Job Description:

1. Lead the team in designing, simulating, and documenting analog circuits and chip designs.

2. Oversee and optimize layout design and routing to enhance efficiency and quality.

3. Support product testing, debugging, and application development.

4. Mentor junior analog designers and prepare comprehensive design documentation.

Job Requirements:

1. Master’s degree or higher in Microelectronics or Electronic Engineering with over 10 years of relevant experience.

2. Expertise in designing analog mixed-signal circuit blocks, including bandgap references, bias circuits, LDO regulators, amplifiers, comparators, switched capacitor circuits, ADCs, DACs, oscillators, filters, Tx/Rx equalizers, and circuits like de-emphasis, CTLE, DFE, and CDR architecture, as well as high-speed digital components (serializers, deserializers, counters, dividers, etc.).

3. Proficiency in high-speed interface protocols such as PCIe, USB, SATA, DDR, and LPDDR.

4. Advanced knowledge of analog mixed-signal design, with experience in high-speed serial and parallel circuits using cutting-edge processes (e.g., 3nm, FinFET, SOI, bulk CMOS).

5. Extensive hands-on experience with design tools and static timing analysis tools (e.g., Nanotime).

6. Strong problem-solving skills and a proven ability to deliver results within tight timelines.

Interested candidate may send your resume to [email protected]

Piping Design Engineer

• Working Days: 5 days’ work week
• Working Hours: 8:15 am–6 pm (Mon-Fri)
• Office Location: Joo Koon
• Salary Range: S$ 2,500 - 3,500

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Project Executive

Working Hours: Monday-Friday (9.00 am - 6.00 pm)

Working Location: Bartley

Salary: $2500-$3000 + Commission

Requirements

• Professional Certificate/Diploma/BS/BA or a related field of study
• 3-4 years of experience in account management, preferably in interior design / creative-led industry
• Must be able to read and edit autoCAD, SketchUp and other design softwares and site work is required.

Responsibilities

• Assist Project Director to manage the accounts of creative-led projects.
• Acting as the primary point of contact for clients, ensuring that their needs are met and their questions are answered in a timely manner
• Developing project plans and timelines, and ensuring that all project milestones are met on time and on budget
• Coordinating with other departments, such as design and production, to ensure that all project elements are delivered on time and to the client's satisfaction
• Preparing and presenting project status reports to the client and internal stakeholders
• Identifying opportunities for upselling and cross-selling to existing clients
• Ensuring that all project documentation is accurate and up-to-date
• Conducting research on the latest industry trends and best practices to ensure that our company remains competitive and innovative

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

• Prepare and modify precast schematic, detailed, and production drawings for precast concrete components, steel molds, and reinforced concrete structures.
• Develop solutions for technical and design challenges in accordance with Singapore’s established standards.
• Create 2D and 3D presentations and design drawings.
• Compile data and conduct basic design computations.
• Engage in client communication, consult with authorities, coordinate with consultants and subcontractors, and attend design and construction meetings.
• May mentor and oversee the work of less experienced colleagues.
• Perform any additional tasks and duties as assigned by management or the direct supervisor.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

EA License No: 20C0270

EA Personnel No: R22110981

EA Personnel Name: Law Mei Fong

Responsibilities:

• Carrying out civil & structural design and drafting works within stipulated timeline
• Carrying out authority submissions
• Coordinating with various parties related to the project including liaising with drafters on the deliverables

Requirements:

• Engineers with integrity and positive working attitude
• Min. 5 years experience in consultancy firm
• Being proficient in design and drafting software and able to produce submission drawings.

Working Options:

• Base in Singapore (Work from office/home)

Responsibilities:

• Manage projects and supervise site coordination
• Support Sales Designers on interior design scope of work
• Support Design team with space planning and concept development
• Provide macro strategic overview on managing projects

Requirements:

• Min 2-3 years of interior design experience, inclusive of site management experience in residential projects
• Engineering education
• Possess own vehicle/transport is an added advantage

Job Scope

• Lead the design, development and testing of new mechanical engineering solutions to support the company's product roadmap
• Collaborate with cross-functional teams to transform design concepts into high-quality, manufacturable products
• Conduct root cause analyses, troubleshoot and resolve technical issues to ensure product quality and reliability
• Stay up-to-date with the latest industry trends, technologies and best practices to continuously improve engineering processes
• Mentor and guide junior engineers to enhance their technical skills and foster a culture of continuous learning
• Contribute to the development of engineering standards, policies and procedures to drive operational excellence

Requirements:

• 3+ years of experience as a Design & Development Engineer or in a similar role within the Mechanical Engineering and Semicon industry
• Proficient in mechanical design, CAD software (e.g. SolidWorks, AutoCAD) and prototyping techniques
• Strong understanding of manufacturing processes, materials, and testing methodologies
• Excellent problem-solving, analytical and critical thinking skills
• Effective communication and collaboration abilities to work with cross-functional teams
• Proven track record of leading and mentoring junior engineers
• Bachelor's degree in Mechanical Engineering or a related field

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Description:

• Lead the design of both temporary and permanent standalone structures, ensuring all project requirements are met with precision.
• Provide assistance in the design of building structures, including the development of detailed structural framing plans.
• Undertake geotechnical design responsibilities, leveraging existing experience or demonstrating a commitment to acquiring new skills in this area.
• Supervise and mentor supporting design engineers in the execution of detailed civil, structural, or geotechnical designs.
• Oversee drafting engineers to ensure the production of high-quality drawings that align with project specifications.
• Strategically plan and schedule various scopes of work, including design, drawing production, authority submissions, and construction support to facilitate project success.
• Collaborate effectively as a dedicated team member, engaging with clients and coordinating with consultants from other disciplines and contractors to achieve project objectives.

Job Requirement:

• Bachelor’s or Master’s degree in Civil and Structural Engineering or its equivalent.
• Experience in concrete and steel structures design, and temporary works design.
• Demonstrate thorough knowledge of local codes of practice and regulations required for submissions to authorities.
• Exhibit strong proficiency in essential structural design software, including ETABS, STAAD Pro, SAFE, SAP 2000, and MIDAS.

Senior Radio Frequency Design Engineer

About Doodle Labs

Doodle Labs is the global leader in high-performance private wireless systems. We build cutting-edge mesh networks for robotics, drones, and the Industrial Internet of Things. Doodle Labs has experienced rapid growth over the past five years as our radio systems have been adopted by Fortune 500 companies (e.g. Airbus, General Electric) and industry-leading innovators (e.g. Boston Dynamics, FLIR).

Your Opportunity

Doodle Labs develops market-leading broadband mesh radios. Products include handheld mesh hotspots (Wearable Smart Radio) and tiny embedded multi-band radios for robots (Helix). Your opportunity is to build novel RF products while implementing Doodle Labs’ patented RF techniques. You will design and develop next generation wireless communication systems utilizing Wi-Fi 4/5/6/6E chipsets and protocols. As a senior member of the engineering team, you’ll have the opportunity to lead projects with the support of a cross-functional team of RF engineers, technicians, software engineers, etc.

Job Description

· Perform detailed radio frequency translation plans and architectures

· Evaluate gain, noise parameters (NF, SNR), dynamic range, linearity, and power consumption analyses to execute a predictable, robust design

· Collaborate with CAD engineers and drive PCB implementation of the design with emphasis on clean power supply design, interconnect design for required EMI and RF transmission performance

· Participate in design reviews and prepare design documentations at every stage of development until the final prototype test and characterization

· Perform parametric evaluation of transceivers, like Pout, IMD/IP3, EVM, noise parameters with spectrum analyser, modulation analyser and perform wireless link level functional evaluation to complete the product characterization

· Collaborate with product engineers for various certification procedures and NPI, followed by the Transfer of Technology (ToT) for large quantity production

Job Requirements

· Bachelor’s, Master’s, or PhD in Electronics Communication Engineering or Digital Communication Engineering

· Minimum 8 year of experience as a RF system hardware with proven track record of meeting industry delivery standards in the relevant areas

· Good interpersonal and creative skills with the ability to multitask in a demanding and fast paced environment

Benefits Summary:

• Up $5000 + Variable Bonus + Benefits
• 5 Days work week
• Working Location: North
• MNC with good working environment

Responsibilities:

• Responsible for engineering and documentation
• Responsible for projects schedules, budgets and dateline in our pipeline
• Provide assistance to the site and commissioning activities when required
• Work together with the team to ensure for the proposal and costing budgets are in line
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:

https://www.facebook/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on for more details:

https://wa.me/6593839640

Follow us on Telegram for more job opportunities:

https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

Edward TOH

Registration No: R1658602

EA License No: 20C0278

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

Requires a BS in Electrical or Computer Engineering and > 5 years of related experience

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

THE ROLE:

To validate and characterize the most cut edge SerDes design including PAM4 224G transceiver on the most advance technology node. Using the latest measuring equipment the semiconductor industry has to offer to benchmark AMD’s SerDes against the challenging industry standard.

THE PERSON:

We are looking for a meticulous and motivated engineer to join the validation teams.

KEY RESPONSIBILITIES:

• Post Silicon Validation of high speed SerDes
• Understand the industry requirements and specification for high speed IO
• Develop validation methodology to validate new industry standard and requirements.
• Characterize the latest SerDes design
• SerDes debug with designers on Silicon
• Tuned the latest design to performance at the most optimum setting
• Generate specification base on measured results
• Work with remote teams to co-ordinate distributed task.
• Support FAE on customer’s issues relating to high Speed Ios

PREFERRED EXPERIENCE:

• Experience in high speed IO SerDes post-silicon validation.
• In-depth knowledge of the latest industry standards such as PCIe, Display Port, JESD, SDI, OIF-CEI-11G/25G/56G/112G-VSR/SR/MR/LR, IEEE 802.3 KR/CR/CAUI/GAUI etc.
• Strong programming/scripting skills coding languages such as Python, C/C++, TCL for firmware development, test methodology development and test automation
• Extensive experience with common lab equipment, including BERT, analyzers, oscilloscopes, PNA/VNA etc
• Knowledge of SerDes general architectures and link level system analysis
• Good understanding in transmission line theory and electromagnetic theory
• Experience in system level serial link analysis and simulation, system performance optimization and standard/architecture level study using tools such as Matlab, ADS etc.

ACADEMIC CREDENTIALS:

• Bachelors/Masters degree in Electrical/Electronics Engineering

LOCATION:

Singapore

#LI-MM1

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Hi our Client is looking for a dynamic Chip Design Engineer to be part of their team.

Job Description

1. Design and implement high-speed memory interfaces and circuits.

2. Deliver AMS circuits in SerDes and evaluate circuit topologies.

3. Develop and optimize high-speed interface modules (e.g., bandgap, bias circuits,LDOs, ADCs, DACs, oscillators, filters, Tx/Rx equalizers, and serializers/deserializers).

4. Collaborate with the verification team to debug in the lab.

5. Work with software teams and customers to troubleshoot and enhance system performance.

Job Requirements:

1. Bachelor's in Communications, Electronic, or Computer Engineering;

2. Min 4 yrs working experience in ASIC design, with knowledge of the ASIC development process.

3. Proficiency in AMS circuit design and Electronis Design Automation tools.

4. Experience with high-speed interfaces (e.g., DDR, SerDes, PCIe) is a plus.

Interested candidate please email your resume to [email protected]

At Aleph, we design human experiences by asking the right questions. Here, you’d find a curious breed of creative engineers spread across the globe, specializing in craft, strategy, and technology. With a keen ear to the ground, we turn big dreams into user-first digital solutions by design. Through rigorous prototyping, close collaboration, and responsive engineering, we commit to creating a future that leaves our craft, community, and clients better than before we began.

At Aleph, we design total experiences by asking the right questions. Here, you’d find a curious breed of Creative Engineers spread across the globe, specialising in craft, strategy, and technology. With a keen ear to the ground, we turn big dreams into user-first digital solutions by design. Through rigorous prototyping, close collaboration, and responsive engineering, we commit to creating a future that leaves our craft, community, and clients better than before we began.

Key Responsibilities

Research and Strategy

• Utilize frameworks and tools to discover and ideate strategic models to address complex challenges.
• Demonstrate expertise in UX tools such as customer journeys, persona archetypes, service blueprints, and testing methodologies.

Design Fundamentals and Tools

• Apply design functions to produce unique design elements (e.g. Typography, Colours, Iconography, Retouching).
• Incorporate innovative technologies in strategy development, while demonstrating familiarity with industry tools such as Figma, Adobe Suite, and Midjourney.

Presentation and Storytelling

• Present and communicate complex strategic concepts to varied audiences, facilitating stakeholder alignment and buy-in.
• Inspire, present, and communicate ideas through compelling storytelling and writing to underscore design decisions.

Task Prioritisation and Planning

• Lead and manage intricate strategic projects, driving them from inception to successful conclusion.
• Use advanced project planning and management tools to ensure efficient execution and delivery of strategic initiatives.

Creative Direction and Execution

• Apply design functions to produce unique design elements (e.g., Typography, Colours, Iconography, Retouching).
• Collaborate with project managers/scrum coaches to devise a design plan and deliverables, demonstrating understanding of SCRUM.

Resilience and Growth

• Understand the influence of solid strategy on user experience, particularly in tech and AI contexts.
• Embrace constructive feedback, exhibiting resilience and a consistent desire to evolve your strategic acumen.

Prerequisites

Learning and Development

• Collaborate with both management and working teams to enhance our reputation, business, and people through Project Leadership, Design Leadership, and Business Growth.
• Work with the Growth Team and fellow leads on business development efforts, crafting approaches, writing proposals, and presenting to prospective clients.

Passion and Interest

• Work closely with business teams to identify opportunities in the market and ongoing projects.
• Reframe insights and briefs into actionable outcomes to create unique propositions, solutions, and strategy.

Communication and Time Management

• Drive the Creative Engineering culture, safeguarding quality of projects and deliveries from a creative standpoint.
• Mentor and ensure the welfare of the team, continuously evaluating productivity and identifying initiatives within the company.

Benefits

• Competitive salary (compensation will be based on experience)
• Medical insurance
• Yearly reward based on performance
• Casual work environment and attire
• A solid team behind you: great people who love what they do
• A fun culture which promotes learning and knowledge sharing
• Opportunities for personal and professional growth offerings from our in-house Learning @ Aleph Academy, Flocket meetups, timely training for skills upgrade, workshops and conferences.

Responsibilities:

• Work directly with the customer to understand application constraints and performance criteria to translate their needs into design requirements optimized for 3D Printing
• Implement generative design and topology optimization techniques to enhance efficiency and material utilization and ensure that parts designed consider factors such as build orientation, support structures, and material characteristics
• Generate and finalize part design and assist process engineers to develop proper manufacturing processes
• Stay abreast of advancements in metal 3D printing technologies, materials, and design methodologies and continuously evaluate and integrate new tools and techniques to improve design processes and outcomes

Qualifications：

• Master in mechanical engineering or similar technical discipline
• 3+ years in metal 3D printing
• Experience using Additive Manufacturing Software such as Materialise Magics
• Familiarity with a range of additive manufacturing materials and their properties
• Strong problem-solving skills and the ability to think innovatively in the context of additive manufacturing
• Excellent communication skills for effectively conveying design concepts and collaborating with team members
• Willing to travel (25% of time)

Job Summary:

We are seeking a skilled Senior UI Designer and Web Developer to lead the design and development of visually stunning and highly functional web applications. You will work closely with cross-functional teams to deliver seamless user interfaces, enhance user experience, and ensure responsive, high-performance websites.

Responsibilities:

• Lead the design and development of web interfaces, ensuring user-friendly, visually appealing, and functional layouts.
• Collaborate with product managers, UX designers, and developers to define project goals and requirements.
• Create wireframes, prototypes, and high-fidelity mockups to communicate design concepts.
• Implement designs using HTML, CSS, JavaScript, and front-end frameworks (e.g., React, Vue).
• Ensure cross-browser compatibility, responsiveness, and accessibility of web applications.
• Optimize websites for maximum speed and scalability.
• Maintain consistent visual design patterns across projects and ensure brand standards are met.
• Troubleshoot and resolve UI-related issues during development and post-launch.
• Stay current with design trends, emerging technologies, and industry best practices.
• Mentor junior designers and developers, providing guidance on design and development techniques.

Requirements:

• A graduate in Web Design, Computer Science, or a related field (or equivalent experience).
• 5+ years of experience in UI design and front-end development.
• Proficient in HTML5, CSS3, JavaScript, and front-end frameworks like React, Vue, or Angular.
• Strong experience with design tools like Figma, Adobe XD, Sketch, or similar.
• Solid understanding of UI/UX principles, responsive design, and web accessibility standards.
• Ability to translate complex ideas into clear, user-friendly designs.
• Experience with version control (Git) and modern web development practices.
• Strong attention to detail, creativity, and problem-solving skills.
• Excellent communication and collaboration skills.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

• Build blazing fast page speeds
• Build reusable components/primitives
• Delightful user interactions and affordances
• Work with the team to review PR, and make the codebase robust.

Job Requirements

• 5 years experience at tech startups with millions of DAUs
• Solid knowledge of TypeScript, and experience with Next.js, etc.
• Basic backend skills with Node.js, building REST APIs, working with databases
• Knowledge in Bitcoin and mining concepts
• Strong written and verbal communication skills

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Job Scope:

• Carry out structural design and produce professional engineering calculation complying to Eurocodes and prevailing building control regulations
• Attending technical meetings with authorities, developer, and contractors
• Prepare technical engineering reports as and when required by authorities or client

Requirements:

• Minimum 2 years of experience as Design Engineer in building construction
• Willing to and with enthusiasm to learn in the eld of civil & structural engineering design
• Knowledge with Revit Structure is an added advantage

Senior Mechanical Design Engineer

• Company: SemiCon
• Salary: $ 4,200 - $ 5,800 (Dep on experiences)
• AWS + VB + PB
• Benefits: Dental and Medical claim
• Monday - Friday, 8.30am - 5.30pm
• Location: Ang Mo Kio

Job Responsibilities:

• Design and develop series of marking/inspection/ sorting/customised semiconductor equipment to meet the processing and automation needs of customers
• Design standardization
• Costing and project management
• Machine and module conceptualization design
• Design for manufacturing (DFM), design for assembly (DFA) and Concurrent engineering
• Pneumatic/ hydraulic circuit design
• Detail fabrication drawings, assembly drawings and layout drawings
• Selection and sizing of standard components available off the shelf
• Undertake new product development or be involved in sustaining engineering/CIPs

Job Requirements:-

• Bachelor/ Master of Engineering with min 3-5 years relevant experience
• 3D solid Modeling, preferably Pro-E/ Creo (others like Solid Edge, Auto Inventor, Mechanical Desktop, Solid Designer are also acceptable)
• Electro-mechanical module conceptualization and design
• Pneumatic/fluid circuit design
• Detail fabrication drawings, assembly drawings and layout drawings
• Selection and sizing of standard components available off the shelf
• Strong project management skills
• Good track record in: Ultra High Precision machine design, High Speed Pick and Place mechanism design, Structural, kinematics and dynamic analysis and FEA simulation, Geometrical tolerance and dimensional analysis (e.g. stack up error), Engineering material selection, Design troubleshooting & Application of analysis tools like FMEA, DOE

How to apply:

By submitting any application or resume to us, you will be deemed to

have agreed and consented to us disclosing your personal information to prospective employers for their consideration.We regret only shortlisted candidates will be notified.

Kok Jean Ray

Registration Number: R22110935

EA Licence No: 16C8004 (Elitez Pte Ltd)

Description:

• Plan, design, and coordinate for civil & structural engineering, Geotechnical engineering, infrastructural design works for local projects internally and with contractors/project team.
• Ensure all engineering works comply with all relevant Statutory standards, Regulations and Codes of Practices.
• Review design prepared by engineers and maintaining high-quality standards of design consultancy service.

Job Requirements:

• Bachelor’s or Master’s degree in Civil and Structural Engineering/Geotechnical Engineering or its equivalent.
• Post graduate degree in geotechnical is preferred for the geotechnical role.
• Minimum 10 years of relevant building structure and infrastructure design experience.
• Familiar with Eurocodes, local standards and regulations.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541