• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• $3500 - $4200 + Transport Allowance + Variable Bonus

• Company located at Tai Seng

• Working hour: 9am – 6pm(Monday– Friday)

• Excellent Welfare & Benefits

• Well Established Carpentry Services Company

Job Scope

• Able to coordinate and guide the operations team through the renovation process, provide advice and support, and ensure that the projects are delivered to the best quality, on time and within budget.
• Responsible for direct customer communication from project planning to schedule to completion to ensure customer satisfaction.
• Establish core project management capabilities, including critical skills such as time management, budgeting, scheduling, site supervision, communication, customer service, quality control, safety, documentation and others.
• Work under time constraints to meet specific timelines.
• Ability to handle multiple projects and tasks.
• Communicate with our team of onsite carpenters and follow up with manufacturer's factory with issues that arise on site.

Requirement

• Diploma / Degree in Project Management / Interior Design / Architecture, or a related field.
• 1 to 3 years of relevant experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Senior/Design Engineer (C&S) (A1 main con, iconic building project)

Our client is a leading reputable A1 main contractor renowned for their impressive portfolio of iconic mixed development, residential and industrial building projects across Singapore. They’re embarking on an exciting new institutional building project in the CBD and are now looking for a Senior/C&S Design Engineer to join them during an exciting time in their development.

Job Responsibilities

• Provide technical expertise in the design and coordination of the civil and structural aspects of our construction projects.
• Work closely with project teams to ensure that all structural elements are designed to meet project specifications, regulations, and quality standards.
• Coordinate and liaise with relevant stakeholders to ensure the design complies with all requirement
• Prepare and present technical engineering reports, calculations, drawings, and specifications for project designs.
• Participate in the value engineering process to ensure cost-effective and efficient design solutions.

Requirements

• Degree in Civil/Structural Engineering, Construction Management, or related field
• Minimum 5 years of relevant building project/steel structures experience
• Possess knowledge of preparing construction sequencing drawings
• Experienced in resolving site issues too

Location: Central

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Print Art Director
Working days & hours: 5 days, Monday - Friday
Salary: SGD 3,500 - SGD 5,000
Location: Raeburn Park, Singapore (Nearest MRT: Outram Park / Harbourfront)

Responsibilities:

• Lead the print team and oversee development of work for consumer/corporate client campaigns and projects
• Conceptualising and proposing innovative print ideas (ATL/BTL)
• Oversee the day-to-day work of the design team and provide art direction guidance
• Experience work on several projects simultaneously

Requirements:

• Bachelor of Arts in Graphic Design, Fine Arts or equivalent from an accredited art/design school or university
• Min. of 3 years professional experience as an Art Director in print and design creative
• Proficient in all the Graphic Design software – Photoshop, Illustrator, InDesign, Freehand is preferably.
• Sound knowledge in print production process preferred

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Roles & Responsibilities

• To work as the Design Engineer to our LTA projects.
• To review of contractor’s Design and Construction submission and comment.
• To assist the SDE in the review of design submissions.
• To attend design meeting and all other relevant meetings as and when required.
• To give suggestion in construction sequence based on the design reviews.
• To follow PGI on rotational basis with the SDE.
• To review Shop Drawings and comment if any.
• To prepare Independent Design Reports.
• To visit site and review compliance with design requirements.

Requirements

• At least five (5) years of relevant experience on projects similar in nature to the Works in the Civil Contract.
• At least five (5) years in the design of structural and/or geotechnical works for deep excavation projects of a similar size and complexity.
• Experience in working in a structural engineering team within a large multi discipline project team.
• Experience in minimum facility platform design and including the substructure, topsides and bridges.
• Ability to meet agreed deadlines.
• Possess excellent interpersonal skills and ability to work as part of team.
• Familiarity of Singapore local codes & standards.

Interested applicants are invited to submit your updated resume, stating current/expected salaries to: [email protected]

We regret to inform that only short-listed candidates will be notified.

Responsibilities:

• Fully responsible for Netlist-to-GDS physical design implementation of low power chips

Requirements:

• Bachelor/Masters Degree in Electrical/Computer Engineering
• Experience in physical design with tape-outs
• Knowledge of complete Netlist-to-GDS flow, Synopsys/Cadence tools like ICC or Encounter
• Good in script programming with Perl, TCL/TK or other languages

Qualifications & Requirements

· Min 3 years of experience in automation operations with product design skills

· Able to manage existing Automation systems and improvements for new systems

· Strong in computer aided design, or CAD.

· Expertise in 2D/3D modeling and rendering.

· Knowledge of materials, manufacturing processes, and design for manufacturing (DFM).

· Excellent attention to detail and ability to manage multiple projects simultaneously.

· Able to demonstrate innovative past product designs through a portfolio or simple case studies

· Comfortable in structural analysis, or FEA

· Strong problem-solving and analytical skills.

Responsibilities :

· Operate, monitor, and maintain automated systems and machinery to ensure efficient production processes.

· Perform troubleshooting, repairs, and adjustments to automation equipment to minimize downtime.

· Optimize automation workflows to improve production speed, accuracy, and consistency.

· Collaborate with engineering teams to implement system upgrades and new automation technologies.

· Conduct regular inspections and preventive maintenance of automated systems to ensure optimal performance.

· Work closely with production, engineering, and marketing teams to align automation and product design goals.

· Document processes, designs, and system configurations for future reference.

· Provide training and guidance to team members on automation tools and product design methodologies.

Working Hours: Monday-Friday, 9.00 am - 6.00 pm

Working Location: Novelty Techpoint, Singapore 536212 (Bartley)

Salary: $2500 - $3000 + Commission

Requirements

• Professional Certificate/Diploma/BS/BA or a related field of study
• 3-4 years of experience in account management, preferably in interior design / creative-led industry
• Must be able to read and edit autoCAD, SketchUp and other design softwares and site work is required.

Responsibilities

• Assist Project Director to manage the accounts of creative-led projects.
• Acting as the primary point of contact for clients, ensuring that their needs are met and their questions are answered in a timely manner
• Developing project plans and timelines, and ensuring that all project milestones are met on time and on budget
• Coordinating with other departments, such as design and production, to ensure that all project elements are delivered on time and to the client's satisfaction
• Preparing and presenting project status reports to the client and internal stakeholders
• Identifying opportunities for upselling and cross-selling to existing clients
• Ensuring that all project documentation is accurate and up-to-date
• Conducting research on the latest industry trends and best practices to ensure that our company remains competitive and innovative

Low Jia Yi R22104302

The Supreme HR Advisory Pte Ltd 14C7279

• A1 Main Contractor
• 5.5 Alternate saturdays (South of Singapore)
• Building Project

Our client is in the Civil & Infrastructure Contractor and has a strong presence globally. They are looking to fill the role of C&S Design Engineer

Responsibilities:

• Prepare technical reports, designs, and detailed drawings.
• Perform calculations for pressures, loads, and stresses.
• Assess the strength of construction materials and select them appropriately.
• Provide expert advice on safe construction and design practices.
• Secure planning permissions and ensure compliance with building regulations.
• Analyze the configuration of essential structural components.
• Oversee and inspect contractor work to guarantee structural integrity.
• Inspect properties to assess conditions and foundational stability.
• Utilize computer-aided design (CAD) software for simulations and modeling.

Requirements:

• Degree in Civil or Structural Engineering.
• Professional registration with the Institute of Structural Engineers.
• Proven experience in project management.
• Advanced knowledge of construction techniques, materials, and legal standards.
• Strong grasp of physics and mathematics.
• Ability to collaborate effectively with other professionals.
• Exceptional attention to detail and excellent organizational skills.
• Ability to work efficiently under pressure and meet deadlines.
• Excellent communication skills and proficiency in IT.

OTHER INFORMATION:

• Location: South
• Working days: 5.5 Days
• Salary: Up to S$7,500 / Negotiable and Bonus (salary will be commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction by providing attractive staff benefits, welfare & training programmes to all staff.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, David , at 6590 9958 or 9271 7510 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

Job Descriptions:

• Position : HVAC Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $6,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Engaged in all mechanical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Participated in design and construction document preparation and submissions.
• Conducted technical review and clarifications with customer and suppliers.
• Coordinated design efforts with other engineering disciplines.
• Participated in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Monitor the progress of the document submission.
• Performed some drafting scope and also guide drafters for drafting.

Requirements:

• Minimum Diploma/Degree in Engineering or related field.
• Relevant job experience in oil and gas/process/marine industry preferred.
• Must have basic mechanical design knowledge.
• Proficient in performing HVAC cooling capacity calculations, pressure drop calculations, and duct sizing.
• Experienced in duct installation and HVAC system installation.
• Skilled in creating piping and instrumentation diagrams (PID), Airflow diagrams, and ducting and instrumentation diagrams (DID).
• Knowledgeable in basic pipe sizing, selection, and pipe installation.
• Familiar with basic fire suppression systems.
• Proficient in using AutoCAD for drawing and design.
• Proficient in MS Office applications.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Description

• Position: Senior Mechanical Design Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $7,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Responsible as the lead for the overall Mechanical engineering project activities.
• Responsible for optimized Mechanical engineering man hour utilization within the project.
• Coordinate between the other trades & internal for engineering integration.
• Coordinate with Project Lead on Project Engineering’s & Procurement Schedule.
• Prepare & Review Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities.
• Review Vendors’ Technical Specification/ drawings to ensure completeness & correctness with our requirement.
• Prepare & Review Equipment Parameter & Mandatory Calculation.
• Prepare & Review Piping Schematics (P&ID).
• Prepare & Review Machinery & HVAC Layout, Equipment Installation & Alignment.
• Prepare & Review Mechanical design and construction standard.
• Review 2D and 3D for piping detail and production design.
• Prepare & Review Testing Protocol & Operation Manual.
• Guiding and checking Mechanical engineer activities.

Requirements:

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of relevant work experience in marine/offshore industry machinery and piping new-building engineering design.
• Proficient in AutoCAD, Microsoft Office, and AVEVA.
• Knowledgeable about rules and regulations from Classification Society and Authorities.
• Familiar with the theory and calculations related to marine/offshore mechanical and piping design.
• Strong communication and analytical skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Responsibilities:

• Coordinate design and drawings with consultant
• Monitor and report on the progress of shop drawing production
• Work closely with Architectural and M&E teams, resolve issues on drawings
• Responsible in technical submissions for materials, construction methods, and C&S shop drawing

Requirements:

• Bachelor's Degree in Civil/Structural Engineering
• Minimum 2 - 3 years of working experience in construction industry
• Relevant design experience with contractor will be an advantageous
• Demonstrates independence with excellent analytical and interpersonal skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R24121656

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

- Create engaging social media content for our social media channels including Facebook, Instagram and TikTok

- Develop strategies for website enhancement

- Design marketing collaterals online and offline, and assist in sales team in creation of artwork for physical stores

- Collaborate with marketing team to develop marketing strategies and campaign

- Monitor and track social media metric to evaluate success of campaigns

- Stay up-to-date for social media trends

Requirements:

- Relevant diploma in Marketing/Art/Design courses' to 'Currently pursuing a Diploma in Marketing/Art/Design courses'

- Passion for marketing related design and content creation

- Proficient in graphic design software such as Adobe Photoshop, Illustrator, In-design, After Effects

- Excellent writing and communication skills

- Knowledge of digital marketing

- Positive attitude and willingness to learn

5days work week

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Strong organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Established in 2020, Riot Singapore Studio has been expanding our footprint in Asia and accelerating our talent growth to develop games that deliver great experiences to our players. Our mission is to “scale Riot’s games to hyper-serve players.”

We partner with our LA headquarters on game development for League of Legends, Teamfight Tactics, VALORANT and 2XKO. The Singapore Studio is seeking talented, passionate craft experts with backgrounds in all areas of game development to build games that make it better to be a player.

We’re focused on working together to promote individual autonomy, ownership, collaboration, and inclusivity, so everyone can be their best while we boldly pursue games.

That's where you come in.

As a Concept Art Lead in the Singapore Studio, you will channel your knowledge of concepting, modeling, and texturing to help tell stories through visually compelling characters, creatures, props and illustrations.

You’ll expand and support a high-performing external team and give them the guidance and context they need to deliver amazing concepts that set industry standards on craft, meet all technical requirements, and match the League of Legends art style.

Through a mix of craft training and hands-on leadership, you will level up the team’s craft, mediate and resolve craft disagreements and misalignment, and keep the team motivated towards creating excellent experiences for our players. Using your broad knowledge of art, craft, and technique, you’ll set clear goals for your team and make sure the process of delivering those goals is as smooth as possible for your team and their stakeholders.

You will partner closely with the product teams and other artists, ensuring that art quality is excellent and is able to effectively promote and align with larger products. You will maintain your craft skills, inspire creativity and keep a high-quality bar with hands-on work as you deem necessary.

Responsibilities:

• As an Art lead on the team, you will oversee and be accountable for the quality of the work the team delivers and set the bar for excellence
• You will build a world-class team by sourcing AAA Concept talent in China and developing and growing their concept skills through training and feedback
• You will establish and maintain a highly engaged, creative, and motivated workspace for your team to unleash people’s potential.
• You will be responsible for driving innovative ideation and design aspirational concepts to set up other disciplines for success.
• You will collaborate with Rioters in Singapore and worldwide to make sure product goals are fulfilled, and working practices are appropriate
• You will set a clear vision and strategy to grow your team, provide consistent feedback, and build trust with your team
• You will drive the concept development for 2D and 3D art products
• You will lead and improve team rituals to support high-quality craft and individual growth
• You will accomplish your mission with complete autonomy if needed; you're dedicated to vigilantly finding creative and effective solutions to eliminate complex problems.

Required Qualifications:

• Demonstrated experience working directly with an outsource vendor either as an Art Outsource Manager or as a Concept Art Lead
• 5+ years experience in the video games industry
• 2+ years experience of management experience
• Extreme proficiency in art fundamentals such as anatomy, composition, design, and color theory
• A clear understanding of the League of Legends art style
• Proven experience leading/mentoring teams and individuals. Growth minded and motivated toward teaching, enabling, and coaching other artists
• Experience giving thorough direction and delivering timely, clear, actionable feedback
• Strong background in concept art and a good understanding of technical limitations for 3D assets.
• A strong communicator and able to convey abstract/sophisticated ideas concisely in English or Chinese

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Are you a talent looking to build business skills, gain experience, and take on exciting challenges?

Grow your career with Trelleborg and start shaping the industry from the inside.

About the Job

Trelleborg Singapore is looking for an excellent Design Engineer to join the Research and Development team. Reporting to the Engineering Director, you will be responsible to finish the design, modelling & drafting work allocated to you by your seniors in an efficient and timely manner. This job will entail completion of 3D models and engineering drawings, maintaining work documentation and keeping all projects organized. The duties and responsibilities of the Design Engineer is not limited to those listed below and are subject to change as per needs of the business.

• Provide engineered design & engineering to clients from conceptual design till award of the project.
• Efficiency run and maintain innovative finite element analysis tools within Trelleborg Group and its associated companies.
• Innovative and creative to promote and launch new product line to increase market share and profitability.
• Key collaboration with Sales & Marketing, Procurement, Technical, Production and customers to achieve agreement and clarification for new product design specifications. Implement work in accordance with applicable project procedures and standards.
• Establishment of the design work requirements for submission. The design work are drawings, engineering data sheets, design & engineering specification solution documents.
• Review design work together with the FEED design consultants/engineers and ensure that in order for submission.
• Attend engineering clarification meetings as and when required and also assist QA/QC to address engineering issues and establish method statements. Oversee new products' testing, new testing standard & procedure preparation and analyse results.
• Able to attend short overseas assignments when required.

About the Ideal Candidate

• Ideally a bachelor’s degree in Engineering or equivalent; minimum 2 years’ experience in engineering design
• Proven excellent skill in usage of CAD Solidworks and FEA Abaqus
• Have a good understanding of product realization process from development to production
• Strong Project Management skills
• An excellent teammate able to work well with all levels of people across various regions and cultures
• Good problem solving and interpersonal skills
• Good time management, proactive and able to work effectively in a fast-paced environment
• Ideally has knowledge and experience in the maritime, infrastructure, engineering or manufacturing environments but if no formal professional exposure, the candidate must demonstrate a keen interest in learning and acquiring the relevant industry knowledge to build compelling content
• Strong project and vendor leadership skills
• Possesses high level of integrity with good work ethics

Trelleborg is an equal opportunity employer! We celebrate diversity and are committed to creating an inclusive environment for all employees.

Don’t delay, apply today by submitting your CV along with your expected salary and notice period!

At Trelleborg our people are #shapingindustryfromtheinside

Key Responsibilities:

• Develop, manage, and oversee design drawings using advanced design tools such as BIM, Rhino, Grasshopper, and CAD technologies.
• Ensure the compatibility of all models and facilitate seamless access to BIM data for all project stakeholders.
• Collaborate with project teams to ensure design deliverables align with project requirements and standards.
• Provide technical support and guidance on design processes, ensuring accuracy and efficiency in project execution.
• Stay updated with the latest advancements in design tools and methodologies to enhance project outcomes.

Requirements:

• Proficiency in Revit, Navisworks, Rhino, Grasshopper, AutoCAD, and MS Office Suite.
• Familiarity with design file formats and platforms such as DGN, DWF, IFC, and MicroStation is advantageous.
• Strong analytical and problem-solving skills with attention to detail.
• Ability to work effectively in a team-oriented environment and manage multiple projects simultaneously.
• Relevant educational background in architecture, design, or a related field.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

This is What You Will do in This Role:

• Review and understand sales solution requirements
• Co-ordination and preparation of inputs for systems proposals including designs, layouts, costs, schedules and technical documentation to meet submission deadlines.
• Identification and evaluation of controls, safety and IT (WMS and WCS) requirements and considering them in the layout design.
• Understanding the customer’s operation and considering them in the layout design.
• Identification and evaluation of opportunities for alternatives, design innovation and differentiation.
• Calculate machine and conveyor performances by applying application rules.
• Sourcing information and quotations from other departments, internal product centres and external suppliers for equipment & services and to ensure all quotations are technically and commercially sound.
• Liaise closely with Dematic product & knowledge centres and external suppliers for pricing and technical information.
• Ensure designs are properly optimized and all proposal cost estimates and associated inputs are accurate and competitively priced while maintaining technical integrity.
• Ensure solutions are technically sound.
• Identification of any technical project risks.
• Facilitate pre-sales design and costing reviews with key internal stakeholders (Sales, Engineering, Commercial)
• Ensure smooth and complete handover of proposals and tender submissions to engineering following project sale.
• Adoption and/or development & refinement Costing tools to improve the speed and accuracy of the costing process and in to ensure a meaningful format of presentation for other functions who will receive these as inputs.
• Keep abreast of solutions and technologies within the organisation and amongst competitors in the market
• Provide internal updates & presentations related to technical product/solution information
• Support sales with customer visits for technical discussions, clarifications and site surveys.
• Other tasks as assigned by the manager

What We Are Looking For:

• Degree in Engineering related discipline
• At least 3 years of experience in material handling / factory automation industry
• Experience using AutoCAD, knowledge of 3D design is of advantage
• System Design with Industry product and/or application knowledge in Logistics
• Automation controls knowledge is of definite advantage
• Advanced MS Office skills (Excel)
• Time management skills
• Communication skills
• Analytical thinking and strong numerical skills

ONSITE JOB PROFILE

In this onsite role, the engineer is expected to perform the following tasks:

1. Support the customer in design concessions work by following applicable standards and working procedures.

2. Assist in providing design solutions for semiconductor components concessions. Semi conductor fab equipment’s components includes,

a. Power distribution units & Schematics review

b. Cable assembly design & BOM release

c. Support the assembly at manufacturing area.

d. Project schedules & Delivery.

3. Support in study of non conformance of concessions from design point of view.

4. Prepare drawing pack which includes all relevant assembly and components drawings.

5. Prepare design answer which includes solution for clearing the non conformance with appropriate sketches, recommendations and specifications.

6. Delivery of design assessment report for concessions.

7. Support manufacturing & assembly teams

REQUIRMENTS TO PERFORM THE JOB DUTIES

a) Bachelor of Engineering / Technology (B.E. / B. Tech: equivalent to BS) in Electrical Engineering.

b) 6-10 years of experience in Electrical Testing design and ECO coordination.

c) Knowledge of AutoCAD , PLC and cable design

d) Desire for continuous education and training effort.

e) Excellent written and verbal communication skills and ability to interact with all levels within engineering organization.