Job Description:

1. Analysis and design of civil structures covering both structura and geotechnical (Bridge Design, Drain Design, Slope Stability analysis, Settlement Calculation, Temporary Steel Structure Design etc.),
2. Ensure all engineering works comply with all relevant statutory standards, regulations and codes of practice.
3. Assist team leader to achieve set targets without compromising quality standards of design and supervision works.

Job Requirements:

1. Bachelor of Engineering in civil and structural / geotechnical engineering with minimum 5 years of relevant experience.
2. Well-versed in civil and structual design software e.g. StaadPro / GeoStudio/ Plaxis /HECRAS.
3. Familiar with BIM will be an advantage.
4. Willing to work in Changi District, company's shuttle bus will pick-up and drop-off at Pasir Ris MRT station.
5. Willing to work 5.5 workweek.

Job responsibilities:

• To prepare, check, verify and process invoices, delivery orders and payments
• To update bank record and monitor movement of cheques for signatures
• Issue cheque payment
• Filing for Accounts documents
• Data entry of invoices into Accounting system
• Perform any other ad-hoc accounting and administrative duties as required
• Any ad-hoc duties or assignment as instructed by your superior

Requirements:

• ITE in Accounting or relevant discipline preferred
• Preferably with some hands-on experience with NAVISION and accounting software
• Preferably at least 2 years of Accounting working experience in construction industry
• Meticulous with strong analytical skills

Co-ordinate with Main Contractor / Consultants / Subcontractors on site

Conducts project site inspection on a regular basis

Report Progress claims and monitoring project activities

Monitoring daily process and progress at Project sites

Project planning, execute resource management and control

Attend site meeting

Job Description:

• Plan and control the delivery of project design to ensure the achievement of quality, completion and project objectives.
• Select and engage, then monitor the performance of external design partners within the discipline including their deliverables, cost and timeframes.
• Manage the design approval process in accordance with project requirements and program
• Prepare budgets and schedules of design delivery for management approval then manage and report the cost of design delivery in the project life cycle.
• Manage design to ensure the cost of the works meets project requirements.
• Manage and review milestone deliverables from the Design Consultants to ensure the compliance and adherence to project schedule, scope and Design Brief, Stakeholders’ requirements and comments, statutory codes and regulations, and company guidelines.
• Obtain, review and consolidate Stakeholders’ feedbacks on stage deliverables, and relay such feedbacks as directives to Consultants.
• Manage client and stakeholder expectations and communicate effectively with the project team.
• Supervise the work of subordinate design and drafting staff to ensure project requirements are met.
• Select and develop design management staff within the project by providing leadership and mentoring to ensure their design management competencies.
• Understand design compliance and reporting procedures and processes and leadership in the communication of requirements.
• Foster the interaction between design and construction teams to maximise innovation and project success.

Job Requirement:

• Recognised Degree in Civil Engineering
• Minimum 15 years of engineering experience in the construction industry with 8 years of experience in the design of civil and structures of building related projects
• Experience in LTA and SMRT project will be advantage.
• Good interpersonal, communication, and organisational skills
• Resourceful, self-driven, proactive, and able to foster collaboration
• Able to work well independently and as a team

Job Description

*Data entry

*Keep records of payments & receipts from customers

*filing and documentation of supplier invoices, Sales projects & payments

*Scanning documents

*Perform other ad-hoc administration duties

*General administrative duties such as filing,

*well-versed in Microsoft office (MS, Excel,Word, Outlook)

*willing to work in North area

*flexible working options

Email your resume to: echsmd@[email protected]

Main Responsibilities

Join our dynamic team at Makino Asia, where you'll be at the forefront of cutting-edge technology, driving innovation and excellence in the realm of CNC Milling Machines and Automation.

As a valued member of our Research & Development department, your responsibilities will include:

1. Developing New Products and introducing Innovative Designs for our existing Series Products.
2. Crafting Customized Machines to meet the unique needs of our diverse customers.
3. Nurturing collaboration across various company departments, including Sales, Marketing, Product Management, Production, Supply Chain, Customer Support, etc.
4. Mastering the art of designing rigid, high-accuracy structural parts, as well as lightweight components for rapid, high-acceleration applications, working hand-in-hand with our Simulation and Test Engineers.
5. Pioneering the development of mechatronic units, integrating pneumatic, hydraulic, servo-electric, and sensor components to create seamless machine systems.
6. Engaging in Concept Design, Structural Simulation, Detailing, Prototyping, Testing, Production, Customer Support, and Monitoring machine performance at our clients' sites.
7. Leveraging our dedicated R&D Lab for innovative prototyping.
8. Enjoying mentorship from seasoned senior engineers, guiding you on your career path to success.
9. Embracing a global perspective by collaborating with an extensive network of Makino R&Ds, Sales Regions, and Key Suppliers.
10. Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

To excel in this role and contribute significantly to our Research & Development team, we seek candidates with the following qualifications:

1. Degree or Master’s Degree in mechanical engineering from a reputable university, demonstrating a solid academic foundation.
2. Proven track record of at least 3 years in mechanical design, preferably in a production environment, showcasing your expertise in developing cutting-edge solutions.
3. A genuine passion for product design, understanding its pivotal role in driving innovation and bringing forth revolutionary products.
4. Unleash your creativity to envision novel and inventive solutions that push the boundaries of what's possible.
5. Exceptional analytical skills to tackle complex challenges, delivering reliable and efficient problem-solving.
6. Proficiency in industry-standard design tools and software, allowing you to materialize your ideas with precision and finesse.
7. Strong teamwork and communication abilities, enabling effective collaboration across multiple departments.
8. An enthusiastic learner, always seeking opportunities to stay abreast of the latest trends and advancements in the field of mechanical engineering.

If you are passionate about cutting-edge technology, enjoy creative problem-solving, and thrive in a collaborative environment, this is the ideal opportunity for you to make your mark in the world of advanced manufacturing and automation. We eagerly await your application to join our progressive and innovative team at Makino Asia.

Come be a part of our extraordinary journey at Makino Asia and together, let's shape the future of manufacturing technology!

Job Description:

• Research & Development for machine tool products and technologies (CNC Milling Machines and it’s Automation) with strong guidance by experienced senior-engineers along the career-path
• New Software-Development as well as Software Design for our existing Series Products
• Software Development of Customized Machines for our customers
• Prototyping in dedicated R&D-Lab
• Collaboration with extensive global network of Makino R&Ds, Sales-Regions and Key-Suppliers
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Key Responsibilities:

• Understand customer requirement and decide on the specification
• Prepare specification and testing method documents
• Prepare software (PLC - Ladder, C/C++, VB etc..)
• Test software on simulator / actual machine
• Prepare operator / maintenance manuals
• Release software and related document for distribution / record purposes
• Develop new functions to improve productivity and give good features to have added advantage over the competitor products
• Involve in the design of HMI / Servo turning / PLC programming / Parameterization / Commissioning

Job Requirements:

• Possess a Diploma/ Degree in Electrical/ Electronics/ Mechatronics or equivalent
• Have at least 3 years of experience working in Machine Tool Software Design
• Working experience on SiEMENS SINUMERIK CNC controller with HMI / Servo turning / PLC programming / Parameterization / Commissioning is a must.
• Strong interest in product for the production-environment as key-enabler for many innovative products.
• Creativity for innovative solutions as well as strong analytical skills for problem-solving and can do hands-on works (testing)
• Able to take responsibility and ownership.
• Willing to travel to customer site for technical discussion / project implementation when required.
• Good and effective communication skills.

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications.
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Electrical or Electro-mechanical engineering, preferably with a focus on motion systems
• At least 7 years of relevant working experience (semicon or similar)
• Knowledge of electric design principles of cabling, connectors, safety systems, electronic racks, PCB design
• User of 3D design tools and schematic drawing tools (e.g. NX, SolidWorks, E-Plan)
• Basic programming skills and ability to debug electrical systems
• Understanding of motion control systems
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing interdependency between electrical, electromechanical and mechanical (sub)systems
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

• Analyse, design, develop, maintain products and assist in their commercialization.
• Design prototypes and systems for testing.
• Create test plans and reports
• Implement corrective actions on deviations
• Conduct or participate in technical reviews of requirements, specifications, designs, code and other artifacts. Contribute to design standards and support design re-use.
• Create and maintain product documentation. Provide support to customers.
• Perform mechanical calculation and analysis
• Perform risk assessments
• Author technical reports, papers, articles, patents and presentations.
• Maintain familiarity with company technology, organization and business.
• Basic knowledge of materials (metals, elastomers) would be a plus
• Basic knowledge of simulations would be a plus
• Bachelor in Mechanical Engineering
• Strong technical knowledge in mechanical engineering
• Good in performing calculation related to stress/strain/pressure/torque.
• Ability to work under pressure and tight deadlines in a dynamic environment

Veronica Neo Shen Hwa - [email protected]

Personnel Reg No: R1110855

Manpower Staffing Services (S) Pte Ltd

EA Licence No: 02C3423

Job Description

Job Description

• Preparation and drafting of Alum and Steel works/ Technical drawings for projects, tender submissions, etc.

• Space planning, conceptual design development and detailing

• Produce detail drawings and specifications for construction independently

• Liaise and coordinate with contractors, suppliers and vendors

• Ensure designs/drawings meet relevant code and compliance requirements, and good engineering practices.

• Able to do Qty take off and Cutting list

Requirements

• Diploma in Mechanical or Electrical Engineering or equivalent

• Minimum 1-3 years of work experience in drafting of Alum and Steel works/Technical drawings in architectural, construction related industries.

• Must have at least 3 years experience / knowledge of REVIT

• Competent in AutoCAD & good knowledge in SolidWorks (3D)

Only shortlisted candidate will be notified

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications.
• System Design Phase: generation of system design concepts and reviews
• Develop well-considered choices, validated against system requirements
• Definition of high level modules and related technical interfaces
• Monitor that projects stay within agreed specifications
• Make use of your creativity and helicopter view to find solutions in case of conflicts.
• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Electrical or Electro-mechanical engineering, preferably with a focus on motion systems
• Knowledge of electric design principles of cabling, connectors, safety systems, electronic racks, PCB design
• User of 3D design tools and schematic drawing tools (e.g. NX, SolidWorks, E-Plan)
• Basic programming skills and ability to debug electrical systems
• Understanding of motion control systems
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Job scope:

- surface preparation work (e.g. removing old grout and cement and cleaning and levelling surfaces)

- laying tiles in accordance with tiling plan, cutting tiles where necessary

- grouting gaps between tiles

- any other duties as may be required

Requirements

- 2 yrs relevant experience

- willingness to travel to jobsites islandwide

- able to lift heavy materials & equipment

AAssociate’s or Bachelor’s degree / Diploma in Mechanical Engineering or related engineering discipline required.

• Minimum of 3 years of experience in Factory Automation field.
• Experience with Solidwork 3D preferred
• Hands-on experience with design, assembly and/or fabrication of mechanical parts preferred.
• Strong verbal and written communication skills are necessary. Writing must be clear and unambiguous.
• Ability to manage multiple tasks and work independently.
• Strong problem-solving skills and creative approach for generating new ideas.
• An excellent grasp of engineering and design principles.

Duties & Responsibilities:

• Carry out structural design and produce professional engineering calculation complying to Eurocodes and prevailing building control regulations
• Attending technical meetings with authorities, developer and contractors
• Prepare technical engineering report and draft for shop draawing
• Check shop drawing complying to design intent
• Assists Senior Engineers in day to day activity on the projects
• Other duties related to steel structure site erection

Requirements:

• Knowledge of Structural design software TSD, Prokon, and etc
• Good internal and external networking
• Bachelor Degree in Engineering (Civil and Structure)
• At least 3 years' local experience, ideally in structural steel design
• Able to do independent structural steel work design
• 5 years experience

Responsibilities:-

1. Prepare material requisition lists for job requirements.

2. Plan and design electrical switchboards, consoles and control panels according to customer's requirements and Terasaki standards.

3. Prepare approval drawings, shop drawings, final drawings / documents, short circuit calculations, instruction manuals as required for submission to clients and shop floor production.

4. Co-ordinate with clients and consultants on the technical requirements. Attend technical discussions with clients and consultants when required.

5. Feed back to Sales & Marketing Department on the changes of technical requirements by clients for claims of additional costs and time.

6. Check and follow-up on design and shop drawings with production departments.

7. Develop and improve on design of electrical switchboards, consoles and control panels. While taking note of quality, standard, cost effective designs are to be considered.

8. Assist and advise Sales & Marketing Department on technical matters, provide technical backup for securing of contracts.

9. Carry out other responsibilities as and when assigned by the superiors.

10. Follow the procedures of design control, documentation and data control, and quality system of the total Quality Management System.

Criteria:-

Applicant must possess experiences in marine/industrial switchboard design.

Job Description

• Design engineering structure according to technical requirements as defined by contract, class rules and specific standard within quality, time and cost given.
• Prepare and provide design calculation / BOM / general arrangement / sectional drawings.
• Produce accurate assembly / detail drawings within an agreed time scale.
• Ensure drawing list are updated.
• Ensure production drawings and documents are completed and issued on time.
• Update and understand know-how on rules, class, authorities and etc.
• Prepare 3rd party approval submission documents.
• Investigate scope of re-work / modification brought forward by the Production.
• Able to use STAADPro is a must to perform design calculation.
• Perform engineering coordination / drafting (drawings) / checking as and when required.
• Any other duties as assigned.

Job Requirement

• Degree / Diploma in Engineering or equivalent.
• Minimum 5 years of relevant experience preferably in similar industry.
• Software knowledge in STAADPro is a must.
• Hands on AutoCAD and drafting knowledge.
• Organised, meticulous, team player with sense of responsibility.

1. Assist to the Engineering Manager to overview the engineering and design aspect upon confirmation of project. Based on Technical Agreement/ Specification, GA. Contract Requirement, and Scope of supply etc. via contract review to carry out design.
2. Co-ordinate with Engineering Manager, Purchasing Department and Production Department to generate drawings.
3. Preparing Drawing and submit for Approval; liaise with Customer/ Class on Technicality aspect to finalized on the design.
4. Based on Feedback/ Comments to prepare Working Plan incorporating all comments, and assist to Purchasing Department on the Material Requisition for Clarification of Approval.
5. Generate Test Protocol based on design output for the Commissioning Engineer and submit for approval. And prepare Instruction Manual and “Final Drawings” for Submission.
6. Carry out product inspection and in-charge of product quality conforming to Standard; issue Non-conformance Report for Irregularity and assist in Rectification.
7. Seek and improve performance of product/ equipment and production process.
8. Attend to site meeting and inspection to verify work carry out by production team and provide solution to solve difficult site problem.
9. Liaise with GM, Production Department for the range of standard product and detail design of all in house products.

REQUIREMENT

1. Degree in Marine Engineering of HVAC System/Equivalents.

2. At least Three (3) Years Related Experience in HVAC System.

3. Good Office Coordination Skill/Interpersonal Skill.

4. Independent and Resourceful.

5.Expert in Microsoft Office and Auto Cat Software.

Summary of the Job:

· Responsible for mechanical design tasks of given project and ensure delivery of the machine according to customer requirements.

Job Description:

· Prepare design concept according to customer requirement & compiling quotation from new/existing supplier at RFQ stage.

· Lead the qualification of new part from new supplier with Project buyer. Work with Quality Assurance to qualify the new supplier when required.

· Execute design according to customer requirements and to finish the jobs within given schedule and budget.

· Review and confirm technical specification with customer.

· Develop detail & assembly drawing according to Sys-Mac drafting standard.

· Designer to draw schematic diagrams for Assembly.

· Loading drawings and the files into in-house manufacturing share drive for their retrieval.

· Print drawings to verify the correctness before handling to Admin Assistant to route to in-house manufacturing to produce the parts.

· Prepare Bill of Material (BOM).

· Request PDA from planner and prepare Material Requirement List (MRL) of the project and release to Planner/Project Engineer.

· Liaise with respective Control Engineer for the requirements of electrical circuit and software development of the project.

· Liaise with the Project Engineer and assist on execution of assembly and buyoff of the project as and when necessary.

· Initiate Change Notice Request (NCR) for change of part design.

· Report progress and project related issues to the Sr. Design Engineer.

· Prepare of Machine Operation Manual & Maintenance (Mechanical) for the project.

· Maintain proper project documentation.

· Other duties as and when assigned.

Job Requirements:

· Degree/Diploma in Mechanical Engineering or equivalent.

· Min. 4 years relevant experience in Automation machine design.

· Ability to create and interpret mechanical drawings, carry out design calculations and component detailed drawings.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, highly resourceful and organized.

· Knowledge of SolidWorks 3D CAD software.

· Good team player.

Job description:

• Assist in streamlining social media accounts, Facebook, Instragam, Youtube, SEO
• Track, monitor & understand content performance through insights & analytics
• Work closely with Sales Designers to develop relevant communication collaterals & packages
• Copy writing & designs for all marketing collaterals

Requirements:

*At least 2 years of working experience in the related field as required for this position

*At least 2 years of managing, creating, designing Facebook Ads

*Experience in Digital Ads management - launch and manage advertising campaigns on Facebook, Instagram and

any other platforms that we can explore as we grow.

*Good written and verbal communication and presentation skills necessary to meet the needs of various audiences.

*Creative - an eye for good design and a generator of new & interesting ideas/concepts

*Monitor results and analytics, ongoing campaign and make strategy suggestions to achieve postive ROI

*Content Development (an advantage) - develop visual and written content for our social media pages,

advertisement and emails.

*Video editing skills (an advantage)

*Able to use Photoshop and Illustrator is a plus

Job Description:

· Prepare design concept according to customer requirement & compiling quotation from new/existing supplier at RFQ stage.

· Lead the qualification of new part from new supplier with Project buyer. Work with Quality Assurance to qualify the new supplier when required.

· Execute design according to customer requirements and to finish the jobs within given schedule and budget.

· Review and confirm technical specification with customer.

· Develop detail & assembly drawing according to Sys-Mac drafting standard.

· Designer to draw schematic diagrams for Assembly.

· Loading drawings and the files into in-house manufacturing share drive for their retrieval.

· Print drawings to verify the correctness before handling to Admin Assistant to route to in-house manufacturing to produce the parts.

· Prepare Bill of Material (BOM).

· Request PDA from planner and prepare Material Requirement List (MRL) of the project and release to Planner/Project Engineer.

· Liaise with respective Control Engineer for the requirements of electrical circuit and software development of the project.

· Liaise with the Project Engineer and assist on execution of assembly and buyoff of the project as and when necessary.

· Initiate Change Notice Request (NCR) for change of part design.

· Report progress and project related issues to the Sr. Design Engineer.

· Prepare of Machine Operation Manual & Maintenance (Mechanical) for the project.

· Maintain proper project documentation.

· Other duties as and when assigned.

Job Requirements:

· Degree/Diploma in Mechanical Engineering or equivalent.

· Min. 4 years relevant experience in Automation machine design.

· Ability to create and interpret mechanical drawings, carry out design calculations and component detailed drawings.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, highly resourceful and organized.

· Knowledge of SolidWorks 3D CAD software.

· Good team player.

Responsibilities

• To work as supporting Mechanical Design Engineer to Project Lead Mechanical Design Engineer
• Prepare Purchase Requisitions / Specifications / Mechanical Data Sheet / Technical Bid Evaluation for Centrifugal Pumps, PD Pumps, Air Compressors.
• Prepare Purchase Requisitions / Specifications / Mechanical Data Sheet / Technical Bid Evaluation for Steam Boiler, Hot Oil Heaters, Heat Exchangers, Refrigeration Units, Oil / water separator, Cooling Tower, Vapor Recovery Unit, Marine Loading Arm, Gangway, Jib Crane, Flare, Truck Loading Arm
• Prepare Purchase Requisitions / Specifications / Mechanical Data Sheet / Technical Bid Evaluation for Pressure Vessels, Fire Fighting Equipment
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Software Requirements

• Good proficiency in MS Excel, MS word, MS Power Point

Code Knowledge

• API 610, API 676, API 682
• ASME Section VIII
• NFPA 20, NFPA 10, NFPA 16
• OCIMF

Job Description

- Meet prospective clients and handles their interior design requirements.

- Provide professional advice to clients on design concept, material selection and renovation solutions.

- Prepare quotation based on proposed design and client's requirements.

- Assists in project management includes documentations.

- Any ad-hoc duties as assigned.

Job Requirements -

- Have passion & creative in interior design with or without relevant experience.

- Training will be provided

- Proactive, resourceful and good working attitude.

- Independent with good interpersonal and communication skills.

- Required language : English & Chinese

- Singaporean/ PR and Work Pass may apply

Interested candidates, please send in your resume, including current & expected salary to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Job Description & Requirements

- Meet prospective clients provided by company and handles their interior design requirements.

- Provide professional advice to clients on design concept, material selection and renovation solutions.

- Prepare quotation based on proposed design and client's requirements.

- Assists in project management includes documentations.

Job Requirements

- Have passion & creativity in interior design

- Proactive, resourceful and good working attitude.

- Independent with good interpersonal and communication skills.

- Strong co-ordination and excellent follow through skills.

- Preferably possess knowledge in fitting out works and have a keen eye in details.

- Required language : English & Chinese

Interested candidates, please send in your resume, including current & expected salary to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Handle full set of account

Maintain proper accounting records, invoices, payroll, payments

Budget and costing estimation

Manage General Ledger, Financial Statement, Balance Sheet, Bank Reconciliation

Project costing calculation
Prepare for monthly and annual report

GST submission and filing

other ad-hoc task

Job Requirement:

Minimum Diploma in Business Administration / Accounting
Minimum 2 years of relevant experience, with AR/AP & Payroll experience

Interior Sales Designer

Job Description

- Meet prospective clients and handles their interior design requirements.

- Provide professional advice to clients on design concept, material selection and renovation solutions.

- Prepare quotation based on proposed design and client's requirements.

- Assists in project management includes documentations.

- Any ad-hoc duties as assigned.

Job Requirements -

- Have passion & creative in interior design with or without relevant experience.

- Training will be provided

- Proactive, resourceful and good working attitude.

- Independent with good interpersonal and communication skills.

- Required language : English & Chinese

- Singaporean/ PR and Work Pass may apply

Interested candidates, please send in your resume, including current & expected salary to [email protected]

We regret to inform that only shortlisted candidates will be notified.