Electrical and Control Design Engineer

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• Kaki Bukit (East)

Your Responsibilities: -

• Generate mechanical drawings
• Coordinate with customers about requirements and feedbacks
• Ensure drawings are in correct specification and requirements
• Follow-up of assembly and installation work

You will need: -

• No experience required, traning provided

Apply now or email to [email protected]

Good luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 Recruit Lync Pte Ltd 22C1000

The Opportunity

• Exciting opportunity to work in an MNC environment – Beauty Industry (Leader in the industry)
• Monday - Friday/9am to 6pm
• Location: Central
• Salary: Up to $7500
• 6 Months contract - Urgent hire!

The Talent:

• Minimum of 5 years experience in retail with a direct responsibility for visual merchandising & retail concept
• Creates and designs visual concept to animate in a consistent customer path, launches and catalogue
• Ensures technical and legal compliance regarding the production
• Uplifts brand’s visual identity to build customer centric retail concepts

Job Description

• Define and create International Business Division retail design & merchandising strategy in order to elevate the brand image and identity in stores, to reinforce brand visibility, in line with brand equity and brand retailtainment DNA.
• Adapt brand spatial concept to local distribution constraints & business specificities + Implement the merchandising solutions for make-up testers units and POS materials, answering local needs.
• Propose innovative in-store solutions within the frame of distributors partnership
• Coordinate the conception, production, delivery and installation of any kind of local specific materials
• Ensure the respect of brand image in POS
• Support the always on in-store activation of FSS
• Ensure compliance with technical and legal aspects regarding production norms
• Ensure follow-up of the budget
• Monitor the performance of projects taking into account budget and time constraints

Next Step

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.
• Click "apply" or send to the following email: [email protected]
• *Only shortlisted candidates will be contacted*

Amelia Lau An Qi

Direct Line: +65 6697 7987
EA License No: 91C2918
Personnel Registration Number: R1987023

• Well Established Company
• Basic $5000 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer
• To successfully completely New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ)
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes
• To update the status of on-going programs to the management
• To consistently pursue for new customers
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma / Degree in Mechanical Engineering/Precision Engineering or relevant qualification with minimum 2-3 years relevant working experience
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description:

• To engage and establish good business relationships with existing and potential clients
• Respond effectively and promptly to all sales enquiries to ensure conversion into sales
• Coordinate sales effort with team members and other internal departments to ensure that sales orders are fulfilled
• Keep abreast of best practices and promotional trends
• Continuously improve through feedback
• To perform any other duties assigned by superior
• Provide good customer service and assistance to showroom walk-in clients

Requirements:

• Minimum 1 year working experience in the Bathroom, Building Material or Interior Design Industry
• Good communication and interpersonal skills
• Good team player and self-motivated individuals with a positive mindset
• Well groomed, friendly and engaging personality

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

- Permanent

- Up to $6000 + VB

- Mon to Fri: 8.30am – 5.30pm

- Jurong East

Job Responsibilities:

• System Engineering Design
• Generating Test Plan & Procedures
• Sourcing and Procurement of System Hardware
• Planning and Setting up Test Lab
• Conduct Factory Acceptance Test
• Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites
• Perform Troubleshooting and Resolving System Faults
• Perform On-Site Acceptance Test
• Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Period:

• Permanent

Location:

• Jurong East

​Working hours:

• Mon to Fri: 8.30am – 5.30pm

Salary:

• Up to $6,000 + VB

Job Requirements:

• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Minimum 2 to 3 years working experience in industry
• Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred
• Computer literate e.g. MS office, Visio
• Strong Oral and Written Communication Skills
• Excellent Time-management
• Good Learning Capability

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Reg No: R1332758)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: 97C4832)

160 Robinson Road, #13-07/08/09 SBF Center, Singapore 068914
T: 6337 3183 | W: www.successhrc.com.sg

COMPANY DESCRIPTION

Singapore Management University is a place where high-level professionalism blends together with a healthy informality. The 'family-like' atmosphere among the SMU community fosters a culture where employees work, plan, organise and play together building a strong collegiality and morale within the university.

Our commitment to attract and retain talent is ongoing. We offer attractive benefits and welfare, competitive compensation packages, and generous professional development opportunities all to meet the work-life needs of our staff. No wonder, then, that SMU continues to be given numerous awards and recognition for its human resource excellence.

RESPONSIBILITIES

• Team Leadership & Development
  • Recruit, lead, synergise, nurture and motivate a team of software developers/engineers working on different technical platforms to foster a culture of innovation, collaboration, continuous learning and improvement.
  • Set goals/targets for team, drive action plans to closure, and spearhead the on-time and onbudget delivery of high-quality enterprise digital solutions.
  • Provide hands-on technical guidance and mentorship for team members, including career planning and development.
• Technology Planning
  • Assist supervisor in strategic planning and budgeting to support overall business objectives.
  • Develop and implement technical development strategies and roadmaps, including conducting reviews to gather user feedback, to enhance user experience and digital solution performance.
  • Stay abreast of industry trends and emerging technologies across various platforms to recommend, plan and drive technology innovation, adoption and optimisations.
• Development Standards, Practices & Processes
  • Define and enforce application security, integration and usability standards for on-premise and cloud-hosted solutions to ensure secure, seamless integration and compatibility across different technical platforms.
  • Establish and drive continuous improvement in technical design and development standards, practices and processes (including tools and templates) to improve efficiency and quality.
• Stakeholder Collaboration
  • Collaborate with cross-functional teams, including project managers, business analysts, users and other stakeholders, to translate requirements into technical design and implementation, considering implications across various technical platforms.
  • Form good user relations and cultivate trust among users and team members.
  • Ensure prompt and efficient support services for users, including request and issue management.
• Outsourcing & Vendor Management
  • End-to-end management of vendors, including contract management.
  • Monitor and analyse key performance indicators and risks, ensuring that proposed technical solutions are sound, defined service levels and schedules are met with satisfaction.

• Bachelor's Degree in IT, Computer Science / Engineering, or a related field.
• Minimum 10 years of proven experience in leading and managing software development / engineering teams in a fast-paced and dynamic environment.
• Strong technical background with expertise in software development methodologies, cloud technologies, secure and scalable architecture design. Extensive hands-on experience in SAP (e.g. BTP), PeopleSoft, Azure (e.g. .NET), and / or Low/No-Code (e.g. OutSystems) development platforms.
• Excellent leadership, organisational and communication skills to effectively collaborate with internal and external stakeholders.
• Proficiency in project, outsourcing / vendor and contract management.
• Detail and quality oriented with a driven mindset and initiative to make things happen.
• Ability to provide a balanced view of a problem situation, a clear thinker and good problem solver to guide the team to analyse and simplify complex issues and provide effective solutions.

#LI-ST1

Candidates who do not possess the stipulated qualifications but have relevant work experience may still apply. Remuneration and appointment terms shall commensurate with qualifications and experience. SMU reserves the right to modify the appointment terms where necessary.

• Reporting to the General Manager and responsible for technical specification and definition of industrial systems, products and solutions including system and product design, technical sourcing of such systems / products and digitization applications

• To attend technical review with sales team and technical meetings with clients

• To attend coordination meetings with architects, M&E and structural consultants

• To lead a small team of designers; monitor project design submission schedule, check designs and shop drawings, training designers, etc.

• To attend technical meetings with main contractors. Coordinate pipe clashes with M&E and structural services

• Detailed job responsibilities will be provided upon application

Requirements:

• Bachelor Degree in Mechanical Engineering, Automation or relevant fields

• At least 8 years product and application experience in Construction/Engineering industry

• Good business negotiation and presentation skills

• Excellent communication skills with multinational customers and colleagues.

• Ability to lead technical team for business growth. Exhibit flexibility and agility

• Able to work independently with professional judgments, proactivity and team player spirit.

• Revit & AutoCAD proficient

• Candidates available immediately or short notice preferred

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

New Year Get New Job!

Mechanical Design Engineer x 2

Bachelors Degree/Diploma in Mechanical/Mechatronics.
At least 3-4 years experiences in Industrial Automation systems.
Proficient in solidworks 3D software and AutoCAD drafting tools.
Capable to work independently
Ability to design equipment with mechanical, pneumatic and electronic system
Willing to travel in the Asian Regions.
Extensive knowledge and experience in process automation system

☑ Basic $4000 - $6000

☑ Permanent role + High Variable Bonus.

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm )

☑ Tampines

☑ Class 1 MNC Builder

Responsibilities

• Prepare and modify precast concrete drawings (schematic, detailed, and production) to meet local standards.
• Design 2D/3D drawings, perform basic calculations, and resolve technical issues.
• Collaborate with clients, consultants, subcontractors, and participate in design meetings.
• Support junior team members and assist with tasks as needed.

Requirements:

• Diploma or Degree in Civil Engineering
• Min 1 -3 years of related experience with Precast Concrete Shop Drawing

Interested applicants are welcome to apply online with updated Resume/CV via Apply Now button or send your updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

Working days & hours: 5 days, Monday - Friday
Salary: SGD 3,500 - SGD 5,000
Location: Raeburn Park - Nearest MRT: Outram Park / Harbourfront

Responsibilities:

• Lead the print team and oversee development of work for consumer/corporate client campaigns and projects
• Conceptualising and proposing innovative print ideas (ATL/BTL)
• Oversee the day-to-day work of the design team and provide art direction guidance
• Experience work on several projects simultaneously

Requirements:

• Bachelor of Arts in Graphic Design, Fine Arts or equivalent from an accredited art/design school or university
• Min. of 3 years professional experience as an Art Director in print and design creative
• Proficient in all the Graphic Design software – Photoshop, Illustrator, InDesign, Freehand is preferably.
• Sound knowledge in print production process preferred

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Key Responsibilities

Preparation and present DFM (Design for manufacturing)

Construct the Tool design assembly layout

Prepare and issue 2D detail insert & mould base drawing with appropriate tolerance for manufacturing

Tool design must be manufacturability and can estimate cycle time base on as design

Tool design concept able to run production efficiently with lowest cycle time

Tool design capable to run auto cycle

Assist in Customer Engineering Change

Continual improvement on the tool concept

Conduct tool design review to present his / her design concept

Endorse and release tooling drawing to tool room for mould manufacturing

Raise Purchase requisition for the tooling related direct and indirect purchase

Any other duties and responsibilities delegated by superior

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Taking the conceptual design through to implementation and handover;
• Ensure that all design is in compliance with local authorities’ code.
• Ensuring sustainability targets are incorporated into the design;
• Production of tender documentation, including project specifications and contract schedules such as Summary of Tender and Schedule of Rates;
• Progressing the design in accordance with the Design Checklist;
• Chairing sub-contractor progress meetings;
• Chairing Architectural Department Client weekly Meetings;
• Liaising with Quality Assurance / Quality Compliance engineers to ensure alignment of supervision goals with specification requirements;
• In the absence of a Lead Architect, the Senior Architect shall assume the role and responsibilities assigned to the Lead Architect position;
• Mentoring of an Architect with the intent of securing properly trained personnel to ensure the continual expansion of the company;
• Ensuring Architectural System Supervisor is provided with the current approved plans and shop drawings;
• Ensuring Architectural System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation.

Other Duties

• To promote safe working practices and to protect the health and wellbeing of Employees, Sub-contractors and customers;
• To undertake the assigned work scope in a professional and responsible manner;
• To protect the interests of the company;
• The role could vary between pricing, design, construction, commissioning, through to final acceptance;
• Ad hoc duties as determined by management.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

A Design Project Manager in Singapore is responsible for overseeing and coordinating design projects from initiation through to completion, ensuring that design processes meet client requirements, timelines, budgets, and quality standards. This role often involves managing teams of designers, architects, engineers, and other specialists while working closely with clients and stakeholders.

Here are the key duties and responsibilities of a Design Project Manager in Singapore:

1. Project Planning and Strategy:

• Define project scope: Collaborate with clients and stakeholders to understand and define the project’s objectives, deliverables, and key performance indicators (KPIs).
• Create project timelines: Develop detailed project plans with timelines, milestones, and deadlines.
• Set budgets: Establish project budgets, including resource allocation for design teams, equipment, and materials.
• Manage scope changes: Handle any changes to the project scope and update project plans and budgets accordingly.

2. Team Leadership and Coordination:

• Lead design teams: Manage and supervise multidisciplinary design teams, including architects, designers, engineers, and other professionals.
• Delegate tasks: Assign responsibilities to team members and ensure that they have the resources and guidance needed to meet project goals.
• Monitor progress: Track the progress of design deliverables to ensure timelines and quality standards are met.

3. Client and Stakeholder Communication:

• Client liaison: Maintain regular communication with clients to understand their needs, gather feedback, and ensure the design aligns with client expectations.
• Present designs: Present design concepts, updates, and progress to clients and stakeholders through meetings, reports, and presentations.
• Manage expectations: Ensure that clients' expectations are properly managed and met, addressing any concerns or issues promptly.

4. Design Oversight:

• Design coordination: Oversee the design development process, ensuring the quality and consistency of the design work across all stages of the project.
• Ensure design feasibility: Ensure that the proposed designs are feasible within the given budget, timeline, and technical constraints.
• Maintain design standards: Ensure that designs adhere to relevant industry standards, codes, and regulations in Singapore.
• Approve design changes: Evaluate and approve design modifications, ensuring that they align with the overall project objectives.

5. Budget and Resource Management:

• Resource allocation: Allocate resources (design staff, tools, software, etc.) efficiently to meet project needs.
• Budget management: Track and manage the design budget, ensuring that resources are utilized efficiently without exceeding financial limits.
• Cost optimization: Identify opportunities for cost-saving without compromising the design quality and functionality.

6. Risk Management:

• Identify risks: Identify potential risks associated with the design phase, including delays, cost overruns, or technical challenges.
• Mitigation plans: Develop and implement risk mitigation strategies to minimize the impact of identified risks.
• Problem resolution: Resolve issues related to design, scheduling, or budgeting that may arise during the project lifecycle.

7. Quality Assurance and Control:

• Monitor design quality: Ensure that design outputs meet the required quality standards, as defined by the client, regulations, and industry best practices.
• Conduct reviews: Organize regular design reviews to assess progress, identify any quality issues, and make necessary adjustments.
• Implement feedback: Incorporate feedback from clients, stakeholders, and the project team to improve the design process and outcomes.

8. Contract and Vendor Management:

• Manage contractors: Work with contractors, vendors, and third-party service providers to ensure design requirements are met.
• Negotiate contracts: Oversee the negotiation and management of contracts with suppliers and vendors involved in the design process.
• Vendor coordination: Ensure that external partners, such as consultants or material suppliers, meet the design specifications and project schedules.

9. Compliance and Legal Requirements:

• Adhere to regulations: Ensure that all design processes and outputs comply with Singapore’s legal, environmental, and building regulations.
• Obtain necessary approvals: Ensure that all design documents, plans, and approvals are in line with regulatory requirements and are submitted to the appropriate authorities.

10. Project Reporting and Documentation:

• Progress reporting: Provide regular progress reports to senior management and clients, including updates on design, timelines, and budgets.
• Documentation: Ensure all design documentation is accurately maintained and archived for future reference.
• Post-project review: Conduct post-project evaluations to assess the design process and identify areas for improvement for future projects.

Skills and Qualifications:

• Design Expertise: Strong knowledge of design principles, architecture, and industry-specific design software (AutoCAD, SketchUp, Adobe Creative Suite, etc.).
• Project Management Skills: Ability to manage multiple projects simultaneously, with experience using project management tools (e.g., Microsoft Project, Trello, Jira).
• Leadership and Teamwork: Ability to lead and inspire design teams, and work collaboratively with stakeholders, clients, and contractors.
• Communication Skills: Strong verbal and written communication skills to present design concepts and ideas effectively.
• Problem-Solving Abilities: Ability to solve complex design and project-related issues efficiently.
• Budget Management: Experience in managing budgets, cost estimating, and financial reporting.

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Project Coordinator

Salary: $3,200 - $4,000

Working Hours: Monday - Sunday, 6 days shift work 10.30am-7pm; If work night shift next day will come late hours

Working Location: Site (Islandwide)

Office Location: Ang Mo Kio Industrial Park

Job Scope:

• Able to manage projects independently
• Oversee project operations and liaise with clients, subcontractors and suppliers on project matters
• Ensure that project works are completed with respect to the scheduled dates
• Cost and quality control of projects
• Ensure that construction teams and sub-contractors adopt all necessary measures and comply with safety, environmental and other relevant legislation and requirements in the contract

Requirements:

• Minimum 2 year of relevant experience
• Familiar with building plans submission procedures and approvals
• With valid class 3 license will be an advantage

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Senior/Civil & Structural Design Engineer (A1 main contractor)

Our client is a leading reputable A1 main contractor renowned for their impressive portfolio of iconic mixed development, residential and industrial building projects across Singapore. They’re now looking for a Senior/C&S Design Engineer to join them for an iconic institutional building project in the CBD area, supporting their ongoing contributions to the Singapore building landscape.

Job Responsibilities

• Provide technical expertise in the design and coordination of the civil and structural aspects of our construction projects.
• Work closely with project teams to ensure that all structural elements are designed to meet project specifications, regulations, and quality standards.
• Coordinate and liaise with relevant stakeholders to ensure the design complies with all requirement
• Prepare and present technical engineering reports, calculations, drawings, and specifications for project designs.
• Participate in the value engineering process to ensure cost-effective and efficient design solutions.

Requirements

• Degree in Civil/Structural Engineering, Construction Management, or related field
• Minimum 4 years of relevant building project/steel structures experience
• Possess knowledge of preparing construction sequencing drawings
• Experienced in resolving site issues too

Location: Central

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

You can look forward to a conducive learning environment that provides great opportunities for you in an established company with a beautiful work environment.

Earning an income for the lifestyle that you want with the flexibility to manage your own working hours.

Feel the sense of achievement by fulfilling clients expectation of their dream designed homes and seeing things build up from scratch!

Our TOP Sales Designers brings home at least 6-figure income yearly,

with average sales performer’s income at around $6k to $8K monthly.

Responsibilities:

• Meet customers to understand their design and renovation requirements
• Prepare design concept & themes, space planning, quotations and work plans to present to customers
• Prepare project schedule and monitor progress
• Manage and coordinate project works
• Liaise with customers and subcontractors/vendors to carry out renovation works

WE WANT YOU!

If you are:

• Confident and possess Excellent Listening Skills
• Responsible & Sales Driven
• Customer Oriented
• Keen sense in Interior Designing & Project Management
• You believe you are a leader who has the ability to manage people in 12 to 24 months’ time

Why Join Us?

• Up to 60% sales profit pay-out
• Remuneration up to $100,000 or more per annum
• Good genuine customer leads and marketing supports are provided
• No prior experience is required.
• Comprehensive training and mentorship to ensure you succeed
• Guaranteed to secure sales within the first 2 months
• Great career advancement in 2 years & unlimited earning potential
• Training will be provided to all new entry

Café Barista cum Server (Latte Arts)

Working days & hours: 6 days, 10hrs

Location: Clarke quay

Salary: $2800 - $3000

Responsibilities:

• Prepare coffee drinks, teas, and other beverages to customer specifications

• Operate and maintain all coffee-making equipment and tools

• Maintaining cleanliness of work area and equipment

• Interact with customers in a friendly and professional manner

• Follow all safety and sanitation procedures

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Café Barista cum Server (Latte Arts)

Working days & hours: 6 days, 10hrs

Location: Clarke quay

Salary: $2800 - $3000

Responsibilities:

• Prepare coffee drinks, teas, and other beverages to customer specifications
• Operate and maintain all coffee-making equipment and tools
• Maintaining cleanliness of work area and equipment
• Interact with customers in a friendly and professional manner
• Follow all safety and sanitation procedures

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Our client is a well-established construction, property development and specialist engineering solutions provider. Currently, they are currently seeking for Design Manager to be part of the team.

The ideal candidate is a highly experienced and skilled Design Manager with minimum of 15 years of civil engineering or architecture experience post-tertiary education and hold professional status. The candidate should have a proven track record of managing design teams on projects for large scale of Design & Build nature of industrial or treatment process plant. The Design Manager must be well-versed with regulatory agencies’ requirements and standards.

JOB DIMENSION (SCOPE)

• Lead and manage design consultant teams to deliver high-quality design solutions on time and within budget.
• Oversee the entire design process, from concept through to detailed design and construction documentation.
• Ensure designs meet project specifications, regulatory requirements, and client expectations.
• Coordinate with multidisciplinary teams, including architects, engineers, and consultants.
• Foster a collaborative and productive team environment.
• Provide mentorship and guidance to junior designers and engineers.
• Act as the primary point of contact for clients and stakeholders on design-related matters.
• Conduct regular meetings and presentations to update clients on project progress and address any concerns.
• Ensure client requirements are accurately captured and reflected in the design.
• Implement and enforce quality control procedures to ensure the highest standards of design.
• Review and approve design documents, drawings, and specifications.
• Conduct regular design audits and peer reviews to maintain quality and consistency.
• Ensure all designs comply with relevant regulatory requirements and standards.
• Liaise with regulatory agencies to obtain necessary approvals and permits.
• Stay updated on changes in regulations and standards and ensure designs are adapted accordingly.
• Provide technical leadership and expertise in civil engineering or architecture.
• Resolve complex design challenges and technical issues.
• Stay informed about the latest industry trends, technologies, and best practices.

JOB REQUIREMENTS

• Bachelor Degree in Civil Engineering, Architecture, or a related field.
• Master’s degree is preferred.
• Minimum of 15 years of relevant experience in civil engineering or architecture.
• Proven experience in managing design teams on complex projects.
• Experience in the design of multi-storey bus depots or similar structures is preferred.
• Professional Engineer (PE) or Registered Architect (RA) status.
• Strong leadership and team management skills.
• Excellent communication and interpersonal skills.
• Proficiency in design software and tools (e.g., AutoCAD, Revit, BIM).
• In-depth knowledge of regulatory requirements and standards.
• Strong problem-solving and decision-making abilities.

About our client: Our client is in the Waste management industry.

About the role:

• Products / Systems Manage product life cycles including new products and accessory configuration updates.
• Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements.
• Focus on Product and system Application Development for Southeast Asia and China, including technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design (Team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

• To attend technical review with sales team
• To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

• To attend coordination meetings with architects, m&e and structural consultants
• To coordinate and determine the level of pipe sleeve crossing under major roads
• To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc
• To determine the position and depth of launching pits that will aid the installation under major roads
• To study and highlight authority requirements during the meeting.
• To reply to HDB review form
• To reply to NEA BP, DC, WD Advise
• To produce preliminary drawings to aid the tender process for main contractor
• To prepare drawings for PWCS QP endorsement
• To prepare drawings for Acoustic Consultant’s specifications
• To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

• To attend technical meetings with main contractors
• To coordinate pipe clashes with m&e and structural services

Design Support

• To generate fabrication drawings for non-standard equipment
• To monitor project design submission schedule
• To allocate work assignments to other designers
• To check designs, shop drawings done by other designers
• To hold trainings to designers

About you:

• Bachelor’s or master’s degree in automation, mechanical engineering or relevant fields.
• More than 8 years product and application experience in Construction/Engineering industry.
• Good business negotiation and presentation skills.
• Excellent communication skills with local and western customers and colleagues.
• Good leadership to lead technical team to enable faster business growth.
• Proper flexibility and agility.
• Goal and results oriented.
• Able to work independently with professional judgments, proactivity and team player spirit.
• Willing to take up challenging assignments with such track records.
• Revit & AutoCAD

Other information:

• Work location: Central
• Working days: Mon-Fri, 9am to 6pm

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508