Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

The Artlette Team is a creative, dynamic and fun loving family. Our teachers have the common goal to teach, love and inspire our students. We believe that everyone can benefit from Art learning and always pride to give the best for our students.

Main responsibilities for Full time position:

- Create and conduct lessons for all curriculum and workshops according to Artlette standards

- Feedback to parents and preparation of student reports

- Attend to Student / Parent queries and recommend suitable program

- Replying to email / phone queries

- Cashiering duties for payment

- Scheduling of classes

- Administrative duties

You should have / be:

- A passion for art teaching, positive mindset, encouraging and love for children.

- A multi-tasker with the ability to work in a fast paced environment and good class managementskills.

- A self-initiative person, independent and does not mind going the extra mile.

- A good interpersonal skills, honest and responsible.

- A team player who support and respect other team members.

- An organized person with good documentation skills.

- A creative person who challenge the norms and constantly seek for improvement.

- Graduated from an Art institution – O levels/Diplomas/University OR Preschool teaching / Ar tteaching experience with minimum 1 year working experience.

- 5 days working week. Able to work on weekends with 2 weekdays off.

Carpentry supervisor

Working Day: 6 days
Working Hours: Monday - Saturday 8am - 5pm
Location: Woodland
Salary: $2800- $3500 ( Depend of experience)

Job Description:

• Supervise carpentry staff and provide direction
• Monitor and inspect work to ensure quality
• Perform maintenance, repairs, or installation of carpentry projects
• Take measurements and calculate the size and amount of material needed
• Cut, shape and other material according to measurements

Requirement:

• At least 3 years relevant working experience
• Understand detail drawing of carpentry
• Experienced and ability in this field of work such as to fabricate complicated carpenters and installations
• Able to arrange site works for workers

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

Sea Forrest Engineering Pte Ltd (a subsidiary of BH Global Corporation Ltd) seeking a skilled and experienced Electrical Design and Commissioning Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing and commissioning complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Responsibilities

1) Electrical Design

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) Commissioning and Integration

• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.

3) System Optimization and Performance Enhancement

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

4) Documentation and Reporting

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.

5) Regulatory Compliance and Safety

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Requirements

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design and commissioning, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel to shipyards and vessels for commissioning activities.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

• Reporting to the General Manager and responsible for technical specification and definition of industrial systems, products and solutions including system and product design, technical sourcing of such systems / products and digitization applications

• To attend technical review with sales team and technical meetings with clients

• To attend coordination meetings with architects, M&E and structural consultants

• To lead a small team of designers; monitor project design submission schedule, check designs and shop drawings, training designers, etc.

• To attend technical meetings with main contractors. Coordinate pipe clashes with M&E and structural services

• Detailed job responsibilities will be provided upon application

Requirements:

• Bachelor/Master’s Degree in mechanical engineering, automation or relevant fields

• At least 8 years product and application experience in Construction/Engineering industry

• Good business negotiation and presentation skills

• Excellent communication skills with multinational customers and colleagues.

• Good leadership to lead technical team for business growth. Exhibit flexibility and agility

• Able to work independently with professional judgments, proactivity and team player spirit.

• Willing to take up challenging assignments

• Revit & AutoCAD proficient

• Candidates available immediately or short notice preferred

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality,

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

• Build blazing fast page speeds
• Build reusable components/primitives
• Delightful user interactions and affordances
• Work with the team to review PR, and make the codebase robust.

Job Requirements

• 5 years experience at tech startups with millions of DAUs
• Solid knowledge of TypeScript, and experience with Next.js, etc.
• Basic backend skills with Node.js, building REST APIs, working with databases
• Knowledge in Bitcoin and mining concepts
• Strong written and verbal communication skills

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

Job Responsibilities:

• Lead Analog Circuit Design and Optimization:
  Direct the design and optimization of complex analog circuits, leveraging advanced schematic capture and simulation tools to achieve superior performance and reliability across diverse operating conditions.
• Drive Digital Standard Cell Library Development:
  Oversee the creation of high-performance, low-power digital standard cell libraries, ensuring alignment with stringent performance, power, and area specifications.
• Innovate Cutting-Edge Cell Architectures:
  Develop and implement advanced digital standard cell architectures, introducing innovative solutions to enhance design efficiency and meet evolving technological demands.
• Guide Layout Implementation:
  Provide strategic oversight to layout teams, ensuring accurate, efficient, and manufacturable physical implementations that adhere to performance and reliability goals.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s/Ph.D.) strongly preferred.
• Experience:
  10+ years in analog design and digital standard cell development, with expertise in deep sub-micron process technologies (12nm and below) and proven tape-out leadership.
• Advanced Technical Skills:Deep expertise in analog design, power optimization, and noise analysis.
  Mastery of tools such as Cadence Virtuoso, Spectre, and HSPICE for design and simulation.
  Extensive experience in digital standard cell library creation, optimizing for power, performance, and area.
  In-depth knowledge of deep sub-micron challenges, including layout optimization and power delivery strategies.
• Leadership and Communication:
  Demonstrated ability to lead cross-functional teams, mentor junior engineers, and foster innovation. Exceptional communication skills to articulate complex concepts and align multidisciplinary teams toward common objectives.

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

• Requires a BS in Electrical or Computer Engineering
• Some years of relevant experience is preferable
• Fresh graduates are encouraged to apply

Design Coordinator cum Drafter

Responsibilities

· Assist designers with project coordination, research and data collection

· Managing design files, documents, and archives

· Creating and editing design materials such as presentations, reports, and graphics

· Conducting research and gathering inspiration for design projects

· Assisting with design concept development and brainstorming

· Ensuring design consistency and quality across projects

· Responsible for general drafting work including the detailing of structural, architectural and other related drawings

· Ensure drawing and proposal drawings are in accordance with specifications

· Prepare all coordination drawings, detail, 2D & 3D shop drawings and as-built drawings etc

· Coordinate and assist Project teams in all on-site technical/engineering matters

Requirements

· Recognized Degree in Architecture or equivalent

· Well versed in BIM

· Good knowledge of AutoCad 2D/3D

· Good communication (both oral/written) as well as presentation skills

. Minimum 2 years’ work experience in construction & design trade in Singapore

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Quantity Surveyor

Location: Telok Ayer MRT

Working Days: 5 days, Monday-Friday

Working hours : 9 to 6 p.m

Salary : $4,000-$5,000

Key Responsibilities:

• Responsible for quantity take off and cost estimation.
• Preparation of tender submission with specific deadline.
• Source, planning, negotiate and award of contract to vendors.
• Responsible for material order processing and cost control.
• Evaluate and process vendor claims.
• Prepare monthly progress claims for submission to consultants in timely manner.
• Finalize project accounts with clients and vendors.

Requirements:

• Min. Diploma in related field of studies.
• At least 5 years of Quantity Surveying experiences, preferably in Interior Design.
• Hands-on with Interior Design works will be high priority.

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Job Summary

We are looking for enthusiastic Media Design & Production Interns who are looking to broaden their knowledge and skills in developing creative visuals and interactive media for executing branding strategies and marketing campaigns.

You will be involved in Bizsquare's and our clients' design and branding projects, as well as content marketing initiatives to drive traffic, engagement and leads, with the ultimate goal of increasing brand awareness and lead generation.

Responsibilities and Duties

• Design work for brand visuals and social media content

• Media production work like photography/videography and editing for branding & marketing collaterals

• Develop content marketing and brand strategies to reach out to the targeted audience using all marketing channels like website and social media etc.

• Create new ideas for campaigns to support brand awareness and lead generation efforts

Requirements

• Proficient in Adobe Photoshop/Illustrator and Adobe Premier Pro

• Able to adhere to milestones and deliverables, strong time management skills

• Creative mindset and has a flair in design

• Self-motivated and independent

Physical Design Engineer (Digital IC)

Job Description：
1. Works with the senior physical design team to complete the chip floorplan , clock architecture, and powerplan .
2. Involved in one or more physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.
3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:
1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science
2. 0 - 5 years of work experience in the digital backend design field. (Fresh graduates can be considered).
3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.
4. Willing to work in a new start up entity in Singapore

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

Requires a BS in Electrical or Computer Engineering and > 5 years of related experience

• Position : Procurement Executive (Interior Fit-out/ Interior Design Industry) –Up to $3500
• Location : Toa Payoh Industrial (Bus stop nearby)
• Working hours : 5 days a week - Monday to Friday from 9am to 6pm
• Salary (commensurate with experience) : Basic up to $3500 + Performance Bonus + 14 Days Annual leave
• Duration : Permanent
• Industry : Interior Fit-out Industry

Main Responsibilities:

• Implement procurement strategies, policies, and procedures.
• Identify and manage vendors, including contract development and compliance, and vendor performance
• Negotiate with suppliers on lead-time, cost and quality to obtain the maximum benefit for the company.
• Issue of Purchase Order, updating of Purchase Orders status and Project Cost updating.
• Exercises a good working knowledge of materials and sources of supply and makes purchases at prices consistent with quality and quantity requirements
• Other Ad hoc assignment by Superior.

Requirements:

• Knowledge of import and export regulations.
• Experience in vendor management and contract negotiation.
• Ability to work in a fast-paced environment and manage multiple projects simultaneously.
• Self-motivated and able to work independently with minimum supervision

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Senior Advertising & Promotion Executive

5 days work week
10am - 6pm
Bukit Merah
$3200 - $3800

Responsibilities

• Market Research: Conduct market research to gather information on target demographics, consumer behaviour, industry trends, and competitor analysis.
• Content Creation: Assist in creating marketing materials such as social media posts, blog articles, promotional emails, or advertising copy.
• Advertising Campaigns: Support the planning, execution, and analysis of advertising campaigns, which may include online ads, print ads, and more.
• Email Marketing: Help with email marketing campaigns, including list management, content creation, and performance tracking.
• Graphic Design: Create or assist in the creation of marketing materials, graphics, and visuals for various advertising and promotional materials.
• Market Planning: Contribute to the development of marketing and advertising plans, including setting goals and objectives, budgeting, and timeline management.
• Branding: Assist in maintaining and enhancing the company's brand image and identity through consistent messaging and design.
• Learning and Development: Continuously learn about the latest marketing trends and tools, and apply that knowledge to improve marketing strategies.

Requirement:

• Good photography or videography skills.
• Experience in photo or video editing.
• Must be able to use adobe creative cloud
• Must know how to use Xiao Hong Shu, Tiktok, Ads Manager, Shopify, Instagram/Facebook and lastly Wechat
• Bachelor in any related field.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

>> Wave Entertainment Pte Ltd

>> Job title: Public Relations Officer

>> Location: 1 Selegie Road Singapore 188306

>> Working hours: 6pm to 3am

>> Salary: $6000 - $8000

>> Preference: Full-time job

HIGHLIGHTS:

• Attractive BONUS + Extra Incentives
• One-on-one coaching system
• Career Progression
• Frequent Bonding Events
• Personal Development Training

RESPONSIBILITIES:

• Hiring, training, and managing staff, such as bartenders and waiters
• Managing inventory
• Opening and closing the club
• Ordering supplies
• Promoting club/hiring or encouraging others to promote club
• Ensuring operations run according to safety and sanitation standards and laws
• Implement strategies for improved work performance
• Nightclub managers may also be in charge of developing revenue opportunities for the club, such as recruiting talent or running promotions. Nightclub managers often work evenings, weekends, and holidays. The environment is usually loud and fast-paced.

REQUIREMENTS:

• Team Player
• Good Learning Attitude
• Citizen or PR preferred

Wave Entertainment Welcome you to join our team!

mm2 Entertainment is Singapore’s leading media entertainment and content company with regional offices in across Asia and the United States. The mm2 group of companies champions “Content and Media for Asia” with integrated businesses across the content, entertainment cinema, event and concert industries across the globe. In 2017, mm2 Asia Ltd became the first local film production company to be listed on the SGX-ST Mainboard. The group’s core business is the production of Content for a multitude of platforms: movies, TV and streaming services, commercial short films and digital formats.

We’re currently searching for Media Marketing Executive (Marketing & Distribution) for our Film Marketing and Distribution team. The main objective of the role is to create marketing campaigns to promote films and create buzz. This position is offered under IMDA Company Led Training Programme.

You will be responsible for developing marketing strategies and overseeing marketing campaigns for movie releases in Singapore. You will organize creative campaigns and promotional events for online and offline executions for advertising and social media.

Our ideal candidate will be a detailed planner, skilled at graphics and video editing software, an expert communicator, with great intuition and a passion for movies, especially Chinese-language films.

Job Scope/ Responsibilities

• Responsible/Involved in formulating and creating traditional, digital and social marketing campaigns.
• Craft creative marketing materials – including copywriting, graphic editing and video editing.
• Manage publicity and press relations.
• Track and report box office revenue.
• Liaise with media and promotional partners.
• Manage social media.
• Ensure the smooth running and accurate documentation of department administrative functions.

Requirements

• Excellent verbal and written communication skills in English and Chinese.
• Minimum Bachelors in Business and/or Marketing (Marketing Communications preferred); Diploma in Business and/or Marketing with relevant experiences will be considered.
• Marketing experience in digital marketing to reach different target audiences.
• Strong interest in films and content marketing trends.
• Familiarity with social media and web analytics.
• Strong computer literacy skills in using Microsoft Office and Social Media Marketing Tools. Video Filming and Editing, Photography and Photoshop skills are preferred.
• Strong problem-solving skills with high emotional intelligence
• Able to work independently and be a team player.
• Good organisational skills.
• Attention to detail in composing, typing, establishing priorities and meeting deadlines.
• Ability to handle multiple projects simultaneously.
• Application is strictly open to Singaporeans and Singapore PRs only.

mm2 Entertainment is Singapore’s leading media entertainment and content company with regional offices in across Asia and the United States. The mm2 group of companies champions “Content and Media for Asia” with integrated businesses across the content, entertainment cinema, event and concert industries across the globe.

In 2017, mm2 Asia Ltd became the first local film production company to be listed on the SGX-ST Mainboard. The group’s core business is the production of Content for a multitude of platforms: movies, TV and streaming services, commercial short films and digital formats.

We are looking for an experienced and enthusiastic Associate Producer, Film & Content Development to join our creative division to create film production, as well as provide production support to clients across various industries. This role will be offered under IMDA CLT Programme.

The responsibilities of a producer encompass multiple responsibilities depending on the project involved. Each project brings new challenges and problems to solve.

If you have a passion for storytelling and videos, relish the challenges of managing people, tasks and budgets, this is a vibrant place to be. High energy and commitment are essential, as well as the ability to work in a high pressure environment.

Responsibilities

• Working with the management in film productions for theatrical release.
• Prepare decks to pitch to networks, clients, sponsors and other partners.
• Manage projects from development stage till delivery.
• Manage logistics of production to ensure smooth operation.
• Work closely with directors to provide creative coordination.
• Prepare production budget and schedule for assigned projects.
• Monitor and control production expenditure within approved budget.
• Provide production support for international projects.

Requirements

• A strong interest in storytelling and filmmaking.
• Min. 3 years of production experiences in production environment, with hands on experiences of various processing of filmmaking, including creative producing and production management.
• Education in fields related to media studies, communication, business studies or other humanities preferred.
• Proficiency in Microsoft Office applications (Excel, Word and PowerPoint).
• Excellent written and verbal communication skills.
• Have experience in organizational and administrative skills.
• Ability to work well under pressure.
• This post is only to Singapore Citizens/Permanent Residents only.