Job Description:

• Overseeing projects at one or multiple stipulated sites.
• Assist project manager is the execution of the projects.
• Responsibilites for co-ordination with Consultants, Architects and relevant authorities.
• Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.
• Monitor and ensure progress of works are carried out according to project specification.
• Design schematic drawing, layout drawing, P&ID drawing.
• Review and check drawing before submit to main contractor.
• Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.
• Support project manager in the administration of contract, claim, variation and any dispute arise.
• Raise MR and order material & arrange manpower for necessary works.
• Advise site team for work schedule and technical issues.
• Make sure project is carried out according to schedule.
• Responsible for site supervision and implementation.
• Responsible for ensuring implementing safety measures.

Requirements:
- Minimum diploma
- 3 years or above experiences in ACMV, especially in air-conditioning industry
- Able to use AutoCAD or other related software for ACMV Design
- Able to communicate Fluent in English
- Minimum 3 years in ACMV Sector

As the Marketing & Design Intern, you will be assisting the Communications Director in developing content and doing market research for a new business.

You will be assisting in:

- Social Media management

- Designing and development of content using Canva

- Website editing

- Learning Management System management (on TalentLMS.com)

You must:

- Have an eye for detail

- Have good written and/or spoken English

- Be able to do market research and present findings

- Be able to work independently

- IT-savvy is a plus

If you are trustworthy, efficient, and able to work independently, there are opportunities to work flexibly and on independent projects.

NO experience needed. FRESH GRADS WELCOME :)

Job Responsibilities:

• Advanced low-power physical design/integration flow development.
• Full-chip floor planning and place & route.
• Power network design and analysis.
• Support signoff timing closure, power integrity, and signal integrity.
• Physical Verification using DRC, LVS.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power physical design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Scope:

• Design and develop mechanical systems, products, and components
• Create detailed technical drawings and specifications using CAD software (e.g., AutoCAD, SolidWorks, CATIA)
• Conduct simulations and analysis (e.g., stress, thermal, fluid dynamics) to validate designs
• Collaborate with cross-functional teams to integrate mechanical designs with other systems
• Perform design modifications and improvements based on feedback and testing results
• Develop prototypes and conduct hands-on testing to ensure design feasibility and performance
• Select materials, components, and manufacturing processes for product development
• Ensure designs comply with safety, regulatory, and industry standards
• Prepare and review technical documentation, reports, and presentations for stakeholders
• Support the manufacturing team in product assembly, testing, and troubleshooting
• Manage design projects, ensuring timelines, budgets, and quality standards are met
• Continuously research and apply new design technologies and innovations to improve mechanical systems

Requirements:

• ITE, Diploma, or Degree in Mechanical Engineering
• Minimum two years of experience in customized automation machine design
• Experience in semi-con, connector, or machine design preferred
• Knowledge of SolidWorks, with Pro-E and Inventor as added advantages
• Strong understanding of mechanical movement, function, and performance
• Good perception of 2D & 3D objects and machining processes
• Passion for designing high-performance machines
• Good technical communication skills in English
• Ability to work effectively under pressure

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Minimum 3 years experience in carpentry.

• Calculate fabrication materials
• Able to handle multiple projects and task
• Able to understand and read construction and detail drawings
• Ability to communicate with designers
• Ability to value engineer joinery works
• Calculate fabrication materials
• Experience with different trade material characteristic and usage
• Understand fabrication process and flow
• Able to lead a team of carpenter
• Ability to liaise with sub-contractors and conduct pre-construction discussion
• Ability to train non experience and junior production members
• Able to coach and impart knowledge and skill to new and junior production staffs
• Trouble shooting and propose solutions

About Us:

SOG design is an award-winning, dynamic architecture firm dedicated to crafting innovative and bespoke design solutions. We are seeking a talented Graphic Designer to join our Singapore team and help us visually communicate our vision through compelling designs for both print and digital media.

What Will You Do?

This role entails collaborating with marketing and architectural teams to create striking designs and presentations that effectively communicate project concepts. The designer ensures visual consistency across marketing materials and prepares high-quality presentations for clients.

The ideal candidate is proactive, adaptable, detail-oriented, and possesses strong communication and organisational skills for effective team collaboration.

Key Responsibilities:

Design and Collaboration:

• Collaborate closely with marketing, architectural and interior design teams to create consistent, high-quality visual assets aligned with project and brand objectives.
• Design visually compelling presentation materials to effectively communicate project concepts and firm capabilities to diverse stakeholders, including clients, investors, and internal teams.
• Produce marketing materials, proposals, and reports across digital and print media, ensuring they align with the firm’s visual identity.

Brand Consistency and Global Coordination:

• Ensure consistency in the visual language and branding across all mediums and adapt designs to meet specific needs.

Project Management and Workflow:

• Manage multiple design projects simultaneously in a fast-paced environment, ensuring deadlines and quality standards are met.
• Take initiative in identifying design solutions and opportunities for process improvement while maintaining strong collaboration with team members.

Innovation and Development:

• Stay informed about industry trends, evolving technology standards, and competitor strategies to ensure the firm’s designs remain innovative and impactful.

Qualifications:

• Bachelor’s degree in Graphic Design, Visual Communication, or a related field.
• 2-4 years of professional graphic design experience, ideally in an architectural, design, or creative industry.
• Proficient in Adobe Creative Suite (InDesign, Photoshop, Illustrator).
• A strong portfolio that highlights a variety of graphic design projects, showcasing both print and digital media.
• An eye for aesthetics and attention to detail in design and execution.
• Proven ability to manage multiple projects in fast-paced environments while maintaining quality.
• Experience working with cross-functional teams to ensure brand and visual consistency.
• Demonstrated awareness of industry trends, technologies, and best practices in graphic design.

Why Join Us?

• Opportunity to work in a vibrant, creative environment where design excellence is celebrated.
• Collaborate with a talented team on high-profile projects that make an impact.
• Competitive compensation and professional growth opportunities.

ielo design is a creative agency that provides tailored and fuss-free solutions to retailers and F&B players. As a one-stop agency, we offer a wide range of services that include: market insight, customer analysis, design development and production. We truly believe that each project we design is unique and driven by one objective: creating a stronger and deeper connection with customers that goes beyond aesthetics.

Simply, ielo design boosts its clients’ business results by optimising customer experience through all physical and digital touch-points.

ielo design in Singapore is looking for an account manager to assist the Client Director in managing retail and communication projects, build the prospection plan and tools. The successful candidate must be an approachable team player and be open-minded, interested in the design world

He/she will work along with big retailers/FMCG/Health and F&B brands on creative and innovative solutions in the store environment. Candidates should be able to efficiently and creatively contribute to an ambitious growth agenda.

Managing and delivering day-to-day operational requirements of Clients on all projects

Content creation & copywriting

Proposing analysis of trends, Market research, benchmark on competition reports

Assisting the creative team by synthesizing useful insights from different sources in consolidated presentations

Participating in the design thinking approach and in the creation of inspirational design presentation to translate our work

An ability to speak French would be a plus as a lot of our clients are French, based in France

Owns the briefing process

Managing development, negotiation, evaluation and recommendation of creative proposals

Creating and maintaining project schedules to proactively identify risks and track milestones

Ensure maintenance of agreements and organize documentation at all times

Does regular competitive evaluation

Foster great working relationships internally and externally

Senior/E&M Design Coordinator (A1 main con, MRT projects)

Our client is a leading A1 main contractor with a notable record of mixed development, residential, commercial and MRT projects. They’re now looking for a Senior/E&M Design Coordinator for their Cross Island Line project. This role will be 5.5 days of work per week and performance bonuses to be provided.

Job Responsibilities

• Oversee the planning, design and implementation of M&E systems
• Develop and design mechanical and electrical systems and manage engineering activities
• Collaborate closely with project teams, consultants and architects to ensure smooth execution of the projects
• Prepare technical drawings and design specifications and provide technical support when required
• Ensure that all designs are in compliance with regulatory requirements and industry standards
• Manage and monitor project progress, budget, and quality of deliverables

Requirements

• Degree in mechanical/electrical engineering or equivalent
• Minimum 3 years of relevant experience in E&M design in the construction industry
• Candidates must possess experience with MRT projects
• Proficiency in AutoCAD, Revit and other design software

Location: East (island-wide shuttle bus transportation provided)

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Create comprehensive electrical circuit diagrams for automation and equipment systems.
• Assess, integrate, and validate hardware to ensure compliance with technical specifications.
• Produce CAD drawings depicting electrical circuits.
• Assist in diagnosing and resolving issues with system assembly, operation, and testing.
• Aid in equipment setup, problem-solving, and occasional installation.
• Provide assistance in testing new hardware and applications in-house.

Requirements

• Experience in automation machine design, proficiency in Electrical Design Software, electrical/electronic circuits and test instrumentation

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860

Only Shortlisted candidates will be notified

Quek Jian Wei

Reg No. R22110928

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Position title : Goldsmith

Location: Farrer Park

Working Days: 6 days a week (Must be able to work on weekends)

Working hours : 11am to 9pm

Salary : $3,500

Key Responsibilities:

1. Designing Jewelry and Objects:Create custom designs for jewelry (rings, necklaces, bracelets, etc.) based on customer requests or original ideas.
   Sketch or use computer-aided design (CAD) software to create detailed blueprints of the final product.
   
2. Metalworking:Melt and alloy gold and other metals to achieve the desired color, strength, and consistency for specific pieces.
   Shape and mold the metal using various techniques such as casting, forging, and soldering.
   
3. Casting and Shaping:Pour molten gold into molds to create base shapes for jewelry, and refine or finish pieces through techniques like hammering, rolling, or polishing.
   Use tools such as files, pliers, and hammers to shape metal and add intricate details to the designs.
   
4. Stone Setting:Set precious or semi-precious stones (diamonds, sapphires, etc.) into the metal using various setting techniques such as prong, bezel, or pave settings.
   
5. Finishing and Polishing:Smooth rough edges and surfaces to achieve a high-quality finish.
   Polish pieces using specialized tools to enhance shine and detail.
   
6. Repairing and Restoring Jewelry:Repair damaged jewelry by re-soldering, re-setting stones, or replacing broken parts.
   Restore old or antique pieces to their original form, while maintaining or enhancing their integrity.
   
7. Quality Control:Inspect finished pieces to ensure they meet design specifications, quality standards, and durability.
   Ensure that the weight, size, and quality of metals and gemstones are as required by the customer or company.
   
8. Customer Interaction:Consult with clients to understand their preferences, budget, and desired outcomes.
   Make adjustments to designs based on feedback or specific requests.
   

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Company’s profile
Julian Grey's client specialises in electrical engineering services, offering high-quality installation, design, and supply solutions.


Responsibilities:

• Submit designs, shop drawings, and calculations.
• Lead front-end engineering and feasibility studies.
• Assess design specifications for cost savings and technical improvements.
• Ensure seamless integration of services during project meetings.
• Manage the design approval process with all stakeholders.
• Report on design submissions and handle DAR submissions.
• Oversee testing and commissioning of high voltage systems and ISCS.
• Track design deliverables to ensure timely completion.
• Identify and mitigate design risks affecting project performance.

Requirements:

• Minimum Diploma in Electrical Engineering
• M&E experience in the construction industry

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities -https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Network Engineer

Description:

Responsibilities:

Design and Document Preparation
• Provide networking expertise, revise solution architecture drawings and diagrams
• Prepare the design documents including Low Level Design (LLD) documents for OPS Network and SMRC Network, firewalls configuration, IDS/IPS and hardening states.
• Prepare ITD (Test procedure) document for OPS Network and SMRC Network
• Prepare new or update all the relevant documents (e.g. Maintenance or User Manual, Config/Rollback/Troubleshoot Procedure) required for the OPS Network (FMC, FTD (firewalls)) and SMRC Network (OFL+ONL)
Integration Support:
• The Contractor with support configuration changes to system platforms in factory and customer sites.
• The Contractor will work on the configurations of interfaces, zones, firewall policies, IPS, application filtering for single firewall (Offline)
• The Contractor will support the integration of Offline HSE and Offline Remote Site Switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/NMS/LMS, RADIUS, NTP, SIEM etc (Offline)
• The Contractor will support the integration of Online AMTS New HSE & Remote sites switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/LMS, RADIUS, NTP, SIEM etc. (Offline)
• The Contractor will assist in the SMRC network configuration, Integration, testing, verification and troubleshooting of the following technology used in SMRC Network (Online SMRC)
• The Contractor will work on the configuration, integration, testing, verification and troubleshooting of Online OPS Network selected firewalls / external interfaces (particularly from the Firewall application content inspection (Layer 4 through Layer 7)) (OPS Network)
• The Contractor will configure, optimize and test the transparent firewall failover functionality running in HA and standalone mode with online interfaces for the traffic impact (OPS Network)
• The Contractor will support External Support Platform (ESP) setup, including network platform configuration & Integration (Layer 2 and Layer 3) of switch, configure firewall with S2S VPN, DMZ, NAT and Internet using ACL policies, IPS policies, URL & Content filtering policies, VPN policies, NAT policies, hardening of switch and firewall as per the hardening guideline
• The Contractor to provide troubleshooting support during online deployment & integration (OPS Network)

Hardening Support:
• The Contractor will assist on the hardening of Online / Offline SMRC network equipment and firewalls
• The Contractor will assist on the hardening of Online / offline OPS firewalls (OPS Network).
• The Contractor will troubleshoot / fix if there are any operational / unknown issues occurs in the environment due to the hardening configuration on network devices (Offline, Online SMRC)
• The Contractor will support in case any issue with hardening of online firewalls / any operational issue occurs due to the hardening of online network devices (OPS Network).

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the Tech Aalto Privacy Policy, a copy of which is published at Tech Aalto’s website (https://www.techaalto.com/privacy/)

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

• Handle the design team to achieve targets for the Civil engineering, Geotechnical engineering, Infrastructural design works.
• Lead consultant and review their design to ensure to meet the relevant requirements and the project’s preference.
• Discuss the design results to the client and other stakeholders and obtain their agreement.
• Enhance the design to reduce cost and construction schedule effectively.
• Finish all design works including necessary approvals without adversary affecting the tender/construction schedule.

Requirements:

• Degree in Civil Engineering recognized by the PE Board
• At least 7 years of marine civil design experience in a large-scale project.
• Good knowledge in international and domestic standards for design work.
• Experience in marine structure D&B plant project and overseas ODA project is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Create comprehensive electrical circuit diagrams for automation and equipment systems.
• Assess, integrate, and validate hardware to ensure compliance with technical specifications.
• Produce CAD drawings depicting electrical circuits.
• Assist in diagnosing and resolving issues with system assembly, operation, and testing.
• Aid in equipment setup, problem-solving, and occasional installation.
• Provide assistance in testing new hardware and applications in-house.

Requirements

• Experience in automation machine design, proficiency in Electrical Design Software, electrical/electronic circuits and test instrumentation

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860

Only Shortlisted candidates will be notified

Quek Jian Wei

Reg No. R22110928

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.


Responsibilities

• Specify requirements and features for semiconductor equipment.
• Conceptualize and establish the architecture of innovative equipment.
• Engineer mechanical systems, incorporating the selection and utilization of motors, actuators, gear drives, pumps, and valves.
• Generate intricate engineering drawings.
• Conduct design verification and validation testing to guarantee adherence to specifications, safety regulations, and product requisites.
• Enhance the design of existing machines.
• Utilize analysis tools such as Fish Bone Diagram, FMEA, etc. to optimize processes.

Requirements

• 5 years of experience in semiconductor equipment design
• Expertise in designing automation and high precision machinery, including High-Speed Pick and Place mechanisms
• Proficient in 3D CAD software and equipment troubleshooting
• Capable of producing detailed mechanical drawings and applying knowledge of Geometric Dimensioning & Tolerancing

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

A global energy-efficiency and infrastructure firm is looking for an experienced Senior HVAC Design Engineer to oversee the design, development, and implementation of cooling systems and industrial utilities projects (HVAC/District Cooling Systems). The ideal candidate will have a strong background in mechanical engineering, with a focus on cooling technologies such as HVAC, refrigeration, and industrial water systems.

Responsibilities:

• Lead the design and development of cooling systems and industrial utilities projects (including large scale HVAC, chilled water, district cooling system, airside systems etc.)
• Manage the full project lifecycle from concept to delivery, ensuring adherence to timelines, budgets, and quality standards.
• Conduct feasibility studies, risk assessments, and cost-benefit analyses for proposed projects.
• Provide technical inputs for CAPEX and OPEX assessments
• Review equipment specification and ensure technical compliance

Qualifications:

• Bachelor's degree in Mechanical Engineering or any relevant disciplines
• Min. 5+ years of design expertise for cooling systems, industrial utilities, or large scale HVAC projects
• Strong technical knowledge of HVAC systems, refrigeration, industrial water systems, and related technologies.
• Proficiency in CAD/BIM software such as AutoCAD/Revit

If you are interested, kindly apply with your latest CV detailing your design expertise on HVAC/cooling systems. Only shortlisted candidates will be contacted.

HEAD OF DESIGN (EVENT)

Company background: One of Singapore's established event management company specializing in conceptualisation, production and management of small to large-scale events, conferences and exhibitions.

Location: Central (Bukit Merah)

Working Hours: 5 Days Work Week, Mon to Fri (10am to 6.30pm)

Remuneration Package:

• Basic up to S$ 8000
• AWS
• Project Incentive
• Profit Sharing

Job Responsibilities:

• Drive innovative design concepts and themes for luxury and lifestyle events and exhibitions
• Design and produce creative 3D renderings, highly detailed layout plans, elevation drawings and technical drawings
• Lead and inspire a team of designers and oversee the design workflow for events and branded exhibitions (3D renderings, layouts, technical drawings and shop drawings)
• Projects allocation for the design team to ensure efficient turnaround
• Work closely with account servicing team and production team in ensuring design aligns with client’s requirements, and ensuring budget alignment for designs
• Communicate closely with vendors and contractors
• Attend site visits and inspections to assess venue requirements and develop spatial layouts and designs that optimize the attendee experience
• Able to manage personal workload, delegate tasks to design team effectively, prioritize team workloads, and oversee project timeline to ensure timely delivery of design deliverables
• Managing workflow with external freelancers when specialized skills or additional resources are needed

Requirements:

• Bachelor’s or Master’s Degree in Interior Design, Exhibition Design, or a related field
• Minimum 7 years of experience in lifestyle, luxury, fashion, or experiential event design
• Advanced skills in spatial planning, 3D modelling, and visualization, with expertise in photorealistic rendering techniques
• Proven track record in leading and managing creative teams; strong leadership and mentorship abilities
• Good understanding of clients’ brand strategy and design alignment for luxury and lifestyle brands
• Excellent communication and presentation skills
• Proficiency in 3ds Max, Adobe Creative Cloud software, SketchUp, and AutoCAD

Please be notified that only shortlisted candidates will be notified.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Responsibilities:

• Assist to develop new and/or refresh Design Guidelines.
• Review design, explore opportunities for improvement with innovative ideas and practical solutions throughout the engagement with tenant on design and fit out matters for timely store opening.
• Effective communication and collaboration with Centre Management team and leasing colleagues in concluding requirements for mutual agreement and tenant engagement.
• Support property feasibility studies and involve actively in the upkeep of property design enhancement works.
• Keeping current of market and consumer behaviour, trends and design to share with teammates and tenants to keep designs updated.
• Involve in the data management of properties architectural drawings.
• Represent Tenancy Design Management in property New or AEI projects:
• Support CMO team in design briefs and reviews, coordination with cross-departments for environment design and site progress.
• Constant communication with external stakeholders such as consultants and main contractor on authority submission matter and up-to-date drawings and project provisions.
• Maintain strong relationship with tenants and their designer/ contractor to ensure good communication and updates on design progress and fit out matters.
• Regular updates to team on the progress of tenant’s timeliness for design submission and scheduled opening.
• Be an excellent team-player to successfully open the mall with high numbers of store opening.

Requirement:

• Degree or Diploma in architectural, interior design or equivalent
• Minimum 5 years of experience in retail interior design and fitout

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

As part of a high-performing Implementation and Solutions team, you will take a lead role in driving forward new Enterprise RPO & Project Solutions globally.

Working closely with cross-functional teams, you will design and implement bespoke outsourced recruitment solutions aligned to the client’s requirements, whilst supporting with the client onboarding process and transition to our award-winning operations team. You will be responsible for establishing and evolving exceptional relationships with existing and prospective clients, through the provision of a highly consultative and client centric approach throughout the design and implementation process.

What you will be doing:

• Designing tailored solutions for new deals and renewals based on client needs
• Manage pricing for new opportunities and work closely with Business Development leaders to create compelling commercial offerings
• Manage and coordinate the end to end delivery of implementation RPO and Recruitment projects, including scoping, planning, executing and closure
• Lead cross functional teams and collaborate with stakeholders ensuring successful project delivery
• Identify and implement process improvements to drive efficiency and success
• Attend and actively participate in client briefings pitches, locally, regionally and globally
• Utilise project management tools and techniques and drive innovation through technology enabled solutions
• Enable continuous improvement for existing clients and projects

Who you are:

• With a track record of delivery within the RPO/ recruitment space, you will be adept at engaging with business leaders and developing strong partnerships with clients and stakeholders.
• An experienced RPO leader with exceptional communication and outstanding problem solving skills and a demonstrated ability to come up with creative solutions to new problems
• Highly commercial with proven project management expertise, stakeholder management and operational management success across a portfolio of clients and industry sectors
• You are energetic, committed and results oriented
• You can think on your feet with an attitude and approach to thinking about things differently, seeking out better ways, embracing critical questioning, innovation and continuous improvement.

Why you’ll love working for Hudson RPO:

• Work with some of the world’s leading and most recognised brands
• Receive four ‘Thrive’ days of leave per year to support your health and wellbeing (on top of your annual leave!)
• Flexibility is at the core of who we are, and flexible work arrangements are encouraged
• Quarterly and annual recognition programs to celebrate our employee’s success
• We’re a passionate team of people who are shaping the future of talent!

A little bit about us

At Hudson RPO, we’re shaping the future of talent.

From recruitment process outsourcing (RPO) to employer branding and across the complete talent life-cycle, we thrive in delivering world-class customer and candidate experiences. People are at the centre of everything we do.

We deliver innovative, customised recruitment services and talent solutions to organisations worldwide. We’re an innovative and diverse team who work hard and think smart. Led by accomplished and inclusive leaders, our people are always open to trying new things to continuously bring excellence into our client solutions.

At Hudson RPO we don’t just accept difference – we celebrate it, support it, and thrive on it for the benefit of our employees, our clients, and our community. We are proud to be an equal opportunity.

Job Summary:

The Content Creator & Social Media Marketing Specialist is based in Singapore, will play a crucial role in developing engaging content that represents our brand and resonates with our audience. This position will focus on creating visual and written content for our social media platforms, website, and other digital channels. You will manage our social media presence, engage with our community, and contribute to increasing our visibility and enrolment.

Responsibilities:

• Develop and execute a content calendar aligned with the school’s goals and marketing strategies.
• Create compelling visual and written content for social media platforms (Instagram, Facebook, YouTube, etc.), website, newsletters, and other digital channels.
• Plan and manage social media campaigns that promote upcoming classes, events, and special programs.
• Capture photos and videos during classes, events, and workshops to showcase student work, faculty, and the school environment.
• Engage with followers, respond to comments, and build an online community.
• Track and analyze social media metrics to optimize content and improve engagement.
• Collaborate with instructors and the management team to ensure content reflects our school’s artistic vision and brand voice.
• Stay up-to-date with digital marketing trends, social media algorithms, and best practices in content creation.

Requirements:

• Proven experience in content creation and social media management, preferably in an arts, education, or creative field.
• Strong visual storytelling abilities and proficiency in Adobe Creative Suite (Photoshop, Illustrator, Premiere Pro, etc.) or equivalent design/video editing software.
• Excellent communication skills and the ability to write engaging, on-brand content.
• Familiarity with social media platforms (Instagram, Facebook, TikTok, YouTube) and content scheduling tools.
• Strong photography and videography skills.
• Strong attention to detail, creativity, and a passion for the arts.
• Ability to work both independently and collaboratively in a team setting.
• Bachelor’s degree in Marketing, Communications, Digital Media, or a related field is a plus.

Benefits:

• Competitive salary and performance-based incentives
• Opportunities for professional development and training
• A creative, inspiring work environment with access to art classes and workshops

About Us:

Little Artists Art Studio has been a premier art studio established since 1997 and currently runs its programs at two branches with off shore operations of art camps and many more with the reason of spreading its wings globally. The studio is known for providing high quality art education to children and inspiring creativity in them. Our major demographic consists of students starting from 2.5 years to 17 years.

Our students are regularly selected for good art / design / architecture colleges globally and for SOTA (Singapore Art School). Our studio consists of a cosmopolitan student and teaching body from all around the world. We believe in a long-term relationship and providing growth to our professionals with the growth of the studio. People who have passion for children and art with a sincere and positive attitude are bound to be successful at Little Artist.