Summary:

• Location : North
• 5 day, office hours
• MNC with good career progressions
• AWS + VB

Responsibilities:

• Support the design, development, configuration, and implementation of mechanical and electronic systems to enhance efficiency, improve yield, and strengthen EO capabilities, from concept to pilot stage.
• Recommend, procure, implement, and optimize mechanical and electronic components as needed.
• Provide timely assistance to OPs teams during process runs, transitioning from the pilot phase to production, and ensure solution documentation is created and maintained accurately.
• Involve in meetings with customers to understand their requirements for new projects.
• Research and develop innovative ideas and concepts to improve the company’s performance and competitiveness in industrial automation.
• Procure or assist in procuring necessary items to facilitate the execution of these duties.

Requirements:

• Diploma or Bachelor Degree in Mechanical Engineering
• Experience in setting up PLCs, single-board computers, or robotic/automated systems, especially in an industrial setting, is an advantage.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

Job Description:

• Design and develop electrical systems, components, and wiring diagrams.
• Design and oversee the electronics hardware design activities of the whole product.
• Select electrical/electronics components for new product development, and replacement for existing products as well.
• Conduct electrical testing and troubleshoot systems to ensure functionality.
• Collaborate with cross-functional teams (e.g., mechanical) on product development.
• Liaise with supplier and operation for design improvement.
• Provide technical support of products introduced into both the domestic and international markets.
• Work closely with a multidisciplinary team to drive cost optimization, manufacturability, quality and reliability.
• Provide technical support during installation, commissioning, and maintenance of systems.

Requirements:

• Bachelor’s degree in electrical engineering or related field.
• Proficient in electrical design software tools
• Strong knowledge of electrical systems, power distribution, control systems, and circuit design.
• Strong problem-solving skills and attention to detail.
• Hands-on experience with hardware testing, troubleshooting, and equipment commissioning.
• Experience in microcontroller platform hardware design is a plus
• Knowledge of HVAC systems is a plus.

Tempserv Pte Ltd

License No: 06C3745

Ivy Ng Siew Hoon I EA Reg. No: R1102590

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Job Descriptions:

• Position : HVAC Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $6,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Engaged in all mechanical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Participated in design and construction document preparation and submissions.
• Conducted technical review and clarifications with customer and suppliers.
• Coordinated design efforts with other engineering disciplines.
• Participated in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Monitor the progress of the document submission.
• Performed some drafting scope and also guide drafters for drafting.

Requirements:

• Minimum Diploma/Degree in Engineering or related field.
• Relevant job experience in oil and gas/process/marine industry preferred.
• Must have basic mechanical design knowledge.
• Proficient in performing HVAC cooling capacity calculations, pressure drop calculations, and duct sizing.
• Experienced in duct installation and HVAC system installation.
• Skilled in creating piping and instrumentation diagrams (PID), Airflow diagrams, and ducting and instrumentation diagrams (DID).
• Knowledgeable in basic pipe sizing, selection, and pipe installation.
• Familiar with basic fire suppression systems.
• Proficient in using AutoCAD for drawing and design.
• Proficient in MS Office applications.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Description

• Position: Senior Mechanical Design Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $7,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Responsible as the lead for the overall Mechanical engineering project activities.
• Responsible for optimized Mechanical engineering man hour utilization within the project.
• Coordinate between the other trades & internal for engineering integration.
• Coordinate with Project Lead on Project Engineering’s & Procurement Schedule.
• Prepare & Review Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities.
• Review Vendors’ Technical Specification/ drawings to ensure completeness & correctness with our requirement.
• Prepare & Review Equipment Parameter & Mandatory Calculation.
• Prepare & Review Piping Schematics (P&ID).
• Prepare & Review Machinery & HVAC Layout, Equipment Installation & Alignment.
• Prepare & Review Mechanical design and construction standard.
• Review 2D and 3D for piping detail and production design.
• Prepare & Review Testing Protocol & Operation Manual.
• Guiding and checking Mechanical engineer activities.

Requirements:

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of relevant work experience in marine/offshore industry machinery and piping new-building engineering design.
• Proficient in AutoCAD, Microsoft Office, and AVEVA.
• Knowledgeable about rules and regulations from Classification Society and Authorities.
• Familiar with the theory and calculations related to marine/offshore mechanical and piping design.
• Strong communication and analytical skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

On behalf of our hiring client who is an Original Equipment Maker (OEM), we are looking for a suitable candidate to join them as Product Design Engineer (Electrical).

Responsibilities:

• Provide technical support to the Project team, Installation on problem verification, report and coordinate with Group on job site issues and technical solutions related to electrical design.
• Involving in design interfacing and parts provision among Group of companies.
• Participate in the resolution of design problems related to Error/Trouble investigation, and formulate corrective & preventive measures.
• Provide engineering support to Sales Team for new products.
• Provide Maintenance Works Inquiry/Spare Parts Inquiry/Order Supports.
• Any other ad-hoc matters assigned by the Manager.

Requirement

• Degree/Diploma in Electrical Engineering with at least 2-3 years experience in electrical design work.
• Proficient in Auto CAD & 3D software is essential
• Fresh degree holders are welcome to apply

EA license : 22C0971 | EA Registration : R21101298

Location: East

Summary:

• Basic up to $4500
• Yearly variable bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in Solidworks
• Familiar with CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in Solidworks & CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Description

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success, we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail and supply chain.

We are currently looking for Technical Delivery Architect (Post Sales) who has proven track record in IT Industry. This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Technical Delivery Architect (Post Sales)

About the Function:

This role provides End to End technical leadership and ownership for post sales engineering of customer solutions, engaging with Pre-sales, Product Engineering, Service Delivery, Service Assurance and the customer, through design, delivery and migration stages. Provide level 4 support for design-related support issues. Serves as a technical expert on solutions design and implementation requirements to address business needs. Analyses the functionality and constraints of recommended solution / changes across multiple systems/platforms/applications. Also plans and implement processes and systems for effective delivery of complex solutions sought by customers. Roles in this function require broad and deep technical knowledge and experience across varying infrastructure requirements, development, design and re-engineering.

Key Responsibilities:

• Post-sales design documentation, implementation and migration of advanced complex solutions for enterprise customers. Complex solutions consist of multi-product services. The TDA’s role is to ensure that these services interoperate and integrate into the customer environment.
• Such products consist of but are not limited to SDWAN, MPLS, Ethernet, IPSec VPN’s, VoIP, Video Conferencing, Orchestration, WAN Optimization, Managed Security Services, Cloud Services, Managed Hosting and Complex Migration Planning, Etc.
• In general, TDA engineers must be expert level certified in one or more disciplines. Have a broad understanding across the technical landscape within Telecommunications and Enterprise IT architectures and have a natural ability to converse with both technical and executive audiences.
• Basic Knowledge on programming & scripting including but not limited to Python, Yang, Perl, JSON, etc.
• The TDA will own the technical delivery of customer solutions and will be the technical interface between the customer, product teams and project management during service delivery.
• Close engagement with pre-sales, technically validating solutions proposed are deliverable and all technical aspects are clearly defined prior to contract signature. The TDA accepts technical ownership of the solution at the point of contract signature.
• Engaging with and supporting pre-sales during contracting, with project management during service realization and the training of Service Assurance, through design, delivery and handover into lifecycle management.
• Lead customer-facing technical workshops in the delivery phase requiring excellent communication
• with the ability to articulate technical concepts clearly to all levels of competency.
• 4th Line escalation. Providing support to 3rd line teams for OEM and design related faults.
• 
  

Qualification and Experience Required:

• 8+ years industry background.
• Experience & expertise in minimum 2 SDWAN OEMs design & deployments (Cisco, Versa and Fortinet preferred).
• Expert Level certification (Equivalent to CCIE) in technologies such as Routing and Switching, Service Provider, etc.
• Application Acceleration and Optimization.
• Excellent communication and documentation skills.
• Design related background.
• Ability to demonstrate technical knowledge & industry best practices under pressure.
• Basic Coding skills are desirable.
• Telecommunication Product or Solution Design related background.

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected] Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS:

Consultant Name : Seema Verma

Avensys Consulting Pte Ltd

EA Licence 12C5759

Privacy Statement:

We take your personal data protection seriously and adhere to both EU and local data protction regulations.

Upon submission of your CV, you grant Avensys Consulting permission to retain your personal information in our electronic database, unless you specify otherwise. This data will be used to evaluate your suitability for current and potential job openings within our organization. Should you wish to have your personal data removed at any point, a simple notification to us will suffice.

Rest assured, we will not disclose your personal information to any third parties, and we remain steadfast in our commitment to providing equal opportunities to all applicants.

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Looking forward on your resume. Please drop your resume to [email protected].

Regret to inform you that only shortlisted candidates will be notified.

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Looking forward on your resume. Please drop your resume to [email protected].

Regret to inform you that only shortlisted candidates will be notified.

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Looking forward on your resume. Please drop your resume to [email protected].

Regret to inform you that only shortlisted candidates will be notified.

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Highlights

• Comm + AWS + Quarterly Bonus
• Retail hours
• Art piece/ Highend/ Luxury

Responsibilities:

• Ensure high levels of customer satisfaction through excellent sales service.
• Maintain outstanding store condition and visual merchandising standards.
• Ensures the stock model, according to the guidelines set by the Company and carry out inventories according to the established periodicity.
• Collaborate into achieving the sales target.
• Good housekeeping of stores.
• Monthly stock take

Requirements:

• “O” level
• Min 2 years in retail industries

HOW TO APPLY:

Interested applicants, please email to “[email protected]”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Pierre Chung Yih Shern
EA Personnel Reg No: R22111092

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Satellite Systems

ST Engineering Satellite Systems Pte. Ltd. (SatSys) is a joint venture founded in 2010 by ST Engineering, DSO National Laboratories, and Nanyang Technological University. Today with our expertise and comprehensive suite of satellite engineering and test facility, SatSys design and develop satellite buses to integrate with various payloads, such as Electro-Optical (EO) camera, Synthetic Aperture Radar (SAR) and more, to meet the mission objectives of our customers.

Together, We Can Make A Significant Impact

We are looking for passionate and motivated individuals to take on the role of a Digital Electronics design engineer for space-borne data handling and communication products. You will be tasked to architect data-handling systems and design digital electronics modules for small satellites, which are innovative and yet commercially viable. You will be required to carry out FPGA development, for Microchip and Xilinx FPGAs, related to data handling, data storage and back-end signal processing applications. You are required to formulate the requirements, design specifications and verification plans for the digital electronics modules and system within satellites. You will be part of the Space Electronics team.

Be Part of Our Success

• Conceptualising, architecting and designing innovative data handling systems.
• FPGA development including programming, functional verification, timing closure and hardware testing.
• Digital Electronics design using state-of-the-art components.
• Test and Integration of Digital Electronics Modules into satellites.

Qualities We Value

• Knowledge in Electrical and Electronics Engineering / Computer Engineering or equivalent.
• At least 5 years of experience in Digital Electronics design and/or FPGA development.
• Design experience with Microchip’s Libero IDE and/or Xilinx’s Vivado toolkit.
• Understanding of electronics components such as FPGA, ADC, DAC, Microcontroller, Memories and Transceivers, and their applications in digital systems.
• Experience in communication systems, modulation types and back-end signal processing will be an advantage.
• Familiarity with interfaces such as CAN, RS422/485, LVDS, SPI and High-Speed Serial will be an advantage.
• Open-minded and eager to learn
• Team player with good communication skills
• Adaptable and able to work well with changes
• Detailed and methodical approach
• Singaporean only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Working Location: Ang Mo Kio

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

PERMANENT JOBS!

SINGAPOREANS/ PRs ONLY

PROJECT COORDINATOR | INTERIOR DESIGN

(Salary – $3,200 to $4,000)

Location

• 1 ANG MO KIO INDUSTRIAL PARK 2A Singapore 568049

Job Descriptions

• Provide support in all general Human Resource matters
• Able to manage projects independently
• Oversee project operations and liaise with clients, subcontractors and suppliers on project matters
• Ensure that project works are completed with respect to the scheduled dates
• Cost and quality control of projects
• Ensure that construction teams and sub-contractors adopt all necessary measures and comply with safety, environmental and other relevant legislation and requirements in the contract
• Good communication skills, able to interact with people of all levels and be teamwork oriented

Job Requirements

• Must be able to communicate in Mandarin with business partners
• Relevant working experience in related field andproven management abilities
• Effective communication and organizational skills
• Able to work night job
• With valid class 3 license will be an advantage

Interested candidates, please send in your CV to [email protected]

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

About our client: Our client is a leading global engineering, procurement, construction & management company, delivering large-scale high-tech, and industrial building projects.

About the role: Support the design and construction management of various Civil and Structural Systems for industrial buildings, with a focus on concrete and steel structures. Assist in the development, design, and execution of these systems across multiple projects.

Responsibilities:
- Support Project Managers in delivering projects on time, within budget, and following quality standards.
- Prepare, issue, and assess tender packages for construction projects.
- Collaborate with Architectural, Process, Mechanical, Electrical, and Quantity Surveying teams to ensure design and construction alignment.
- Address and resolve site-related design issues efficiently.
- Communicate and coordinate with consultants and subcontractors to ensure smooth project execution.
- Manage timely submissions and approvals from relevant local authorities.
- Stay updated on the latest industry practices, engineering trends, and technical advancements to maintain a high level of competence.
- Undertake additional duties as assigned by management.

About you:
- Bachelor's degree in Civil Engineering.
- 3 to 5 years of experience in design and construction.
- Preferably with experience in industrial building design and construction, with a focus on precast structures and long-span roof trusses.
- Hands-on site experience in piling, sub-structure, and superstructure works involving reinforced concrete, steel structures, and precast elements.
- Experience collaborating with Process, Mechanical, and Electrical teams, as well as Quantity Surveyors.
- Proven ability to liaise effectively with consultants and contractors.
- Experience in reviewing shop drawings for precast and steel structures, and providing detailed design input for computer-aided design teams.
- Strong knowledge of element design based on relevant codes and standards.
- Proficiency with structural design software such as STAAD-Pro, Prokon, Orion, or similar tools (if applicable).

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading global engineering, procurement, construction & management company, delivering large-scale high-tech, and industrial building projects.

About the role: Lead the design and implementation of Extra-Low Voltage (ELV) systems for large-scale projects, spanning the tender, design, procurement, construction, commissioning, and client acceptance phases. This includes designing control systems, instrumentation, cabling, and cable support systems for industrial, commercial, and process equipment facilities, with support from the Lead Engineer as needed.

Responsibilities:

• Laed the design of control systems, instrumentation, cabling, and cable support systems for industrial facilities, process equipment, and commercial buildings.
• Design and implement Life Safety Systems, including Public Address, Access Control, CCTV, Gas Detection, and Fire Alarm systems, with guidance from the Lead Engineer if necessary.
• Design IT cabling systems, with support from the Lead Engineer as required.
• Develop essential project documents such as P&IDs, instrument and I/O lists, Sequence of Operations, Logic Diagrams, and Cause-and-Effect matrices with support from the Lead Engineer.
• Manage ELV packages throughout the project lifecycle, including design, procurement, and construction, ensuring timely and successful completion.
• Coordinate and schedule ELV supervisors' activities to meet project milestones.
• Collaborate with other disciplines during the design phase to integrate their requirements into the ELV system design.
• Conduct technical evaluations of vendor submissions and approve shop drawings.
• Prepare procedures for testing and commissioning individual systems and oversee subcontractors during the commissioning phase.
• Supervise ELV engineers, designers, and draftsmen in preparing detailed design documents, such as cable routing plans, hookup drawings, wiring diagrams, schedules, and P&IDs.
• Prepare ELV system tender packages, including specifications and drawings.
• Ensure familiarity with the latest country codes, industry practices, and engineering trends.
• Contribute to tendering and estimating for ELV system works during the pre-award phase.
• Evaluate and provide recommendations during technical bid evaluations and project execution.
• Compile and review the Operation and Maintenance Dossier for projects.

About you:

• Bachelor's degree in Instrumentation and Controls Engineering.
• At least 8 years of experience in the design and construction of control systems.
• Proven experience in designing, installing, programming, and commissioning processes and building control systems.
• Expertise in designing, selecting, installing, and commissioning instrumentation for process and building control systems.
• Experience with Extra Low Voltage (ELV) systems, including Fire Alarm, Security Systems, and IT data networks.
• Background in advanced technology facilities, life sciences, chemicals, energy, environment technologies, high-tech infrastructure, and process automation.
• Solid experience in construction management, particularly in ELV systems.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Duties & Responsibilities

1. Conduct research on industry trends in EDA technologies and back-end processes, and create a development roadmap for digital back-end EDA technologies based on business requirements.

2. Analyze business needs for the digital backend, abstract business models, design competitive solutions, and collaborate with software development personnel to implement the solutions using EDA or in-house technologies.

3. Develop the digital back-end design end-to-end operation platform and develop a competitive physical design methodology.

4. Cooperate with digital backend experts to develop the AI optimization process for PPAC optimization.

Requirements:

1. At least holding a Bachelor's degree with a major in computer science, mathematics, or AI.

2. 5+ years of experience in developing AI applications, with a strong understanding of AI techniques.

3. Experience developing machine learning and LLM.

4. Familiar with data structure, dynamic programming, multi-threading, distributed computing, and other heuristics algorithms.

5. Experience with C++ programming in a Linux environment. Familiarity with scripting languages such as Tcl/Python/Yaml.

6. Familiar with commercial EDA digital chip physical design tools and ASIC design flow; including static timing analysis, logic synthesis, P&R, optimization, CTS, Route, and other domains.

7. Familiar with algorithms and optimization methods such as layout design, layout floorplan and routing, statistical timing analysis, physical synthesis, power consumption analysis, and delay calculation.

8. Experience with front-end and back-end tools at advanced technology nodes, preferably with cutting-edge EDA tools.

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Create comprehensive electrical circuit diagrams for automation and equipment systems.
• Assess, integrate, and validate hardware to ensure compliance with technical specifications.
• Produce CAD drawings depicting electrical circuits.
• Assist in diagnosing and resolving issues with system assembly, operation, and testing.
• Aid in equipment setup, problem-solving, and occasional installation.
• Provide assistance in testing new hardware and applications in-house.

Requirements

• Experience in automation machine design, proficiency in Electrical Design Software, electrical/electronic circuits and test instrumentation

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860

Only Shortlisted candidates will be notified

Quek Jian Wei

Reg No. R22110928

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.


Responsibilities

• Specify requirements and features for semiconductor equipment.
• Conceptualize and establish the architecture of innovative equipment.
• Engineer mechanical systems, incorporating the selection and utilization of motors, actuators, gear drives, pumps, and valves.
• Generate intricate engineering drawings.
• Conduct design verification and validation testing to guarantee adherence to specifications, safety regulations, and product requisites.
• Enhance the design of existing machines.
• Utilize analysis tools such as Fish Bone Diagram, FMEA, etc. to optimize processes.

Requirements

• 5 years of experience in semiconductor equipment design
• Expertise in designing automation and high precision machinery, including High-Speed Pick and Place mechanisms
• Proficient in 3D CAD software and equipment troubleshooting
• Capable of producing detailed mechanical drawings and applying knowledge of Geometric Dimensioning & Tolerancing

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

About our client: Our client is a leading global engineering, procurement, construction & management company, delivering large-scale high-tech, and industrial building projects.

About the role:

· Drive the progress of all design elements in alignment with the Design Checklist.

· Prepare electrical tender packages, including specifications and drawings.

· Stay updated on industry trends and best practices to maintain technical competency.

· Manage the tendering and estimating process for electrical works prior to project award.

· Compile and review the Operation and Maintenance Dossier for projects.

Responsibilities:

· Ensure the System Supervisor receives the latest shop drawings, space management drawings, specifications, approved technical submittals, and any scope changes.

· Provide the System Supervisor with a comprehensive briefing on the awarded scope of work, the tender technical documents, and any contractual revisions to the tender documents.

· Evaluate technical submittals to ensure compliance with project specifications and client requirements.

· Approve Test Packs throughout the construction process, ensuring each step is completed properly.

· Communicate testing and commissioning criteria to the System Supervisor.

About you:

· Bachelor's degree in Electrical Engineering.

· 10 years of experience in electrical design.

· Advanced proficiency in Microsoft Office software (Word, Excel, Outlook, PowerPoint), as well as PDF document generation and management.

· Strong foundational knowledge in electrical design, specifically in areas such as: Lighting Design, Cable Calculations, Short Circuit Calculations

· Basic understanding of local codes and practices for design implementation.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg. No: R1325507

• Basic up to $4,500 + Variable Bonus
• Monday – Friday, 9am – 6pm
• Location: Aljunied

Responsibilities

• Coordinate M&E works on-site and manage drawing data updates.
• Communicate project updates, coordinate actions, address issues, and contribute to meetings and reports.
• Oversee daily site activities, including supervision and coordination of subcontractor work.
• Liaise with clients and consultants regarding project progress.
• Prepare reports, documentation, and assist with the Operation and Maintenance manual.
• Ensure compliance with regulations by preparing necessary permits, plans, and reports.
• Support tender exercises, pre-construction surveys, and As-Built drawing updates.

Requirements

• Min. Diploma or 2 years of experience in M&E works related to interior design fit out works, including Electrical, ACMV, Plumbing, and Fire Protection.
• Proven experience in project management, including A&A works, M&E services, As-Built drawings, site supervision, coordination, and compliance with regulations.
• Fluent in MANDARIN and English to liaise with Mandarin-speaking associates.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected]

**Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752
EA. Registration No.: R24123733 | Chen Yit Keat

Evaluates project information, confers and corresponds with client representatives in coordination with the

Project Manager/Principal to determine project parameters and requirements.

Develops design concepts for project(s).

- Leads design development of client’s interior program through development of photographic image studies.

- Develops interior design to meet the client’s programmatic requirements and assure technical suitability.

- Develops conceptual ideas graphically.

- Leads design charettes.

Participates directly in each project from programming through project completion.

Leads presentation and design drawings.

Be the creative head.

- Develops block plans and bubble diagrams.

- Leads and reviews design details.

- Corrects / revises drawings with minimal supervision.

Coordinates with design team to ensure integration of design and interior design elements.

- Provides guidance to other members of the design team to ensure that design documents are in appropriate formats.

- Participates in all charettes.

- Monitors and sometimes coordinates the design work of consultants.

Is responsible for quality control for the interior design function, including:

- Accuracy of each segment of work as it is completed.

- Conformance to company design standards.

Project Management

- Establishes program with Project Manager/Principal.

- Responsible for all projects within the team.

- Participates in determining the skills required of other team members for the project and the selection of those team members.

- Prepares progress reports. Alerts Project Manager to any changes in scope, lack of information or decisions from client.

Oversees interior design aspects of construction:

- Assists with construction oversight for general conformance with the interior design concept.

- Responds to construction questions as they relate to interior design issues.

Directs / supervises the gathering of the technical specifications for various interior design elements (FF&E).

- Selects and directs materials for project.

Confers and corresponds with client representatives, to determine project parameters / requirements; participates in design presentations.

Directs construction of finish boards.

Participates in the development of “in-house” design standards; assures that design policies, procedures, standards and philosophies are adhered to.

Responsible for personal and staff development

- Performs senior staff development duties such as mentoring, training, supervising and directing junior staff.

- Participates in management and leadership groups.