Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

About Syfe

Syfe is a digital investment platform with a mission to empower people to grow their wealth for a better future. Built on the pillars of advice, access and innovation, we cater to the full spectrum of an individual's wealth needs across diversified proprietary portfolios, cash management solutions and a state-of-the-art brokerage.

The Syfe team combines world-class financial expertise with best in-class technology talent. Excellence in execution is in our DNA and we offer equity ownership to all employees regardless of seniority and designation.

We are regulated by the financial authorities across Singapore, Hong Kong and Australia. In Singapore alone, where we are headquartered, over 100,000 investors trust Syfe to grow their wealth.

Since its founding, Syfe has raised US$79 million from world-class investors. The company has won multiple awards including Wealth Management Fintech of the Year by the Asian Banking and Finance Awards, as well as being recognized as one of the Top LinkedIn Startups in Singapore.

The Right Profile

We are looking for a Brand Art Director with strong design management experience. This candidate will work closely with the Head of Creative to develop Syfe’s design framework and put forth our brand for the world to see. While it’s not necessary to already have a deep understanding of finance, you should be keen to learn about investing. If you would like to design and showcase a brand that helps everyday people wrangle their hardest money problems, you are the one we are looking for.

Location: Singapore

Responsibilities

• Lead, ideate and execute design work for TTL and digital creative campaigns, across Singapore, Australia and Hong Kong.
• Collaborate with the performance advertising team to execute and develop a creative optimisation framework.
• Work with the social team on the development of a pipeline of consistent, unique and engaging social media collateral.
• Partner with external agencies on the execution and conceptualisation of creative work.
• Support the product team on the production/acquisition of brand-aligned design assets.
• Art Direction of static storyboards for the motion team to translate into motion graphics/animations.
• Development and governance of internally developed branding across creative and media touchpoints.

Qualifications

• 5-7 years of working experience either in an agency or an in-house design role.
• Proficiency with Photoshop, Illustrator and preferably Figma.
• A strong creative portfolio, demonstrating a diversity of high quality work.
• Strong interpersonal skills and ability to work effectively with marketing teams across regions.
• Prior experience working on brand guidelines and brand marketing campaigns.
• Prior experience working with product teams and some understanding of product design processes and requirements.
• Ability to handle a varied and diverse workload, while ensuring accuracy, timeliness and a high degree of attention to detail and a commitment to continuous process improvement.
• Passionate, dependable and able to work independently and collaboratively.
• Prior experience in startup is a plus.

You will thrive at Syfe if:

• You take initiative, act with drive and lead with an owner's mindset.
• You prefer open communication, remain humble and see feedback as a tool for personal and professional development.
• You flourish in a fast-paced and ever-changing landscape, where ambiguity is an opportunity to demonstrate your critical thinking and growth-oriented mindset.
• You come as you are. At Syfe, we believe in the power of diversity and are dedicated to creating a welcoming and innovative environment for all our employees. We embrace and encourage applications from candidates of all backgrounds and provide equal employment opportunities without discrimination based on any personal characteristic or status protected by law. If you require any accommodations to ensure a comfortable and positive interview experience, please don't hesitate to reach out.

Recruiting Process (estimated duration: 4 to 6 weeks)

If your application is shortlisted, please expect:

• Virtual introductory call with our Talent Acquisition Partner (15 min)
• Virtual interview with the Hiring Manager (45 min)
• Take-home case study (2-3 days)
• Onsite case study presentation with the Hiring Manager and relevant stakeholders (90 min)
• Virtual/Onsite interview with our Head of Marketing (45 min)
• Virtual/Onsite interview with our Head of People & Culture (30 min)
• Background and Reference Checks

Due to the volume of applications, we regret that only shortlisted candidates will be notified.

Job Descriptions

• Develop and Review Test Plan based on IC design specification
• Develop constrained-Random verification environment for complex DUT
• Develop/Modify Testbenches using UVM/SystemVerilog for Pre-Silion IP or SOCs
• Implement coverage matrix using cover point and assertion
• Create and debug tests for DUT
• Resolve bugs with remote designers

Requirements

• Bachelor/Masters Degree in Electrical/Electronics/Computer Engineering with min 1 year of experience
• Hands-on experience in Silicon/ IP verification using SystemVerilog/ UVM
• Strong understanding of verification process from test plan to coverage completion
• Strong communication and Analytical skills
• Understanding of HDL (Verilog, VHDL)
• Experience with designing with FPGA using Vivado is a plus

Highlights:

• Contract Duration: January 2025 – March 2025
• Salary: $10/hour
• Workdays: 3-5 working days (inclusive of weekends)
• Working hours: 9:45am – 7pm.
• Nearest MRT: Tanjong Pagar

Job description:

• Customer Service -- answer any guest enquiries.
• Maintenance of gallery equipments and artwork.
• Ushering and crowd control during busy periods.
• Handle Front Desk duties (e.g.: ticketing/cashiering)

Job requirement:

• Minimally GCE O level holder.
• Comfortable walking and standing long hours.
• Prior cashiering/ticketing experience is advantageous.
• Comfortable working on weekends.

Interested applicants, please apply by clicking on “Apply Now” or send your CV to [email protected]

Giovanna Widjaja

Outsourcing Team

Reg No: R22108890

BGC Group Pte Ltd

EA Licence number: 05C3053

Job Description
In your new role you will:

• Work as architect with system engineers to define IP specifications, architecture & test concept.
• Specify, rtl design and verify digital circuits in achieving high performance, low power, and efficient implementation for sensor IPs.
• Perform RTL design and behavioral model coding, Logic Synthesis, StaticTiming Analysis, and structural checks as LEC, Spyglass (Linting, CDC &RDC).
• Execute DFT/power integrity-related activities – Scan Insertion, ATPG &power analysis.
• Work with Physical designer to achieve timing closure and ECO fixes ifrequired.
• Conduct design reviews and support in documentation.
• Support verification engineer to define verification test items.
• Support in the roadmap formulation for the sensor IPs.
• Support view generation engineers to verify the correctness of the IPsviews.

Your Profile
You are best equipped for this task if you have:

• Bachelor/Masters Degree in Electrical Engineering or similar field with a focus on electronics.
• 8+ years of professional experience in the field of Digital Design with good knowledge of EDA tools (Cadence, Synopsys)
• Proven track record to formulate digital design architecture and concept& to work together in a team of designers.
• Proficiency in System Verilog and/or Verilog/VHDL for RTL design and verification tasks
• Familiar with the entire digital design flow as in LEC, Spyglass, defining constraints for synthesis, ATPG and primetime analysis.
• A good understanding of IP development flow , chip integration,timing-analysis, and testability.
• Knowledge in mixed signal IPs like ADC, PMU, oscillator and tempsensors would be an advantage.
• Basic Knowledge about Safety and Security standards and applications(e.g. ISO 26262 and ISO21434, respectively) – would be an advantage
• Good English communication and interpersonal skills.
• Strong analytical and problem-solving skills.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

We are seeking talented R&D Engineer to assist with the design and customization of our new/existing Vertical milling machine portfolio. In this role, you will be working closely with the R&D team to create functional design concepts, validate designs, and follow through from design stage to production.

Responsibilities:

• Developing new products and introducing innovative designs for our existing product series.
• Crafting customized machines to meet the unique needs of our diverse customers.
• Nurturing collaboration across various company departments, including Sales, Marketing, Product Management, Production, Supply Chain, Customer Support, etc.
• Mastering the art of designing rigid, high-accuracy structural parts, as well as lightweight components for rapid, high-acceleration applications, working hand-in-hand with our Simulation and Test Engineers.
• Pioneering the development of mechatronic units, integrating Pneumatic, Hydraulic, Servo-electric, and Sensor components to create seamless machine systems.
• Engaging in Concept Design, Structural Simulation, Detailing, Prototyping, Testing, Production, Customer Support, and Monitoring machine performance at our clients' sites.
• Leveraging our dedicated R&D Lab for innovative prototyping.
• Enjoying mentorship from seasoned senior engineers, guiding you on your career path to success.
• Embracing a global perspective by collaborating with an extensive network of Makino R&Ds, Sales Regions, and Key Suppliers.

Requirements:

• Bachelor's Degree in Mechanical Engineering from a reputable university.
• Passion for Product design.
• Excellent Problem-solving skills and able to work hands-on.
• Effective team player who is creative, meticulous, independent and responsible.
• Familiar in 3D modelling software such as SolidWorks and Simulation tools will be an advantage.

Job role:

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 3 years of work experience in the digital backend design field.

3. Hands-on project experience is required.

4. Tapeout experience at advanced technology is prefered.

5. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

The Architectural Design Manager reports to the Project Manager and Project Director and ensure all architectural works are carried out as per approved architectural drawings and specifications. He/She is to verify all interface details are carried out as per drawing plans.

• Plan, design and supervise the construction of buildings and other physical infrastructure.
• Coordinates and integrates engineering elements into unified design for client review and approval.
• Carry out Architectural work scheduling, material requisition, cost control, project supervision, documentation and seeking Client’s approval
• Produces conceptual plans, renderings, and documents.
• Engaged in preparing drawings and specification documents for the Conceptual Design Phase, Schematic Design Phase, and/or the Detailed Design Phase of a project.
• Works in tandem with Consultants, Sub-contractors as well as with other technical departments (Structural, M&E Engineers and Quantity Surveyors) on the design intent requirements and raise technical clarifications for smooth progress of work
• To resolve architectural related issues with stakeholders

Requirements:

• Degree in Architecture
• Minimum 10 years of relevant experience in LTA project or Building project

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples, mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 4 years of local working experience OR
• Diploma in Architecture with minimum 5 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

The Architectural Design Manager reports to the Project Manager and Project Director and ensure all architectural works are carried out as per approved architectural drawings and specifications. He/She is to verify all interface details are carried out as per drawing plans.

• Plan, design and supervise the construction of infrastructure.
• Coordinates and integrates engineering elements into unified design for client review and approval.
• Carry out Architectural work scheduling, material requisition, cost control, project supervision, documentation and seeking Client’s approval
• Produces conceptual plans, renderings, and documents.
• Engaged in preparing drawings and specification documents for the Conceptual Design Phase, Schematic Design Phase, and/or the Detailed Design Phase of a project.
• Works in tandem with Consultants, Sub-contractors as well as with other technical departments (Structural, M&E Engineers and Quantity Surveyors) on the design intent requirements and raise technical clarifications for smooth progress of work
• To resolve architectural related issues with stakeholders

Requirements:

• Degree in Architectural
• Minimum 10 years of relevant experience in LTA project or Building project.

JOB HIGHLIGHTS

· Machine design in Mechanical aspect, Jig and Fixture, Equipment and development

· Provide Conceptual, mechanical part detailing and cost estimation

· BOM & machine manual writing

· Handle customers’ enquiries and issues

· Conduct machine acceptance with customer

· Co-ordination with sub-contractors for machine build

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

REQUIREMENT

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

· Able to work independently and within schedule

THE ROLE:

As a member of the SoC Physical Integration team, you'll interface with various engineering groups, including architecture, design, CAD, software, and product engineering, across various geographies to work towards the physical/electrical verification and tape out of AMD SoC FPGA/ACAP devices. Common essential duties and responsibilities include, but are not limited to:

• Defining and developing flows and methodologies for chip level integration
• Developing tools for design verification or efficiency
• Designing (RTL and custom), verifying, and integrating FPGA/ACAP sub-blocks
• Coordinating activities between different design groups to ensure smooth integration
• Executing chip level physical verification
• Executing chip level electrical verification

PREFERRED EXPERIENCE:

• Basic understanding of FPGA architecture
• Knowledge of and/or experience with design and verification tools such as Virtuoso and Calibre
• Knowledge of and/or experience with P&R tools
• Fundamental circuit design knowledge including simulation experience with Spice and Verilog
• Strong debug skills
• Scripting experience using Perl, Python, TCL, C-shell, Make and/or other scripting languages
• Knowledge and experience with basic Unix data management and job control
• Excellent written and oral communication skills

ACADEMIC CREDENTIALS:

• BS with 2+ years of exp or MS in Electrical Engineering, Computer Engineering or related equivalent

LOCATION:

Singapore

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples, mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 6 years of local working experience OR
• Diploma in Architecture with minimum 8 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

About InterOpera

InterOpera (https://www.interopera.co/) develops digital infrastructure and solutions for environmental attributes. As part of the global transition to net-zero and sustainable energy, we streamline sustainability processes for businesses, aggregate green data, RECs, and carbon credits, and facilitate the entire lifecycle of green attributes—including registration, issuance, management, trading, retirement, and analysis. Our vision is to digitally bridge sustainability and financial markets for a connected and sustainable future.

About the Role

We are seeking a talented and dynamic Product Design and Product Specialist to join our team in Singapore. This hybrid role combines expertise in product management and design, with a strong focus on customer engagement. If you thrive in a collaborative environment, are passionate about user-centric design, and excel at aligning product strategy with business goals, we’d love to hear from you!

Key Responsibilities

Product Design

• Design user-centric solutions, including wireframes, prototypes, and user interfaces.
• Enhance user experiences through thoughtful design that aligns with the brand’s identity.

Product Strategy

• Collaborate with stakeholders to define and align product goals with business objectives.
• Contribute to product roadmaps and strategic initiatives to achieve market success.

Customer Engagement

• Interact directly with clients to understand their requirements and gather actionable feedback.
• Ensure product development aligns with customer needs and delivers maximum value.

Cross-Functional Collaboration

• Work closely with developers, marketers, and sales teams to ensure seamless product execution.
• Foster a collaborative environment to deliver cohesive and innovative solutions.

Iteration & Improvement

• Regularly analyze product performance metrics.
• Implement design and functional adjustments based on data insights and client feedback to ensure continuous improvement.

Requirements

• Experience: 3–5 years in product design, product management, or related roles.
• Technical Skills: Proficiency in design tools (e.g., Figma, Sketch, Adobe XD) and familiarity with Agile methodologies.
• Soft Skills: Exceptional communication skills with a strong ability to engage with clients and cross-functional teams.
• Problem-Solving: Strong analytical mindset with the ability to translate feedback into actionable product improvements.
• Customer Focus: Demonstrated ability to create solutions tailored to customer needs.
• UX/UI Knowledge: Understanding of UX/UI best practices and user research methodologies.

Compensation

• Base Salary: SGD 5,000 to 7,100 per month
• Additional Benefits: may offer equity or stock options.

Why Join Us?

• Opportunity to work in a hybrid role that combines creative and strategic responsibilities.
• Collaborate with a passionate team in a fast-paced, innovative environment.
• Contribute to impactful projects that directly engage with customers and drive business success.

If you are a forward-thinking professional with a passion for design and product strategy, we invite you to join our team and help shape the future of sustainable solutions.

Send your application to [email protected] to take the first step toward an exciting career with us.

Are you a talented Civil and Structural Engineer looking to take your career to new heights? We have an exciting opportunity that offers a generous remuneration package, unparalleled professional development prospects, and a clear path for upward progression.

The Role

The role reports directly to the team lead. He or She is responsible for supporting the Professional Engineers on the design and supervision of new erections, addition and alteration (A&A) work to existing buildings, earth retaining and stabilising systems, specialist designs for the facade, glass, demolition works etc, as well as temporary works. The role may also be required to conduct site inspections.

Responsibilities:

• Carry out detailed analysis and design of civil, structural, and geotechnical works;
• Prepare design calculation reports and structural drawings for authorities' submissions;
• Coordinate with various stakeholders such as clients, consultants, and contractors for projects; and
• Supervise and inspect construction works;

Requirements:

• Degree in Civil/Structural Engineering from a recognized Institution;
• Strong engineering fundamentals and analytical skills in geotechnical and structural analysis and design work would be an advantage;
• A good knowledge of the application of design and drafting software such as Autocad, Staad Pro, Plaxis, Prota, and Tedds would be an advantage;
• Candidates without working experience are welcome to apply.
• For more senior positions, at least 3 years of design experience for executive engineers and at least 5 years of design experience for senior engineers.
• Passing FEE 1 and FEE 2 are an advantage.

Vision:

To be a Civil & Structural (C&S) Consultancy firm recognised for innovative engineering solutions that are created in the course of work.

Mission:

To engineer construction solutions that create new values for all building stakeholders.

Benefits:

• Flexibenefits, Medical, rand Dental
• 13th AWS and Performance Bonus
• Group Insurance
• Training Grant and Education support,
• Miscellaneous allowance,
• Blue Sky Friday
• Bonding Events

Working Hours:

Regular hours, Mondays - Fridays

Dress Code:

Business (e.g. Shirts), Dress Down Day -Friday

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

We are a leading provider of arts education, offering visual arts classes, holiday art camps, and events for children and adults worldwide.

With a mission to inspire creativity and self-expression, we create educationally rich environments where imagination thrives.

Join our team and help shape the future of art education in Singapore!

About the Role:
As an Art Studio Manager, you will oversee the daily operations of three studios located at Great World, Tanglin Mall, and Jurong East. This dynamic role requires you to manage studio performance, ensure operational excellence, and nurture customer relationships. Your responsibilities include:

• Overseeing daily operations and managing team performance across all studios.
• Scheduling weekly team shifts and facilitating in-house training sessions.
• Managing customer accounts, addressing inquiries, and following up on leads.
• Monitoring and restocking studio resources to ensure smooth operations.
• Ensuring studios are clean, organized, and safe.
• Conducting weekly team meetings to align on goals and updates.
• Leading hiring processes for new teachers and staff.

This is a 5½-day workweek role. Flexibility is required to travel to all three locations.

About You:
We’re looking for a motivated and results-driven individual with a passion for arts education and team leadership. Ideal candidates will have:

• Proven customer support and sales experience.
• At least 1 year of supervisory experience.
• A minimum of 1 year of experience working with children.
• Strong organizational skills and attention to detail.
• Self-motivation and a results-oriented mindset.

What We Offer:

• A chance to lead and inspire a talented team.
• Opportunities for professional growth in a creative environment.
• The satisfaction of making a meaningful impact on students’ lives.

Next Steps:
Ready to take the lead?

Apply directly via the website or send your resume to [email protected].

We look forward to welcoming you to our creative community!

EA Registration No.: R23111820 (Ben Chang)
EA Licence No.: 22C1307 (First Konnection Pte. Ltd.)

Job Highlights:
✅ Competitive salary
✅ Career growth opportunities
✅ Work with advanced technologies
✅ Collaborative team environment

Job Description:

• Collaborate with the design team to develop chip floorplans, clock structures, and power plans.
• Perform physical design tasks from Netlist to GDSII, including placement and routing (P&R), formal verification, and static timing analysis (STA).
• Conduct physical verification (PV) and power integrity analysis to ensure design reliability.
• Optimize designs for power, performance, and area (PPA) while adhering to project requirements.
• Research and implement methodologies for advanced process nodes.
• Develop and maintain automated physical design workflows and tools.
• Ensure designs meet quality and performance standards for tapeout readiness.
• Troubleshoot and resolve physical design issues during development.

Requirements:

• Bachelor’s degree or higher in Electronic Engineering, Microelectronics, or related fields.
• 3+ years of experience in digital backend design (5+ years preferred); tapeout experience is a plus.
• Proficiency in TCL, Perl, or Python scripting and EDA tools is an advantage.
• Strong communication, teamwork skills, and self-motivation.
• Competitive salary for outstanding candidates.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Lee Cheng Yin (Gina) (R22104523)

EA License No: 20C0358

Job Summary:

Based in our Singapore office, you will join our IC Lab team as a Verification Engineer. In this role, you will develop and implement advanced verification methodologies, including UVM, SystemVerilog, and SVA, for cutting-edge projects. You will also work with platforms like Palladium Z1, HAPS, and Zebu to deliver high-quality verification solutions.

What you will be responsible for:

• Apply UVM (Universal Verification Methodology), SystemVerilog, Verilog, and SVA (SystemVerilog Assertions) languages in verification tasks
• Develop and implement state-of-the-art verification methodologies, including UVM, C/C++, co-simulation, system emulation, and mixed-mode simulation/emulation
• Contribute to projects requiring advanced verification tools such as Palladium Z1, HAPS, and Zebu platforms
• Collaborate effectively within a team, ensuring high-quality deliverables

How you will stand out:

• Possesses a Masters or Bachelors degree in Electrical Engineering or Computer Engineering
• At least 3 years of relevant experience
• Proficient in UVM, SystemVerilog, Verilog, and SVA languages
• Strong knowledge in protocols such as SPI, UART, and I2C
• Possesses knowledge of firmware development and in depth understanding of firmware development processes
• Excellent team player with strong communication skills.
• Highly driven and detail-oriented.
• Has experience working with advanced verification platforms like Palladium Z1, HAPS, or Zebu.

What you will experience working with us:

• A culture that values authenticity and diversity of thoughts and backgrounds;
• An inclusive and respectable environment with open workspaces and exciting start-up spirit;
• Fast-growing company with the chance to network with industrial pioneers and enthusiasts;
• Ability to contribute directly and make an impact on the future of the digital asset industry;
• Involvement in new projects, developing processes/systems;
• Personal accountability, autonomy, fast growth, and learning opportunities;
• Attractive welfare benefits and developmental opportunities such as training and mentoring.

--------------------------------------------------------------------

Bitdeer is committed to providing equal employment opportunities in accordance with country, state, and local laws. Bitdeer does not discriminate against employees or applicants based on conditions such as race, colour, gender identity and/or expression, sexual orientation, marital and/or parental status, religion, political opinion, nationality, ethnic background or social origin, social status, disability, age, indigenous status, and union.

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Position: Design & Marketing Executive
• Location: Near Tai Seng MRT
• Working hours: 5 days, Monday to Friday (9.00am - 6.00pm)
• Salary (commensurate on experience): Up to $4200+ Variable Bonus + Medical Fees of $500 annually
• Duration: Permanent
• Industry: Garment

Main Responsibilities:

• Assist Manager in campaign planning, execution and all marketing related matters
• Manage external vendors for SEO, SEM strategies
• Propose and plan all relevant social media and digital content calendars aligned to the Marketing Calendar (IG, Linkedin etc.)
• Manage, create and copywriting work of all marketing materials including product catalogues, corporate presentation, promotional flyers, advertising materials, etc.
• Be involved with photography for all social media platforms and keep websites up to date
• Keep current and abreast on all digital content trends and conduct market research and competitor analysis
• Assist to coordinate and liaise with media to secure brand exposure and relevant partnerships
• Manage all product related information update on website
• Weekly & monthly report analysis for campaigns and engagement
• Any ad-hoc duties as assigned

Requirements:

• Diploma or Degree in Marketing or related discipline.
• At least 1-2 years of relevant experience
• Knowledge in textile, garment construction, design and development is added advatange
• Bilingual in English and Mandarin to liaise with Mandarin speaking customers only

Email me at [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.