Job Descriptions

• Execute design activities with customer design proposals, specifications, manuals, and other data.
• Evaluate the feasibility, cost, and maintenance requirements of designs or applications.
• Prepare and update 3D drawing and control in every issuance of drawings, in accordance with the detailing procedures and standards using AutoCAD application/ BIM Softwares.
• Study drawings and other pertinent papers for preparation for fabrication and erection drawings.
• Checking of elevation, dimension, and reinforcement of all structures as indicated in plans.
• Prepares final as-built drawings as per requirement of the client.
• Liaise with Client, Client's Consultants, Contractor, and the Design Checker to obtain approval of design and drawings.

Job Requirements

• Degree in Mechanical Engineering
• Min 5 yrs experience in Mechanical Design
• BIM,AutoCAD/Inventor/Solidwork experience, preferably in designing wiches & lifting equipment
• Good communication skill, salf motivated, and positive attitude.
• Independent and hardworking.

Job Title: Interior Design Drafter

Reports To: Senior Designer / Design Manager

Job Overview:

The Interior Design Drafter is responsible for creating accurate technical drawings and plans based on the specifications provided by interior designers and project managers. This role involves translating design concepts into precise CAD drawings, ensuring all plans comply with local building codes and project requirements.

Key Responsibilities:

1. Drafting and Design

• Prepare detailed technical drawings, floor plans, elevations, sections, and 3D models as needed.

• Collaborate with designers to convert concepts into functional layouts.

• Develop joinery and furniture design details with accurate specifications.

2. Coordination

• Coordinate with project teams, architects, contractors, and suppliers to ensure accuracy and feasibility of designs.

• Revise drawings based on feedback and changes to project requirements.

3. Compliance and Standards

• Ensure drawings meet building codes, safety regulations, and company standards.

• Maintain a high standard of accuracy in all technical drawings.

4. Documentation

• Organize and maintain drawing archives for easy retrieval and reference.

• Assist in preparing design presentations with accurate visual documentation.

5. Project Support

• Assist in material selection and creating mood boards if required.

• Visit project sites for measurements, design clarifications, and progress updates.

Qualifications and Skills:

• Diploma or degree in Interior Design, Architecture, or related field.

• Proficiency in drafting software such as AutoCAD, SketchUp, Revit, and other relevant tools.

• Strong understanding of interior design principles and space planning.

• Ability to interpret design concepts and translate them into technical drawings.

• Attention to detail with excellent organizational skills.

• Knowledge of building codes, safety standards, and materials.

• Good communication and teamwork abilities.

Preferred Experience:

• 1-3 years of experience in interior design drafting or a similar role.

• Familiarity with 3D rendering software like 3ds Max , lumion, I- structure etc

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.
  

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

We are seeking an individual to support our business in printing and canvas stretching/framing. This job would be based at our factory space at 48 Toh Guan Road.

Whilst some experience would be preferable we are more than willing to onboard someone with no experience providing you have the right attitude and drive to learn.

The job loosely involves:

• Handling print jobs on a range of media - typically paper and canvas based prints on large format printers such as the Canon Pro-566.
• Operating the printer, such as loading & unloading media, creating print jobs, handling post print and distribution.
• Manufacturing canvas stretcher bars, which involves basic measurements and the usage of two pieces of simple machinery.
• Stretching canvases over these wooden stretcher bars.
• General tasks such as packaging, producing shipping labels and generally supproting in keeping the factory tidy.

Base salary would be dependent on existing experience but we are also open to agreeing a commission based portion based on the overall performance of the business each month and the individuals contribution in terms of the number of pieces produced.

Job Responsibilities:

• Identify project design hazards, construction risks, and constructability issues.
• Develop corresponding mitigation measures together with the project team.
• Chair regular risk mitigation meetings and training with clients and internal parties.
• Advise management on alternative safer and higher productivity construction methodologies.
• Review method statements and risk assessments for safety and construction compliance.
• Attend meetings related to construction progress, risks, etc.
• Any other duties as assigned by the Managements.

Job Requirements:

• Have reasonable exposure in safety and health for construction especially on transportation infrastructure projects in a similar nature
• Attended the Design for Safety (DfS) for Professional Course and passed the assessment or equivalent.
• A registered PE or Architect with a Practicing Certificate OR
• Minimum 10 years relevant experience in the design and the supervision of the construction of structures with at least 5 years in design which includes contributions to designs and writing specification
• Have a degree accepted by PE Board or Board of Architect and construction related degree accepted by Singapore Institute of Surveyors (SISV) and Society of Project Managers (SPM)
• Possess excellent leadership, planning, good management skills, interpersonal communication and negotiation skills
• Have experience in LTA projects have an advantage

1. Design and manufacturing of Mooring Winch, Towing Winch, Anchor Handling Winch, Linear Winch, Anchor Windlass, Marine Crane systems, anchor pipe system, post trenching equipment and other related marine equipment.

2. Carry out calculation work on T.C Marine and Offshore Equipment.

3. Conduct checks on the required marine classification standards for T.C Marine and Offshore Equipment.

4. Carry out the study and understanding of client’s technical specifications.

5. Carry out the project management and supervision of the Engineering process for the manufacturing and design of T.C products.

6. Ensure successful delivery of the completed products to client.

7. Resolve all technical problems arise from client during commissioning.

Job scope:

-Propose ideas on interior designs and space planning

-Produce interior design drawings, 3D drawings & quotations

-Work closely with client, contractors & suppliers to ensure quality project completion & timeline set are met

-Involve in site measurement, layout plan & selection of materials

-Other tasks as assigned by company's director

Requirements:

-Specialised in interior design or equivalent

-Able to communicate & write in both English & Mandarin in order to communicate with our mandarin speaking subcontractors & customers

-Knowledge in Autocad, sketchup, 3D max, Vray, photoshop, excel

-Responsible, committed and have a good working attitude

-Able to work independently and be a team player at the same time

-Able to start work at short notice

-Individuals with or without experience are welcome to apply, training will be provided

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

We are looking for a Design Manager to lead a team of geotechnical design engineers in the world's largest geotechnical specialist contractor.

Responsibilities

• Lead the design works in accordance with site specific HSEQ Construction Methodologies, Risk Assessments, Site Rules and Keller Policies and Procedures.
• Understand and manage clients' requirements and their obligations in the development of a building design.
• Liaise positively & actively with clients, consultants & authorities using his/her technical expertise to adopt / accept / approve the technical proposal for the projects.
• Ensure the design process adheres to current legislation, standards and codes of practice.
• Ensure the design information is of the right quality and keeps pace with project timelines.
• Strive to eliminate health and safety risks in the design and financial risks during construction.
• Preparing detailed investigation report for any incidents related to technical issue.
• Review with the Business Development team on project closing reports and develop future improvement plans / strategies to reduce risk(s).
• Be involved in society work, including writing papers to seminars.
• Design D&B solutions, including solutions for ground improvement where relevant.
• Lead, develop and provide training to the team of Engineers.
• Provide technical marketing of solutions to clients and consultants.
• Conduct regular site visits to train and create buy-in from site personnel to promote quality and good practices.

This role may require travel to overseas offices to participate in global expertise groups and overseas projects occasionally.

Requirements

• Possess a PEB-recognised Master's degree in Civil Engineering or higher.
• Proficient in soil mechanics and finite element modelling software (i.e. PLAXIS 2D and 3D).
• At least 10 years experience in geotechnical engineering, preferably in ground improvement.
• Have experience leading a team of geotechnical design engineers.
• Have experience liaising with authorities, clients and contractors.

What We Offer

• Annual Leave, Medical Insurance, Medical Leave, Variable Bonus, Learning & Development Opportunities, Referral Rewards & Employee Assistance Programme
• Global & Regional networking opportunities
• Friendly team and enjoyable working environment

We encourage applications from the right candidates regardless of age, gender identity, sexual orientation, religion, belief or race. Learn more about Keller's Inclusion Commitment at https://www.keller.com/how-we-work/diversity-equity-and-inclusion

Find out more here:

https://www.kellerasean.com/

Duties & Responsibilities

• Prepare the equipment list
• Prepare the specification and data sheet as per codes / standards, project and client’s requirement, for pump, loading arm, lifting cranes, marine gangway, air compressor, nitrogen package, hot oil package, oily water system, vapor recovery system and etc equipment for Oil & Gas industries
• Prepare the specification and data sheet for cryogenic pump, BOG compressor, condenser, LPG heater, seawater strainer, flare and etc equipment for LPG industries
• Prepare the requisition and RFQ documents for vendor enquiry
• Prepare the technical clarification and technical bid evaluation of vendor proposal
• Review and check the drawings, designs specification, materials and equipment from vendor for conformity with project technical requirements
• To liaise effectively with vendor and inter-departments to resolve engineering technical issue
• To resolve and response to client comment.
• Prepare information drawing for interface design work whenever is necessary
• Prepare bill of material for cost estimation of bid project
• Provide engineering support for the equipment installation and commissioning activities at site
• Provide engineering support for maintenance works.
• To carry out any other duties as and when assigned by the immediate supervisor or principle engineer

Qualification & Experience Generally Required

• Bachelor Degree in Mechanical Engineering or its equivalent
• Min. 1 to 2 years engineering knowledge in mechanical disciplines in Oil & Gas and Petrochemical industries.
• Experienced in equipment engineering specifications and standards
• Familiar with industrial standards and local codes
• Strong communication skills and the ability to stay organised and multi-task
• Proficient in using MS Word, Excel, Autocad

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (“Nanofilm”, “NTI”), Nanyang Technological University (“NTU”) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialisation through NTU’s innovation and NTI’s deep technology. NTI-NTU Corporate Laboratory aligns with Singapore’s RIE2025 handbook – which emphasises the nation’s commitment to research and innovation, aiming to drive economic growth and address national challenges.

The Nanyang Technological University NTI-NTU Corporate Laboratory is seeking to hire a Research Associate. The selected candidate will innovate Optical and Metasurface Design.

Key Responsibilities:

• Responsible for optical system design and development for metasurface based SLM 3D Holograph Display, Near-Eye Display, Virtual Reality and Augmented Reality etc. applications.
• Good experience on optical lens and system (e.g. Metalens) design
• Research meeting arrangement with project PIs and researchers
• Perform and analyze material/optics characterization
• Prepare monthly reports and presentations for meetings and project deliverables.

Job Requirements:

• A Master degree in the areas of Optical Engineering and/or Photonics devices and System.
• Knowledge and/or experience in using optical simulation tools such as Zemax, CodeV etc.
• Good interpersonal skills with the ability to work independently and also in a team environment.
• Entry level candidates are welcome to apply.

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Roles & Responsibilities

Construction General Foreman Responsibilities:

• Ensuring teams work together to deliver quality work to strict deadlines.
• Monitoring construction processes, and providing training and team building sessions are required.
• Ensuring adherence to health and safety regulations at all times.
• Performing equipment, material, and routine site inspections.
• Scheduling regular meetings with vendors, site inspectors, managers, and staff.
• Writing up reports, budgets, project plans, and presenting them to relevant stakeholders.
• Working closely with architects and other professionals.
• Staying up-to-date with safety codes and advancements in construction.
• Assisting with the recruitment and training of new staff.
• Processing paperwork and traveling to multiple sites as required.

Construction General Foreman Requirements:

• High school diploma or similar.
• Bachelor's degree in construction, business, management, or engineering preferable.
• Experience in the construction industry required.
• Experience in a leadership role recommended.
• Valid driver's license.
• Excellent written and verbal communication skills.
• Ability to focus and keep calm under pressure.
• Ability to keep track of multiple projects.

Email resume to [email protected]

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Duties/Areas of Responsibility

• Draft and prepare shop drawings of the given structures, components, and devices
• Possess a strong understanding of ACMV principles, including ventilation rates, duct sizing, pipe sizing, and equipment selection.
• Review design specifications, measurements, and drawings to participate in the process of solving on-site problems or design changes
• Develop accurate and detailed 3D BIM models of ACMV systems, including ductwork, piping, equipment, and components, based on the specifications and calculations (heat load, ESP, Pump friction loss, assist and coordinate with the project team to provide architectural design and technical solutions.
• Assist in the preparation of submission drawings complying with various authorities' guidelines.
• Collaborate and communicate effectively with the Project in charge to ensure timely task completion.
• Strong analytical and problem-solving skills with the ability to troubleshoot and resolve design issues
• Assist the Project in-charge in determining the project schedule
• Follow company policies and ISO procedures to ensure quality services
• Any other duties as required and assigned.

Knowledge and Skill Requirements

• Possess adequate qualifications in Mechanical & Electrical Engineering.
• Relevant experience 3 years in the construction industry.
• Proficiency in Revit MEP, Naviswork and other related BIM software, MS Office, AutoCAD, Autodesk Application, E20 software, etc.
• Strong understanding of ACMV design principles and standards
• Familiar with calculating ETTV, RETV and RTTV
• Familiar with SS553, SS554, Singapore fire code, and Green Mark version 2021

Job Description:

• Review and coordinate detailed civil/ structural/geotechnical design.
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities.
• To liaise with AC and QP(D) to ensure that all permits and applications as required by BCA are endorsed in tandem with the progress of the Works.
• Assist to check on the design calculations.
• Lead in the review of Contractor’s submissions required of the Consultant and coordinate with his respective QP(S) and the Contractors design teams to ensure prompt resolution of all design related issues arising from the reviews of the Temporary and Permanent Works.

Job Requirements:

• Degree in Civil/ Structural/ Geotechnical Engineering or its equivalent.
• Minimum 2 years relevant experience in Singapore.
• Good exposure in the analysis and design of civil works or soil-structure interactions.
• Good knowledge of the various engineering design software and analytical tools.

Job Info:

• Salary: Basic up to $4000 + AWS + VB
• Working Hours: Monday - Friday (8:30am - 5:30pm)
• Location: Woodlands North MRT

Job Scope:

• Design, test, troubleshoot, and commission company products, including jigs, fixtures, and both semi-automatic and fully automatic custom machines
• Participate in customer meetings to discuss project requirements and proposals for new initiatives
• Conduct research and develop innovative ideas to improve the company’s performance and competitiveness in industrial automation
• Assist in or manage the procurement of required materials and equipment to support the execution of these tasks

Requirements:

• Minimum ITE, Diploma, or Degree in Mechanical Engineering
• At least two years of experience in customized automation machine design
• Experience in customized semi-conductor, connector, or machine design is preferred
• Knowledge of Solidworks is preferred; familiarity with Pro-E and Inventor is an added advantage
• Strong intuition for mechanical movement, function, and performance. Good understanding of 2D and 3D objects
• Strong understanding of machining processes
• Intrinsic desire and passion for designing high-performance machines
• Able to communicate technical concepts well in English
• Able to work effectively in a relatively stressful environment

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Key Responsibilities:

1. Recruitment and Talent Acquisition:Manage the full recruitment cycle, including job postings, interviews, and onboarding.
   Collaborate with department heads to understand staffing needs and develop job descriptions.
   
2. Employee Relations:Act as the first point of contact for employee queries and grievances.
   Foster a positive workplace culture and handle conflict resolution professionally.
   
3. HR Policy and Compliance:Develop, implement, and update HR policies in line with local labor laws.
   Ensure compliance with legal requirements and industry standards.
   
4. Performance Management:Facilitate employee performance reviews and provide guidance for professional growth.
   Support managers in identifying training and development needs.
   
5. Compensation and Benefits Administration:Administer payroll, employee benefits, and incentives.
   Ensure competitive compensation structures to attract and retain top talent.
   
6. HR Data Management:Maintain accurate employee records and HR databases.
   Generate reports on HR metrics for management review.
   
7. Training and Development:Organize training programs to enhance employee skills and knowledge.
   Evaluate the effectiveness of training initiatives.
   

Requirements:

• Bachelor’s degree in Human Resource Management, Business Administration, or related field.
• Minimum 1 year of experience in an HR generalist or executive role.
• Strong knowledge of HR best practices and employment laws.
• Proficiency in HR software and tools (e.g., [specific software if applicable]).
• Excellent interpersonal, communication, and problem-solving skills.
• Ability to handle confidential information with integrity and professionalism.

We are a team tied with strong bond, dedicated to bring one’s imagination of dream home to reality. ✨

We welcome anyone, including fresh grads from Poly and Uni, with the same passion into this big family, with or without experience in related filed.

What we provide:
- Training
- 40%-60% commission
- $2800-$6000 salary

Send your CV to:

Job Responsibilities:

1. Assisting and supporting technical sales team in terms of scope of supplies and costing with respect to electrical, automation requirements during the prospecting stage for water/wastewater related systems and projects.
2. Liaising and communicating with agents/distributors/OEM partners/end-user customers on technical details and specifications of parts and components where EICA works are concerned.
3. Design and producing electrical, control panel drawings (AutoCAD or Eplan), BOM list generation and hardware component selection.
4. Developing PLC programming & HMI project (Siemens /Allen Bradley etc) for all process and functional controls of water/wastewater related systems and instrument.
5. Liaising, negotiating, and managing sub-suppliers/sub-contractors in Singapore and in the region with respect to procurements of all wiring and cabling works, fabrication and assembly of control panels for systems as well as for in-situ installation of water/wastewater related systems or projects.
6. Determining and monitoring procurement and production progress and schedules where cabling and wiring works, control panels’ PLC works and supplies are concerned.
7. On site electrical installation supervision, electrical panel testing, instrumentation configuration, loop test and automation commissioning works.
8. Compiling and handing over operation and maintenance (O&M) manuals (electrical and PLC portions etc) to our agents/distributors and end-user customers.

Requirements:

• Diploma / Degree in Electrical Engineering or Computer Science.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Minimum 5 to 8 years of working experience in Water Industry or engineering projects would be advantageous.
• Knowledge of PLC programming (Siemens /Allen Bradley etc)
• Willingness to travel locally or to regional countries occasionally for site installation, trouble-shooting or testing and commissioning duties at clients' project sites
• Able to work independently and a good team player.
• Senior position will be considered for candidates with more experience.
• Candidate who are able to start work within short notice or immediately would be advantageous.

Are you interested in joining a team that is revolutionizing the resource exploration and navigation industry? Atomionics is developing quantum sensors using cold atom interferometry, where atoms are cooled to nearly absolute zero using lasers. At such extreme temperatures, these atoms behave like waves, enabling precise measurement of forces acting on them.

This technology has vast potential applications, including advancing the zero-carbon energy transition, enhancing the performance of inertial navigation systems, and revolutionizing the global positioning system. At Atomionics, you will have the opportunity to design, prototype, test, refine and manufacture Quantum Gravity Sensors. You will develop solutions to improve the performance of our sensor, while also making it compact and robust for field deployment on projects around the world.

Atomionics is backed by some outstanding investors across private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other notable angels.

Responsibilities

• Design and fabrication of jigs, mounts, and fixtures for optics, electronics, and vacuum assembly.
• Create CAD models and engineering drawings, and select appropriate manufacturing processes forprecision manufacturing and fabrication of optomechanical components.
• Structural, vibrational, and heat transfer analysis (FEA) to ensure robustness in harsh environment
• Design temperature and vibration control systems for different subsystems.
• Liaise with our international supply chain partners located in China, France, Germany, India, Italy,USA, etc. and work within a multicultural team.

About you

• An absolutely driven individual with creative problem-solving skills, analytical mind, and persistence, ideally, demonstrated
• Highly skilled with CAD software: Autodesk Inventor / Solidworks etc
• Deeply knowledgeable in manufacturing techniques, surface finishing and assembly
• Skilled in GD&T for engineering drawings including tolerance stacks
• Skilled with hands-on fabrication including machining lathe, CNC, laser cutter, 3D printers

Even better if you have

• Experience in thermal design, including heat sinks, heat pipes, liquid heat exchangers, peltiers and FEA for thermal simulations
• Experience in designing simple PCBs & cable harnesses
• Been through a full product development cycle for a device with a complex system architecture
• Worked on personal hobby projects (and can brag about them!)

What we can offer you

• A chance to learn about the intricacies of deep-tech research, product development, and strategy in a high-growth startup while working with some of the best engineers and physicists
• Work on the cutting edge of quantum technology
• Develop robust applications for translational research
• Board games and curry night

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628