ONSITE JOB PROFILE

In this onsite role, the engineer is expected to perform the following tasks:

1. Support the customer in design concessions work by following applicable standards and working procedures.

2. Assist in providing design solutions for semiconductor components concessions. Semi conductor fab equipment’s components includes,

a. Power distribution units & Schematics review

b. Cable assembly design & BOM release

c. Support the assembly at manufacturing area.

d. Project schedules & Delivery.

3. Support in study of non conformance of concessions from design point of view.

4. Prepare drawing pack which includes all relevant assembly and components drawings.

5. Prepare design answer which includes solution for clearing the non conformance with appropriate sketches, recommendations and specifications.

6. Delivery of design assessment report for concessions.

7. Support manufacturing & assembly teams

REQUIRMENTS TO PERFORM THE JOB DUTIES

a) Bachelor of Engineering / Technology (B.E. / B. Tech: equivalent to BS) in Electrical Engineering.

b) 6-10 years of experience in Electrical Testing design and ECO coordination.

c) Knowledge of AutoCAD , PLC and cable design

d) Desire for continuous education and training effort.

e) Excellent written and verbal communication skills and ability to interact with all levels within engineering organization.

Carpentry supervisor

Working Day: 6 days
Working Hours: Monday - Saturday 8am - 5pm
Location: Woodland
Salary: $2800- $3500 ( Depend of experience)

Job Description:

• Supervise carpentry staff and provide direction
• Monitor and inspect work to ensure quality
• Perform maintenance, repairs, or installation of carpentry projects
• Take measurements and calculate the size and amount of material needed
• Cut, shape and other material according to measurements

Requirement:

• At least 3 years relevant working experience
• Understand detail drawing of carpentry
• Experienced and ability in this field of work such as to fabricate complicated carpenters and installations
• Able to arrange site works for workers

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Build blazing fast page speeds
• Build reusable components/primitives
• Delightful user interactions and affordances
• Work with the team to review PR, and make the codebase robust.

Job Requirements

• 5 years experience at tech startups with millions of DAUs
• Solid knowledge of TypeScript, and experience with Next.js, etc.
• Basic backend skills with Node.js, building REST APIs, working with databases
• Knowledge in Bitcoin and mining concepts
• Strong written and verbal communication skills

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

• Reporting to the General Manager and responsible for technical specification and definition of industrial systems, products and solutions including system and product design, technical sourcing of such systems / products and digitization applications

• To attend technical review with sales team and technical meetings with clients

• To attend coordination meetings with architects, M&E and structural consultants

• To lead a small team of designers; monitor project design submission schedule, check designs and shop drawings, training designers, etc.

• To attend technical meetings with main contractors. Coordinate pipe clashes with M&E and structural services

• Detailed job responsibilities will be provided upon application

Requirements:

• Bachelor/Master’s Degree in mechanical engineering, automation or relevant fields

• At least 8 years product and application experience in Construction/Engineering industry

• Good business negotiation and presentation skills

• Excellent communication skills with multinational customers and colleagues.

• Good leadership to lead technical team for business growth. Exhibit flexibility and agility

• Able to work independently with professional judgments, proactivity and team player spirit.

• Willing to take up challenging assignments

• Revit & AutoCAD proficient

• Candidates available immediately or short notice preferred

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality,

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

Job Description

Sea Forrest Engineering Pte Ltd (a subsidiary of BH Global Corporation Ltd) seeking a skilled and experienced Electrical Design and Commissioning Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing and commissioning complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Responsibilities

1) Electrical Design

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) Commissioning and Integration

• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.

3) System Optimization and Performance Enhancement

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

4) Documentation and Reporting

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.

5) Regulatory Compliance and Safety

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Requirements

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design and commissioning, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel to shipyards and vessels for commissioning activities.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Requirements:

· Degree in Architecture

· Min. 3 years of project working experience in Singapore

· Experienced with entire project processes including authorities submission & site inspections

· Able to manage various project types independently

· Liaise and communicate closely with clients' reps, consultants & contractors

· Proficient in AutoCAD & Adobe Suite softwares

· Skills- project management, contract administration, design, & presentation

Job scope:

· Independently ensure the achievement design intent whilst complying with various technical requirements from external bodies or, with regard to approved major architectural projects, through various project stages to its completion.

· Produce architectural drawings as directed by the Directors & as required for the project, in an effective, efficient & professional manner.

· Assist in the design presentation of architectural projects.

Roles & Responsibilities

The Senior Quantity Surveyor is responsible for all cost and contractual issues on Main contract as well as Sub-contracts connected to the project.

A summary of the responsibilities for this position is, and not limited to, as follows:

• Preparation of Monthly Progress claims, variation orders and payments to subcontractors
• Involve in managing and reporting of project budget & cost control
• Responsible in Post-Contracts administration for both the Main Contract and Subcontracts.
• Monitor all financial aspects of the projects to ensure projects run according to budget
• Liaise and establish rapport with consultants, quantity surveyors, architects, developers and contractors on certification of claims for payment
• Be familiar with various stages of projects so as to source for the most viable yet reasonable priced materials.
• Able to share new perspectives on cost, orders and claims.
• With the understanding of the contractual legal rights, he/ she will be involved in advising the management on their position of the contract from the tender stage

Skills and Requirements

• Degree/Diploma in Quantity Surveying, Building or Civil Engineering
• Minimum 10 years working experience in SINGAPORE tendering, estimating and measurement of quantities on buildings projects worth at least $100 million.
• Good analytical skills
• Candidates with knowledge in Singapore Institute of Architects (SIA) Conditions of Contract, REDAS, FIDIC, FIDIC Short Form of Contracts will be an added advantage

Email resume to [email protected]

Established in 2020, Riot Singapore Studio has been expanding our footprint in Asia and accelerating our talent growth to develop games that deliver great experiences to our players. Our mission is to “scale Riot’s games to hyper-serve players.”

We partner with our LA headquarters on game development for League of Legends, Teamfight Tactics, VALORANT and 2XKO. The Singapore Studio is seeking talented, passionate craft experts with backgrounds in all areas of game development to build games that make it better to be a player.

We’re focused on working together to promote individual autonomy, ownership, collaboration, and inclusivity, so everyone can be their best while we boldly pursue games.

That's where you come in.

As a Concept Art Lead in the Singapore Studio, you will channel your knowledge of concepting, modeling, and texturing to help tell stories through visually compelling characters, creatures, props and illustrations.

You’ll expand and support a high-performing external team and give them the guidance and context they need to deliver amazing concepts that set industry standards on craft, meet all technical requirements, and match the League of Legends art style.

Through a mix of craft training and hands-on leadership, you will level up the team’s craft, mediate and resolve craft disagreements and misalignment, and keep the team motivated towards creating excellent experiences for our players. Using your broad knowledge of art, craft, and technique, you’ll set clear goals for your team and make sure the process of delivering those goals is as smooth as possible for your team and their stakeholders.

You will partner closely with the product teams and other artists, ensuring that art quality is excellent and is able to effectively promote and align with larger products. You will maintain your craft skills, inspire creativity and keep a high-quality bar with hands-on work as you deem necessary.

Responsibilities:

• As an Art lead on the team, you will oversee and be accountable for the quality of the work the team delivers and set the bar for excellence
• You will build a world-class team by sourcing AAA Concept talent in China and developing and growing their concept skills through training and feedback
• You will establish and maintain a highly engaged, creative, and motivated workspace for your team to unleash people’s potential.
• You will be responsible for driving innovative ideation and design aspirational concepts to set up other disciplines for success.
• You will collaborate with Rioters in Singapore and worldwide to make sure product goals are fulfilled, and working practices are appropriate
• You will set a clear vision and strategy to grow your team, provide consistent feedback, and build trust with your team
• You will drive the concept development for 2D and 3D art products
• You will lead and improve team rituals to support high-quality craft and individual growth
• You will accomplish your mission with complete autonomy if needed; you're dedicated to vigilantly finding creative and effective solutions to eliminate complex problems.

Required Qualifications:

• Demonstrated experience working directly with an outsource vendor either as an Art Outsource Manager or as a Concept Art Lead
• 5+ years experience in the video games industry
• 2+ years experience of management experience
• Extreme proficiency in art fundamentals such as anatomy, composition, design, and color theory
• A clear understanding of the League of Legends art style
• Proven experience leading/mentoring teams and individuals. Growth minded and motivated toward teaching, enabling, and coaching other artists
• Experience giving thorough direction and delivering timely, clear, actionable feedback
• Strong background in concept art and a good understanding of technical limitations for 3D assets.
• A strong communicator and able to convey abstract/sophisticated ideas concisely in English or Chinese

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

Job Responsibilities:

• Develop Low-Power Design Workflows:
  Own the design process to minimize power consumption while ensuring performance and reliability using advanced tools and techniques.
• Full-Chip Floor Planning and Routing:
  Lead floor planning and place-and-route efforts to optimize chip area and meet performance, area, and power goals.
• Power Network Design:
  Create and analyze robust power networks to ensure performance, minimize losses, and support low-power goals.
• Timing Closure and Signoff:
  Collaborate with teams to resolve timing issues and manage power and signal integrity for design verification.
• Physical Verification (DRC and LVS):
  Ensure compliance with layout and manufacturing rules through DRC and LVS for a tape-out-ready design.
• Cross-Team Collaboration:
  Work with engineers across functions to align designs with chip architecture and solve design challenges.
• Continuous Improvement:
  Stay updated on design advancements and improve workflows for better efficiency and low-power optimization.

Requirements:

• Educational Background:
  Bachelor’s degree or higher in Electronics, Computer Science, Electrical Engineering, or a related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience:
  Minimum X years in physical design with a focus on high-performance, low-power designs. Must have tape-out experience and familiarity with advanced semiconductor technologies (12nm and below).
• Technical Expertise:
  Proficient in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Strong knowledge of power network design, IR drop analysis, and timing closure with static timing analysis (STA) tools like PrimeTime.
• Software Knowledge:
  Experience with tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Experience:
  Hands-on expertise in place-and-route methodologies for optimizing performance, power, and area.
• Soft Skills:
  Excellent communication and collaboration skills to work effectively in multidisciplinary teams. Strong problem-solving and critical thinking abilities to address design challenges.
• Preferred Skills:
  Experience with advanced low-power techniques, deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, and design-for-manufacturing (DFM) principles.

Responsibilities:

• Responsible for the mechanical design and development of electronic automation equipment.
• Design and review projects to meet customer requirements.
• Work with Production department to optimize design to minimize error.

Requirements:

• Min. Diploma in Mechanical or Mechatronic Engineering
• 2 to 10 years experience in electronic automation equipment design
• Proficient in Solidworks software
• Knowledge of Pro Engineer software will be an added advantage

Interested applicants, please send in your detailed resume including your current & previous working experiences as well as current and expected salary to [email protected]

We regret that only shortlisted candidates will be notified.

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

Job Description/Job Scope

1. Modeling of emerging data storage systems

2. Assist the development of channel coding algorithms and techniques

3. Implement the developed algorithms into Matlab and C/C++ software packages

Qualifications, Skills, Experience

1. A Bachelor degree in Electrical Engineering

2. Fundamental knowledge on Error Correction Coding, Digital Communications, and Signal Processing

3. Matlab and C/C++ programming skills

Job Responsibilities:

• Lead Analog Circuit Design and Optimization:
  Direct the design and optimization of complex analog circuits, leveraging advanced schematic capture and simulation tools to achieve superior performance and reliability across diverse operating conditions.
• Drive Digital Standard Cell Library Development:
  Oversee the creation of high-performance, low-power digital standard cell libraries, ensuring alignment with stringent performance, power, and area specifications.
• Innovate Cutting-Edge Cell Architectures:
  Develop and implement advanced digital standard cell architectures, introducing innovative solutions to enhance design efficiency and meet evolving technological demands.
• Guide Layout Implementation:
  Provide strategic oversight to layout teams, ensuring accurate, efficient, and manufacturable physical implementations that adhere to performance and reliability goals.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s/Ph.D.) strongly preferred.
• Experience:
  10+ years in analog design and digital standard cell development, with expertise in deep sub-micron process technologies (12nm and below) and proven tape-out leadership.
• Advanced Technical Skills:Deep expertise in analog design, power optimization, and noise analysis.
  Mastery of tools such as Cadence Virtuoso, Spectre, and HSPICE for design and simulation.
  Extensive experience in digital standard cell library creation, optimizing for power, performance, and area.
  In-depth knowledge of deep sub-micron challenges, including layout optimization and power delivery strategies.
• Leadership and Communication:
  Demonstrated ability to lead cross-functional teams, mentor junior engineers, and foster innovation. Exceptional communication skills to articulate complex concepts and align multidisciplinary teams toward common objectives.

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Organize and oversee daily work activities and schedules at the construction site.
• Supervise and guide workers, ensuring efficient task execution and adherence to safety measures.
• Track project progress, report updates to management, and address on-site issues.
• Assist with on-site rectification works and coordinate with relevant stakeholders.
• Ferry workers to and from the job site as needed.

• ITE certificate in Electrical, Mechanical, or related Engineering fields.
• At least 2 years of relevant experience in the construction industry.
• Proven ability to supervise and manage a team of workers.
• Strong planning, scheduling, and hands-on problem-solving skills.
• Valid Singapore Class 3 driving license.
• Effective communication and coordination skills.

We are looking for a skilled and experienced Electron Manufacturing and Repairing Supervisor to join our t you will oversee the manufacturing and repairing pro electronic equipment, ensuring high standards of quality and safety

• Provide quality Management and Administrative support
• Oversee an efficient and effective day to day operations of the branch or outlet
• Coach and develop colleagues to ensure standards are being maintained
• Assist in the development strategy plans
• Assist Managers complete daily tasks (implementing new policies)
• Understand each department's daily processes and goals
• Participate in company's strategic planning
• Assist Manager in evaluating performance (writing reports and data)
• Monitor and manage customer complaints, ensure satisfaction and administer efficient follow up for same to receive feedback
• Implement and Improve customers retention measures
• Attract customers by answering product and service questions
• Ensuring a clean and safe working environment
• Bachelor’s Degree in any field
• Strong verbal and written communication skills
• Customer-Oriented or Passionate about serving customers
• Knowledge or experience in management or relevant similar field is a plus

Quantity Surveyor

Location: Telok Ayer MRT

Working Days: 5 days, Monday-Friday

Working hours : 9 to 6 p.m

Salary : $4,000-$5,000

Key Responsibilities:

• Responsible for quantity take off and cost estimation.
• Preparation of tender submission with specific deadline.
• Source, planning, negotiate and award of contract to vendors.
• Responsible for material order processing and cost control.
• Evaluate and process vendor claims.
• Prepare monthly progress claims for submission to consultants in timely manner.
• Finalize project accounts with clients and vendors.

Requirements:

• Min. Diploma in related field of studies.
• At least 5 years of Quantity Surveying experiences, preferably in Interior Design.
• Hands-on with Interior Design works will be high priority.

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

1. MAIN DUTIES AND RESPONBILITIES

a. Helping to build good customer relations and arranging staff meetings

b. Training and development and handling complaints and queries (from customers and staff)

c. Arranging promotional events and carrying out client satisfaction surveys and reviews.

d. Reviews the arrival list daily and assists in preparing and distributing welcome amenities.

e. Always be present in the entrance and should maintain proper decorum at all times.

f. Promotes all the new and existing beverage and event in the outlet.

2. REQUIREMENTS

a. Ability to work during all business hours (including holidays, events & weekends)

b. Ablity to handle multipal tasks.

c. Will initiate activities that promote the cleanliness and appearance of the premise