Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience
• Experience / knowledge in CMOS Image Sensor and Image Signal Processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

Roles & Responsibilities

Construction General Foreman Responsibilities:

• Ensuring teams work together to deliver quality work to strict deadlines.
• Monitoring construction processes, and providing training and team building sessions are required.
• Ensuring adherence to health and safety regulations at all times.
• Performing equipment, material, and routine site inspections.
• Scheduling regular meetings with vendors, site inspectors, managers, and staff.
• Writing up reports, budgets, project plans, and presenting them to relevant stakeholders.
• Working closely with architects and other professionals.
• Staying up-to-date with safety codes and advancements in construction.
• Assisting with the recruitment and training of new staff.
• Processing paperwork and traveling to multiple sites as required.

Construction General Foreman Requirements:

• High school diploma or similar.
• Bachelor's degree in construction, business, management, or engineering preferable.
• Experience in the construction industry required.
• Experience in a leadership role recommended.
• Valid driver's license.
• Excellent written and verbal communication skills.
• Ability to focus and keep calm under pressure.
• Ability to keep track of multiple projects.

Email resume to [email protected]

Key Responsibilities:

1. Recruitment and Talent Acquisition:Manage the full recruitment cycle, including job postings, interviews, and onboarding.
   Collaborate with department heads to understand staffing needs and develop job descriptions.
   
2. Employee Relations:Act as the first point of contact for employee queries and grievances.
   Foster a positive workplace culture and handle conflict resolution professionally.
   
3. HR Policy and Compliance:Develop, implement, and update HR policies in line with local labor laws.
   Ensure compliance with legal requirements and industry standards.
   
4. Performance Management:Facilitate employee performance reviews and provide guidance for professional growth.
   Support managers in identifying training and development needs.
   
5. Compensation and Benefits Administration:Administer payroll, employee benefits, and incentives.
   Ensure competitive compensation structures to attract and retain top talent.
   
6. HR Data Management:Maintain accurate employee records and HR databases.
   Generate reports on HR metrics for management review.
   
7. Training and Development:Organize training programs to enhance employee skills and knowledge.
   Evaluate the effectiveness of training initiatives.
   

Requirements:

• Bachelor’s degree in Human Resource Management, Business Administration, or related field.
• Minimum 1 year of experience in an HR generalist or executive role.
• Strong knowledge of HR best practices and employment laws.
• Proficiency in HR software and tools (e.g., [specific software if applicable]).
• Excellent interpersonal, communication, and problem-solving skills.
• Ability to handle confidential information with integrity and professionalism.

We are a team tied with strong bond, dedicated to bring one’s imagination of dream home to reality. ✨

We welcome anyone, including fresh grads from Poly and Uni, with the same passion into this big family, with or without experience in related filed.

What we provide:
- Training
- 40%-60% commission
- $2800-$6000 salary

Send your CV to:

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

The candidate is responsible for the preparation and submission of interior fit out / joinery product tenders including quantity takeoffs, pricing etc.

He/she must have the ability to work independently and under minimum supervision and capable of sourcing competitive materials costs.

Armed with experience in furniture or building/construction industry is an added advantage

Co-ordinate with Main Contractor / Consultants / Subcontractors on site

Conducts project site inspection on a regular basis

Report Progress claims and monitoring project activities

Monitoring daily process and progress at Project sites

Project planning, execute resource management and control

Attend site meeting

OVERVIEW

Responsible for designing and delivering customized logistics solutions that meet client needs and align with the company’s strategic goals. This role involves working closely with clients, internal teams, and external partners to develop and implement innovative logistics solutions, ensuring successful program execution from concept to completion.

ROLES AND RESPONSIBILITIES:

Solution Design and Development (Pre-sales)

• Collaborate with clients to understand their logistics challenges and business objectives.
• Develop tailored solutions that address client needs while optimizing efficiency, cost, and service levels.
• Create detailed solution proposals, including process flows, resource requirements, and timelines.

Client Relationship Management:

• Serve as the primary point of contact for clients during the solution development and implementation phases.
• Build and maintain strong client relationships, ensuring satisfaction and fostering long-term partnerships.
• Conduct regular reviews with clients to assess program performance and identify opportunities for improvement.

Continuous Improvement:

• Analyze the effectiveness of implemented solutions and recommend enhancements to improve efficiency and performance.
• Stay updated on industry trends, technologies, and best practices to drive innovation in logistics solutions.
• Lead initiatives to improve internal processes and methodologies for solution development.

JOB REQUIREMENTS:

• Minimum 5 years of experience in solution design from 3PL company.
• Tertiary education related to logistics/ supply chain management/ business/ engineering
• Experience in developing and implementing complex logistics solutions.
• Strong problem-solving and analytical skills.
• Excellent communication and presentation abilities.
• Proficiency in project management and logistics software tools.
• Ability to manage multiple projects simultaneously and work under pressure.

Only with 3PL experience may apply.

Salary shall commensurate with relevant experience.

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description& Responsibilities:

· Responsible for advanced optical module/ethernet product hardware system and circuit design, provide design reviews, drive system/product design trade-offs, make data driven design choices to define product architecture

· Responsible for new product design verification and characterization, conduct high- speed link simulation, failure analysis and debugging in NPI stages to optimize design and ensure performance.

· Work with cross-functional teams to develop new products that are time to market and superior in performance, quality and cost.

· Contribute to optical transceiver module/ethernet product architecture and engineering specifications based on product and customer requirements.

· Perform system performance validation and DVT test plans, debug and analyze test results.

· Provide design documentation and technical reports.

Qualification:

· Bachelor/Master degree or above in electrical or electronics engineering or related fields.

· More than 7 years of working experience in optical module/networking switch or relevant products design and development.

· Sound knowledge of optical transceiver standards, architectures and applications, well understanding of design & trade-offs with respect to size, power consumption, thermal management and manufacturing complexity.

· Solid understanding of high speed signal integrity and power integrity analysis and optimization on PCB/system channel link analysis, well versed in modeling and simulation using tools such as HFSS, ADS, SIWAVE, LTSPICE etc.

· Familiar with high speed digital and analog ICs (CDRs, DSPs, SerDes, TIAs, DC-DC Converters, LDOs).

· Knowledge in IEEE 802.3 Ethernet and PCIe spec will be a plus.

· Extensive experience with lab equipment such as Sampling Scope, RealTime Scope, Protocol Analyzer, BERT, PNA/VNA.

· A solid team player with strong leadership and inter-personal skills, able to take proactive, collaborative and creative approaches to innovate and influence for optimal results.

· Strong written and verbal communication skills.

· Willing to travel as require.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Highlights

• Good Working & Friendly Environment
• Passionate, energetic & innovative work culture

Roles & Responsibilities :

Job Responsibilities

· 3D Max & AutoCad

· Handle sale enquiries by communicating with the client to understand their needs.

· Provide advice on space planning, design conceptualization, material and colour scheme specification on client needs.

· Manage project costing, preparation of quotation accordance to customer needs

· Site coordination arranges and schedule the respective contractors & suppliers.

· Project completion on time.

Job Requirement

· Preferably specialized in Interior Design or equivalent.

· Outspoken, not afraid to speak with people

· Sales driven, motivated and self-empowerment

· Required language(s): English and Mandarin

Benefits

· Marketing Support & Leads provided

· Performance Bonus & Sales Incentives

· Career Development Opportunities

· Work Life Balance

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

Job Description

Business Development Manager

Roles and responsibilities:

· Canvasing of new business based on direct marketing and referrals

· Build and manage good relationships with new and existing clientele

· Handling client project inquiries on specifications and lead-time

· Conduct site-recce, sales, and tendering presentation

· Prepare quotation and Delivery Order

· Research, expand supplier/vendor listing on project-related

· Creating and presenting sales performance reports.

· Leadership responsibilities:

· Recruiting, training, scheduling, coaching, and managing a sales team to meet sales

· Objectives / increment

· Leading the team in both areas of direct marketing strategies and sales closing techniques

· Perform appraisal for team members, approving leave application and propose salary

· Tracking sales data to ensure the team member meets sales quotas

· Presenting team’s sales performance reports.

Requirement:

· Min. 5 years of sales experience in a similar trade (Large Format Printing, Events and Exhibition Builder)

· Sales track records and possess good leadership and managerial mindset

· Strong analytical, organizational, and creative thinking skills

· Excellent communication, interpersonal, and customer service skills

· Knowledge of modern marketing techniques

· High-level communication and networking skills

· Understanding of commercial trends and marketing strategies

· Good project management skills that include working collaboratively with designer,

· production, external contractor, and suppliers to complete each project

· Have not attended any salary support program such as PCP, PnT, etc.

Benefits:

· Yearly medical and dental claim

· Free NTUC membership and its benefit

· Work-related transportation claim

· Mobile Phone bill claim

· Yearly Performance Bonus

· Free Parking for the car owners

· Clear Career advancement within the production and operations hierarchy

Monthly Salary Range: $3,500

We are actively seeking two (02) experienced and dynamic individuals to join our sales team in the capacity of Senior Event Sales Executive (Event and Exhibition). Ideal candidates will come from related industries and possess a strong background in sales. The primary responsibilities of this role include managing both new and existing accounts, as well as generating leads through various channels such as marketing emails, telemarketing, networking, online presence, and social media platforms.

Job Description and Responsibilities:

• Flexible work schedule, with weekend work required only as needed.
• Cultivate and maintain strong relationships with both new and established clientele.
• Offer guidance and training to junior members of the sales team.
• Collaborate with the sales team to establish targeted sales objectives.
• Conduct site visits, sales presentations, and tender submissions.
• Prepare quotations and Delivery Orders.
• Research and expand the list of suppliers/vendors for project-related needs.
• Coordinate with in-house designers, printers, and production departments.

Requirements:

• Minimum of 2 years of sales experience in related fields (such as Large Format Printing, Events, and Exhibition carpentry).
• Demonstrated track record of successful sales in similar industries.
• Proficiency in analytical thinking, organization, and creativity.
• Exceptional communication, interpersonal, and customer service abilities.
• Familiarity with modern marketing techniques.
• Strong networking and communication skills.
• Understanding of commercial trends and marketing strategies.
• Effective project management skills, including collaboration with designers, production teams, external contractors, and suppliers to ensure project completion.

Benefits:

• Basic Salary: $3,000 to $3,500
• Commission: Based on 3% of nett sales onwards
• Overriding commission scheme on team’s effort.
• 5 days work week and weekend’s attendance only when required.
• Annual leave begins at 12 days on first year
• Transportation claim on work related $250 (Without own transport) or
• Transportation claim on work related $500 (With own transport)
• Comprehensive benefits package including medical, dental, transportation, and mobile phone bill reimbursement.
• Supportive and friendly work environment.
• Clear career progression opportunities, with the potential for advancement to a managerial role within the first year.

We are searching for reliable Event Ops Executives to join our capable team of professionals. The Event Ops Executives will be tasked with project coordination and administrative support. He/she will be reviewing specifications and preparing estimates, negotiating with the production team, sub-contractors, and vendors, as well as building relationships with clients.

What it will take to be a successful Event Ops Executives would be one that possesses a good personality and communication skills.

Roles and responsibilities:

• Assist project based on assigned sales representative.
• Office-based and will go on several site visits.
• Conduct site meeting, measurement, and photo-taking.
• Work on costing, budgeting, procurement, and project planning.
• Liaising with production head for internal costing and project management.
• Assist in managing and preparing quotation, based on compiled information for the events/renovation projects. This ranges from initial basic calculations, quotations, and Variation Order (VO).
• Allocate work to contractors and subcontractors to facilitate the smooth workflow process.
• Oversee installation on-site and resolve and project issues during the course of the project.
• Control project scope to meet project objectives to enhance project deliverables and key work activities.
• Review, prepare and submit tender project.
• Liaising with client on project’s requirement and showing samples.
• Review of operational, administrative system and improvement plan.
• Create and manages system and processes within the daily operations.
• Working collaboratively with both internal and external members. Such as the sales, designer, production, operations, subcontractor, and vendor.
• On-Job Training (OJT) provided.

Requirement:

• As On the job is training, no relevant work experience is required
• Good communication skill is needed for discussion with both internal and external members, such as the sales, designer, production, operations, subcontractor, and suppliers
• Familiar with the use of MS applications, such as Word, Excel, Powerpoint and Outlook
• Good with numbers which will be meant for computing costing and on-site measurement
• Knowledge of filing systems and processes

Benefits:

• 5 days work week and weekend’s attendance only when required
• 2% commission based on the net profit value
• Staff pantry
• Friendly and conducive environment
• Flexible working arrangement
• Clear career advancement
• Medical & Dental / Optical Claim

Our growing company is seeking to hire a sales manager who will be responsible for supervising and organising our sales team. You will oversee managing the team’s effort by developing sales strategies, outreach with team members, and coordinating with our marketing department on lead generation. You will also be tasked with overseeing the activities and performance of your sales team by tracking sales goals, setting individual sales targets, and facilitate the ongoing training of your salespeople.

In order to succeed in this role, you will need excellent communication skills and the ability to lead a sales team. Similar experience in a sales-related role as leader and within our similar trade is required. Event and exhibition carpentry, and large format printing.

Responsibilities:

• Building and managing sales team.
• Managing organisational sales by developing a business plan that covers sales, revenue, and expense controls.
• Meeting planned sales goals.
• Setting individual sales targets with the sales team.
• Tracking sales goals and reporting results as necessary.
• Overseeing the activities and performance of the sales team.
• Coordinating with marketing on lead generation.
• The ongoing training of your salespeople.
• Developing your sales team through motivation, counseling, and product knowledge education.
• Promoting the organization and products.
• Understand our ideal customers and how they relate to our products.

Requirements:

• Minimum 5 years of working in a same trade and capacity (Ex: Large Format Printing, Event and Exhibition related carpentry, Event Management...)
• Experience in planning and implementing sales strategies.
• Experience in customer relationship management.
• Experience managing and directing a sales team.
• Excellent written and verbal communication skills.
• Dedication to providing great customer service.
• Ability to build and lead a sales team.

Benefits:

• Basic Salary: $3,800 to $4,200
• Commission: Between 2% and 14% on individual net sales.
• Overriding commission scheme on team’s effort.
• 5 days work week and weekend’s attendance only when required.
• Annual leave begins at 14 days on first year
• Transportation claim on work related $250 (Without own transport) or
• Transportation claim on work related $500 (With own transport)
• Medical and dental claim

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team, ISP Design leaders in other sites, and Digital System Design Team
• Leading, supervising and mentoring a team of RTL design engineers

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 7+ years of Digital Design and verification related experience
• 3+ years project management / people management experience / skill
• Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Ability to lead teams and collaborate effectively with people in different functions
• Strong time management skills to ensure timely completion of deliverables
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 5 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 3 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

As a Marine Design Engineer, you will own engineering responsibilities for all Cavotec’s shipboard shore power retrofit projects. Type of retrofit can be either turnkey, repair and upgrading. Project execution takes place either during voyage or at shipyards, or at times, both.

Shore power/ HVSC/ Alternative Maritime Power (AMP)/ Cold-ironing system enables vessels to connect to shore power while at berth, hence minimizing emissions and noises from the ship’s auxiliary engines. The retrofitted system will be integrated with ship’s existing electrical distribution and necessary instrumentation and monitoring systems.

You will ensure the system design is in accordance with contract specifications, Class rules, and all applicable ship-type and port-specific regulations. You will also participate in the selection of equipment suppliers and service providers for all necessary 3rd party activities. You will have close interactions across all departments of the organization.

Responsabilities:

• Lead the design of shore power system retrofit solutions on vessels.
• Support Project Manager and sales teams throughout retrofit tender stage.
• Incorporate Cavotec’s shore power products on all retrofit solutions. Propose modifications of Cavotec’s products when required.
• Lead all technical discussions and review all technical proposals submitted by external stakeholders.
• Collaborate with marine retrofit team in ensuring retrofit solution is practical and cost-effective during implementation during voyage and/or at shipyard.
• Support marine retrofit team in the selection and management of equipment suppliers and service providers. This includes attending FAT of 3rd party equipments.
• Where required, to appoint and manage the deliveries of engineering contractors.
• Develop shore power retrofit engineering competencies within the organization.

Requirements:

• Degree in Electrical Engineering
• At least 3 years of working experience in the engineering department of shipyards, marine retrofit organizations or shipping companies
• Well-versed in IACS class regulations for merchant ship design
• Resourceful in the ship repair market
• Excellent communication skills
• Fluency in English