

Working Days: Mon - Fri (8:15 am–6 pm)

Office Location: Joo Koon

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Responsibilities

• Coordinate with internal team in Singapore liaise with customers / consultants on day to day basis
• Preparation of project documents including BQ
• Handling Design & Build projects
• Prepare optimised design solutions for projects
• Prepare Design drawings (Single Line Drawings & layout)
• Prepare design calculations incl voltage drop, short circuit current etc.
• Support multiple M&E projects concurrently
• Lead project meetings and work with team members to achieve the deliverables on-time
• Ensure drawings & documents are well maintained & stored in a timely manner
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Electrical Engineering
• Minimum 2 yrs of relevant hands-on M&E experience in construction industry, LTA projects, mixed development etc
• Need to be familiar with Singapore codes such as SS638 (CP5), SS650, SS555 etc
• Hands-on experience in AutoCAD drawings is preferred
• Familiarity in BIM (Revit / Navisworks) is advantageous
• Having consultancy experience is preferred
• Possess effective organizational and follow-up skills, meticulous
• Good communication skills
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

☑ Basic $4000 - $6000

☑ Permanent role + High Variable Bonus.

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm )

☑ Tampines

☑ Class 1 MNC Builder

Responsibilities

• Prepare and modify precast concrete drawings (schematic, detailed, and production) to meet local standards.
• Design 2D/3D drawings, perform basic calculations, and resolve technical issues.
• Collaborate with clients, consultants, subcontractors, and participate in design meetings.
• Support junior team members and assist with tasks as needed.

Requirements:

• Diploma or Degree in Civil Engineering
• Min 1 -3 years of related experience with Precast Concrete Shop Drawing

Interested applicants are welcome to apply online with updated Resume/CV via Apply Now button or send your updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492