Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Position Overview:

We are looking for a motivated and skilled Mechanical Design Engineer to join our dynamic team. In this role, you will be responsible for designing, analysing and overseeing the structural integrity of mechanical systems and components for our products. These include specialty vehicles, engines and shelters. This role demands a strong understanding of mechanical design, vehicle systems, and relevant automotive and/or military standards, with a focus on ensuring high performance, reliability, and operational effectiveness.

Key Responsibilities:

· Develop and optimize mechanical designs for mechanical and automotive systems, focusing on efficiency, manufacturability, and sustainability.

· Collaborate with multidisciplinary teams, including electrical and software engineers, to create innovative solutions that meet customer needs.

· Utilize advanced CAD tools (such as SolidWorks) to create 3D models and detailed engineering drawings.

· Perform simulations and analysis to validate designs and ensure they meet performance and safety criteria.

· Create prototypes and conduct hands-on testing to gather data, evaluate performance, and refine designs.

· Participate in design reviews and contribute to brainstorming sessions to drive continuous improvement and innovation.

· Maintain thorough documentation of design processes, test results, and compliance with industry regulations.

· Stay updated on industry advancements and incorporate new technologies and methodologies into your work.

· Support manufacturing team with technical guidance to ensure smooth production processes and troubleshoot any design-related issues.

Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree or higher qualification is a plus.
• At least 2 years of experience in mechanical design engineering, ideally within the automotive sector.
• Proficiency in 3D CAD software (e.g. SolidWorks) and familiarity with simulation tools (e.g. FEA, CFD).
• Strong knowledge of mechanical design standards, materials, and manufacturing processes.
• Excellent analytical and problem-solving skills with a focus on innovative solutions.
• Effective communication skills, both written and verbal, with the ability to collaborate in a team-oriented environment.
• Results-driven and detail-oriented mindset with a passion for engineering excellence and continuous improvement.

Preferred Skills:

• Strong communication and teamwork skills
• Experience with automotive and/or military vehicle standards and protocols
• Familiarity with vehicle system design and testing procedures.
• Knowledge of mechanical engineering principles as they apply to vehicle systems and structures.
• Experience with project management and leadership in a technical environment.

What we offer:

· Competitive salary and benefits package

· Opportunities for career advancement and professional development

· Collaborative work environment that fosters innovation and communication

· Mentorship and guidance on best practices in automotive and mechanical design

· Opportunity to work on exciting projects at the forefront of automotive technology

Seeking a meaningful design internship?

Expand Your Creative Limits with APT811: Where Design Meets Innovation

We’re seeking a design intern to join our small, lean team. Our goal is to give motivated designers the chance not just to be creative but to be strategic and thinking designers.

Needed: Basics in graphic communication design, visual hierarchy, Adobe CC (Photoshop, Illustrator, InDesign), and Figma.

This role is for those ready to integrate AI into design and work closely with our founders. It is ideal for individuals with a growth mindset looking to improve their design strategy and execution.

Our four pillars guide your growth: technical skills, strategic thinking, personal growth, and social influence. Progress through a structured path to develop your abilities.

What’s in it for you at APT811:

• Use professional AI design tools
• Create impactful designs with clarity
• Learn effective brand communication
• Strengthen your growth mindset
• Access a wealth of training resources

Work Responsibilities

As an intern at APT811, you will play a vital role in our team, contributing to various projects and honing your skills. Your responsibilities will include:

Brand Communication and Research:

• Work on brand communication touchpoints.
• Conduct research using AI tools like Custom GPT, Midjourney, and SEMrush (SEO).
• Analyse market trends and competitor strategies.

Design and Development:

• Create brand and campaign collaterals.
• Design brochures, posters, digital ads and various touchpoints.
• Ensure all designs align with brand guidelines.

Workshop Facilitation:

• Assist in planning and organising design thinking workshops.
• Support facilitators during sessions.
• Engage with participants and gather feedback.

Proposal and Presentation Support

• Help draft and design brand proposals.
• Contribute creative ideas and concepts.
• Develop visual narratives for presentations.

Continuous Learning and Application:

• Learn and apply new design software and tools.
• Participate in brainstorming sessions.
• Engage in training sessions and workshops to improve your skills.

If you have a growth mindset, like strengthening your resilience and thinking strategically, we'd like to work with you!

Apply today and do good with design together.

www.apt811.com | www.thinkroom.sg

Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Highlights:
✅ Competitive salary
✅ Career growth opportunities
✅ Work with advanced technologies
✅ Collaborative team environment

Job Description:

• Collaborate with the design team to develop chip floorplans, clock structures, and power plans.
• Perform physical design tasks from Netlist to GDSII, including placement and routing (P&R), formal verification, and static timing analysis (STA).
• Conduct physical verification (PV) and power integrity analysis to ensure design reliability.
• Optimize designs for power, performance, and area (PPA) while adhering to project requirements.
• Research and implement methodologies for advanced process nodes.
• Develop and maintain automated physical design workflows and tools.
• Ensure designs meet quality and performance standards for tapeout readiness.
• Troubleshoot and resolve physical design issues during development.

Requirements:

• Bachelor’s degree or higher in Electronic Engineering, Microelectronics, or related fields.
• 3+ years of experience in digital backend design (5+ years preferred); tapeout experience is a plus.
• Proficiency in TCL, Perl, or Python scripting and EDA tools is an advantage.
• Strong communication, teamwork skills, and self-motivation.
• Competitive salary for outstanding candidates.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Lee Cheng Yin (Gina) (R22104523)

EA License No: 20C0358

Job role:

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 3 years of work experience in the digital backend design field.

3. Hands-on project experience is required.

4. Tapeout experience at advanced technology is prefered.

5. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

The Architectural Design Manager reports to the Project Manager and Project Director and ensure all architectural works are carried out as per approved architectural drawings and specifications. He/She is to verify all interface details are carried out as per drawing plans.

• Plan, design and supervise the construction of buildings and other physical infrastructure.
• Coordinates and integrates engineering elements into unified design for client review and approval.
• Carry out Architectural work scheduling, material requisition, cost control, project supervision, documentation and seeking Client’s approval
• Produces conceptual plans, renderings, and documents.
• Engaged in preparing drawings and specification documents for the Conceptual Design Phase, Schematic Design Phase, and/or the Detailed Design Phase of a project.
• Works in tandem with Consultants, Sub-contractors as well as with other technical departments (Structural, M&E Engineers and Quantity Surveyors) on the design intent requirements and raise technical clarifications for smooth progress of work
• To resolve architectural related issues with stakeholders

Requirements:

• Degree in Architecture
• Minimum 10 years of relevant experience in LTA project or Building project

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples, mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 4 years of local working experience OR
• Diploma in Architecture with minimum 5 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

Design Assistant

Your primary roles are to create 3D models for RISIS products (jewellery, lifestyle, and sculpture), to operate our Rapid Prototyping (RP) Machine, to do 3D scanning of RISIS products and to do any modifications on the 3D scanned models. You are required to work closely with the Designers (Sculpting, Jewellery & Lifestyle) to generate high quality 3D-printed models for visualization or production purposes. You must analyse, evaluate, and repair CAD models suitable for Additive Manufacturing. In addition, you may be tasked to design and model corporate gifts products to enhance your knowledge and skills so that you have a better understanding of the whole process from conceptualizing, developing, and producing premium gifts.

Key Responsibilities:

• To create 3D models based on 2D drawings.
• To be able to visualize, create and repair CAD files/data (.STL, .OBJ, .3DM).
• To generate 3D models as per specifications given, either by scanning or by using company-provided 3D modelling software within the required deadline.
• To generate 2D image renders for visualization based on 3D models.
• To operate and conduct regular maintenance of our Rapid Prototyping Machine.
• To liaise with suppliers on the purchasing of all necessary materials used for producing CAD models and other relevant 3D matters.
• To keep proper stock records, manage the sufficient supply and usage of all 3D related consumables.
• To keep a monthly maintenance logbook for the Rapid Prototyping Machine.
• To perform post-processes and provide high QC for 3D printed jobs.
• To maintain, update, and follow through 3D printing SOP to achieve the most optimal output and for the success of the 3D printing results.
• To perform preventive maintenance on the Rapid Prototyping Machine as and when needed to keep the machine always in ‘tip-top’ condition.

Other Responsibilities

• To support relevant sales department to do visuals for corporate project proposal.
• To co-ordinate and perform any tasks assigned by the Design Manager.
• To assist Designers with Design Order Form to relevant factories or suppliers when necessary

Requirements

• Diploma / degree in Fine Arts or related discipline.
• Preferably with 1–2 years of experience in similar capacity.
• Working knowledge of 3D design software packages.
• Ability to work well in a team.
• Meticulous and able to meet tight deadlines

The Architectural Design Manager reports to the Project Manager and Project Director and ensure all architectural works are carried out as per approved architectural drawings and specifications. He/She is to verify all interface details are carried out as per drawing plans.

• Plan, design and supervise the construction of infrastructure.
• Coordinates and integrates engineering elements into unified design for client review and approval.
• Carry out Architectural work scheduling, material requisition, cost control, project supervision, documentation and seeking Client’s approval
• Produces conceptual plans, renderings, and documents.
• Engaged in preparing drawings and specification documents for the Conceptual Design Phase, Schematic Design Phase, and/or the Detailed Design Phase of a project.
• Works in tandem with Consultants, Sub-contractors as well as with other technical departments (Structural, M&E Engineers and Quantity Surveyors) on the design intent requirements and raise technical clarifications for smooth progress of work
• To resolve architectural related issues with stakeholders

Requirements:

• Degree in Architectural
• Minimum 10 years of relevant experience in LTA project or Building project.

JOB HIGHLIGHTS

· Machine design in Mechanical aspect, Jig and Fixture, Equipment and development

· Provide Conceptual, mechanical part detailing and cost estimation

· BOM & machine manual writing

· Handle customers’ enquiries and issues

· Conduct machine acceptance with customer

· Co-ordination with sub-contractors for machine build

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

REQUIREMENT

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

· Able to work independently and within schedule

THE ROLE:

As a member of the SoC Physical Integration team, you'll interface with various engineering groups, including architecture, design, CAD, software, and product engineering, across various geographies to work towards the physical/electrical verification and tape out of AMD SoC FPGA/ACAP devices. Common essential duties and responsibilities include, but are not limited to:

• Defining and developing flows and methodologies for chip level integration
• Developing tools for design verification or efficiency
• Designing (RTL and custom), verifying, and integrating FPGA/ACAP sub-blocks
• Coordinating activities between different design groups to ensure smooth integration
• Executing chip level physical verification
• Executing chip level electrical verification

PREFERRED EXPERIENCE:

• Basic understanding of FPGA architecture
• Knowledge of and/or experience with design and verification tools such as Virtuoso and Calibre
• Knowledge of and/or experience with P&R tools
• Fundamental circuit design knowledge including simulation experience with Spice and Verilog
• Strong debug skills
• Scripting experience using Perl, Python, TCL, C-shell, Make and/or other scripting languages
• Knowledge and experience with basic Unix data management and job control
• Excellent written and oral communication skills

ACADEMIC CREDENTIALS:

• BS with 2+ years of exp or MS in Electrical Engineering, Computer Engineering or related equivalent

LOCATION:

Singapore

• Design/design management/coordination of infrastructure projects related to underground structures, deep excavations, and or civil works.
• Ensure engineering deliverables meet client expectations and the basis of design.
• Liaise with Senior Engineers, QP and local authorities.
• Degree in Civil Engineering.
• Minimum 3 years of design/design management/design coordination experience.
• Interdisciplinary coordination experience will be an added advantage.
• Fast learner with high aspiration for professional growth.

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples, mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 6 years of local working experience OR
• Diploma in Architecture with minimum 8 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

WE ARE HIRING!!!

Able to work independently!

Job description:

❃ Cashiering

❃ Managing daily operations

❃ Inventory management

❃ Playing with children and help them with their arts!

❃ Other ad-hoc duties

Job details:

❃ Flexible days to work

❃ Working hours

Weekdays 12pm-9pm

Weekends 9.30am-9.30pm

❃ Psst! You are able to sit during working hours!

Working Location:

AMK HUB

Interested applicants please send your details to the following, do not call:

WHATSAPP: 8.8.4.9.7970

Pixel Tech is a packaging printing company known for delivering innovative and high-quality design solutions. We are currently seeking a talented and creative Senior Art Director to join our team. This role offers the opportunity to work on diverse projects, including packaging, marketing collaterals, and advertising materials, helping translate our clients’ business strategies into visually compelling designs.

Key Responsibilities:

• Conceptualize, develop, and produce graphic designs and layouts that are visually engaging and aligned with the brand’s identity.
• Design marketing collaterals such as brochures, flyers, and digital assets, ensuring consistency with the client’s brand guidelines.
• Collaborate directly with clients to gather and understand design briefs, ensuring design solutions meet their needs.
• Resolve creative challenges and provide innovative design solutions throughout the project lifecycle.
• Stay current with design trends and incorporate fresh ideas into all projects.

Requirements:

• A Degree in Graphic Design, Visual Arts, or a related field.
• At least 5 years of professional experience in a design studio, agency, or a similar design field.
• A strong portfolio showcasing your creative thinking, design skills, and knowledge of the printing process.
• A keen eye for detail with a focus on color, typography, and layout.
• Proficiency in Adobe Creative Suite (InDesign, Illustrator, Photoshop, After Effects).
• Excellent interpersonal and communication skills, with the ability to interact confidently with clients and team members.

Responsibilities

• Coordinate with internal team in Singapore liaise with customers / consultants on day to day basis
• Preparation of project documents including BQ
• Handling Design & Build projects
• Prepare optimised design solutions for projects
• Prepare Design drawings (Single Line Drawings & layout)
• Prepare design calculations incl voltage drop, short circuit current etc.
• Support multiple M&E projects concurrently
• Lead project meetings and work with team members to achieve the deliverables on-time
• Ensure drawings & documents are well maintained & stored in a timely manner
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Electrical Engineering
• Minimum 2 yrs of relevant hands-on M&E experience in construction industry, LTA projects, mixed development etc
• Need to be familiar with Singapore codes such as SS638 (CP5), SS650, SS555 etc
• Hands-on experience in AutoCAD drawings is preferred
• Familiarity in BIM (Revit / Navisworks) is advantageous
• Having consultancy experience is preferred
• Possess effective organizational and follow-up skills, meticulous
• Good communication skills
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team, ISP Design leaders in other sites, and Digital System Design Team
• Leading, supervising and mentoring a team of RTL design engineers

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 7+ years of Digital Design and verification related experience
• 3+ years project management / people management experience / skill
• Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Ability to lead teams and collaborate effectively with people in different functions
• Strong time management skills to ensure timely completion of deliverables
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

The Role

This position will work with Asset Managers in leading all aspects of design development works, including overall development management of new developments and existing assets across different sector classes ranging from commercial, retail, residential, industrial and logistics projects.

Job Responsibilities

• Conceptualise all development design requirements including preliminary massing, schedule of areas and specifications and formulate design briefs to ensure that these are aligned with the Company’s development strategy.
• Manage and control the development of design concepts/options, pipelines for the projects and to ensure these options/concepts are delivered on time and meet the Asset Manager’s Requirements.
• Manage the design consultants and liaise with all relevant authorities to meet the Company’s development strategy and Asset Manager’s requirement.
• Accountable and responsible for the management of the design development process from inception to completion.
• Ensure that the design meets the required quality and in compliance with regulatory requirements and corporate governance.

Job Requirements

• Master and/or Degree in Architecture.
• At least 8 years of relevant design development experience in the execution of Commercial, Retail, Residential, Industrial and Logistics projects, with the ability to draw, design and articulate key construction details for the building.
• Candidate with experience in Japan, Hong Kong, South Korea, or Vietnam projects is preferred.
• Technical skills in Autocad, Revit, Sketchup, Adobe in Design, Adobe Photoshop, Adobe Illustrator, Rhino, Grasshopper.
• Knowledge of parametric design and ability to write scripts would be an advantage.
• Technical skills in producing and developing architectural details and specifications.
• Seeks continuous improvement to design and processes through consistently challenging the status quo or value engineering the optimum solution to all aspects of the development.
• Ability to encourage the creation of solutions appropriate to the needs of Business Units, shareholders and environment.

We encourage you to apply if your work experiences and career aspirations are aligned to this position.
To learn more about Mapletree and explore other opportunities, please visit https://careers.mapletree.com.sg/

Job Description:

1. Contribute to defining product specifications, microarchitecture, and implementation for high-speed memory interfaces.

2. Perform RTL coding, LINT checks, and initial testing of designs.

3. Collaborate with the verification team for debugging in the lab.

4. Work closely with the software team and/or customers to troubleshoot, debug, and optimize system performance.

Job Requirements:

1. Bachelor’s degree in Communications, Electronic, or Computer Engineering;

2. 6 of experience in ASIC design, with a strong understanding of the ASIC development process.

3. Proficiency in Verilog HDL coding and EDA tools for synthesis and timing analysis.

4. Experience with high-speed interfaces (e.g., DDR, SerDes, PCIe) is a plus.

5. Strong problem-solving skills and the ability to deliver results within deadlines.

6. Excellent organizational and communication skills.

Interested candidate please send your resume to [email protected]